Showing posts with label siemens thermostat. Show all posts
Showing posts with label siemens thermostat. Show all posts

Thursday, January 8, 2015

Mr. Heater Big Maxx 45,000 BTU Natural Gas Garage Unit Heater Review

Mr. Heater Big Maxx 45,000 BTU Natural Gas Garage Unit Heater #MHU45NG
Customer Ratings: 4 stars
List Price: $774.86
Sale Price: $519.46
Today's Bonus: 33% Off
Buy Now

I have had the 45,ooo btu Big Maxx heater now for about 4 years. Every winter is a new set of repairs and continued repairs to keep it working. I leave my step ladder set up next to it because I am constantly working on it to keep it heating. I have ordered my 4th circut board to be put in this time. There is a bad connection in it now so I have touch the circut board everytime I want it to start heating. The others were shorted out because there is no fuse on the circut board. I would recommend spending a little more money and getting a better, lower maintenance heater.

Click Here For Most Helpful Customer Reviews >>

We used an unvented natural gas heater in our garage for several years. With many more cold days this past winter, we began having concerns with the excess amount of moisture and condensation produced by non-venting. Having already roughed-in the electrical and thermostat wiring for a unit heater when the garage was built, we decided it was time to switch to a vented heater.

We looked at the Modine and Big Maxx heaters and selected the Big Maxx 45 when it went on sale for $399 at Northern Tool. We ordered the heater and had it shipped to a store in our area to avoid shipping charges. The heater arrived much quicker that we anticipated. Our original plan was to install the heater sometime during the summer and be ready for next winter. The next weekend was nice weather so we decided to go ahead and install the Big Maxx.

Since the heater needed to mount at a 45 degree angle to the room, we mounted unistrut channel to the ceiling joists and mounted the heater thereto. We used category I gas vent from Lowe's. Installation was simple and straight forward. Then we turned the heater on.

The induced draft motor made a LOT of noise and vibration. Then the blower fan came on and you needed hearing protection to stay in the room. In the bedroom above the garage, it actually sounded like someone was running a couple of hammer drills. Being an engineer, I inspected both blowers to see why they vibrated so badly. The induced draft blower had a nice looking squirrel cage blower but the shaft hole was drilled off center. The next day we took the heater down, boxed it up and returned it to Northern as defective.

Next we ordered a Modine heater. Installation was a little more complicated because we already had the hole in the wall for the vent. We mounted this heater slightly differently to take advantage of the existing hole. This heater required Category III venting for our installation so we ordered Z-Vent online. The Modine heater is quiet as a mouse. As they say, "you get what you pay for".

Best Deals on Mr. Heater Big Maxx 45,000 BTU Natural Gas Garage Unit Heater

I bought this unit in Nov 2007. I have had trouble with it from day one. The company has been good to work with ( they sent replacement parts) but it just stopped working again. Parts come but takes 2 weeks or so. They don't rush it. 3 times now in 4 months. It is garbage and should be recalled and taken off the market. Spend more or get a different brand but stay away from this. I put one star only because that was as low as it would go.

Honest reviews on Mr. Heater Big Maxx 45,000 BTU Natural Gas Garage Unit Heater

I got this heater for my garage office. It works as described and no problems thus far. Installation was easy and remember to bleed the lines first before attemting gas hookup.

Find helpful customer reviews and review ratings for Mr. Heater Big Maxx 45,000 BTU Natural Gas Garage Unit Heater

I've had the Big Maxx 45,000 btu heater for about one full year now and am overall quite satisfied with the unit. It's installed in a converted to theater room, detached 24x24 foot garage with a 10 foot ceiling that is well insulated. I keep the thermostat set at 50 degrees and warm it to 72 degrees when we watch movies and that takes about 20 to 30 minutes when outside temps are around 20 degrees. The heater has worked flawlessly except for a cracked circulation fan which customer service was extremely helpful in replacing. My only complaint is that this unit is too loud (65 to 70db) for a theater room type application. We get around this issue by first warming up the room then running a very quiet electric heater that keeps the temp constant. For a garage or workshop application, this heater is perfect and fairly easy to install if you're handy with tools. Recommended!

Update; I finally determined that my inducer (exhaust) fan has been the noise maker. I called customer service and they sent me a new fan and associated gaskets. Installed the item and now this heater is much, much quieter. Kudos to a great customer service dept.

Buy Fom Amazon Now

Thursday, December 4, 2014

Best Bunn-O-Matic NHB 10-Cup Professional Home Coffee Brewer, Stainless Deals

Bunn-O-Matic NHB 10-Cup Professional Home Coffee Brewer, Stainless Steel, Black
Customer Ratings: 3 stars
List Price: $129.99
Sale Price: $99.99
Today's Bonus: 23% Off
Buy Now

This is the fastest coffee maker I have ever experienced!!!! When you first set it up, be sure to follow the instructions, because it's a little weird that you fill it with two decanters of water to get started. However it really does make 10 cups of coffee in what seems like seconds! Great for home or office. You will not be disappointed!

Click Here For Most Helpful Customer Reviews >>

Water runs through to fast, coffee taste like hot colored water. We have tried up to 15 heaping scopes for a 10 cup pot and still no real coffee taste, plus wasting a lot of coffee. Not at all what I expected from a Bunn.

Best Deals on Bunn-O-Matic NHB 10-Cup Professional Home Coffee Brewer, Stainless

I have wanted a Bunn for as far back as I can remember. I finally got this one and am so disappointed. Unfortunately for me I knew it was going to be awesome and I threw the box out so I can't return it. It'll work for guests I suppose.

Buy Fom Amazon Now

Wednesday, November 12, 2014

Patton PUH680-U Milk-House 1000/1500 Watt Utility Heater Review

Patton PUH680-U Milk-House 1000/1500 Watt Utility Heater
Customer Ratings: 4 stars
List Price: $32.99
Sale Price: $31.49
Today's Bonus: 5% Off
Buy Now

This heater ( or very similar from Patton) seems to have been around for a very long time. My father who is 96 actually did use this heater in the milk-house. Besides the nostalgia factor this heater does a good job for what it is designed to do, which is to put out safe heat. Not the prettiest, or quietest, probably not for your living room, but great for a smaller space, basement or garage. Here in Minneapolis where it is -2 degrees outside as I am writing this review, this little heater will take the edge off.

Click Here For Most Helpful Customer Reviews >>

This is my 4th milkhouse heater in 12 years. I use my heater daily almost 9 months out of the year. I love them for heating up a small room quickly and safely. The only complaint on this new version is that there is no OFF button. It is always on with the button lit up. Unplugging and plugging it in is a pain. But it saves on the energy bill and so I do it.

Best Deals on Patton PUH680-U Milk-House 1000/1500 Watt Utility Heater

I've had this heater for two years now. It warms up the room well as you would expect, but is quite noisy when it is on.

However, the biggest problem I have with it is its poorly built construction. The heating and fan mechanism is riveted onto the frame instead of screwed on. That may be good and well, but if it gets knocked over a few times, the rivets become loose. There's no way to fix them! Thus, the heating mechanism is dangling inside the case with no easy solution other than returning it for replacement in warranty. If it had been screwed in, it would simply be a matter of tightening or replacing the screws.

This is especially disappointing because this is supposed to be a utility fan. One expects that a utility fan could be a little more durable than other types of fans. But when the rivets break after its knocked over, it becomes dangerous.

Honest reviews on Patton PUH680-U Milk-House 1000/1500 Watt Utility Heater

What prompted me to write this review was my purchase of a duraflame electric heater of similar wattage to the old milkhouse holmes branded unit a friend gave to me. Even though the two units claim similar heat output. The milkhouse heater really kicks out the heat compared with the duraflame $75 model. The duraflame is much more aesthetically appealing but cannot match the raw heat output of this unit. This unit will put out the most heat for your dollar cost. I have also purchased the plastic holmes units similar to this model and they are still not the same heat output. Just wanted to clarify for amazon customers that if you want heat buy this unit if you want fancy or pretty buy others.

Find helpful customer reviews and review ratings for Patton PUH680-U Milk-House 1000/1500 Watt Utility Heater

This is the best small electric heater I have found--and I have used a lot of electric floor heaters. It is easy to use-uncomplicated. It turns off if you tip it over so it is safe. It doesn't overheat and turn itself off like many others. It seems to have a feature that causes it just to not overheat. I have left it on all night with no problems.

Buy Fom Amazon Now

Sunday, August 24, 2014

Coleman Cable 55303BL07 18/3 Solid CL2 50-Feet Thermostat Cable Reviews

Coleman Cable 55303BL07 18/3 Solid CL2 50-Feet  Thermostat Cable, Brown
Customer Ratings: 5 stars
List Price: $20.99
Sale Price: $17.75
Today's Bonus: 15% Off
Buy Now

I needed low voltage wire for LED under cabinet lighting and this fit the bill. The brown color is almost invisible against the wood cabinets. It is stiff enough to stay in place yet flexible enough to work with. Because it is copper wire, I was able to solder the connections easily so that the wires will not come loose even if accidentally bumped.

Click Here For Most Helpful Customer Reviews >>

Saturday, August 9, 2014

Cheap Sunbeam SLP3310-UM Low-Profile 1000/1500-Watt Convection Heater

Sunbeam SLP3310-UM Low-Profile 1000/1500-Watt Convection Heater
Customer Ratings: 3.5 stars
Buy Now
I purchased two of these units both failed after a few weeks. Problem was identical the units would work fine, but when shut off, would not power on again. The indicator light might blink, but then nothing.

I have found the problem is the cheap, polished 2 prong power plugs on these heaters. After a few uses they do not conduct enough current for the electronic control to be able to apply full power to the element.

The fix? Simple. Use an emory board to "roughen up" the plug power prongs so that a decent contact is made when the plug is inserted in the outlet. Then, buy a decent three conductor, grounded power cord and replace the AC cord entirely. At least, cut off the cheap power plug and replace it with a good plug with conductors that can carry the current needed.

If you can't do this competently, take the units to someone qualified to perform the repairs. Obviously, poor electrical connections can cause fires and would, if these units didn't have the "smarts" to see the faulty power and shut off the unit entirely.

Sunbeam Low profile heater digital

Click Here For Most Helpful Customer Reviews >>

We bought this heater for our living room to try to avoid using our central gas heating very much this winter. Our living room is fairly large, and this heater is doing a pretty good job so far. We closed doors so that it's heating just our living room and kitchen, and it has stayed very comfortable for the most part. There have been a few nights though where it was a little colder (in the 20s and 30s we live in Georgia!) and it did seem a little chilly in the room, but not COLD. We haven't noticed any significant change in our electric bill either, and we run this heater almost 24/7. Overall, it's a decent heater for keeping our living area comfortable, but if you live in an area that gets very cold, this may or may not work well for you (depending on the area you want to heat and the insulation of your home).

***UPDATED*** 12/15/09

It was nice while it lasted. We woke up this morning and the heater was off. We tried everything, and nothing would get it to turn back on no buttons worked, unplugging it and then plugging it back in didn't work, nothing. It worked well for the month that we had it, and now it just suddenly died.

Best Deals on Sunbeam SLP3310-UM Low-Profile 1000/1500-Watt Convection Heater

I purchased two of these last year ('08). I had to take one back to the store because it failed, but the replacement worked perfectly. I click the auto temp to 65 degrees and my rooms are warm (I also have 12' ceilings). I used these in place of the baseboard oil heat (when oil was $4 a gallon) and my heating bill was about $350 a month through the cold northeast Pa. winter. Oil would've been about $1000 a month.

I am buying 2 more to replace other models I tried that just don't work as well as these.

Honest reviews on Sunbeam SLP3310-UM Low-Profile 1000/1500-Watt Convection Heater

This unit has changed the way I heat my home in the winter.

I live in Minnesota in a commercial loft with 12' ceilings, 10' windows and hardwood floors. Heating this place evenly can be a challenge! However, I was pleasantly surprised to find that a few of these heaters were up to the task; they've made all the difference for me. I had been relying on my natural gas forced-air furnace, but the ceiling registers were too high in the air to heat the place evenly. Placing a few of these along the walls areas gave me nice, even heat throughout the apartment and sharply reduced my furnace's workload.

Even with all the cubic space created by 12' ceilings, a single heater can handle an impressively large area: each unit heats about 250-350 sq ft in my home and it doesn't seem to have a hard time keeping up. The programmable thermostat allows you to toggle-select temperatures from 65-85 (in 5-degree steps), the automatic shut-off timer has settings for 4, 8 and 12 hours. The energy saving feature cycles the wattage to save electricity consumption over a long period of time. This does reduce the heat produced (despite the claim that there is no noticeable difference) but the reduction is slight enough that I consider it a pretty good trade-off.

Outside it's variable "energy saving" mode, the unit uses a continuous 1500 watts and about 12 amps. The unit doesn't seem to be fragile and looks/feels well made. Dependability hasn't been an issue for me at all, and I now have three of these that I've pretty much been running continuously. These units are also pretty light and easy to move: there's even a small hand grip on each end to make it easy to grab. The claim that this is a silent heater is absolutely true you won't hear it at all except for some soft metallic expansion "pops" from the metal grate as it initially heats up. The size is pretty manageable also. It's about as wide and tall as the boiler drawer beneath a standard oven and is about as thick as a box of Kleenex.

All in all, I've been really pleased with these heaters. For a pretty small investment, they've made my home much more comfortable this winter and haven't been intrusive while doing so.

Find helpful customer reviews and review ratings for Sunbeam SLP3310-UM Low-Profile 1000/1500-Watt Convection Heater

I bought this item from another vendor in person and paid a little less than Amazon's list price. So far so good though with this heater. It was easy to get startedjust remove the packaging materials and plug it in. At first, like your furnaces, the unit smells as it heats up. It puts out a fair amount of heat too. I am using mine in combination with a second space heater to avoid turning on the gas furnace as long as possible. I have a small home so it's nice and warm. I would recommend this to people who have a small space to heat. I'll be testing it in the basement soon. That is also the reason for only 4 stars. I really haven't had it long enough to put it through all of it paces yet. Once I do, and I expect it to pass with flying colors, I see myself getting one more possibly.

If anything changes I will post an update.

Buy Fom Amazon Now

Saturday, June 28, 2014

Reviews of Pipe Heating Cable - 31060 60Ft. Ul Pipe Heat Cable

Pipe Heating Cable - 31060 60Ft. Ul Pipe Heat Cable
Customer Ratings: 5 stars
Buy Now
Purchased to use with the water hose on our fifth wheel trailer when we had to spend a period of time in freezing weather, this heat tape not only kept our water supply flowing, it produced enough heat to slightly warm the water. Normally we would have purchased a shorter length for campground use but we were parked a distance from a water supply making a longer heat tape necessary. It worked very well when used with foam insulation tubing and we would consider buying a shorter length for use when staying at campgrounds during short spells of cold snaps.

Click Here For Most Helpful Customer Reviews >>

Saturday, June 21, 2014

Buy Honeywell RTH6580WF Wi-Fi 7 Day Programmable Thermostat, White

Honeywell RTH6580WF Wi-Fi 7 Day Programmable Thermostat, White
Customer Ratings: 4.5 stars
List Price: $167.57
Sale Price: $119.99
Today's Bonus: 28% Off
Buy Now

This thermstat is outstanding. You can monitor and control the temperature, heat vs cool, and the fan auto vs on from your cell phone from anywhere. Right now there is no monthly charge for this capability.

You must have two-wire 24vac power available at the thermostat location to power the thermostat (R or Rc and a C wire). Most existing thermostats act as a simple switch and only have one hot wire (R or Rc)available. If you don't have the other hot wire "C" available, you will have to run one. The instructions don't tell you the thermostat receives its power through the Rc and C connections--my heating and A/C systems are separate systems, so I had to modify the wiring to get everything to work--it would have been very helpful to know Rc is used for power and not R.

Once I figured out how to make it work for my system, it worked great for three days. Twelve hours after I left on vacation, the thermostat wifi failed. When I got back from vacation, I determined that my home network was working fine and the thermostat wifi was the problem. Honeywell phone support was very good--I did not have to wait to talk to someone and the guy had me reset and try to reconnect it to the network. He quickly determined that I needed to take it back to Lowe's and get a replacement. I had no problem exchanging it at Lowe's and the replacement thermostat has been working great for two weeks now.

The wifi connection goes through a third party website and there is no charge for the service; however, the user agreement states that they can charge for the service in the future. If they start charging, knock off a couple stars.

Click Here For Most Helpful Customer Reviews >>

I purchased a RTH6580WF from Homedepot in Feb. The first problem I had was the wifi disconnecting within a couple of hours. This repeated and the router had to be re-booted to re-establish connection each time. Honeywell tech support was of little help, first telling me I had a weak signal and needed a wireless booster. I have been using wireless devices within 2 feet of that exact spot (and further from the router) for years without any problems. My laptops, iphone, ipad, & smart tv wireless all work fine. Honeywell tech support then said my Linksys wireless router was too old and needed to be replaced with a new router. Because I wanted the thermostat to work, I did replace my Linksys WRT54gs with a new Netgear router and the disconnect problems did go away.

Next problem was the temperature control. After sensing an obvious temperature fluctuation with each furnace cycle, I started checking with a fluke meter/thermocouple module with type K thermocouple, and also verifying with the 20 year old White-Rodgers programmable thermostat I was replacing. The Fluke and the old thermostat always matched within 1 degree. According to those devices, the RTH6580WF always displayed 3 to 5 degrees high. Further, during each furnace cycle, the RTH6580WF would remain steady or possibly show a 1 degree change while the other two always showed a 3 degree change. I had the sensitivity set to the most sensitive for a newer energy efficient house with 90+% efficient furnace which I have. I contacted Honeywell support and was told there was no adjustment or calibration for this. I re-installed my 20 year old White-Rodgers and verified that the actual temperature fluctuation during each furnace cycle was less than 1 degree. At this point, I returned the thermostat and exchanged it for another. The second thermostat was possibly 1 degree better than the first, but still was off by 2 to 4 degrees. I do not consider a 4 to 5 degree temperature error acceptable and I returned the second.

I missed the fine print about possibly being charged for the wireless access in the future. Had I been aware of that, I would have declined the terms and returned the thermostat for that reason alone. Something about not knowing the actual cost of a product when you purchase it does not sit well with me.

My final complaint was that the screen lighting and contrast is rather dim making it more difficult to read compared to the screens on other manufacturers thermostats that are available today (ie White-Rodgers blue screen thermostats). I would have also expected that as long as the RTH6580WF required the common for get the 24vac power that they would have provided an option to have the backlit screen stay on so that you do not have to touch it to turn the light on.

I really like the idea of a wireless thermostat, but it has to control temperature better than the two I tried. I also do not wish to let myself get trapped into having to pay some unknown future cost to use someone's proprietary interface system.

Best Deals on Honeywell RTH6580WF Wi-Fi 7 Day Programmable Thermostat, White

I am NOT even close to the home improvement type. So if things go south I'm in trouble. I looked over the Honeywell box and Honeywell wisely stated your HVAC wiring to the thermostat MUST have a "C wire" or the new thermostat would not receive power and would not function. So being the cautious person I am I asked three wandering separate Home Depot guys "If there was anyway I could "tell" if I had a C wire. The first guy said, "oh if you have AC you have to have a C wire." I continued reading the box and another walked by and asked if I needed help. I asked him the same question. He said, "If your home is new you definitely have one". I then asked #3 and he said, "you should". And then gave me the "you could always return it".

So I took the shot and bought it. I followed the directions carefully. I saw plenty of wires going to the existing thermostat so I assumed I was safe as I saw more than 4. I disconnected the old thermostat and began to affix Honeywell's supplied wire stickers -with a lot of different letters in the alphabet that matched all the letters on the existing and figured I was safe and this would be a simple "swap out". Well guess what? My new, state of the art home had everything but a C wire. Nervousness sets in. I rip through the quick setup guide and read about "alternative wiring options for those without C wires. It was a very nicely done YouTube video that tells me I will have to use the "G" wire in place of the missing "C" wire. And by doing that I would lose the ability to only run the fan manually. No biggie. Then the video sends me down to the furnace to do the same G to C move on the main panel and then jump the "Y" to "C" with an 18 gauge wire. Yeah I have tons of those laying around my house. Now panic begins to set in. Putting the old thermostat back or worse having no heat in Northern Utah over night in end of Winter or worse, having to call an H VAC guy on a Sunday for "after hours" home service that "costs the same" while I listened to a lecture about not being trained to do this and getting a $300.00 bill did not appeal to me. To finish this long story my neighbor is an electrician. He speaks mostly Spanish but after reading the Spanish enclosed instructions and watching the YouTube video like 4 time he got it to work.

Otherwise an excellent WiFi thermostat system -which I can do and fully understand. It will help a good deal while I am traveling. I am an empty nester. So word from the now wiser, if you aren't comfortable with this stuff leave it to those that are.

Honest reviews on Honeywell RTH6580WF Wi-Fi 7 Day Programmable Thermostat, White

I picked up this thermostat at Lowes. I had expected to pay $150 for Honeywell's touchscreen wifi thermostat or as much as $180 for last year's nest. I was pleasantly surprised to see a wifi thermostat option for around $120.

I got the thing home, took down my old thermostat (which had 4 wires R, G, Y and W) and installed this one. I turned my furnace back on and... nothing. It turns out I didn't have a "c" wire. There were 6 wires coming from the furnace but only 4 of them were used. I removed the cover from my furnace and took a look. Sure enough there was a "C" spot with nothing hooked up to it so I stripped the (unused) blue wire going to my thermostat and connected it to "C", then went back upstairs and hooked up blue to "C". I turned on the furnace and the thermostat woke up. I thought I was done. I was wrong.

I now had to connect to an adhoc network called "new_thermostat_somethingorother" and the only way to force my iPhone to believe it was the real internet was to go into airplane mode before choosing it. I got to the wifi setup page, picked my home wifi ssid and entered my password. I thought I was done. I was wrong.

I went to honeywell's web site, created an account, entered my thermostat's mac address and checksum. I then got a very nice user interface for entering on times and off times. I was impressed. I thought I was done. I was wrong. The thermostat had to download a software update. I grow sick of buying stuff new and the first thing it has to do when it gets on the internet is send me away for up to half an hour while it updates its firmware. When the firmware update was over I thought I was done. I was wrong.

It turns out that in my haste to get this thing on the 'net, I skipped setting the date and apparently it doesn't figure out what day it is over the INTERNET?!? When I turned on the heat, based on the time of day it went to 62 degrees. But it's Saturday, not Monday right? So I called Honeywell tech support and they had me hold UP and FAN for 30 seconds to get into a diagnostic mode. I then had to scroll to page 39 and change the one to a zero (to delete wifi settings). I could now get to a screen to verify my thermostat knew what day it was. Whew. Now I had to go back and program the wifi settings one last time. This was dumb. Just plain dumb. Hopefully Honeywell fixes this in a future software update to allow date and time to be set through the web interface or make it simpler to set on the thermostat without having to forget wifi settings. Dumb.

This was painful. Painful, but mercifully brief. So why do I give this thing 5 stars? Because it works and works well. I don't mind an extra half hour or so of monkeying around and I'm pretty sure I'd have almost as much monkeying around if I paid twice as much for a Nest. Since my thermostat lives in a corner behind a grandfather clock, I cannot believe the nest can "just figure out" when I'm home and I'd rather have a wifi-ready, plain and simple, non-touchscreen thermostat than a Nest, because the Honeywell web site is well laid out and easy to use and there is an iOS app that allows me to get in and change settings from anywhere. Another plus for this thermostat is its shape, I don't have the paint I used in the living room and a small round Nest is going to leave an ugly white square where my old Honeywell manual thermostat used to be for people to see when they walk by the grandfather clock. In short if I bought the Nest, I had to spend up to twice as much AND worrying about matching a paint color from 10 years ago.

I think Honeywell is on the right track with this thing only I say go a little further. Honeywell needs to come up with an even more manual-looking thermostat with only 3 buttons on the thing and have ALL the programming done via wifi. I kept stumbling into programming screens when I was looking for a way to find out what day this thing thought it was. The user interface for this thermostat is just awful. The user interface on the web is great. So why not scrap those extra 4 buttons and give us nothing but up/down and hold? Let us handle the rest over the air. I already own a wonderful touchscreen. It's called an iPhone. I don't need another expensive touchscreen attached to my living room wall.

Find helpful customer reviews and review ratings for Honeywell RTH6580WF Wi-Fi 7 Day Programmable Thermostat, White

I am really pleased with the function of this thermostat, but there were a few problems that had to be worked through before it functioned perfectly.

First, you need to know if you have a "c wire." Before buying a new thermostat, you should remove your old thermostat and inspect your wires to see if you have a "c wire." Our old thermostat did not use a c wire, but there was an unused wire wrapped around the wire bundle. We unwrapped the wire and labeled it "c" as stated in the alternate wiring video on the Honeywell website. Our heating and cooling system's terminal block already had a wire in the "c" position, so we just added the new c wire so that both wires were connected and it has worked fine.

Second, check the security settings on your wireless router. This thermostat does not function properly with mixed security mode (WPA/WPA2). If you experience intermittent connectivity problems, switch to WPA2-only mode.

When we purchased the thermostat we were using a router that used WEP security, and we had no problems using the thermostat's wifi. About three weeks after we bought it we changed internet service. To change the settings on the thermostat, you have to press up and fan for three seconds to get into the menu. Then you have to go to setting 39 and change it to 0 in order to set up the new wifi. Be careful in the menu settings. While trying to deal with the intermittent wifi issues, I accidentally changed the system type to Heat Pump. That caused the heater to come on at the same time as the AC and then a fuse blew on the circuit board. So we didn't have AC for a day. In July. In Texas. Honeywell does not make the menus user friendly, so make sure you are looking at your user manual and you have all of the numbers set correctly anytime you access the menus.

Once we set up the wifi for the new router, it worked for several hours, but then it would no longer connect with our PC or iphone app. This went on for several days. It would lose connectivity, then I would enter the menus to turn off wifi and then turn it on again to get it to connect to the internet. A few hours later the wifi would disconnect again. Then I called Honeywell. As I was explaining the problem, I was trying to explain what solutions I had already tried, when "Daniel" interrupted me with "NO NO NO, don't do that." It was apparent that he did not understand what solutions actually work (at least temporarily) with this problem. I told him that I had already tried the solution he offered several times. Then he told me that the problem was my new router. He said I should replace it. The router works perfectly with 12 other wireless devices. I was sure he was wrong. He was. I then googled "intermittent connectivity wifi thermostat." I got a hit on the Nest website. Here's what Nest says, "In some rare cases, Nest can experience intermittent Wi-Fi connectivity if the security on your Wi-Fi router is set to a mixed security mode (WPA/WPA2). Refer to your Wi-Fi router documentation to learn how to update your security to WPA2-only mode. Once the security has been updated on your Wi-Fi router, reconnect Nest to your home network." Nest was spot on. I changed to WPA2-only mode on my router and my thermostat has worked perfectly ever since. Honeywell doesn't know the solution to this problem, but Nest does.

After finding solutions to the problems I encountered I am overall pleased with thermostat. It is far less expensive than the Nest, but I'm sure Nest must have better customer service. I hope you learn from my mistakes and don't experience the same issues.

Buy Fom Amazon Now

Sunday, June 1, 2014

Discount Cadco KR-S2 Portable Cast Iron 120-Volt Hot Plate

Cadco KR-S2 Portable Cast Iron 120-Volt Hot Plate
Customer Ratings: 3.5 stars
List Price: $200.00
Sale Price: $127.85
Today's Bonus: 36% Off
Buy Now

I wanted to dye wools in my shop rather than in my home and couldn't get an oven approved for the electric in the building so I went shopping. I read reviews and chose the Cadco, Portable Cast Iron Range, model KR-S2. When it arrived I was so excited. I brought my dyeing pots in and didn't have time to dye any wool. Instead, I made soup for a group and let it slow cook all day. There was a new start up smell but I never had any the rest of the day. It cooked consistently. I cooked soup several times before I finally could boil/dye some wools. It did marvelously. No start up smells, consistent temp's and the price was reasonable. I'll buy another one when I need it.

Click Here For Most Helpful Customer Reviews >>

At first I thought it wasn't working...it takes a long time to get the canner water hot. But, I have been using it for three years now and it works great every time! Still looks like new also. Sturdy and apparently well made

Best Deals on Cadco KR-S2 Portable Cast Iron 120-Volt Hot Plate

I love this hot plate so much more than the old coiled plate I owned. The heat is distributed evenly so no burnt areas. Great to have if you don't want to heat up your whole kitchen on hot days. I would buy this again. 5 stars*****

Honest reviews on Cadco KR-S2 Portable Cast Iron 120-Volt Hot Plate

The first time I plugged this in, there was a huge spark and it shorted out the outlet. I moved it to another outlet, and the hot plate started to heat up. After about two minutes, there was an arc from the unit itself and it is now dead. AND the second outlet is ruined. The manufacturer's package was taped on the outside -usually an indication of a remanufactured unit. Don't waste your money on this one. Even though I got an extended warranty, I'm not too keen on getting a replacement unit.

Find helpful customer reviews and review ratings for Cadco KR-S2 Portable Cast Iron 120-Volt Hot Plate

I bought one that looks "exactly" like this one (same stainless body, feet, burner and the knob), so its probably the same physical unit..

My use is to heat water in a teapot. At first I kind of liked it, but in retrospect I would have liked "any" burner of this basic type..

After about 2 years, there is still a chemical smell from the unit (which I dislike very much because I have freed myself from as much plastic and non stick pans as I could; now I am forced to breathe in this mysterious stuff every time I use it)..

Burner rusted in a couple spots.. I thought the coating was some kind of enamel; no such luck.. Yes I put a wet water pot on the burner frequently, but the regular cheapo burners never rusted on me..

Unit is quite large for so basic a function.. And the whole top gets pretty hot; I think a poor design. After the water boils (or oddly even gets close to boiling), and I turn off the knob, it then proceeds to a rolling boil for quite a long time..

Expensive, and I hate it (at least the one that looks exactly like this one) and am shopping for another one.. I cant imagine what this burner would be good for (perhaps slow cooking, because of the heat momentum of the burner, and outdoors so you dont have to breath the unknown chemical vapors)..

bobbler

Buy Fom Amazon Now

Friday, April 25, 2014

Best SUNBEAM Fan Heater, 1 Touch Electric Thermostat,alci Plug Deals

SUNBEAM Fan Heater, 1 Touch Electric Thermostat,alci Plug
Customer Ratings: 4.5 stars
Buy Now
I purchased this little guy from a store a year ago. I loved it then, and it's still going strong now! The thermostat feature is perfect, because I change my mind on the settings constantly, and would otherwise melt/freeze before snapping out of my work to turn it on/off. Especially at night when I'm sleeping.

My two cats love it, too! It's been safe and fairly quiet, while providing a wonderful amount of heat for my living and bed rooms. I am now shopping for a second one to heat up more spaces more quickly.

Click Here For Most Helpful Customer Reviews >>

Great heater for large spaces. We love it. You can leave it on Low all the time and the rooms stay nice and toasty. The purchase price is amazing compared to other makers that cost more and do nothing

Best Deals on SUNBEAM Fan Heater, 1 Touch Electric Thermostat,alci Plug

I've had mine for 3 years and love it! In that time, my husband has had 3 in his bathroom... the last one just stopped working (a Holmes Bathroom Heater). I told him NOT to go out & buy another & I'd try to order him my Sunbeam 1 Touch. So happy that Amazon carries it!!! I recommend that you buy the Sunbeam 1 Touch Heater if you want a great performing heater that will last and last! But I don't understand WHY it's over $50 at Amazon and Under $30 at Walmart. Went to Walmart's website & got it there instead.

Honest reviews on SUNBEAM Fan Heater, 1 Touch Electric Thermostat,alci Plug

I guess I just think this is overpriced for the tiny size and the repackaging it is sent in. But hey, it works so far.

Buy Fom Amazon Now

Saturday, April 5, 2014

Pleasant Hearth Ballard Providence Black Electric Fireplace Review

Pleasant Hearth Ballard Providence Black Electric Fireplace
Customer Ratings: 2 stars
Buy Now
Ordered this for my wife for Christmas. She always wanted a fireplace in our bedroom and this was the way to go. I was excited...the package arrived before Christmas as promised and voila! No fireplace. The item came with just the mantle. The mantle is well made and fairly easy to assemble. As I unpacked the box I assumed the heater would be in the box. Nope. Nada. Zilch. I called Amazon and they were great in helping me resolve the problem. According to them, the item was under review, so hopefully it is fixed and the heater is included.

What threw me off was the BTU's given in the description...not too many mantles I know of have BTU's unless the heater is included! The item shipped was the mantle only and no electric fireplace. Hopefully Amazon found the heaters!

Click Here For Most Helpful Customer Reviews >>

I too only received the mantle the first time I ordered. I called Amazon and told them that the firebox was missing and that there had to be 2 boxes because all of the order would not fit in one. They sent me another one and it did come with the firebox. I have it in my bedroom and it looks very nice. It has 3 levels of flame and 5 levels of heat on thermostat. They also work independently of each other and that was very important to me. I found this at other stores for much more money plus tax and shipping so it's a really good deal if they can get the order right.

Best Deals on Pleasant Hearth Ballard Providence Black Electric Fireplace

Mantle looks nice and as described with easy assembly.

However, I believe the item description is wrong. Firebox is not included with this item. I ordered 3 different times after not receiving the firebox and each time a new one was sent all you get is the mantle and not the firebox/heater. I even had one shipped from manufacture and no firebox. I believe there should be two boxes as part of this delivery or the item description is wrong and you are only getting a mantle.

Buy Fom Amazon Now

Sunday, February 2, 2014

Skytech 3301P2 Programmable Fireplace Remote Control Reviews

Skytech 3301P2 Programmable Fireplace Remote Control
Customer Ratings: 5 stars
List Price: $249.00
Sale Price: $184.01
Today's Bonus: 26% Off
Buy Now

I bought this remote to replace the original remote I had with my fireplace around 7 years ago. My old one was having wiring issues. The Skytech remote was VERY easy to install and use. I really like the backlit LCD screen. Works great and has a nice wall mount. Very light weight and I have not had any problems with it interfering with our wireless network. It is programmable or just set it to a temp you want and it works great! No complaints.

Click Here For Most Helpful Customer Reviews >>

Works GREAT!! Easy to install, works flawlessly. Now we no longer have to bend over, press the Pilot button to light our stove, just simply sit back, press the button and WOOSH.

Best Deals on Skytech 3301P2 Programmable Fireplace Remote Control

I primarily have used it like a thermostat. Before installing the Skytech the only control was a simple switch on the side of the gas fireplace insert. If I didn't pay close attention the room would get way too hot. Now the Skytech cycled the gas on and off to hold a steady temp.

We keep the furnace set much lower now and just heat the great room we occupy the most.

Honest reviews on Skytech 3301P2 Programmable Fireplace Remote Control

I hooked this up to my Quadra-Fire Classic Bay 1200 Pellet Insert. It took me 10 minutes to install, and it works perfectly. If you are looking for a high quality programmable wireless fireplace remote for your pellet stove, this is the one to get! You will be very happy with your purchase, it's excellent and provides everything we were looking for.

Find helpful customer reviews and review ratings for Skytech 3301P2 Programmable Fireplace Remote Control

Product came with receiver and transmitter....and even batteries, although the two AAA batteries were too weak to use. This caused alittle anxiety as I first thought the transmitter wasn't working! Alas, I replaced the "new" AAA batteries....whua, lah...the unit worked perfectly. Packaging and delivery was great....keep up the good work!

Buy Fom Amazon Now

Monday, December 30, 2013

Cheap ecobee EB-STAT-02 Smart Thermostat 4 Heat-2 Cool with Full Color

ecobee EB-STAT-02 Smart Thermostat 4 Heat-2 Cool with Full Color Touch Screen
Customer Ratings: 4.5 stars
List Price: $454.00
Sale Price: $245.30
Today's Bonus: 46% Off
Buy Now

After weeks of putting up with two flaky Nest Learning Thermostat 2nd Generation T200577 units, I gave up on Nest and decided to give this a shot. So far, it's been pretty decent.

Since the two are similarly-priced, and there are lots of reviews about each model, I'll offer a comparison.

INSTALLATION:

Without question, this is harder to install than a Nest. In saying that though, some people are going to find the installation much easier than others.

First, the ecobee has a relatively large panel that needs to go "somewhere" between your furnace and thermostat. For my setup, my furnace and thermostat share different sides of the same wall. So, wiring could have been as simple as cutting the thermostat line somewhere in the middle, wiring up R/W/G/Y in the panel, and using the remaining wire to do +/-/I/O to the thermostat.

The tricky part is getting power to the panel. I decided I was going to run a common wire, and after changing out the physical wire, I realized that I didn't know as much about 24V as I thought. Now, I *could* learn some more about HVAC wiring, or I *could* check and see if I have a 12V wall wort type of transformer.

Sure enough, I had a 12V transformer from an old Linksys router, and my power problem was easily solved. Then I connected my humidifier to the first ACC terminals, and I was set.

The Nest, on the other hand, required no wire cutting, and draws power from the existing wiring. However, it's notoriously unstable. Om my particular system, it would complain about improper wiring for ten minutes or more, if the power had been cut. Others have reported the battery slowly discharging. Easy to install, not so easy to maintain.

INTELLIGENCE

The Nest tries to learn when you come and go, and when you adjust the thermostat, and creates schedules accordingly. In my experience, it creates them totally wrong -not noticing for hours when the house is empty, arbitrarily turning on the heat to a temperature it had never been set to, allowing a wide variance on either side of the temperature you set it at.

The ecobee, on the other hand, tries to learn how your house and furnace work. It isn't going to learn that you like it to be 73 when you first wake up, but it is going to learn how long it takes to make sure your house is 73 when you tell it you wake up.

CONNECTIVITY

Both Nest and ecobee offer a web interface. Nest is bright, clear, and easy to use. It's like using Apple's iCloud service. On the other hand, ecobee is full of options that aren't necessarily clear to laypeople, was designed for someone data-driven, and is as inviting as reconfiguring your home router for fun.

On the IOS / Android side, Nest presents a smaller (though fully-functional) version of their web interface. Brilliantly, ecobee did just the opposite. Their mobile application presents an interface that looks just like your thermostat's interface. Very, very smart.

DATA

Nest shows you a cute daily bar that represents 24 hours in a day. When there's a red slash, the furnace was on. Blue for A/C. Some days, you'll get an arbitrary leaf.

Fire up Microsoft Excel 2010 if you want to get granular with the ecobee, because every five minutes, it logs:

*Date

*Time

*System Setting (heat / cool / off)

*System Mode (compressor, heating stage, etc.)

*Calendar Event

*Program Name

*Cool Set Temp

*Heat Set Temp

*Actual Temp (accurate within 1/10 degree)

*Humidity Set Point

*Actual Humidity

*Outdoor Temp

*Wind Speed

*Cool Stage1 (seconds)

*Heat Stage1 (seconds)

*Fan (seconds)

*Humidifier (seconds)

*DM Offset

So, you wind up with something that looks like this:

Date Time System Setting System Mode Calendar Event Program Mode Cool Set Temp (F) Heat Set Temp (F) Current Temp (F) Humidity Set Point (%RH) Current Humidity (%RH) Outdoor Temp (F) Wind Speed (km/h) Cool Stage 1 (sec) Heat Stage 1 (sec) Fan (sec) Humidifier (sec) DM Offset

12/3/2012 0:00:00 cool compressorCoolOff Kevin Up 72 68 71.8 0 49 45 0 0 0 120 0

12/3/2012 0:05:00 cool compressorCoolOff Kevin Up 72 68 71.9 0 50 45 0 0 0 0 0

12/3/2012 0:10:00 cool compressorCoolOff Kevin Up 72 68 71.9 0 49 45 0 0 0 270 0

12/3/2012 0:15:00 cool compressorCoolOff Kevin Up 72 68 71.8 0 50 45 0 0 0 180 0

It's exportable as a CSV, or if you want to scour your info from ecobee's page, it looks like they've got some RRDTool implementation running.

CONSTRUCTION QUALITY

The Nest is the one that's going to impress. It feels substantial, it looks beautiful, and any monkey can use it.

This thermostat is the one that makes people say "...but it has a great personality, and really nice hair". The interface looks and feels about a decade old, the touchscreen is more than a little temperamental about registering taps, and the unit itself ls flimsy plastic to Nest's steel and glass.

VERDICT

I'm reserving some judgement to see how my next bill looks. The Nest actually increased my electric bill, and kept my gas bill at the same usage as my previous furnace, which was rated at 15% lower AFUE. Like the Nest, and its eight updates, I plan to update this.

If you put a gun to my head, I'd say the ecobee is the more serious thermostat. So far, I'd buy it again.

UPDATE: 02/26/13

I noticed a request or two for an update, so here goes...

Now that I've had the Ecobee for a while, my gas usage is down 30% year-over-year. Part of that is a more efficient furnace from last year. But when comparing to the Nest I had, my gas usage went down in spite of the weather getting colder. So the actual Ecobee-vs-Nest savings is fairly substantial.

What I like the most, though, is that the Ecobee lets you get very granular. Want the fan to operate for 15 minutes out of every hour? No problem. Want to set up different temperatures every half hour? Done. Need the humidifier to operate independently of the heat? Just connect the wires to the brain board.

So in addition to saving gas, I'm also able to circulate the air -keeping the temperature even throughout the house, and filtering it -and make a nighttime schedule that drops from 72 to 65 so gently, you'd hardly notice. There's something psychological about hearing the air circulate, I guess.

As far as intelligence and reporting, there's so much, it's probably easier to type out what's on the HomeIQ page:

First, you get the crazy metrics I pointed out above, presented in a graph.

Then, another runtime report that charts how long your HVAC system ran, and another tab that adjusts the runtime to external temperature.

And then... insights (and I'm typing these out as they appear):

Your Ecobee saved you 4%

Your Ecobee rating: **** / ***** (This is a calculation of how your house retains heat)

Your system ran 7% less than the average for your state / province

In January, your heating ran for 124 hours. This was 43 hours more than the previous month.

Your performance is influenced by a number of factors:

1) Weather -In January, your average weather was 27.1 degrees Fahrenheit. This was 5.7 degrees colder than the previous month.

2) Weekly Schedule -In January, your average heat setpoint was 70.2 degrees Fahrenheit. This was 0.3 degrees warmer than the previous month.

It's all displayed as infographics, and looks really sharp. Compared to "You got a leaf for today", Nest really can't hold a candle to it.

All things considered, this is the thermostat for any true geek who wants to build an insanely custom HVAC system, or for someone who enjoys never having to check the thermostat, because the temperature is so well-balanced after investing some programming time. I'd absolutely buy this again.

Click Here For Most Helpful Customer Reviews >>

Synopsis:

Yes, this is a pricey thermostat there is no disputing that but, this isn't a clunky time clock that just adjusts the temperature set point a few times a day either. Plain and simple, it's a computer to monitor and control your home environment and it does this very well.

Prior to purchase...

The Ecobee website (ecobee.com) has links to download the installation and operating manuals and is well worth a look prior to purchasing the unit. There are no fewer than a dozen different wiring diagrams for various single or multi-stage configurations including heat pumps.

My situation:

I purchased the EB-STAT-02 for my vacation home. I may use the home on the weekend, a couple of weeks in a row or, I may not visit for a month. A traditional "time clock" thermostat just doesn't fill the need I may as well just have a conventional thermostat and deal with waiting for the system to adjust when I arrive.

Complicating my irregular visitation and use of the house, I have a somewhat unique 2 stage heating / 1 stage cooling system. Not that it's all that "unique", it's just not typical. I have a hydronic radiant floor heating system as stage 1 that is augmented by electric forced air as stage 2. Cooling is via a single stage forced air system. A radiant floor heating system is very slow to react to significant temperature changes. What this means is that if I just drop in unplanned for a winter weekend, the weekend may be over before the stage 1 temperature to comes up to its set point. The ability to adjust the settings remotely is *huge* for me. (I know, I know radiant floor heating for a vacation home?? It's a future retirement home too!)

The installation:

Given the fact that there is no industry color standard for control wiring for residential heating and air conditioning, the installation for my system was likely more difficult than most will ever experience. Did I mention that I also have sensors for the floor slab temperature and outdoor temperature adding 4 more wires into the mix? (I purchased the remote sensor module add-on for up to 4 external sensors.) This is where Ecobee's tech support comes in. Even though the Ecobee website is up front about urging you to find a contractor in your area to install your stat and the warranty contains the standard disclaimers to discourage DIY'ers, Ecobee's tech support was great. I communicated with them via email since I wasn't at the house and I was pre-planning. I emailed them diagrams of my previous stat wiring and what I thought was the correct new wiring, asking for opinions. They identified a jumper that I needed for proper staging. Email responses weren't instantaneous, it took a day or so but, if I was in a hurry, I would have called.

Setting the thermostat up for internet access (wireless!) was completely painless. Typing on the thermostat's on screen "keyboard" was a lot like sending email on a smart phone cumbersome to me but not too bad.

Operation:

My thermostat is all connected now and working fine. I still have to review and tweak the program settings to decide things such as what the temperature differences between stage 1 and 2 should be. There are numerous customizable settings in addition to the typical wake up / away / return / sleep time settings.

Internet Access!

After the initial installation and set-up, I seldom make any changes on the thermostat, I use my browser instead. I go right to my thermostat and monitor what the set point is and adjust it if I want to. I can review and download the temperature set point data, internal humidity and temperature readings and even have it email specific data to me such as temperature out of range and air handler filter change needed.

Smartphone Access too!

Although not as comprehensive as the web browser access, there is a free app for your Smartphone that you can use to make adjustments.

Summary:

All in all, I'm very pleased with the Ecobee thermostat, the only drawback (if you can call it that) is price. However, it's not at all fair to compare the price of this unit to a traditional thermostat because feature-wise, there is no comparison. It's like comparing a radio to the HDTV on either device at the end of the ballgame you'll know who won, but it's a very different experience getting there.

Best Deals on ecobee EB-STAT-02 Smart Thermostat 4 Heat-2 Cool with Full Color

Last fall I purchased two different "smart" thermostats to try out before we made a decision on which to use throughout our home. The ecobee was recommended by a local architect. We've used the thermostats for 5 months straight, and I think we will likely go with the other brand due to ease of installation and ease of use issues with the ecobee. That said, the ecobee is a good product.

Pros:

-Reliable. While occasionally the ecobee seems to spontaneously go offline and display its flapping wings logo (is it updating itself?), it always comes back online automatically and has never required a reset.

-Reasonably good looking

-Programming using the web-based interface is easy

-Does what it is supposed to do and is controllable remotely if you create an ecobee account and link the termostat

-Allows for direct control of variables like temperature differential (i.e., do you want it to turn on and off at +/1 degree from the set temperature or +/2, etc.)

Cons:

-Thermostat touch screen is a textbook example of bad user interface design -i.e., they opted for a slick looking slider instead of simple +/buttons. I do not have large fingers and I can almost never get the slider where I want it on the first try. It drives me nuts that the hardest thing to do on this user interface is set the temperature.

-The iPhone app is very limited and similarly frustrating. For example you can do a temporary override to any temperature but you cannot change the duration of the hold (it defaults to 4 hours). Or you can enter "quicksave" mode which indefinitely lowers the temperature by a preset amount (default is 4 degrees), but you cannot change the amount of the temperature change from the app. For most other functions you need to log in to the website to control remotely or program.

-Install requires someone reasonably knowledgeable about his or her HVAC system or else professional installation

-Because it requires installation of two boxes (interface module connects to heating and cooling systems while the thermostat connects to interface module) it might require a significant run of new wire unless the heating and cooling system controls are in the same location. For most people with forced air systems this is not an issue, but could be when combining AC with steam or hot water baseboard systems.

Honest reviews on ecobee EB-STAT-02 Smart Thermostat 4 Heat-2 Cool with Full Color

My wife and I recently purchased a new heat pump unit and wanted to upgrade to a programmable thermostat. We actually saved up too much money for the heat pump unit and had some extra money to spend. After looking at all the fancy, touch-screen programmable thermostats, I settled on this one. Yeah, sure, it's pretty pricey, but I think it's worth it.

Installation was pretty simple. I am no HVAC technician, but I was able to figure out the colored wires from the old thermostat and match them with this one. My setup is pretty simple, electric heat pump with heating and cooling modes, and the auxiliary electric heat, but there are plenty more pins for more complicated equipment setups. For those kinds of setups, I would definitely recommend hiring a real technician. One thing I liked about this unit's installation was the two-piece setup. The touchscreen part mounts wherever your thermostat is traditionally mounted. Then there is another control board that mounts out-of-sight. Fortunately, my thermostat was mounted on the outside wall of a utility closet, so this gave plenty of room to install the control board inside the closet. If you don't have the option to mount inside a closet of sorts, the control board is in a nice, clean enclosure with some LED status lights.

As for using the thermostat, it's a breeze. You can do the heating and cooling temperatures right on the home screen. It's also nice that it has a weather display of the current conditions, and you can even dig deeper into the forecast. The installation wizard was simple (for my basic system), and everything feels pretty intuitive. I would recommend using the Ecobee.com web site to do the actual time-of-day programming. There are 4 modes: awake, away, home, and night. You assign temperature ranges to each of those modes. Then you assign those modes to 30-minute chunks of each day for the week.

The only problem that I have with this thermostat is that I can never seem to get it to report the correct temperature. I've been monitoring the temperature reported by the thermostat alongside another couple of digital thermometers, and the thermostat always seems to be off by 1-2 degrees. There is a setting in the thermostat that allows you to adjust the displayed temperature by a few degrees in half-degree increments. However, I always seem to overshoot it or undershoot it, but I'm not sure how. It seems like it may be overcompensating somehow? It's either that, or it only takes temperature readings every 15-30 minutes. I'm not sure which.

I almost forgot to mention that there is an iPhone app for controlling the thermostat remotely. It's a little buggy and could maybe do with a little more "polish", but it gets the job done. The bugginess is that it seems to have issues authenticating you or connecting to the thermostat every now and then. It's intermittent, so waiting a couple of minutes may clear the issue up. Also, if you adjust the thermostat heating and cooling sliders, it may take a while for it to actually take effect on the thermostat itself. The trick is to wait for the mode icon to change to the resume icon to know that your settings were saved. If you exit out of the app without waiting for this confirmation, it will never save. Besides the couple of minor flaws, it's nice to be able to put the thermostat into "save" mode if you're out of the house and forgot to set it before you left.

There are a couple of other features like vacation mode that I haven't used yet. In all, after doing many hours of research, this is the only internet-enabled touchscreen thermostat that I would buy. In my opinion, it is the best one on the market (as of the time of this review).

Find helpful customer reviews and review ratings for ecobee EB-STAT-02 Smart Thermostat 4 Heat-2 Cool with Full Color

Update: I wrote the below review in mid 2011. I have had a year of use with the ecobee and still believe it is an excellent product. I have however found some minor shortcomings and am also reviewing some other home automation products.

In hindsight I may have considered another option for a thermostat that could be accessed via a larger home automation scheme. If all you need is a good thermostat to access remotely this is a very good solution. If you are like me however and want to expand on the concept the ecobee is limited.

My first update indicated that the ecobee lacks Home Automation capability. In fact it can be extended to Zigbee module. I have not net investigated this capability so I do not know how it compares to other Zigbee or Z-Wave products.

Original review:

I purchased the ecobee thermostat to remotely control the HVAC for our vacation property. We don't always know when we will be there, and it is also nice to be able to adjust the temperature after I've driven off and forgotten to do it.

The Ecobee is a fully Programmable Thermostat that lets you operate it remotely over the internet. The unit does require a WIFI connection so that it can connect to the Internet. Remote access is actually done via Ecobee's servers and website. After the unit is configured for your WIFI Router it then starts communicating with Ecobee directly. You will set up an account with an Email Address and Password via the Thermostat. Once done you can now log on to Ecobee.com and access your unit. You can also do this with an Application on your smartphone (IPhone?) but with more limited capabilities. Very cool!

I installed the unit myself but I'm not sure I would advise this as a DIY project unless you have some knowledge of HVAC wiring and controls. The vast majority of us do not. I have a Heat Pump and failed to initially configure the Ecobee for this, so I was struggling to understand why I had no cooling. I was having discomforting thoughts of having to call a Technician to bail me out before I baked to death in my Condo. Alas I figured it out.

Traditional thermostats control your Furnace and Air Conditioning over only a few wires. In older homes that have thermostat wire with 5 or fewer strands this can present real limitations, especially for newer Two Stage Furnaces or Dual Compressor Cooling Units. Add to that Heat Pumps, Auxilary Electric heating, Dehumidification, or Humidification features, and there is no way to do this with only a few wires. Enter the concept of an Equipment Interface Module. Basically this is a separate control unit that is mounted directly to your Furnace/Air Handler and can be wired directly with a much larger selection of options. The thermostat no longer controls your Furnace directly but communicates digitally to the Equipment Interface Module using only the few wires you have in your wall. Many modern high end HVAC units now work this way. The Ecobee functions just this way.

Installation.

Ideally you would just mount the Module to the side of your Furnace or Air Handler. In my case it was a very tight fit to be able to service it so I purchased some 6 inch 'L' brackets from the hardware store and mounted it that way. Next I had to wire it. I searched locally for some thermostat wire to connect the module to my Furnace but no one had anything with more than 5 strands. I ended up driving further than I would have liked and found some 7 strand. I then disconnected the existing thermostat wire from my furnace and tried to connect it to the Module. This would be my communication wire. Too short! I had to splice in an piece to make it reach. Next I installed the new piece of 7 strand wire between the Module and my furnace. Finally I installed a piece of 2 strand wire from the 24VAC supply inside the furnace to power the Ecobee Module, otherwise you will need to buy an AC Adapter. From there it was just turning the breaker switch back on and getting things configured.

Programming is best done from a web browser and internet connection. Use the mouse to drag the 7 day calendar, then select the mode Icon (Sleep, Awake, Away, etc.). Then select the Edit Icon to adjust the mode temperatures. Once you have figured out how this works it is a breeze. I was surprised also with how easily it connected to the internet and became accessible to me. It seems very well sorted out from that standpoint. I don't feel at all like a new adopter guinea pig. By comparison it took me hours recently just to get my E3000 Cisco WIFI router working, a technology that should now be very mature. The Ecobee is without a doubt one of the coolest gadgets I have purchased in a long time. The fact that I can actually see what the temperature is in my Condo and adjust it with a finger drag on my Iphone is really futuristic stuff.

Buy Fom Amazon Now