Showing posts with label honeywell programable thermostat. Show all posts
Showing posts with label honeywell programable thermostat. Show all posts

Thursday, October 23, 2014

Cheap TPI Corporation 198TMC Fan Forced Portable Heater, Radiant

TPI Corporation 198TMC Fan Forced Portable Heater, Radiant, 1500/900/600W, 120V
Customer Ratings: 3 stars
List Price: $116.29
Sale Price: $81.05
Today's Bonus: 30% Off
Buy Now

I have owned 10-12 of these Markel heaters over the last 40 years. The earliest were blue, then brown then white. The blue and brown work for years and years with only an occasional dust cleaning. The white models are China made and are OK except for one fatal flaw: the wire connections to the elements burn out and thus no heat is produced. Markel was good enough to replace my two heaters, but they too burned out. So I bought some good high heat wire connectors and a crimping tool, and replace/recrimp them as needed. (the old connectors fall apart like carbon.) Otherwise the heaters seem fine for my home and summer cabin. I realize this type of repair isn't for everybody but it works for me. Mind you I bought my last two heaters about 5 years ago so hopefully Markel has improved their Chinese connectors.

I do like the heat settings for these including the no fan lower setting.

PS (march 2011) I purchased two more of these heaters in January 2011. One element has just quit in the same fashion as before. I must now get out my repair kit.

Click Here For Most Helpful Customer Reviews >>

After reading a couple of the favorable reviews I purchased this heater for my 80 year old mother. The heater broke within 45 days. I contacted TPI and they told me I had to go through the seller Antonline. Antonline told me they only had a 30 day return policy and after that it was not their responsibility. After numerous phone calls to TPI (the manufacturer) they said they were not going to honor the warranty because I had purchased it from an unauthorized retailer. They said that they had received a number of complaints from customers about the heater and unless the heaters came from one of their authorized dealers they we not going to replace them. I told them as a consumer I should not have to be responsible for verifying who is authorized to sell a company's products.

They responded that my complaint along with the others had been discussed at the highest levels in the company and that the decision to not honor the warranty was final. I filed a complaint with the Tennessee consumer affairs division. I not only found it deplorable that they would not even consider that they may have had a manufacturing flaw, but to also just neglect your own warranty was too much.

Not only will I not recommend this heater, but I would not recommend purchasing any product made by TPI.

Best Deals on TPI Corporation 198TMC Fan Forced Portable Heater, Radiant

We have purchased a large quantity of these fans for use at mountain-top communications sites that can get pretty chilly in the winter months. Over the years, these have proven to be very robust, dependable heaters. They are also great camping heaters in that, on the LOW setting, the fan does not kick on and off, or run at all. If you're a light sleeper, this allows you to sleep, while still getting plenty of radiant heat with a thermostat setting. The LOW setting is enough to keep a 24-foot trailer nice and warm inside while outside temperatures are in the 40's. The low setting is also nice since it is not drawing much current through your trailer's electrical wiring. These are sturdy heaters and I can't recommend them highly enough.

Honest reviews on TPI Corporation 198TMC Fan Forced Portable Heater, Radiant

I have two of these. They send out wonderful heat, much more then the ceramic type heaters that are so popular. I've used these for the past 4 years with no issues. They provide enough heat to warm my office and living room during extreme cold weather. They are built pretty heavy duty and very solid. I would recommend these heaters

Find helpful customer reviews and review ratings for TPI Corporation 198TMC Fan Forced Portable Heater, Radiant

I bought two of these heaters within a month of each other.

The first one works fine while heating a 12x12 room.

The second one broke down after three weeks of light usage. It was heating a small, 60-degree bathroom up to 72-degrees , which means it wasn't being overused or taxed in any way. At first it began emitting a strange odor a burning smell than it stopped heating, even though the unit was still running. Pushing the Reset Button does nothing. I suspect that the element burned out. A label on the outside of the unit warns that there are no user replaceable parts inside. The heater is worthless.

Despite the fact that the first heater is still working nicely, I cannot recommend the product.

Buy Fom Amazon Now

Sunday, September 21, 2014

Discount La Pavoni Stradavari Espresso Machines

La Pavoni PSW-16 Stradavari 16-Cup Espresso Machine, Chrome with Wood Handles
Customer Ratings: 3.5 stars
List Price: $1,499.00
Sale Price: $1,376.14
Today's Bonus: 8% Off
Buy Now

Update: At the three year mark, the heating elements on my machine failed. Repair costs TBD. If it's a write off, I estimate my service life equipment cost to have been right around a buck a shot. I had hoped for better longevity from a simple, expensively over-built machine. My initial rating was five stars, which I now reduce to three. Original review follows, with updates noted:

I have owned the 16-cup La Pavoni Stradivari model for about six months. I purchased it through Seattle Coffee Gear, a nearby dealer and repair shop I have come to trust. My wife and I use the machine at home for 4-6 Americanos or lattes per day.

My machine arrived in good order and was easy to set up. Per directions, I ran a tank of water with baking soda through initially, and set up the steamer with the venturi frothing attachment. There's a lot about this machine I like: its small footprint and steamship-era aesthetics, sturdiness and perpetual maintainability, silent operation, and the ability to pull an absolutely perfect shot. The venturi frother is a black plastic gizmo with a silicon tube to put into the milk to be frothed. Turning on the steam draws the milk into the frother and deposits the result directly into a cup. The result is hot and tasty, but with bubbles not quite fine or consistent enough for "coffee art", which doesn't really matter to me. Update: when the feeder tube from the Venturi frother became uncleanable I switched to the traditional wand and figured out how to use it. I like the finer foam it produces much better.

Here are some tips on use of the machine:

Raising the pump handle up opens the pump assembly to the water tank. Steam pressure then drives water into the pump. Depressing the lever pushes the water through the puck and into the cup.

If the pump and the filter are not hot before you compress the grounds into the filter assembly, the metal of the filter cup may expand when you operate the pump, allowing some water to go around the puck. Ways to mitigate this problem are: let the machine warm with filter assembly attached for 15-20 minutes; run 2-3 shots through an empty filter; or put hot water in a cup and soak the pump head until it warms up (doing the same for the filter assembly). In any event, this problem goes away after the first shot.

Experiment with your grind until you find one that allows expression of the shot with moderate pressure on the pump handle for between five and ten seconds. I use a Capresso conical burr grinder set on the coarsest of the "extra fine" settings. If you're foolish enough to blow a grand on an expresso maker, spend a little extra to buy a heavy stainless tamper of the appropriate size as well. It will make forming the puck much easier.

Per the instructions, when you raise the pump handle to let water into the pump, pause a few seconds or until coffee first drips from the filter assembly, then pull the shot. The pause moistens the puck and results in vast amounts of rich, deep caramel-colored crema. You can't replicate this step with an electric pump machine, and I believe it makes an important difference in the result. Update: Actually, Breville's new unit is supposed to do this for you.

Wait a short while after pulling a shot before removing the filter assembly, to allow pressure to dissipate. If you're impatient, you can blow grounds all over the counter. The harder the pull, the longer the required wait.

Be sure to rinse the frother right after using it to keep milk solids from clogging it. If it clogs, run a cup of 50%-diluted white vinegar through it, followed by a cup of water.

These steps are easy to master and the result is truly worthwhile.

Click Here For Most Helpful Customer Reviews >>

This machine was a great disappointment. I got this to replace a 70's Pavoni Europiccola that simply wore out. From the beginning the first cup of espresso is cold, unless you go though a ritual to get it hotter. The manufacturer said this was just the way it is now designed.

Then I noticed that after using it, there was a puddle of water underneath. La Pavoni sent me to Thomas Cara in San Francisco, and said he was their representative. HE curtly said he was NOT their representative. But he described a defect in the Stradivari design the heating element is made of stainless steel and the bottom fixture is brass so they cool at different rates and frequently leak like mine was doing. So there is no good fix for this $800 espresso maker.

Thankfully, Amazon has been very responsive in taking the unit back, and I expect a full refund. That part was easy.

La Pavoni ESW-8 Stradavari 8-Cup Espresso Machine, Chrome with Wood Handles

Best Deals on La Pavoni Stradavari Espresso Machines

This machine is exactly what I expected, pulls beautiful shots, but not without some patient troubleshooting. You MUST use an adjustable burr grinder and learn the art of grinding, tamping and pulling the shot. There are some good videos on youtube on this machine.

However, the plastic tray that catches any spilled espresso was either broken out of the box, or broke during its first cleaning. It is made of gossamer plastic, and cracked right away.

Also of concern, the base of the unit (Stradivarius) appears to be plastic covered with a chrome looking finish. It sure looks like metal in the pictures, and for a machine that costs as much as this one does, I would expect the base to be metal. Unfortunately, when you pull a shot, the plastic base flexes, and after only a few weeks, I have noticed some cracks on the base unit just to the right of the boiler. I think older machines have metal bases, and I would definitely try to get an older metal base machine if I could do it over.

And some oddities, the filter basket tightens to the left. The on light is red, while the heating light is green (seems they should be the other way around). My machine hovers around .75 bar, which seems low, but it still pulls beautiful crema.

Other than the plastic parts, this machine is great.

Honest reviews on La Pavoni Stradavari Espresso Machines

This machine is outstanding! That is, if you know how to manually pull shots. Apparently, some people want a fully automated espresso machine so do not get this if that is what your looking for. Once you get the hang of how it works, you will never want coffee from any store like charbucks or tully's...I lived in Italy for almost 2 years and this machine will produce better espresso than what I had over there, which was better than anything from a coffee shop in the US. If you get this machine get a conical burr grinder, and if you are serious about coffee, roast your own beans too. I have a Zassenhaus knee grinder, a Nesco professional coffee roaster, and I buy my green coffee beans from . Buying this machine with regular roasted beans from the store is not going to produce the best espresso and you should look at a cheaper machine if you are planning on doing so. Overall the machine looks beautiful on your counter and you will impress your friends with your at-home barista skills!

Find helpful customer reviews and review ratings for La Pavoni Stradavari Espresso Machines

On the first delivery, the machine arrived with damaged wooden handles that the protective finish was coming off. I sent it back to Amazon for a replacement.

Machine #2 arrives. The boiler knob have the same issue with the finish but this time also some of the polished chrome parts are showing the copper bellow. On the base the polished chrome is missing in a very small are aa and yet I would have rated it 4 stars if you have asked me yesterday. Today the safety valve just blown opened while the machine was warming up.

I forgot to mention, this is a 18 days old machine.

Despite making some of the very best shots you ever had, Do not buy!!!

Buy Fom Amazon Now

Monday, September 15, 2014

Tayama Electric Cooking Plate - TEP1 Reviews

Tayama Electric Cooking Plate - TEP1
Customer Ratings: 3 stars
List Price: $39.99
Sale Price: $30.10
Today's Bonus: 25% Off
Buy Now

This hot plate arrived with a warped base. It wouldn't sit flat on a counter, and rocked back and forth badly, a potentially hazardous condition. It appears to be of low quality construction, which may explain the warped base. Skip this one.

Click Here For Most Helpful Customer Reviews >>

Unlike most cooking plates, this little guy has the power of a standard cooktop! Very impressed, the price is right and it's extremely good quality.

Best Deals on Tayama Electric Cooking Plate - TEP1

"Just In Case" of "emergency" & suchit's there, it's simple & doesn't take "special cookware". It was set in the "back of the cupboard" for years & yearsbut....

Honest reviews on Tayama Electric Cooking Plate - TEP1

can i get your home pag to see and how to connect with your compamy.Thanks.

Buy Fom Amazon Now

Monday, May 12, 2014

Honeywell RLV3120A1005/H Digital Non-Programmable Thermostat Reviews

Honeywell RLV3120A1005/H Digital Non-Programmable Thermostat for Electric Baseboard Heating
Customer Ratings: 4 stars
Buy Now
Overal very happy with the purchase. Instalation was very easy. I did it in 15 minutes. Just please make sure you getting this for a heater thats rated at no more than 2000W at 240V or 1000W at 110V. If conecting to one heater it must be no more than 7 feet. If two no more than 9 feet of total lenght.

I got this one for my bedroom where i have one 6 foot heater of 1500W. I was going to buy more of them but luckly i found more info on maximum connected watts on other websites. Good thing i checked before buying more, or I be returning rest.

So this is not rated for big rooms. In my living room I have two heaters of total power of 3500W, so this thermostat would not be safe for that instalation. They have another model RLV430A that i will buy for above set up.

So check your heater watts usage. I am very suprised that the most important information is not written in product description.

I like the way this thermostat adjust power usage by not always passing through full power to heater. It has 5 vertical bars: 5 100% 4 80% 3 60% 2 40% and 1 20% 0 OFF. Very energy efficient.

Click Here For Most Helpful Customer Reviews >>

I bought three of these units for my house (planning on buying the 4th soon) and couldn't be happier. The rooms where I've installed these all do seem to maintain a consistent temperature better than they did with the old, odd mix of non-digital thermostats the house came with. Install was a snap and they are easy to use and read. Wish the price was cheaper like thermostats used with other heat types, but I guess it makes since considering the amount of voltage that has to pass through its parts.

Best Deals on Honeywell RLV3120A1005/H Digital Non-Programmable Thermostat

Just installed 5 of these in my rental units all are working perfectly with the baseboard heaters. Much better temperature control than the old thermostats so hope to show some utility bill savings.

Honest reviews on Honeywell RLV3120A1005/H Digital Non-Programmable Thermostat

We have baseboards w/ individual thermostats, and the original generic units had a noticeable click when turning on and off. Also, the baseboard would snap and crackle on cool down. These Honeywell RLV3120 thermostats have eliminated all that noise. I didn't read this in the description, but there is a "Heating Intensity Indicator" (squiggly lines) at the bottom of the display no lines = heating is off, and up to 5 lines = full power. So, it's not just full on or off. Room temp. remains very constant, another big improvement! Installation was very simple, and no batteries required. My only regret is not buying these years ago.

Find helpful customer reviews and review ratings for Honeywell RLV3120A1005/H Digital Non-Programmable Thermostat

This control proved to be as easy to install as advertised. It seems to control the heat in our bedroom very accurately plus I love the digital display. Great way to replace the little knobs with no temperature markings. The only caveat is that the wiring is small gauge/diameter and has strict limits as to how many watts/baseboard heaters it can control. I have one circuit with three long baseboard heaters that I will have to find a heavier duty control for.

Buy Fom Amazon Now

Tuesday, May 6, 2014

Cheap Optimus H-3011 Portable Utility Heater with Thermostat

Optimus H-3011 Portable Utility Heater with Thermostat
Customer Ratings: 3 stars
List Price: $29.99
Sale Price: $23.03
Today's Bonus: 23% Off
Buy Now

The outdoor temps have been in the low 40's this October 2009 and although there is good insulation in the actic the house gets chilly. I like warm and toasty. But, I live alone so heating the whole 1400 sq ft house to room temp doesn't make financial sense. This small, light weight and rather cute heater warms my 10 ft by 10 ft home art studio (formerly a bedroom) nicely to a comfy 72 degrees while the rest of the house stays around 67 degrees. The studio door is always open to the hall and even the hall stays around 70 degrees. I let it run on the low setting (700 watts) for 2 or 3 hours and then turn it off for 2 or 3 hours till things feel chilly again. BUT be careful that it does not tip over. I accidently kicked it over on its face the other night and realized that it does not have a tip-over safety shut off feature. My previous small heater did but it also consumed twice the electricity. So far, I'm OK with the missing safety feature since I turn it off when I leave the room but I would be uncomfortable leaving it with unattended children or pets.

Click Here For Most Helpful Customer Reviews >>

Bought this product for my daugter's room because the temperature drops at night. I had this heater for about a year now but last night the heater stop working. The light in the front was on but is no longer generating heat and the fan does not spin. It worked fine up until last night. I am giving this product 2 stars because when it worked it was great but it didn't last past a year. Hope this helps.

Buy Fom Amazon Now

Sunday, March 30, 2014

Best Honeywell C7189R1004 Wireless Indoor Sensor Deals

Honeywell C7189R1004 Wireless Indoor Sensor
Customer Ratings: 4.5 stars
List Price: $83.93
Sale Price: $48.48
Today's Bonus: 42% Off
Buy Now

I would have preferred that this operate differently.

This can only be used to average out settings.

It cannot be used to monitor the temperature in a room and drive the temperature in that room to the desired setting.

I would like the thermostats to be smarter than this and give me the option of what I want to do.

At least it should display the remote sensed temperature but it doesn't.

It displays an average.

If you want to monitor the temperature in a room and drive it to that setting, the Portable Comfort Control (REM5000R1001) must be used.

I have found the Portable Comfort Control to have issues so it is not ideal either. However, it does not force the use of an average temperature setting.

If you are expecting the temperature of another room to be indicated on the Honeywell thermostat, this will not do so.

Only the Portable Comfort Control will do this with a wireless thermostat.

Click Here For Most Helpful Customer Reviews >>

Helps to even-out the temperature variations in my house. Would recommend this product very highly. It's also not expensive or hard to install.

Best Deals on Honeywell C7189R1004 Wireless Indoor Sensor

I am using this additional sensor to even out the temperatures in my basement zone. It is working perfectly and can be used to average the temperatures or be the main sensor.

Was very easy to add on the system took under 30 seconds and I was up and running.

Honest reviews on Honeywell C7189R1004 Wireless Indoor Sensor

My only issue with this product was the instructions were not clear on how to connect to the Prestige 2.0 system as well as how to check on the thermostat to make sure the sensor was connected. I was able to figure it out though.

Find helpful customer reviews and review ratings for Honeywell C7189R1004 Wireless Indoor Sensor

Purchased one of these with my new ac system in fall 2013. The Goodman comfortnet thermostat allows up to six of sensors to be connected. I installed one upstairs to help keep the the whole house temperature more accurate along with humidity levels. My upstairs is always warmer, but now I had such great results with one I now have five plus the thermostat. All work together to help keep our house at a more accurate temp. I've found that by mounting them on an inside wall about four feet high they provide very accurate readings. If you want your house to reflect the true temperature set on your thermostat then this is a most have. I paid an average of $37 a sensor.

Buy Fom Amazon Now

Tuesday, March 11, 2014

Reviews of Dial Mfg. 7619 Digital Cooler Controller

Dial Mfg. 7619 Digital Cooler Controller
Customer Ratings: 4 stars
List Price: $41.99
Sale Price: $39.99
Today's Bonus: 5% Off
Buy Now

First thanks to BIC Warehouse for excellent customer service.

I have used this Controller for over five years. I was able to install the original when replacing an older evaporative cooler. This made the wiring and installation relatively simple. Although fitting it in a standard electric box took a great deal of effort.

Recently I had to replace the original Controller as five quick power surges in the span of a few minutes shorted it out.

Dial is still using the same design. It works very well and makes my evaporative cooler much more convenient to use. Having a thermostat to cycle the cooler on and off is well worth the effort.

However, I have given it four stars instead of five for two drawbacks. As another reviewer has noted, it has a delay before coming on. This is to allow the pads to get wet, but the delay is a ridiculously long four minutes. Maybe a commercial installation might need four minutes, but for residential it is way too long and it happens every time even if the pump is not turned on. Quite honestly the only time the delay to wet the pads is needed is if the unit has been off for a very long time and even then it does not need to be four minutes.

Second, it would be nice if you could leave the fan running and have the pump cycle on and off as the thermostat engages or disengages the evaporative cooler.

Those are design changes that Dial should make. I would gladly pay an additional $10 or so for these two conveniences. Guess I should write Dial a letter but hopefully they will read this. (Update: I did write to Dial and never heard back) The Controller itself is excellent and very useful for anyone with an evap cooler.

I've also used the plug in type similar to the Lux WIN100 Heating & Cooling Programmable Outlet Thermostat and can recommend them as well for a cheaper and easier installation.

Click Here For Most Helpful Customer Reviews >>

Having tried very similar units in the past with very disappointed results I was pleased to see this one works as advertised. I thought that since the company selling this thing is based in Phoenix they would not put an inferior product out there without having angry villagers storming their headquarters. But as another reviewer said, the 4 minute pad wetting cycle every time it turns on is ridiculous and it does generate a fair bit of it's own heat. I guess you need to pay quite a bit more to get a smarter one than only has a pad wetting cycle after the pump has not run for a certain time. As for the heat generated, if it makes any difference it just means the cooler will operate a bit more, here in the Sonoran Desert that's not a bad thing! And while it is said to fit in a 2x4 junction box, that's true, it will fit. But when you add the necessary wires and wire nuts behind it, good luck! I tried very hard to arrange the wiring so as to allow enough room for the controller but the best I could get was about a half inch protrusion from the box. The screws provided are long enough that it will mount that way and work. Sloppy looking but in a single box that's going to be an issue.

Best Deals on Dial Mfg. 7619 Digital Cooler Controller

I have a swamp cooler in my house. I couldn't deal with the silly simple switches anymore, so I replaced them with this. Every time I come into my house, I look at this thing (LOL), as it's very nice to now have a cool house when I get home from work. If you do have trouble getting this to work, check your wiring and see if there's a short. That's what my problem was: when the fan turned on, the (old) wires would short out the pump. Thank you Dial Mfg.

Honest reviews on Dial Mfg. 7619 Digital Cooler Controller

This thing is totally worth the money. I was a little skeptical, but after installing it and using it all summer I couldn't be happier.

Find helpful customer reviews and review ratings for Dial Mfg. 7619 Digital Cooler Controller

We like the controller but it could use a faster start up as others have said. In addition, we would like it a bit better if the unit had a back light so we wouldn't have to turn the hall lights on to view the settings.

Buy Fom Amazon Now