Buy Suncourt DS100 DuctStat Plug-In Thermostat

Customer Ratings:

I installed an exhaust fan in my garage. I wanted it to come on and go off automatically. I bought the Duct Stat for this purpose. I mounted the Duct Stat to a rafter in the garage, making sure the air hole in the back was unobstructed. I plugged the Duct Stat into a 110v outlet that was all ready installed in the garage. Then I plugged the fan into the Duct Stat. Here is how I set the temperature: First I put a thermometer in the garage. When the temperature in the garage reached the temperature I wanted the fan to come on, I set the Duct Stat. I moved the switch on the Duct Stat to heat. This sounds backwards but it's not in this case. Remember this devise was designed to be used in ducting. I moved the adjustment screw until the fan came on. No need to move it anymore. When the temperature gets to the set point the fan comes on. It will stay on as long as temperature stays above this point. If the temperature drops below this point it will turn off. This setup works perfectly and keeps my garage a lot cooler in the hot summer months.

Click Here For Most Helpful Customer Reviews >>

Works great!!! Would recommend. Simple to install easy to set runs two 6" fans flawlessly. Balanced the heat in the two farthest rooms in my house.

Best Deals on Suncourt DS100 DuctStat Plug-In Thermostat

We live in Maine and we have an air-tight fireplace to supplement heating in our home. It has a cement block air chamber around it with a 110V fan used to move air from floor level ... through the air chamber area ... and then out into the home via slotted vents in the chimney above the fireplace. The problem was that we would turn off the fan when we went to bed so that it would not run all night after the fire died out and thereby loose out on circulating the heat during those first several hours when the fire was still burning. So ... I ordered the DuctStat (which arrived on time and in good condition) hoping to automate the fan to turn on when the heat in the air chamber reached about 75, then continue to run until the fire died out and the temperature dropped below 75, hence turning off the fan.

When I received the DuctStat I used a hair dryer and IR temp gun to set the ON/OFF point and then plugged it into the fans electrical circuit. We used it last night and it worked perfectly. I am very happy with the results so far and if it continues to operate as it did last night, I would give this product the fifth star.

Honest reviews on Suncourt DS100 DuctStat Plug-In Thermostat

The DuctStat 100 thermostat seems like a nice little unit for what I'm doing, but so far the first one they sent was defective. I'm hoping the relacement works. I can't give it more than 2 stars until I see it work!

Also, ClimateDoctors didn't put enough postage on the first shipment so I had to go all the way down to the post office to pay the postage due before I could receive my package. To their credit, ClimateDoctors gave me a rapid refund of the postage due.

Find helpful customer reviews and review ratings for Suncourt DS100 DuctStat Plug-In Thermostat

This was easy to install, and worked fine, but only for a few weeks. I should have believed the other reviews.