Showing posts with label double pole thermostat. Show all posts
Showing posts with label double pole thermostat. Show all posts

Saturday, February 7, 2015

Review of Dimplex Timothy Mantel Electric Fireplace in Burnished Walnut

Dimplex Timothy Mantel Electric Fireplace in Burnished Walnut
Customer Ratings: 4 stars
List Price: $1,949.00
Sale Price: $1,499.00
Today's Bonus: 23% Off
Buy Now

I have owned this fireplace for about a month and it has been fabulous. The Symphony flame effect is the best I've ever seen and I've owned 3 others, though not in this price range. The Timothy came disassembled in a large box. It was packed well and there was no shipping damage. However, I found several of the assembly screws rolling around inside the shipping crate. Thankfully, I was able to find all of them. The high quality of the wood and finish was evident upon opening the box. I quickly unpacked it and began assembly. The instructions were fairly basic and probably aren't required to assemble the fireplace as there are only about 10 parts to the fireplace. The firebox simply slides into place and is not really attached to the wood mantel. I assume this eases filter replacement. This is an excellent fireplace. The only noteworthy complaints are: (1.) The simulated firestarting mode (where the fireplae can slowly build and extinguish) does not work (not really a problem for me as I don't mind it turning instantly on or off). However, as this is an advertised feature and described within the operating manual, it is worthy to note. (2.) The sliding firebox will likely end up scratching the wood on the bottom of the fireplace over time so I consider that a design flaw. (3.) there was a small but noticeable gap between two pieces of the mantel. It isn't large but large enough that light could be easily seen streaming through. I fixed that with a 2 foot long piece of electrical tape applied to the inside/rear of the mantel.

Click Here For Most Helpful Customer Reviews >>

Friday, September 5, 2014

Discount AcuRite 00795 Galileo Thermometer with Glass Globe Barometer

AcuRite 00795 Galileo Thermometer with Glass Globe Barometer
Customer Ratings: 4.5 stars
List Price: $37.50
Sale Price: $31.64
Today's Bonus: 16% Off
Buy Now

I bought this just to have something cool on my desk, and I love it! It looks great on the corner of my desk, and reminds me of the little bubbling lites that used to be on my Christmas tree when I was a kid.

I only gave it four stars because it's obviously not 100% accurate, and the barometer is a little hard to fill. It comes with a syringe and tube to fill it, but the tube takes awhile to thread into the barometer. It also takes three syringes full to get the barometer to a good level.

Amazon doesn't give measurements, but the base is about 8" wide, the Galileo thermometer is about 8" high as well, and the glass water barometer is almost 7" high.

Click Here For Most Helpful Customer Reviews >>

I bought this as a birthday present for my fiance and he LOVES it. It looks great on a bookshelf or desk, and is a great conversation starter. I didn't have any problems filling the barometer (instead of taking the tube out of the barometer to refill, simply take the syringe off the end of the tube). Overall it is a great product, and a very cool design!

Best Deals on AcuRite 00795 Galileo Thermometer with Glass Globe Barometer

I purchased this item, and the 17" stand alone thermometer model. I knew nothing about barometers. I knew nothing about Galileo thermometers. I use this model in my living room.

The weather glass does indeed respond to pressure changes, and does a nice job of predicting foul weather. The thermometer is accurate, easy to read (and interpolate). It only works in a range of 64 thru 80 degrees F, but anything above or below those readings is likely to require I do something with the heating and cooling around my house, so it tells me what I need to know.

I think this is a great gift for kids interested in science. I have other weather glasses too, but this one comes in combination with a neat, accurate thermometer. I'm not a kid anymore, but I find it fun, as well as useful, myself.

Honest reviews on AcuRite 00795 Galileo Thermometer with Glass Globe Barometer

Very cool to have on your desk! I would of given it extra stars, but setting up the barometer can be tricky if you do not follow the directions exactly, and you do NEED to have sterile/distilled water along with food coloring (any color but I like blue as shown).

Also, if you put too much water or not enough water into the barometer, you have to use the syringe and little hose to take the water out. HOLD onto the syringe and hose, DO NOT throw away as you never know when it'll come into handy again.

As for the Galilio thermometer, that's pretty accurate and cool!

For those real weather geeks out there I say to get the biggest Galilio Thermometer (it's TWO FEET TALL) and can be purchased through Amazon 3rd party sellers. That one gives you 2 deg temps and is a nice thing to have in an office or desk.

Find helpful customer reviews and review ratings for AcuRite 00795 Galileo Thermometer with Glass Globe Barometer

I was excited about this piece when I ordered it for my office, however, although it looks nice, it is not as big as I expected. The temperature is showing 4 degree Fahrenheit increments (64,68,72,76,80) which is not as precise as I'd like. The main problem however surfaced two weeks after receiving this. Weather glass initially couldn't fit in its hole in the wooden stand, but since the misfit was minimal, I mistakenly decided to sand the hole and make it fit instead of returning the whole set and waiting for the replacement. Since there was no wood polish left, this later resulted in a cracked glass over the weekend when it got sunny in the office, some water overflew and wet the stand, the wood contracted and cracked the base of the bottle, and all water leaked to the desk. So if you receive this and it doesn't fit, you better quit (return it). Otherwise, I really like the thermometer because it confirms my belief in analog scales one glimpse and you know where you're at, and here's the analogy with my moods:

red, blue and orange up: it's too cool for most people, but kewl for me

both blue and red up: good work environment for me,

only red up: I'm hot,

red down: I'm miserable and ready to leave the office because I can't work in such heat.

Summary: Nice looking toy for grownups.

Buy Fom Amazon Now

Sunday, August 17, 2014

Best Amico 5 x KSD301 NC Thermostat Temperature Control Switch 105 Deals

Amico 5 x KSD301 NC Thermostat Temperature Control Switch 105 Celsius 250V 10A
Customer Ratings: 5 stars
Buy Now
They arrived in about a month and this company has great customer service.

These thermos are to be surface mounted if you need to know that.

Best price around.

Click Here For Most Helpful Customer Reviews >>

Wednesday, May 21, 2014

Buy Sunpentown Digital 14,000 btu portable air conditioner with remote

Sunpentown Digital 14,000 btu portable air conditioner with remote control and heater
Customer Ratings: 2 stars
List Price: $815.00
Sale Price: $400.00
Today's Bonus: 51% Off
Buy Now

I'm an air conditioning contractor and purchased this item to cool my insulated garage. When I finally got it together and turned it on, the compressor didn't come on for a few minutes. When it did, it cooled like it should. But after about 5 minutes the compressor turned off. Probably on high pressure. It was only 88 in the garage. This thing should be able to handle that load. The controls are easy to figure out but the air outlet only adjusts left or right. You can't change the discharge direction up or down. So the cool air (when the compressor is running) hits me in the thighs, I would rather like to be able to direct the air discharge up and across the area for better circulation. Overall, this is a big disappoinment. This item maybe useful as a supplemental A/C, like in a room that doesn't cool well. But don't depend on it to cool a room by itself. It won't be able to handle the load.

Click Here For Most Helpful Customer Reviews >>

We have the WA-1220M model of this product (virtually identical). If you stand right in front on it, up to about 5 feet away, it's nice. However, it has several drawbacks:

1. It isn't very good at drying the air; evaporation is needed for effective air-conditioning (whether in your car or your home).

2. It must be drained of the water it does pull from the air, and draining the unit is very cumbersome. It comes with a small flexible plastic tube that has to be connected to the rear bottom of the unit; the other end must be lower in order to drain or the unit really does very little and although there's an indicator light that will come on if the unit is quite full of water, it's very rare that the light comes on (and it only does so LONG after the unit has stopped cooling the air). We have taken to wrapping a large towel around the far end of the tube to collect water that drains, but basically you must tilt the heavy unit backwards to try to drain it. This is not particularly effective but it must be done.

3. It has wheels, but it doesn't roll easily (it's hard to push or pull it in a straight line and the wheels are so small even getting over a low rug is difficult.

4. Moving the unit up or down a single step can be accomplished by one person but since the entire unit is made of very smooth, slippery plastic (it has handles but they're very shallow & not helpful), it's more safely accomplished with two people.

5. Consider that this unit, while mobile, sacrifices a good window seal. The large exhaust hose (which pumps the hot air outside) resembles a telescoping dryer hose that easily falls out of the backside of the unit and is awkward to extend evenly. The unit comes with a smallish piece of foam with a cutout hole for the hose. However, you are left with having to find some way to block the rest of whatever window you choose to put the hole into. We use a large carboard box panel and cut a hole out of, then duct-tape the box into the window opening to block out air seepage. As you can imagine, it looks pretty tacky.

We wouldn't buy this again.

Buy Fom Amazon Now

Friday, February 21, 2014

Reviews of Qmark HBB500 Electric/Hydronic Liquid-Filled Baseboard Heater - HBB

Qmark HBB500 Electric/Hydronic Liquid-Filled Baseboard Heater - HBB Series Navajo White
Customer Ratings: 5 stars
List Price: $329.80
Sale Price: $165.81
Today's Bonus: 50% Off
Buy Now

Works quite well. Arrived in 2 days in perfect condition. Best price available. Using to kill the draft from an RV window. Fits in the small space available and now our feet don't freeze when we sit on the sofa at night.

Click Here For Most Helpful Customer Reviews >>

Tuesday, February 18, 2014

Lasko 5572 Oscillating Ceramic Tower Heater with Remote Control Review

Lasko 5572 Oscillating Ceramic Tower Heater with Remote Control
Customer Ratings: 4.5 stars
List Price: $114.99
Sale Price: Price Unavailable
Today's Bonus: 22% Off
Buy Now

Just got this tower heater today. Observations so far:

-I deducted a star because it's a bit wobbly on carpet and on ceramic tile. It's probably too heavy to tip easily, but it bears mentioning. It's quite tall. The space saving of a tower heater is perfect for my small motorhome, so I live with wobble. No idea how this could be corrected without creating unwanted bigger footprint or weight.

-I put it in a different place during the day, so the carry handle is convenient.

-It seems to be more powerful than my smaller Lasko tower heater, even though the watt settings are the same as the smaller heater. Maybe it's more efficient.

-The front definitely needs to be located a yard from any flammables, because the heat coming out is too hot to hold my hand two feet in front of it, even on low, for more than a few seconds.

-The remote is simple to use. The remote's buttons could be more differentiated for easier operation in the dark.

-The controls on the heater itself are cheesy looking, and the engraved silver-on-silver labels are difficult to read in shadow.

-I would like to have the thermostat work on the low setting. In both my Lasko towers the thermostat works only on high. Freeze or fry.

-The heat and blower can't be felt at the bottom foot or so. I can put it almost anywhere, and it won't bother the cat on the floor. The downside is that the lowest part of the room isn't heated.

-There's a clip on the back that holds the remote. It would be great for Lasko to include a second one of those cutom fitted clips to be able to attach to a wall to hang the remote near where it will actually be used.

I phoned Lasko to get some help comparing the various heaters, of which they list 19 in the tower design alone. Basically I was told I had to figure it out myself from whatever product descriptions they provided online. Fortunately Home Depot online makes an effort to help compare multiple products; although, it's limited to what they offer, of course. Both HD and Walmart carry this model, but neither had it in stock. Prices were the about the same, and I saved tax and shipping with my Prime membership by purchasing through Amazon.

Click Here For Most Helpful Customer Reviews >>

I recently purchased the LASKO 5568 and liked it so much I decided to get another; wound up getting this model instead and can't say enough good things about it. The design is well conceived, solid quality construction, and very effective. Throws out a considerable amount of heat, the fan is very quiet at both high and low, and the options for operation are all useful and work well. Lasko seems to manufacture a series of these ceramic tower units and all are very well reviewed; I checked the review on bestcovery.com and this unit was rated number 1, and for good reason. I use both these heaters in larger rooms (14 X 26) with 9 ft. ceilings and they are effective in taking off the chill and keeping the room comfortable. The fan on this model is so quiet on low I can barely hear it, yet it continues to put out a steady stream of hot air. Appears to be a quality product built to last, and at $68 you get a LOT for your money, I rate this a best buy as well.

Best Deals on Lasko 5572 Oscillating Ceramic Tower Heater with Remote Control

We were looking for another space heater and a friend recommended the Lasko Ceramic Tower. We purchased a later model, and there were some improvements, such as the carring handle. It is light weight and easy to carry to different locations. It does a very good job of heating the room. We live in North West Tennessee and with the combination of another space heater, we have not used our furnace at all this year. The electric bill has dropped dramatically. We will be purchasing another Lasko next winter. Lasko 5572 Ceramic Tower Heater with Logic Center Remote Control

Honest reviews on Lasko 5572 Oscillating Ceramic Tower Heater with Remote Control

My bedroom averages 56 degrees in the winter. I freeze when getting dressed or when I first get into bed. I now set the heater to 65 degrees and in no time the large bedroom is cozy even though there are cathedral ceilings. I'm sure if I wanted the room warmer the tower would bring the temperature up higher. I also like the way the Lasko 5572 oscillates. I would recommend this heater to anyone who needs to heat a room and keep it at a consistent temperature.

Find helpful customer reviews and review ratings for Lasko 5572 Oscillating Ceramic Tower Heater with Remote Control

Just bought and received this through Amazon. A family member recommended the Lasko brand after his purchasing a few different models and sizes himself in the past three years.

After further researching different models and brands, I purchased this one because it rated highly on Amazon.com and other sites -including bestcovery.com -in the Top 5 for Best Tower, Best Large Room, and Best Oscillating.

Below I'll describe a few things to help others trying to decide....including why I was looking, features I sought, setting it up, and how it performed first two days.

WHY: I live in a cold, damp geography during winter and the home's central electric heat seems to be on all the time. Needed something for a large open living/dining/kitchen poorly insulated space on the first floor ~800 sq ft, which is typically colder.

FEATURES SOUGHT: Specifically, features I wanted and influencing my decision for this model:

--Ceramic (no open heating elements)

--Powerful ~1500 watts (for large space)

--Automatic Thermostat / Auto Temp Control (for minimal muckying around myself)

--Long Timer (8 hours)

--Timer Self Shut Off

--Oscillating (for better heat distribution)

--Remote (for use in other rooms)

--Wider/heavier at bottom than top (for better stability)

--Slim & simple design to be as inconspicuous as possible

--Simple heat fan speeds (High/Low, again for least muckying)

--Price (close to $50)

I already had a HEPA air filter/ionizer in the space, so didn't need the filter function.

Other models I compared to had shorter timers, lower wattage, smaller size, no oscillators, and/or no remote.

SET UP: Received the box undamaged, opened and set it up. At under 6 lbs, the unit was light weight enough for little ol' me to pull out of box and stand without strain. ;-)

Handle on top / back is a generous size to be able to move the unit a few inches with a single hand.

Read instructions, plugged it in, turned on power, and the unit did what the instructions said. It started on high and read current room temperature at 63*F. Followed instructions to use buttons, then set C or F, target temp to 75*F, and oscillating on.

PERFORMANCE FIRST TWO DAYS: Very impressive. It began pumping solid heat on high. Within an hour it read 70*F in the space, and within two hours it read 73*F. Checking against another thermometer I had, it was only about a degree difference. Within 3 hours, it read 75*F and turned itself off for a bit. It's a large space, so I was pleasantly surprised. Concluded the time it took to get to 75* was a function of the inherent coldness and lack of insulation in the space, not of the heater output.

THINGS I NOTICED RIGHT AWAY:

--Be sure to have two AAA batteries handy when it arrives to install in remote. Unit ships without batteries.

--Heat output is clearly noticeable.

--Oscillating function makes no noise.

--It's the high fan setting that makes a moderate volume whir. Low fan noise is barely noticeable.

--Font size of the Temp display is large ~3/4" and easily readable, on both the unit and remote, so I don't have to use reading glasses.

--Remote is very light weight. It works from as much as 20' away, but main unit display needs to be facing where you/the remote are.

--Beeping happens for every press on both unit and remote, but it's a reasonable volume. Folks with sensitive sleeping children may want to really consider this. It'd be nice to have a High, Low, or Mute volume setting, but for the price and knowing this model didn't have one, it's acceptable.

OVERALL: Great unit, works well, as promised, and I'd definitely buy this Lasko again.

NOTE: I also ordered a DeLonghi comparable model for the master suite, and am awaiting shipment/receipt. It has had similar Top Tower reviews. Unlike this Lasko model, I ordered the DeLonghi TCH7690ER Safeheat

specifically for these functions I needed for the master bedroom space:

--Fan-Only function without heat for summer use summer

--24 hour timer

--Air/dust filter

--Tip over safety turn-off

Once received, I'll try to post a review of it.

Happy sleuthing!

Buy Fom Amazon Now

Thursday, February 6, 2014

Reviews of Weller WTCPT 60 Watts/120V Temperature Controlled Soldering Station

Weller WTCPT 60 Watts/120V Temperature Controlled Soldering Station
Customer Ratings: 4.5 stars
List Price: $176.00
Sale Price: $139.35
Today's Bonus: 21% Off
Buy Now

This kind of soldering system has been industry standard since the 1950's. I learned to solder to military specifications on one of these stations back in the 1980's and used it in bench repair of avionics equipment for over 20 years. I own several surplus stations that I use in my ham radio hobby at home.

In later years I used much more expensive solder stations with higher tech temperature control methods and slimmer pencils, but I found them to be only marginally better, and so much more expensive that I didn't see any need to buy one for home/hobby use. While the more expensive systems have complex configurations that aid some surface mount work, they were not worth the hefty price for regular through-hole and point-to-point soldering.

The tips are readily available, in a considerable variety, and are very reasonably priced. The other components of the system are also readily obtained and reasonably priced. If you wear out the iron or have some mishap with the cord, repair is not a big deal.

The reason I am taking off one star is the current physical packaging. The earlier WTCPN station was taller and heavier, with the sponge and iron holder integrated into the top. That configuration was superior because the base was heavy enough to stay put in the course of removing and replacing the iron, and swiping the sponge.

There is a set of keyed slots on the WTCPT that enable the iron holder to be fastened solidly to either side of the power unit, but access to the sponge is obstructed from one side. In practice, a quick side to side swipe is normally used to clean the tip, and this is not possible with the sponge blocked from one side or the other by the power unit.

The customer image that shows the iron holder perched on top of the power supply is a great idea, but I would secure it in place with cable ties or some other means, so that it doesn't go skittering off when being used.

This is a tried and true tool for soldering, at a very reasonable price.

Click Here For Most Helpful Customer Reviews >>

I solder about 300charms a day and this has made my life so much easier. The 1/16 tip is perfect and the heat control eleminates all guesswork and the ease of ues of the iorn is just a joy! I like it so much, I'm ordering another. Everything is so convenient and easy to hand to use on this station that it saves a lot of wasted motion. The BEST!!!!!

Karen Hostetter

Best Deals on Weller WTCPT 60 Watts/120V Temperature Controlled Soldering Station

I've been in the electronics business for a long time and have had the same Weller WTC iron for at least 25 years. The current WTCPT station is basically the same thing as what I have; the technology has not changed at all. Mine has been dropped, rolled over by chairs, stepped on, and used for literally hundreds, if not thousands, of hours, under all types of conditions. It has never failed to perform.

I know that my iron is an older version, but I also use the current WTCPT model enough so that I think it's equivalent in quality and function to my old one.

I like the fact that it's simple; the power supply is really just a 24VAC 2A transformer, nothing fancy, and the temperature control is very simple (it relies on the fact that when you heat a magnet to a certain temperature, called the Curie point, it loses its magnetism, and when it cools below that point, it becomes a magnet again). So not much to go wrong.

One thing I really like is that the element can put out a lot of heat when needed. That means it heats up quickly (it's fully ready to go in 30 seconds or less) and, more importantly, it can deliver enough heat to cleanly solder large expanses of copper or joints with large wires. I've soldered some things with it that I thought for sure I'd need to drag out a soldering gun to tackle.

I have other irons, including a variable temperature-controlled one, two hot-air SMD stations, and a few soldering guns (Weller 8200s) but I use the WTC for all of my day-to-day work. I'd recommend it highly to anyone who needs a supremely reliable workhorse soldering iron.

Honest reviews on Weller WTCPT 60 Watts/120V Temperature Controlled Soldering Station

Well worth the price tag. The best iron for any electronics board work. No adjustments to worry about. Buy a low cost 700 degree tip and it keeps it at 700 degrees so that the solder tinning doesn't boil away every few seconds. Apply solder and more power is automatically fed into the heating element to maintain solder flow. Better than the TC (thermocouple types) because the tips cost one tenth of the price. You can have 3 or 4 tips for any purpose: 1/16 inch for fine work; 1/8 inch for normal work; etc. System is grounded to protect components from static charges.

Find helpful customer reviews and review ratings for Weller WTCPT 60 Watts/120V Temperature Controlled Soldering Station

Works Great! I am an student at Oregon State University in Electrical and Computer Engineering. This is the exact model that the university uses and I got one so that I can finish projects at home and not need to spend money on gas to drive 20 miles (one way) to school to work on things or need to have more than one set of tips for soldering irons (one for school and one for home). I figured if OSU liked them enough to only have Weller WTCPT soldering stations, they had to be good, and I have not been disappointed yet! I figure the savings I will have on gas will pay for my soldering station in less than 2 years!

Buy Fom Amazon Now

Thursday, January 2, 2014

Cheap Inferno Stove Top Meter (3-30) thermometer calibrated to measure

Inferno Stove Top Meter thermometer calibrated to measure temperatures on stove top. Rich black porcelain enamel. Stylish new design featuring gray, white, and orange recommended burn-temperature zones. Helps you conserve wood and avoid excess creosote.
Customer Ratings: 4.5 stars
List Price: $24.95
Sale Price: $18.95
Today's Bonus: 24% Off
Buy Now

I bought this thermometer for use with my Jotul wood stove to monitor stove temperatures. The stove literature says that the stove should be operated between 400 and 600 degrees (F) for best results and the break in instructions recommended 3 fires to temperatures of 200, 300 and 400 degrees, so I decided I'd better have a thermometer.

I initially bought an Inferno stove _pipe_ thermometer at a stove store because that was all they had. Once I read the instructions for that thermometer, they said it wasn't recommended for stove _top_ use, so I bought this thermometer online. The recommendation is apparently because of the temperature range markings, not because of any difference in the thermometers actual performance. Once I had the chance to compare the two, both of the thermometers read very similar temperatures, this one has the correct ideal range (400-600) labeled on it. The stove pipe thermometer would be fine if you use the temperature, not the colored zones marked on the thermometer. The two appear to be identical except for the painted range.

I'm a tool geek, so I also bought an infrared thermometer (Kintrex) to check my two stove thermometers. The IR thermometer works quickly and seems to be very accurate. It shows that when the stove is warming up, the Inferno thermometers lag by as much as 50-100 degrees. Once the stove temperature has stabilized, they agree with the IR measurement very well. Another thing the Kintrex thermometer shows is that each of the four corners of the stove can be a very different temperature as the stove is heating up. This variance can be 100 degrees or even more. Once the stove is up to temperature, the four corners will be within 10-20 degrees of each other.

As long as you remember there will be a lag while the stove is heating up and the fact that one corner's temperature alone isn't going to be an exact representation of the whole stove temperature, this should be a useful tool as you learn to use your stove.

Click Here For Most Helpful Customer Reviews >>

OK, so this is only a thermometer so I won't write a long review, but I have to say that this little device helps me operate my wood stove better. It helps me know when I have the stove "overfired" or when I need to add more wood and turn up the oxygen. We've named the zones "Papa Bear" (too hot), Mama Bear (too cold) and Baby Bear (just right). Yeah . . . I know, but I have young kids.

Best Deals on Inferno Stove Top Meter (3-30) thermometer calibrated to measure

I purchased two of these for our wood stoves at the cottage. They really help you burn at a safe level which in turn conserves wood and avoids excess creosote as they say. The only suggestion, and I don't know if it can be done, is to make the arrow a bright color so it is easier to see in dim lighting conditions. I would rather not turn on a light just to read the stove temperature. If the arrow were brighter, I would definetely give it 5 *****

Honest reviews on Inferno Stove Top Meter (3-30) thermometer calibrated to measure

This magnetic thermometer helps me control the wood stove temperature and minimize creosote in my chimney. Also helped with the break-in of my new Jotul wood stove. If you operate a wood stove I would highly recommend this unit. It is also made in the USA!

Find helpful customer reviews and review ratings for Inferno Stove Top Meter (3-30) thermometer calibrated to measure

We purchased this thermometer after trying two others (we have two wood stoves): 1. We purchased a "Rutland" at our local ACE hardware. This thermometer seemed accurate but is difficult to read without getting very close, because of the colors. 2. Then we purchased a "Meeco Red Devil" thermometer from Menards. This thermometer had an attractive white background that was very easy to read without getting very close when we bought it. However, after using this "Meeco" product for a few days, the attractive white background turned a light tan/brown that is difficult to read without getting very close. Also this "Red Devil" thermometer showed about 100 degrees hotter than the "Rutland" thermometer. 3. After getting the "Inferno" thermometer from Amazon.com we found that it registered the same as the "Rutland" thermometer but is much easier to read from an easy distance away. The Inferno has kept its original attractive colors. We recommend the "Inferno" as the best choice.

Buy Fom Amazon Now

Wednesday, December 18, 2013

Oster CKSTDFFM40 2-1/2-Liter Deep Fryer, White Review

Oster CKSTDFFM40 2-1/2-Liter Deep Fryer, White
Customer Ratings: 3 stars
Buy Now
I have had this appliance for about 2 months. It fries chicken golden brown and fries to die for.

It does take 15 to 20 minutes for the oil to heat up, because it is capiable of cooking over a lb. of food.

I am lovin my oster fryer. I hope you like yours as much as I like mine.

Click Here For Most Helpful Customer Reviews >>

I had a car like this (Chevy Vega GT) it was a great looker but, mechanically, it was a total failure. This Oster is the Vega of deep fryers. We brought it home and set about cooking fish and chips... It took 25 minutes to heat the oil and then when we fried the french fries the oil cooled down so much that they soaked it in. We needed to wait at least 10 minutes between batches for the oil to reheat. The battered fish came out as disappointing. I really liked the ergonomics but the designers short changed this unit on heating coils... rumor is that deep fryers should heat up the oil hot enough to fry something, duh. Not Recommended

Best Deals on Oster CKSTDFFM40 2-1/2-Liter Deep Fryer, White

got rid of my fryer after only a few uses because the grease would over-flow a minute or two after putting the food in. would have only used once but wanted to make sure i didnt do something wrong. tried putting in new oil, checked the level and still it was over flowing. extremely dangerous and made a mess!!

Honest reviews on Oster CKSTDFFM40 2-1/2-Liter Deep Fryer, White

I chose this rating because it wasn't what I expected. I had an older one that was similar, but this one doesn't have a timer, and the handle doesn't fold up while you are cooking.

Find helpful customer reviews and review ratings for Oster CKSTDFFM40 2-1/2-Liter Deep Fryer, White

A nicely function fryer for the price. Haven't had any problems with oil cooling. Haven't had a spilling problem.

I'm mainly reviewing to praise customer service.

We lost the cord. I sent an email to oster asking how to get the replacement as it was not available on their website.

They were unable to provide a replacement cord so they sent a replacement fryer. no questions asked

kudos

Buy Fom Amazon Now

Wednesday, December 4, 2013

Best Fireplace Remote Deals

Fireplace Remote
Customer Ratings: 4.5 stars
Buy Now
The receiver looks nothing like the picture shown in amazon's site. It has no light, it does require 110 VAC and has a short 4' cord. It has a 3 position switch you don't need to use after installation. The 3 positions are

OFF it does nothing

REMOTE the remote is active and works fine

ON it locks the fireplace on

NOTE: if you do NOT have 110 VAC inside your gas fireplace for accessories (blower, etc) then you should consider this unit SkyTech Millivolt On/Off Remote Control which has a battery operated RECEIVER inside the fireplace. Depending on use the batteries will last a year, if you want more use the energizer L91 lithium cells which can outdo alkaline 8 to 1 Energizer L91BP-8 Lithium AA Photo Battery (8-Pack) and you may be able to get 2-5 years. Those batteries have a shelf life of 10 years from purchase to begin with.

Back to this product for 110VAC equipped fireplaces (they both install similarly as explained below except the one linked to above has a fancier remote, needs batteries, has no AC cord, and it has a more complex remote with timer), besides the 110 VAC plug on this unit, there is 18 inches of antenna wire you just unroll and put behind the fireplace with the controller. There are also 2 ea red wires with "3-way" terminals crimped on the end, and are about 2' long. These go "underneath" your existing control switch if any at the milivolt gas valve or can be the only control. On my fireplace the trim has a small on/off switch that runs 2 wires down to the milivolt gas valve. I pulled off the connectors and put the red wires from the remote where the switch used to be, then on the 3rd terminal, I pushed the original switch connectors over them so that switch could still be used. When "ON" the red wires are shorted together just like the on/off switch does which completes the milivolt gas circuit and turns on the gas. When "OFF" the red wires are open circuit but the 3 way terminals allow the original milivolt thermostat or on/off switch to continue to function normally. I'll just mention that gas systems make their own power from the pilot light which is about 3/4 of a volt, hence the name milivolt. It is a fail-SAFE system since if the pilot goes out, the voltage is gone, and the gas valve can not be opened until a pilot is restored. Because the control voltage is so low, thermostats for furnaces with 24V controllers won't work and milivolt controls must make hard switch contacts so when shopping for gas controllers look for the words "milivolt compatible" and you're set.

IMPORTANT NOTE: Because my fireplace has a 110 VAC blower to circulate the air, the contractor installed a 110 VAC metal outlet box with 2 outlets, one was used for the blower, and one was unused which made this an exceptionally easy install. You will need 110 VAC from somewhere to operate this unit only the remote runs on batteries. In my master bedroom I have another gas fireplace without the blower due to the room size. It has no 110VAC so this could not be used on it. To help control it I bought a $30 2-AA cell powered setback thermostat from the hardware store that operates milivolt appliances and connected the "heat" circuit to the gas valve that is a battery powered solution, but not remote controlled. What worked great with it is that my bedroom starts warming up 2 hours before I must get up by the alarm clock and doesn't have a chill in the room when I get out of bed.

Now back to this product before installation, set it to "Remote" if you want it to work normally. It can be confusing if you set it to "on", because your fireplace will be stuck on! If you have access you can switch it "off" when on vacation to prevent accidental starting of your fireplace. You can also just shut off the gas which is the best way, then you can stuff the remote box out of sight.

The photo of the remote is more realistic to what I receieved in the box it has 2 buttons labeled on and off, and it operates from a single A23 12VDC battery Energizer A23 Battery, 12 Volt 2 Pack The A23 battery provides 12V by stacking a bunch of 1.5V button cells to make a battery so it's a small 12V and the nice part is for remote controls it transmits a long ways. On my house I can turn the fireplace on or off in any room of the house.

Finally this product operates in the 303 Mhz garage door opener band and has 65,000 possible combinations to prevent accidental operation of your neighbor's unit or vice versa. The last part included in the box is a special hangar to wall mount so you can hang up the remote. Amazon needs to correct their photo to match the product shipped, and clearly show the 4' long 110 VAC 2-prong plug so visual shoppers like me are not expecting an easy battery operated product. It was sheer luck that since I had a blower unit there was one extra outlet behind my fireplace trim. I bought this on amazon because the contractor quoted me $250 for a remote circuit and never followed up on it. It proved to be an easy DIY project that saved at least $200.

Click Here For Most Helpful Customer Reviews >>

The Fireplace Remote was very easy to install and activate. It took a little over 3 mintues. The installation instructions were easy to read and follow. Very happy with the quality of the unit and the distance that the receiver operates is more than advertised in the manual! Very nice unit!

Keep in mind that you need 120V for the receiving unit. Although I installed my own electric to the fireplace which kept the unit hidden, the receiver came with a long electrical plug and connection wires which would possibly allow the receiver to be plugged into an electrical outlet close to the fireplace.

Best Deals on Fireplace Remote

Pros: This unit works great and was simple to install. The remote transmitter utilizes a Radio Frequency signal, instead of Infra Red, so the receiving unit can be hidden behind the lower grill on the gas fireplace. It came with a battery for the remote transmitter.

Cons: The remote transmitter uses an oddball and probably expensive-to-replace battery.

Honest reviews on Fireplace Remote

I purchased the "so called" battery operated fireplace remote expecting to get just that. Unfortunately, when the package arrived, the battery remote looked nothing like the picture in the description and required being plugged in to a 120 volt outlet to work. Needless to say, I immediately arranged to return the item to Smart Home.

On the positive side, the purchase, shipping speed, and return process were all handled expeditiously.

Find helpful customer reviews and review ratings for Fireplace Remote

I replaced the battery operated remote that was 7 years old. I forgot to change out the batteries in the receiving unit in the fireplace and one of them leaked and ....

Easy to install as long as you have access to an outlet. Plugged the receiver in and it worked immediately with the remote from about 20 ft.

Buy Fom Amazon Now

Wednesday, November 27, 2013

Discount SPT WA-1140DE Dual-Hose 11,000-BTU Portable Air Conditioner

SPT WA-1140DE Dual-Hose 11,000-BTU Portable Air Conditioner with Remote Control
Customer Ratings: 3 stars
List Price: $673.00
Sale Price: $426.68
Today's Bonus: 37% Off
Buy Now

Its two years since I purchased this and happened upon this link today. I remember doing a great amount of research when I bought this unit. It is NOT like the one being reviewed with 2 stars.

One key point it has two hoses input and output (not one like many units out there). It's very good at evaporating the water it takes out of the room (the two hoses are supposedly responsible for this efficiency). I have yet to empty the tank. The unit comes with a window package that holds the tubes in place (its made of heavy duty plastic).

As to moving it around, no big problems it is a beast to move on the stairs, but ..... its an air conditioner, not a fan.

I normally use it to cool down a 20x20 room (9 foot ceilings). It does take longer than I'd like, but if it's a humid night, it gets the room in a "sleepable" condition in about 1 hour.

The reason for not giving it 5 stars is that the remote control gives you options that you can't get from the panel. If you lose the remote, you lose the functionality (there may be a secret set of buttons you push to get the function, I haven't figure them out yet). The manufacturer's site is lacking in docs.

Click Here For Most Helpful Customer Reviews >>

I bought this AC after reading the 2 star review and I am very glad I did. I live in the college dorms and this AC does an excellent job cooling my room and I have not experienced any of the concerns posted by the other reviewer. I've got a few other friends with Portable A/C units and none work as well as this one.

The wheels roll fine on the dorm room carpet, I've had this A/C for over a month and have yet to empty the water tank, and this A/C gets my room as cold as I could ever want it, and could get it even colder if I so desired.

I got this unit on sale for ~$230 and this has been a great investment.

Best Deals on SPT WA-1140DE Dual-Hose 11,000-BTU Portable Air Conditioner

My unit had great cooling abilities. It was able to easily cool my living and dining rooms, but it leaked water all over the floor. Initially, the leakage started about hour into operating and it really leaked after I turned it off. It seemed to release all water the tank may have held. It just drained onto my floor.

This unit is supposed to have a built in reservoir tank for holding water. The compressor is supposed to shut down when tank is full and a indicator light is supposed to come on to alert that tank needs drainage. I never had a problem with water leaking from the drain plug. The leakage had nothing to do with the water removal hose. It was leaking underneath.

It may have been damaged in transport or it may just be a faulty unit. I really don't know. The reservoir tank is built into the unit and cannot be seen. I had no desire to pull out a screw driver and take it apart. It is possible it was cracked, but it's also possible it's poorly made. Either way, a real disappointment. It was very effective in cooling. I wasn't inclined to try a replacement, instead I purchased a window unit. One other thing, the dual hoses are expandable, but if you expand in an effort to move unit away from window, the intake and exhaust hoses pop out. The don't lock into place well.

Honest reviews on SPT WA-1140DE Dual-Hose 11,000-BTU Portable Air Conditioner

Price is good, Delivery was good, After 2 weeks of use--the unit is running very good so-far.

The best part about the unit is---it's the only model/company that has an AC that will turn itself back on after a power-outage!!

Here in Los Angeles, we have many power outages every summer.

I looked high and low and the SPT is the only unit offering this feature.

Plus***the sales dept./salesman, Mr. Wyn at SPT is VERY helpful, extremely knowledgable and customer satisfaction oriented.

I give their customer service/sales an A++, and their AC unit an A+.

Enjoy

Find helpful customer reviews and review ratings for SPT WA-1140DE Dual-Hose 11,000-BTU Portable Air Conditioner

When I recived the unit it was covered in oil like substance. I could tell the box had been opened and re-shut. To me it seems like they where trying to sell an item that had been already returned. I am returning it for the same one. If this one doesn't work I am going to get a refund for sure. They also need to package the product better. It was a joke how they had this 100lb ac packed.

Buy Fom Amazon Now

Saturday, November 16, 2013

Reviews of Whirlpool 9759242 Thermostat

Whirlpool 9759242 Thermostat
Customer Ratings: 5 stars
List Price: $60.49
Sale Price: $33.41
Today's Bonus: 45% Off
Buy Now

I've bought this part after my KitchenAid Superba oven (KEBS177DBL7) lost heat after I used SELF cleaning option (for the first time!). This is infamous design flaw in KitchenAid ovens, however, KitchenAid does not admit (even though there are thousands of reports about this in Internet!). I contacted KitchenAid hoping they send me a new thermostat for free but no such luck: even though I am "a valuable customer" they don't care since my oven is out of warranty. It should be called a "recall" considering number of complains, but again KitchenAid doesn't care.

So, this part replaces the original KitchenAid part (p/n 4452223) perfectly, but I am not going to use SELF CLEANING ever again. And this is my last KitchenAid appliance, I'd never buy anything from them again.

Click Here For Most Helpful Customer Reviews >>

The first time we tried to use the self clean feature on our kitchenaid oven. Two and a half hours into the self clean, the oven showed a fault code and shut off. Upon googling the issue, many said the thermostat had blown. Sure enough, this fixed the problem. I did it myself, saved probably $150.00 and didn't spend any more time on the issue than I would have if I had to deal with someone coming in to fix it for me.

Best Deals on Whirlpool 9759242 Thermostat

If you have a Kitchenaid Superba oven, DO NOT EVER RUN THE SELF CLEAN FUNCTION. It shorts out a fuse that is super expensive. A repair visit will cost you over $100. I ordered this part, removed the oven (found the installation manual online) and easily replaced this burnt out fuse, or thermostat...

Honest reviews on Whirlpool 9759242 Thermostat

I ordered this part to repair my mother-n-law's oven after she ran the self cleaning cycle. It took about 15 min and I had it going again. A lot cheaper than having a repairman do it.

Find helpful customer reviews and review ratings for Whirlpool 9759242 Thermostat

Must be a design flaw...wall ovens frequently stop heating after one uses their self-clean cycle.

The culprit more often than not is a burnt-out thermal fuse on the back of the oven.

Save yourself a bundle...buy this part (or one similar to it for your oven) and install it yourself! It only takes a few minutes, and Presto! your oven works again.

Caution: make sure you order the correct fuse for your oven. Remove the old one before ordering, or look at your oven's specs, to make sure what part you need.

Buy Fom Amazon Now