Review of Danby DKC5811BSL Keg Cooler - Stainless Look

Customer Ratings:
List Price: $649.99
Sale Price: $449.10
Today's Bonus: 31% Off

The Danby DKC5811BSL 5.8 cu ft kegerator is a very good unit for the price. Plus it is American made! That is not the case for the majority of inexpensive kegerators out there. That being said, since this is an inexpensive model there is good and bad. First let's go with the good: A 5lb aluminum CO2 tank, dual gage regulator showing tank pressure and beer line pressure, enough room to hold two 1/6 kegs without a problem, no problems holding temperature of the keg at 36 degrees, externally mounted CO2 tank to extend the refill time of your CO2, includes a good D type coupler to connect the keg, it looks good. Now for the bad: This is a cold plate refrigerator, so the temperature is constantly fluctuating and a circulation fan is needed (I used a 120mm computer fan with 4 screws to hold up off of bottom and an old 6v cell phone charger to power with the line run through the same hole as CO2 line), Some type of tower cooler is needed otherwise your first beer poured will be foam if sitting unused for a while (I used an old 3 inch computer fan I mounted to a box that I laid in the bottom of kegerator with hose going up into tower), beer line is only 5ft long...which is not a problem for most beers but light beers requiring higher pressures (greater than say 12psi) may cause foam because of speed of flow...a longer beer line would solve that, the pressure CO2 line comes with plastic clamps...need to replace with metal to ensure no CO2 leaks, the 17 inch ¼ or ½ oversized coors/miller kegs do not fit (kegerator is only 16¾ inches deep). Besides a couple of these small modifications needed it is a very good kegerator!

Click Here For Most Helpful Customer Reviews >>

I bought a multitap head (3) and love everyting about it. I'm a homebrewer and can fit 3 of my kegs in there. Highly recommed!

Best Deals on Danby DKC5811BSL Keg Cooler - Stainless Look

working on my third keg and has worked great since i assembled it .It will also get really cold.I had it set at 8 to 9 it froze the beer lines had to turn it down.

Honest reviews on Danby DKC5811BSL Keg Cooler - Stainless Look

The kegerator looks great and very professional. It is easy to get started with great directions, and works even better. We love it!

Find helpful customer reviews and review ratings for Danby DKC5811BSL Keg Cooler - Stainless Look

Well, when the box arrived, it was all beat up. After I cut the straps, the box basically fell apart. The front door of the kegerator has dents in it. I assembled the unit per the instructions. The next day I fired it up. On the coldest setting it froze the inside. Several days later, I bought my first keg. Oh my, this is good! The beer is cold, it works great, and I am pleased so far. However, the tap faucet drips. I need to figure out why, but I will wait until I drain this keg! I am considering doing what some others has suggested, building a small fan assembly to help circulate the air, especially up into the tower. I feel it was a good deal and a nice investment for the football season! I just wish the door did not have dents. They are small cosmetic dents that do not effect the operation.