Buy White-Rodgers NP100 Electronic Non-Programmable Single Stage

Customer Ratings:

Previous reviewer stated that two red wires were required for this thermostat. They are mistaken. The instructions clearly state that if you do not have separate wire for RC and RH terminals. You install a jumper wire between these two terminals. It is very rare to have separate wires going to each of these terminals. Normally jumper comes pre installed or provided. Install the jumper between the terminals and your problem is solved.

Click Here For Most Helpful Customer Reviews >>

Does what it's supposed to do and seems to do it well. I was looking for a simple, non-programmable thermostat and this one fit the bill. Very easy to install -I did it myself, but I am fairly handy around the house.

UPDATE: I installed this thermostat in the winter and it worked well. It is now summer and I was trying to get the AC to come on. Well, this thermostat requires TWO RED wires coming from the wall but I only have one. As a temporary measure I have switched the one red wire into the area on the thermostat marked RC (for Red Cooling). It was in the RH slot (Red Heating). In the winter I will have to switch the red wire back to the RH slot. Or find another non-programmable thermostat that only requires 1 red wire. I found an extra unused blue wire, but that did not help.