Showing posts with label how to work a honeywell thermostat. Show all posts
Showing posts with label how to work a honeywell thermostat. Show all posts

Sunday, January 4, 2015

Buy MaxiMatic EWM-9008K Elite Cuisine Waffle Maker with Non-Stick, White

MaxiMatic EWM-9008K Elite Cuisine Waffle Maker with Non-Stick, White
Customer Ratings: 3 stars
List Price: $19.99
Sale Price: $14.99
Today's Bonus: 25% Off
Buy Now

Based on the only 2 reviews available at the time, I was willing to take a chance due to the price. Unfortunately, the second reviewer was more closely accurate to my experience. We tried this waffle maker on 3 separate occasions and each time the waffles were cooked in the center but uncooked at the edges. Uneven cooking is the major complaint but expectations are that evenly cooked waffles is the prime job of a waffle maker. Bells and whistles mean nothing if the waffles are badly prepared. The best I can say is that after 3 uses they released fine...no sticking...but what they released was inedible at best. Turns out the heating element is very small and heat doesn't conduct through the thin aluminum casting. It heats only the area covered by the element. Needs a larger element or better conductors. I'm scrapping it for a much pricier model...Calphalon No-Peek Waffle Maker...also available on Amazon. We've only used it once but OMG...it's incredible. After a few more uses, I'll be willing to review it.

Click Here For Most Helpful Customer Reviews >>

The waffle maker is unforgiving when it comes to the amount batter you put in. Too much and it's making a mess, too little and there are gaping holes in the waffles.

Also, the machine has hot spots. Each side of the waffle maker has a spot where the waffles start to burn before the edges are fully cooked.

I've used this waffle maker four times now and tried two different waffle batter recipes. They were "okay" at best. Better than frozen waffles from the grocery store, but nowhere near the restaurant-quality I was hoping for.

Best Deals on MaxiMatic EWM-9008K Elite Cuisine Waffle Maker with Non-Stick, White

I generally don't purchase "one function only" appliances, as they inevitably end up in my appliance graveyard. However, it seemed like a fun holiday activity for the children and their cousins so I risked the ten bucks and bought it. Technically, it performed the basic task of making waffles, but the heating is very uneven so if we wished to avoid burnt middles, we ended up with the doughey corner that had to be discarded. If you add enough batter to prevent holes, it overflows onto the counter. In short, the kids had fun with the waffles, they put blueberries in the holes, so it was probably worth the effort. Unfortunately, the iron probably will not even merit a stop at the appliance grave yard.

Honest reviews on MaxiMatic EWM-9008K Elite Cuisine Waffle Maker with Non-Stick, White

My husband bought this for me for Christmas and if I hadn't threw away the box, I would have returned it. It does not brown the waffles evenly and I broke the little (plastic) latch the first time I used it. Terrible product!!

Find helpful customer reviews and review ratings for MaxiMatic EWM-9008K Elite Cuisine Waffle Maker with Non-Stick, White

This is a terrible product!!! Yes, the price is nice but if you use it often it will not last long. It does not cook evenly, can be very messy if you use just a little too much batter, and eventually will start smelling like chemical when you use it. That's what made me toss it in the garbage. The only bonus to this waffle iron was it made perfect size waffles for my toaster so I could make large batches and freeze them for a quick breakfast.

Buy Fom Amazon Now

Sunday, November 30, 2014

Discount CoolBot Walk-In Cooler Controller for window air conditioner

CoolBot Walk-In Cooler Controller for window air conditioner
Customer Ratings: 5 stars
List Price: $325.00
Sale Price: $315.00
Today's Bonus: 3% Off
Buy Now

Robert@ Three Boys Farms gives a good overview on the Coolbot. I use the coolbot in my coolroom to keep grapes around 39 degrees F. before I crush. What I have to offer in terms of a review is a demystification of the product for any potential user that would like to know exactly how it works. To begin, it doesn't 'turbo-charge' your air-conditioner. This is largely hyperbole. There is definitely no magic involved.

The Coolbot consists of three probes, a thermometer, a temperature probe, and a heater probe all leading back into a single well sealed package. Here is how it works. After removing the grill from the AC unit you will locate the thermostatic sensor which is affixed to the cooling fins of the AC unit. This temperature sensor is naturally responsible for cycling the AC unit on and off. You will now take the AC's temperature probe and place it in contact with (secure beside) the Coolbot heater probe. The second probe on the Coolbot is a temperature sensor which is placed in the fins of the AC unit approximately where you removed the AC temp. probe.

The heater probe on the Coolbot is in direct contact with the AC's thermostat. The Coolbot heater probe simply heats up the AC's thermostat thereby causing the AC unit to sense a warmer temperature than what actually exists in the cool room. The second probe of the coolbot monitors the temperature of the AC fins so that the Unit doesn't ice up. Ron has taken an extremely simple concept, one that isn't wholly original and created an excellent, dependable, durable and vastly overpriced product that will do exactly what it warrants. I am very pleased with its performance.

Click Here For Most Helpful Customer Reviews >>

Like Most intelligent farmers necessity and budget are always in play. The need for a commercially available refrigeration unit is part of all farms cool down and storage requirements, yet the availability of affordable

equipment to small farms does not exist, unless it is taken back to the purest form of design and function.

What Ron has done here is recognized that the limits imposed by residential A/C unit manufactures, specifically the

restriction of low temperatures by thermostatic control, can be manipulated. In designing the Cool-Bot he did several things;

1. energy conservation, large commercial units are power hogs,typically three phase 400-600 amps, and they are an antiquated, inefficient method of cooling, specifically taking copious volumes of cold air and moving it into a space that is usually poorly designed and has huge air leaks, the net result is waste, both in terms of energy, and product stored as air mass on leafy greens desiccates and wilts foliage, so unless your stored product is potatoes, you want coiling without excessive moisture robbing air mass. Cool-Bot delivers through your Energy Star unit, cold air without damaging the crop, and saves big money in energy costs, and efficiency.

2. Back up, when your space requires multiple units to achieve the desired level of cooling needed, you simply run more window units, again the often overlooked benefit here is the built in back up. If your commercial unit goes down, your product temps go up and spoil. The repair cost is high, and you still have one unit. With multiple Cool-Bots, you have an emergency back up in place, if a unit went down, the others can maintain temps for that period while you replaced that A/C unit, and since it has not been modified whatsoever, it is under a factory warranty. Now you have continued cooling during the repair or change out, something not offered by commercial refrigeration, with them your down, and your out.

3. Seasonal change. During cooler periods of the year with a multiple unit cooler you have the option of shutting down several of the A/C units for additional energy savings, with the big units, its on or off. So it is time to ask yourself, who brings the best things to life? not just those guys, but us farmers, we feed you, and increase your health with safe local foods, and design and build products that are frugal, and efficient. The highest praise a farmer or designer can receive is from his peers, and I highly recommend Cool-Bot to anyone, for a multitude of purposes. It is the only intelligent choice for efficient energy conscious cooling, and the only choice for 3 Boys Farm, a 365, 24/7 large grower of hydroponic and organic produce. Way to go Ron!

Best Deals on CoolBot Walk-In Cooler Controller for window air conditioner

I have had a Coolbot in place about a month now. I am extremely pleased with its performance...It keeps my 6'X 9' walk in cooler at an average temperature of 38 F. Great product and a great savings (about 1/6th the cost) over installing a 2 part commercial refridgeration unit

Thanks Ron...nice unit...keep up the good work.

RBK

Honest reviews on CoolBot Walk-In Cooler Controller for window air conditioner

CoolBot works great

Built an 8x8 building using a 1200 btu and CoolBot, Hung a beef for two weeks, Temps out side were from 20* to 60 *

The room stayed at 37*. for the whole 2 weeks.

Find helpful customer reviews and review ratings for CoolBot Walk-In Cooler Controller for window air conditioner

Install was a breeze, plenty of info on the website, and a quick phone call took care of the icing issues I was having. Make sure you read the material on their site before you start your project, there is a lot of useful information there and it could save you making the wrong purchase.

Buy Fom Amazon Now

Tuesday, November 25, 2014

Discount RiteTemp Heater Thermostat - Model 6004

RiteTemp Heater Thermostat - Model 6004
Customer Ratings: 5 stars
Buy Now
have purchased 2 of these units to date. the 2nd was to replace another brand that our heating contractor installed as a replacement. that one was lousy...different brand. i went back to rite temp and glad i did. on and off exactly as it is set for. will buy again if needed.

Click Here For Most Helpful Customer Reviews >>

Thursday, August 28, 2014

Cheap Waterbed Heater-Hardside

Waterbed Heater-Hardside
Customer Ratings: 4.5 stars
Buy Now
I have the Thermal Guardian Touch Temp Digital Waterbed Heater. The Product Details for this product don't tell you which model this is and there isn't a close-up for the heater control so you can see what the model is or how you will control the temperature. My heater works well, except for one thing. My house is old and has very little insulation, so it tends to be chilly in the winter. The Thermal Guardian heaters profess to keeping the temperature to within 1/8 of a degree of the set temperature. That's fine if your house isn't chilly, but when it is the heater warms to the set temperature and then turns off. The chilliness of the room cools the water enough for the heater to come back on and thus the heater continues to turn off and on several times per second indefinitely. The only way to stop it is to turn the heater off or change the desired temperature a couple degrees and once it reaches the new setting you have to change it again. I can't help but think, if you let it turn off and on all the time it will wear out and anyone who has a waterbed knows it's a pain to drain the bed and put in a new heater any more often than necessary. On days when the sun warms the house, this does not happen. I don't plan on changing heaters, just know this can be a problem.

Click Here For Most Helpful Customer Reviews >>

I ordered this heater with the fastest shipping option there was (2-6 days). The next day my shipping confirmation email estimated that the soonest heater would come would be in 7 days. If you have a waterbed then you understand the need to get a heater quick so you aren't sleeping on a frozen mattress. After 3 weeks my package never came. I wrote a poor review and the seller very quickly sent me an email insulting me and demanding I take down my review. I told him I wouldn't take it down because it was all true. He then tried to rectify the situation by refunding me for the product and shipping and repeatedly offering to send me the heater regardless. I told him I appreciated that and eagerly awaited a warm bed. Over the next few days I got many emails saying I should take down my review because the situation was fixed. Really, it wasn't because I'd been sleeping on a cold mattress for nearly a month. I did take the review down thinking that everything would be fixed. I never did get that heater, and I know it's silly to complain about not getting something you didn't pay for, so instead I'll complain that I would have gone somewhere else to buy one had a known it wasn't coming. This is easily the worst shopping experience I've had on Amazon. This heater is readily available from other sellers on this site, I would recommend them.

Best Deals on Waterbed Heater-Hardside

Our old heater quit on us in the coldest part of the winter. Those of you who are waterbed owners know that a cold waterbed in the winter months is not a good thing. We were glad to find a merchant on Amazon with the product we needed. It shipped within a week and we were able to quickly and easily replace the old heater unit with this one. Then we were back to comfortable nights once again.

Honest reviews on Waterbed Heater-Hardside

I originally bought this heater to replace an old style on and off heater which failed after about 15 years.

This heater was much better at regulating the temperature than the old one. It keeps the bed the same temperature.

That is, until it failed. I bought it less than 8 months ago, and it can no longer heat the bed over 80 degrees.

Having the heater for your waterbed fail is a huge inconvenience. I'd rather have a heater which causes the bed to have wider temperature swings, but is reliable vs a heater with tighter temp control which needs to be replaced more often.

Find helpful customer reviews and review ratings for Waterbed Heater-Hardside

price was right, item shown is what was received. Received within a week of when I ordered it, packed well, received in good condition. If it lasts as long as the the last one (10 years) I will be pleased.

Buy Fom Amazon Now

Thursday, July 10, 2014

Reviews of Kero World KW-24G 23,000-BTU Indoor Portable Convection Kerosene

Kero World KW-24G 23,000-BTU Indoor Portable Convection Kerosene Heater
Customer Ratings:
List Price: $159.95
Sale Price: $140.92
Today's Bonus: 12% Off
Buy Now

I have had one of these heaters for four years now, and use it in my 1000 square foot workshop (concrete floor and high ceilings make this space a challenge to heat). It does put out a considerable amount of heat, though it tends to be localized as there is no fan. Nearby the unit it gets quite toasty, and will raise the temperature of my shop 15 to 20 degrees after about an hour and a half.

The secret to good performance is to use nice clean kerosene, and be sure it is not contaminated with water. It performs best on clear kerosene, but this is the most expensive fuel. I have had decent luck using red dyed kerosene (road tax exempt). I by it at a local bulk petroleum jobber and as of yesterday (April 5, 2010) I paid about 16.50, with tax, for 5 gallons in California. It burns clean, but I find I need to clean the wick a couple of times each season. I get a bit longer than 12 hours per tank, which is great. Make sure you change the batteries at the start of winter, and any time the glow of the starter seems to dim. I go through one or two sets of C batteries each season.

Cleaning the wick takes about 10 minutes there are two screws and a knob to remove, and then the top slides off reveling the base. I use a small putty scraper to flick off the carbonized portion of the wick. If you find the unit sputtering or hard to light that is an indicator that this service is needed.

I have replaced the wick once over the past four years. Do this outside, and wear rubber gloves as the kerosene has a strong odor. It is not too hard, but you do need to take care that it is aligned correctly so that it cranks all the way up for lighting, and more importantly all the way down to ensure it extinguishes the flame. It did take me two tries to get this right, and I am reasonably handy, though a more careful reading of the instructions would have helped.

Overall I am very happy with the product and am considering purchasing a second one for my shop to reduce the ramp up time. The maintenance required keeps it from being a 5 star review, but the trade off is lower operating costs when compared to electricity or especially propane.

Click Here For Most Helpful Customer Reviews >>

Easy to operate and puts out a lot of heat. Wife and I both enjoy using it. The safety grill makes it safe for our preschool aged children.

We initially purchased this for back-up heat. However, our home has 11-foot ceilings and just one 1500 watt wall heater per room. So, we're using this heater regularly to get things initially warmed up in the morning. We run it on cold mornings for about an hour or two and it warms the whole downstairs.

Lighting this heater inside is fine, but some people may want to shut it off outside as there is a bit of smell on shutdown. If the batteries are low on the starter, you can also light it with a match.

Kerosene fuel is a bit expensive, but the heat value is quite high per gallon. You can cut the cost by buying in larger quantities -55 gallon drum drops the cost to about $5 a gallon...which puts heater operation cost at just under $1 an hour for fuel. 1.9 gallon tank burns 10-12 hours Otherwise, buying in 5 gallon containers from the hardware store puts the price at $9/gallon...but that's still enough to get through an electrical outage.

Stove oil (red dyed kerosene) is also fine (says this in the instructions that come with the heater), but will gum up the wick a little faster. However, stove oil is under $3.50 a gallon right now...so the price is right.

**Update:

Heater working great. I replaced the factory installed wick about a month ago, and the new wick is working even better. The first wick became clogged over time with the red dye from the 55 gallon drum of kerosene. However, it was cheaper overall even with the wick change to go for the drum. I add a couple teaspoons of denatured alcohol to each fill, and another teaspoon during the dry-burn -this helps a lot to keep the wick in good condition and to burn off any water that collects in the heater's sump. Denatured alcohol can be purchased locally in the painting section of your local hardware store.

I recently had the drum refilled with #1 stove oil from the local heating oil supplier -at $3.89/gallon. Stove oil #1 is the same as red dyed kerosene and works great (do not use #2 stove oil). The supplier has a minimum of 100 gal order, but I chatted with the manager and arranged for a fill that matched up with another delivery at no extra charge. Earlier in the season, I purchased a 5-gallon can of K-1 clear kerosene. I refill that can from the drum, then fill the heater with it. A good hand-pump to pull from the drum: Fill-Rite SD62 Hand Pump Rotary 2-Vane Curved Spout

The heater will burn 11 hours continuously, and heats the entire house all day. Granted, that's about $7.80 for a day of heating, which is more expensive than electric. However, our family loves the quality of heat it puts out.

Best Deals on Kero World KW-24G 23,000-BTU Indoor Portable Convection Kerosene

We live in a 3rd story condo, and are planning a New Years party. We just redesigned our patio built benches, made cushions, and I wanted the patio to be comfortable to sit on while outside. Our patio is open to the east, and also open in the nook to the north. So I needed something that was going to produce enough heat to keep the patio warm. We tried two other heaters (electric) before buying this one. They were horrible!

I bought mine at home depot, and they have the fuel there. I think I have a different model (DuraHeat Convection Kerosene Heater Model DH2304), but it is the same amount of BTU's and the the same design, just looks a little different. This heater is amazing...we filled up half the tank, and have used it the last few nights to test it out. It heats up the whole area and keeps the heat coming! I plan on putting a sheet up in the nook using an expandable rod, (don't worry the sheet won't hang near the heater) I just want to try to block some of the cold air from coming in! A lot of heat comes out of the top, so I am hoping it will keep more of the heat in the patio area!

If you are looking for a great patio heater, this is the one to buy! Especially if you live in a condo! I am pretty sure we are not allowed to have propane, plus who wants a 20lb propane tank hanging around! This heater is ok'd for indoor, and if we ever loose our heat, we won't be cold! As long as we have kerosene!

There are instructions for the care of this heater, and I suggest you read them. There is important information about dry burning and cleaning the wick etc. They stress the importance of these things to keep your heater working properly! I am new to this (Giant Lantern) but the instructions are very detailed and easy to understand! Good luck!

Honest reviews on Kero World KW-24G 23,000-BTU Indoor Portable Convection Kerosene

Kerosene use is always a slightly sloppy experience. This unit and the included pump minimize it. I used it to help heat my house after Super storm Sandy. It lasted around 9 to 10 hours with my flame height settings. It was a real lifesaver for us. Thank goodness we have a gas station nearby with bulk Kerosene. The bulk kerosene burned cleanly and odor free in this unit.

Find helpful customer reviews and review ratings for Kero World KW-24G 23,000-BTU Indoor Portable Convection Kerosene

This item really surprised me, it heated up the house, better than using propane where I live, as long as you make sure you get the right fuel, it tells you what to buy, the odorless K1. I was actualy warm this past winter when it snowed, and felt real heat:) Great heater. If your house is larger than 2000 sq ft, you might want to get one for each floor depending on how the heat rises and spreads out. Very happy with this purchase. Just be sure to use caution, and follow the directions as with most heaters. I put this on a brick area in the living room, it heated that room, and the heat rose up stairs just fine. My house is 1900 sq ft, so it was perfect.

Buy Fom Amazon Now

Sunday, June 1, 2014

Discount Cadco KR-S2 Portable Cast Iron 120-Volt Hot Plate

Cadco KR-S2 Portable Cast Iron 120-Volt Hot Plate
Customer Ratings: 3.5 stars
List Price: $200.00
Sale Price: $127.85
Today's Bonus: 36% Off
Buy Now

I wanted to dye wools in my shop rather than in my home and couldn't get an oven approved for the electric in the building so I went shopping. I read reviews and chose the Cadco, Portable Cast Iron Range, model KR-S2. When it arrived I was so excited. I brought my dyeing pots in and didn't have time to dye any wool. Instead, I made soup for a group and let it slow cook all day. There was a new start up smell but I never had any the rest of the day. It cooked consistently. I cooked soup several times before I finally could boil/dye some wools. It did marvelously. No start up smells, consistent temp's and the price was reasonable. I'll buy another one when I need it.

Click Here For Most Helpful Customer Reviews >>

At first I thought it wasn't working...it takes a long time to get the canner water hot. But, I have been using it for three years now and it works great every time! Still looks like new also. Sturdy and apparently well made

Best Deals on Cadco KR-S2 Portable Cast Iron 120-Volt Hot Plate

I love this hot plate so much more than the old coiled plate I owned. The heat is distributed evenly so no burnt areas. Great to have if you don't want to heat up your whole kitchen on hot days. I would buy this again. 5 stars*****

Honest reviews on Cadco KR-S2 Portable Cast Iron 120-Volt Hot Plate

The first time I plugged this in, there was a huge spark and it shorted out the outlet. I moved it to another outlet, and the hot plate started to heat up. After about two minutes, there was an arc from the unit itself and it is now dead. AND the second outlet is ruined. The manufacturer's package was taped on the outside -usually an indication of a remanufactured unit. Don't waste your money on this one. Even though I got an extended warranty, I'm not too keen on getting a replacement unit.

Find helpful customer reviews and review ratings for Cadco KR-S2 Portable Cast Iron 120-Volt Hot Plate

I bought one that looks "exactly" like this one (same stainless body, feet, burner and the knob), so its probably the same physical unit..

My use is to heat water in a teapot. At first I kind of liked it, but in retrospect I would have liked "any" burner of this basic type..

After about 2 years, there is still a chemical smell from the unit (which I dislike very much because I have freed myself from as much plastic and non stick pans as I could; now I am forced to breathe in this mysterious stuff every time I use it)..

Burner rusted in a couple spots.. I thought the coating was some kind of enamel; no such luck.. Yes I put a wet water pot on the burner frequently, but the regular cheapo burners never rusted on me..

Unit is quite large for so basic a function.. And the whole top gets pretty hot; I think a poor design. After the water boils (or oddly even gets close to boiling), and I turn off the knob, it then proceeds to a rolling boil for quite a long time..

Expensive, and I hate it (at least the one that looks exactly like this one) and am shopping for another one.. I cant imagine what this burner would be good for (perhaps slow cooking, because of the heat momentum of the burner, and outdoors so you dont have to breath the unknown chemical vapors)..

bobbler

Buy Fom Amazon Now

Monday, April 21, 2014

Discount Honeywell DP1030A5013 24 Vac 1 Pole Definite Contactor

Honeywell DP1030A5013 24 Vac 1 Pole Definite Contactor
Customer Ratings: 5 stars
Buy Now
Fast shipping and very reasonable price! This is generally the problem when one's a/c won't come on. Be sure to cut off the power prior to installing.

Click Here For Most Helpful Customer Reviews >>

I ordered this Honeywell DP1030A5013 contactor from another supplier who offered Paypal & charged less for the part & shipping from Traverse City Michigan. Photo on amazon is spot-on, elsewhere "photo is representative only." Make sure you need 1-pole with shunt, most a/c use 2-pole.

Very happy with part, exact replacement on my York H1DA036S06A a/c.

Best Deals on Honeywell DP1030A5013 24 Vac 1 Pole Definite Contactor

Exact as oem as you can get. Works great.Was easy to replace. Other sites had this item at a much more expensive price.

Buy Fom Amazon Now

Sunday, December 29, 2013

Dimplex DF2608 26-Inch Self-Trimming Electric Firebox Reviews

Dimplex DF2608 26-Inch Self-Trimming Electric Firebox
Customer Ratings: 5 stars
List Price: $729.00
Sale Price: $599.00
Today's Bonus: 18% Off
Buy Now

Replaced an old wood burning fireplace in a 12x15 living room with this. I'm not one for tacky or gaudy; this is neither. Unbelievably realistic, attractive, and great source of heat. Couldn't be used to heat the house, but def takes the chill out of the room. Would recommend to anyone!

Click Here For Most Helpful Customer Reviews >>

The imagery is real good and makes for a good fireplace insert. The problem comes from is when it's time to change the light bulbs. It requires some dis-assembly which should be no big deal but it is. After you dissemble the parts to get to the bulbs, it is still tight to get your hands in to unscrew the bottom bulbs. One was so tight

It blew up in my hands. leaving the screw part in the socket. Could not get it out. Tried to disassemble the box further to get at it better to no avail. Frustrated I bought a new one, to replace it. There was no guarantee, if I was able to get to it better that I would be able to get it out without breaking the plastic socket. I found it on sale on Amazon. So I bought the replacement. I have all the parts of the old one, I have another unused fireplace downstairs, when I get my basement ready I will reassemble it for looks...

Best Deals on Dimplex DF2608 26-Inch Self-Trimming Electric Firebox

Very satisfied with the product. It was exactly as stated in the description. This is the second Dimplex electric fireplace I have. It provides enough heat to warm my entire living space, so I can keep the thermostat turned down so the bedroom stay cool.

Honest reviews on Dimplex DF2608 26-Inch Self-Trimming Electric Firebox

Exactly what I needed and delivered faster than I expected. It was a replacement for another Dimplex model that is no loner made.

Find helpful customer reviews and review ratings for Dimplex DF2608 26-Inch Self-Trimming Electric Firebox

This is the perfect size and looks very real. I will enjoy it this winter when the nights are chilly.

Buy Fom Amazon Now

Monday, October 28, 2013

Buy Intermatic PF1103T 1.5/3HP Freeze Protection Timer and Thermostat

Intermatic PF1103T 1.5/3HP Freeze Protection Timer and Thermostat
Customer Ratings: 4.5 stars
List Price: $292.11
Sale Price: $156.15
Today's Bonus: 47% Off
Buy Now

I bought this model to replace an Intermatic 220 volt timer. I wanted to add the freeze protection. However, when my electrician began to install it, we discovered that the clock on this model only runs on 110 volt, therefore you need a "neutral line" to give the clock only 110 volt, but give the equipment 220 volt. Problem was, we didn't have a neutral line for this and had to send the unit back for model PF 1102T, which is all 220volt.

My electrician said that it was not uncommon for a 220volt outlet to be missing the neutral line, since there is no need to pull a neutral line to a 220 only outlet. I hope this helps someone avoid the mistake I made trying to save a little money by ordering PF 1103T and not PF 1102T. PF 1103T model claims it can run both 110 and 220, which is true, only if you are wired with an additional neutral line in your 220 volt outlet.

Click Here For Most Helpful Customer Reviews >>

Paid half of what they wanted in the pool store for this same model. Installed in 20 minutes and it works like a champ.

Best Deals on Intermatic PF1103T 1.5/3HP Freeze Protection Timer and Thermostat

We added this item to our pool pump control. It seemed to be binding upon first engaged power-up, so I bumped it a little and the pump started. It seems to be limbering up now after a week of operation. The wiring installation was simple. I am concerned now about the freeze protection but I will keep and eye on it, when the weather cools.

Honest reviews on Intermatic PF1103T 1.5/3HP Freeze Protection Timer and Thermostat

The unit looked good out of the box, however, once I had gone through all the effort to mount it and wire it, the clock didn't work. After removing the face, I noticed the clock was loose in the housing so I reset it and it worked for a little while. When the timer came around to the detents it hung up and wouldn't turn the pool on. Once again I had to take it apart and make an adjustment. This happened several times. At the moment it is working, but I would not recommend this product.

Find helpful customer reviews and review ratings for Intermatic PF1103T 1.5/3HP Freeze Protection Timer and Thermostat

My first unit like this has lasted for 19 years. I bought this one because my unit tried to quit. False alarm. Now I have a backup for half the price at the pool companies in Memphis.

Buy Fom Amazon Now