Showing posts with label intertherm thermostat. Show all posts
Showing posts with label intertherm thermostat. Show all posts

Thursday, January 8, 2015

Mr. Heater Big Maxx 45,000 BTU Natural Gas Garage Unit Heater Review

Mr. Heater Big Maxx 45,000 BTU Natural Gas Garage Unit Heater #MHU45NG
Customer Ratings: 4 stars
List Price: $774.86
Sale Price: $519.46
Today's Bonus: 33% Off
Buy Now

I have had the 45,ooo btu Big Maxx heater now for about 4 years. Every winter is a new set of repairs and continued repairs to keep it working. I leave my step ladder set up next to it because I am constantly working on it to keep it heating. I have ordered my 4th circut board to be put in this time. There is a bad connection in it now so I have touch the circut board everytime I want it to start heating. The others were shorted out because there is no fuse on the circut board. I would recommend spending a little more money and getting a better, lower maintenance heater.

Click Here For Most Helpful Customer Reviews >>

We used an unvented natural gas heater in our garage for several years. With many more cold days this past winter, we began having concerns with the excess amount of moisture and condensation produced by non-venting. Having already roughed-in the electrical and thermostat wiring for a unit heater when the garage was built, we decided it was time to switch to a vented heater.

We looked at the Modine and Big Maxx heaters and selected the Big Maxx 45 when it went on sale for $399 at Northern Tool. We ordered the heater and had it shipped to a store in our area to avoid shipping charges. The heater arrived much quicker that we anticipated. Our original plan was to install the heater sometime during the summer and be ready for next winter. The next weekend was nice weather so we decided to go ahead and install the Big Maxx.

Since the heater needed to mount at a 45 degree angle to the room, we mounted unistrut channel to the ceiling joists and mounted the heater thereto. We used category I gas vent from Lowe's. Installation was simple and straight forward. Then we turned the heater on.

The induced draft motor made a LOT of noise and vibration. Then the blower fan came on and you needed hearing protection to stay in the room. In the bedroom above the garage, it actually sounded like someone was running a couple of hammer drills. Being an engineer, I inspected both blowers to see why they vibrated so badly. The induced draft blower had a nice looking squirrel cage blower but the shaft hole was drilled off center. The next day we took the heater down, boxed it up and returned it to Northern as defective.

Next we ordered a Modine heater. Installation was a little more complicated because we already had the hole in the wall for the vent. We mounted this heater slightly differently to take advantage of the existing hole. This heater required Category III venting for our installation so we ordered Z-Vent online. The Modine heater is quiet as a mouse. As they say, "you get what you pay for".

Best Deals on Mr. Heater Big Maxx 45,000 BTU Natural Gas Garage Unit Heater

I bought this unit in Nov 2007. I have had trouble with it from day one. The company has been good to work with ( they sent replacement parts) but it just stopped working again. Parts come but takes 2 weeks or so. They don't rush it. 3 times now in 4 months. It is garbage and should be recalled and taken off the market. Spend more or get a different brand but stay away from this. I put one star only because that was as low as it would go.

Honest reviews on Mr. Heater Big Maxx 45,000 BTU Natural Gas Garage Unit Heater

I got this heater for my garage office. It works as described and no problems thus far. Installation was easy and remember to bleed the lines first before attemting gas hookup.

Find helpful customer reviews and review ratings for Mr. Heater Big Maxx 45,000 BTU Natural Gas Garage Unit Heater

I've had the Big Maxx 45,000 btu heater for about one full year now and am overall quite satisfied with the unit. It's installed in a converted to theater room, detached 24x24 foot garage with a 10 foot ceiling that is well insulated. I keep the thermostat set at 50 degrees and warm it to 72 degrees when we watch movies and that takes about 20 to 30 minutes when outside temps are around 20 degrees. The heater has worked flawlessly except for a cracked circulation fan which customer service was extremely helpful in replacing. My only complaint is that this unit is too loud (65 to 70db) for a theater room type application. We get around this issue by first warming up the room then running a very quiet electric heater that keeps the temp constant. For a garage or workshop application, this heater is perfect and fairly easy to install if you're handy with tools. Recommended!

Update; I finally determined that my inducer (exhaust) fan has been the noise maker. I called customer service and they sent me a new fan and associated gaskets. Installed the item and now this heater is much, much quieter. Kudos to a great customer service dept.

Buy Fom Amazon Now

Saturday, January 3, 2015

Reviews of Sunbeam Twin XL Heated Mattress Pad

Sunbeam Twin XL Heated Mattress Pad
Customer Ratings: 4.5 stars
List Price: $72.06
Sale Price: $62.95
Today's Bonus: 13% Off
Buy Now

I love this mattress pad!

My husband and I have an adjustable split king bed he has ALS, and needs the adjustments to assist with transferring in and out of bed and helping to make breathing easier... He is alway hot, and I am always cold. It is difficult to find things that fit our bed we need twin XL fitted sheets, and Cal. king blankets.. This twin XL mattress pad is perfect! I have it on my half of the bed husband doesn't need the heat at all. I set it on high about 5 minutes before getting into bed, then turn it all the way down to low or level 2 for a warm and toasty night. It has transformed my night experience!

Click Here For Most Helpful Customer Reviews >>

It heats up quickly and stays very warm for 10 hours. I enjoy getting into a warm bed and helps calm me down after a long day.

Best Deals on Sunbeam Twin XL Heated Mattress Pad

If you have a twin XL-sized bed and want warmth, this is the pad to have. It fits a Twin XL bed perfectly and would fit a VERY deep mattress, if need be. The one thing I do not like is that the skirt around the sides is a pretty flimsy material, but since I plan on using another mattress pad over this one, to pad the wires more and keep it clean, I won't be removing/washing it too often, as I would the regular mattress pad. I pre-heat the bed on high, for a few minutes and then lower the temp to low(1) or 2, which I find to be perfectly warm all night long. You can feel the wires some through the pad, but I solved this problem by placing my regular mattress pad over this one. The included controller looks nothing like the one in the picture. So far, no durability issues. I will update, if I have any.

Honest reviews on Sunbeam Twin XL Heated Mattress Pad

This mattress pad is great! We replaced another older heated mattress pad and this new one gets warm pretty fast within 5-10 minutes and can get almost too hot if it's left on High. It's so nice to get into a warm, toasty bed. This Sunbeam pad is highly recommended compared to other brands.

Find helpful customer reviews and review ratings for Sunbeam Twin XL Heated Mattress Pad

Ordered this mattress pad to put on our split-king Sleep Number Bed. The twin-XL fits each mattress well and quality is very good. Warms quickly and keeps you nice and toasty! Auto shut-off is a nice feature. Definitely worth the price.

Buy Fom Amazon Now

Friday, November 14, 2014

Best Cuisinart CFO-1000 Lazy Susan Electric Fondue Maker Deals

Cuisinart CFO-1000 Lazy Susan Electric Fondue Maker
Customer Ratings: 5 stars
List Price: $145.00
Sale Price: $79.95
Today's Bonus: 45% Off
Buy Now

Great Foundue. I bought two of these at the time I ordered it. The electical cord is a little short but I could deal with that. I did a good job heating the cheese and clean up was very easy. I would buy another one. But I already bought two. I bought two for one reason. Holiday time. Keeping dips warm for holiday party's and one dipping fruit into white or dark choc.

Click Here For Most Helpful Customer Reviews >>

My family of five loves fondue. I've owned maybe 4 different fondue sets over the last 20 years, but recently researched for what I thought would be the best fondue set available, within limits of cost. The CFO-1000 has everything I needed: Stable pot or legs, magnetic release electrical cord, Teflon coated, can use with cooking oil(not all fondue pots are designed for oil), very precise 10 point temperature control dial, heavy gauge aluminum pot, 3+ quart tank which will accommodate up to 8 fondue forks and completely, completely dishwasher safe! The lazy-susan is just a bonus and it really is a great lazy-susan. The legs that elevate this fondue pot are made from a high-impact type plastic and are very securely attached to the pot, which makes this pot unbelievably stable. This pot should realistically last a lifetime. Every part on this set, including the legs, heating control dial and electrical plug-in, are all individually replaceable. Heating element burns out...order a new heating element and not a whole new set. Good Luck!

Best Deals on Cuisinart CFO-1000 Lazy Susan Electric Fondue Maker

present for hubby who cooks as good as my mom! Happy father's day! The quality of this fondue set is outstanding!

Honest reviews on Cuisinart CFO-1000 Lazy Susan Electric Fondue Maker

I love this brand is one of my favorites, what I like most is his style and is ideal for the whole family. certainly one of the best fondue I've had.

Find helpful customer reviews and review ratings for Cuisinart CFO-1000 Lazy Susan Electric Fondue Maker

Tired of not being able to keep oil or broth hot enough for meat fondue on traditional fondue pots, we switched to this electric and are very pleased. Fondue stayed hot through the whole meal, and when it got too hot, a quick turn of the knob lowered the temp very quickly. The forks were great quality too, though I wish they were a bit longer they are slightly short for fondue forks. If it came with 8 condiment/sauce dishes for the lazy susan, I'd give it 5 stars. There's plenty of room for more dishes, but no way to even order more as accessories. Also, the lazy susan tends to be a little difficult to turn it sticks at times. It's not a big deal, but if I were trying to improve the product, I would address that. Warning the cord is very short. It didn't matter to us, as we were using an extension cord anyway, but the cord is much shorter than I have ever seen on any kitchen item. Superb temperature control plus the lazy susan for access to sauces or dipping items make this a winner.

Buy Fom Amazon Now

Thursday, August 21, 2014

Buy Riverstone Industries Electric Fireplace Mantel Oak

Riverstone Industries Electric Fireplace Mantel Oak
Customer Ratings: 4 stars
List Price: $299.99
Sale Price: $289.47
Today's Bonus: 4% Off
Buy Now

The flames do not look as realistic as the photo. Heater does not put out as much heat as expected.

Click Here For Most Helpful Customer Reviews >>

It is just the perfect size for our RV. And I put it together in about 2 hours... simple instructions,And it was delivered much sooner than I thought it would be with the holiday shipping rush!Thank You Again

Best Deals on Riverstone Industries Electric Fireplace Mantel Oak

It gives off good heat in the room. I am thinking about ordering another one for a different room.

Definitely recommend it!

Buy Fom Amazon Now

Sunday, August 3, 2014

Honeywell RTH111B H/C Digital Manual Thermostat Review

Honeywell RTH111B H/C Digital Manual Thermostat
Customer Ratings: 4.5 stars
Buy Now
Easy to install, simplistic to use. Just select the desired unit, heater or aircon, then select the temperature. It holds within +/2° to 3°. No messing with programing of off/on, different temperatures, times and then having to do it all over again after you have made a manual change. Good for folks that have trouble setting the correct time on their VCR. Would be better if it had a back lighted LCD. Much better than the old mechanical thermostat.

Click Here For Most Helpful Customer Reviews >>

I replaced one of the old round bi-metal spring thermostats with the Honeywell RTH111B. The Honeywell works great and keeps the temperature where I set it. It has no "bells and whistles" as you'd expect for the price. Only thing I did not like is that the slide switch for Heat-Off-Cool is quite small and it's not always obvious at which position it's set.

Best Deals on Honeywell RTH111B H/C Digital Manual Thermostat

I purchased this non-programmable thermostat to install in the portion of my two-family home that I rent out. I also purchased the similar Honeywell RTH221B Basic Programmable Thermostat programmable model for my own portion of the residence. Installation of both models is identical, and the main difference between the two is just the ability to set up a program of varying temperature changes based on your schedule. The non-programmable RTH111B has no clock feature. Just simple buttons to change the temperature up or down, and switches for a system fan (if applicable) and the HEAT-OFF-COOL selection.

The apartment that received the RTH111B is a simple heat-only gas powered baseboard system. The installation instructions were generally easy to follow, but I also found additional information on the Honeywell website explaining what each terminal actually was. It would have been useful for Honeywell to print this in the instructions. Summarized:

Rh : Heating power supply

Rc : Cooling power supply

W : Heating signal

Y : Cooling signal

G : Fan

The two heating systems in my home are both ONLY heat, and have a two-wire connection. The wiring looked about a hundred years old, but still worked perfectly once I connected the wires to the Rh and W terminals. Interesting to note that in both installations it did not seem to make a difference which of the two wires went to what terminal, so long as it was Rh and W. However in a more complicated system that includes more wires for cooling or a fan, I'd use the included labels to mark each wire and be certain it was connected properly.

I don't have any dollar amount savings to offer, but I can say that the temperature was MUCH more consistent in my apartment than it had been with the old round-style mercury switch which was prone to large temperature swings. There is no question in my mind that less fuel was used, and it's very likely that the two thermostats I purchased have already paid for themselves one month later.

Honest reviews on Honeywell RTH111B H/C Digital Manual Thermostat

I purchased this unit as a recommended 'garage thermostat'. I installed it for sporadic operation of my garage heater, during the winter in North Dakota. Needless to say it gets cold here, which is why we need a heater. But I also don't intend to waste the power necessary to keep my garage above 40 degrees all winter so would only use this on occasion. Onto the design flaw that I still can't believe...

This unit will literally not operate below 32 degrees. Going in, I knew it was only programmable down to 40 degrees, so it would not maintain a temperature of less, but since I only planned to use it sporadically, that wasn't an issue. The problem is, it won't even turn the heater on below 32. At all. I confirmed this was intentional design by Honeywell, which makes me seriously question the engineers they have designing their products. Not only that, they don't offer ANY thermostat without this flaw. Imagine, a thermostat for a heater that makes it impossible to heat because it's cold...umm...really? The old $3 Hg-filled manual junker I was replacing with this worked just fine below freezing.

Let's look at scenario 2: I lose power at my house for an extended time and it gets cold. When the power finally comes back, I can't turn my heater on to finally heat my house because the thermostat says 'nope, it's cold, no heat for you'. Honeywell's suggestion? Wait until it gets above 32 on its own, then I can run the heater...so basically, you can heat if it's already warm, but not if it's cold.

Sorry, a-returning this product will go.

Otherwise, if you're looking for this in a completely different application....The unit was easy enough to install. The directions weren't great, but they don't have to be. Any typical homeowner should have no problems. Unit looks good enough, and for the 5 minutes I played with it after install it worked well enough (I'd heated my garage so it actually worked for a few mintues).

Find helpful customer reviews and review ratings for Honeywell RTH111B H/C Digital Manual Thermostat

Nice basic digital thermostat.

Manual heat/cool controls.

Manual fan control.

Digital adjustment of temperature that is accurate.

No backlight on ours, probably to save battery life.

Easy to install.

Great for replacing old mercury thermostats...please remember to dipose of mercury properly.

Buy Fom Amazon Now

Saturday, July 26, 2014

Discount Grohe 47 157 000 Thermostat/Pressure Balance Valve Cartridge for 35

Grohe 47 157 000 Thermostat/Pressure Balance Valve Cartridge for 35 250 Series.
Customer Ratings: 3 stars
List Price: $104.00
Sale Price: $67.71
Today's Bonus: 35% Off
Buy Now

Well, I called Grohe and ask them for help after my plumbing was frozen in the January Chicago storm. The tech told me by replacing this along with the check inserts should fixed the problem. No such luck after both parts installed the rough-in is still leaking. Now I have to order the new rough-in and replace everything else.

Click Here For Most Helpful Customer Reviews >>

Wednesday, May 7, 2014

Reviews of Digital Electronic Egg Incubator Thermostat with Remote Sensor

Digital Electronic Egg Incubator Thermostat with Remote Sensor
Customer Ratings: 2 stars
Buy Now
I bought this thermostat for my incubator that I hatch chicken eggs in. The problem is this thermostat was 16 degrees off and it only lets you adjust it 5 degrees when you calibrate it. I can just falsely adjust the temp to way below 99.5 degrees (to 88.6 in this case) but when the power goes out it will reset itself and then the temps in the bator shoot up to 110 degrees!!! It's off/on cycle is also too far apart to be a great thermostat for incubating eggs. In other words it gets really cool before it clicks on and the on cycle warms up quite a few degrees before it shuts off again. I need something with a shorter (not delayed) on/off cycle.

I will be spending a little more on a much better thermostat.

Click Here For Most Helpful Customer Reviews >>

This temperature controller was a little tricky to hook up and figure out the wiring.

Then it worked for a day and stopped working.

I opened it up to try to see if there was a fuse of something. I could see nothing wrong.

Best Deals on Digital Electronic Egg Incubator Thermostat with Remote Sensor

I bought 2 of these last year just had the second one fail lost over 100 goose eggs this time first time I only lost couple dozen if you are installing these you really need a backup system or an alarm will never use them again

Honest reviews on Digital Electronic Egg Incubator Thermostat with Remote Sensor

I'm very pleased. Easy to install and seems to be right on temperature based on a separate electronic thermometer I set inside as a test. Exactly what I wanted and good delivery. Thanks

Buy Fom Amazon Now

Tuesday, April 22, 2014

Buy Taylor TruTemp Digital Cooking Thermometer with Alarm

Taylor TruTemp Digital Cooking Thermometer with Alarm
Customer Ratings: 2.5 stars
Buy Now
Good product. Accurate, easy to use, inexpensive and wide temperature range. Many digital thermometer have a minimum temperature of 32F, so you cannot use them to check your freezer. This product has a range of -40F to 450F so it will do both oven and freezer. Tested in an ice water bath, it was only off about 1F, better then others I have measured. Comes with a neat magnetized plastic stand that holds it up at readable angle. Has a C/F switch on back.

Only minor negative is that while the upper range is advertized to be 450F, the documentation gives a slightly lower maximum temperature for the silicone cord. I'm writing this after using the product for a couple of months and I've lost the documentation, but my memory says the max cord temperature was listed as 425F.

(update 12/28/09)

Caution --Amazon has pulled a fast one. This TruTemp model may be fine, but I don't really know, because it's not the TruTemp model I wrote about in 2008. Amazon (without asking or informing me) has shifted my 2008 TruTemp review to this new model. This model has four front buttons like the old model, but the display, probe shape, and mount look different. The biggest change I see is that a feature I really liked is now gone: ability to measure freezer temperature. Bad, bad Amazon....

Click Here For Most Helpful Customer Reviews >>

I love this thermometer. I purchased it directly at the store after reading some reviews of others at high end retailer web sties. Those may have more features, but really, how many things are you going to cook at once. For the rest of us, there's this one for a great price. Since I've purchased it, I haven't overcooked a pork roast or turkey. You insert the probe into the meat and put the digital readout on the front of your oven. Set the temp you want, turn on the alarm and walk away. When the internal temp of the meat reaches your set point, an alarm sounds and your set. No more opening the oven, letting out all the heat and checking the temp, only to find you missed it and now your meat is overcooked.

Best Deals on Taylor TruTemp Digital Cooking Thermometer with Alarm

It seems that most people recommend Taylor digital probe thermometers for oven or smokers. I've used several of them and I'm not happy, primarily because the high end limit is 350 degrees.

This Tru Temp thermometer goes up to 450 degrees and works as well or better then the the Taylors in all other respects. It suffers from the same general problems as others in that the probes are fairly easily damaged. But for the money you simply can't beat it.

I use this thermometer for smoking meat. I like to put one probe in the open in the smoker to monitor smoker tempterature. The rest go into the meat. I've generally gotten about a year and a half out of the probes.

Another thing I like about the probes is they are straight. Most of the others, like Taylor, have a large curve in them and that curve gets in the way. The straight probe is preferable to me.

The read out is large and easy to read and the set points are easy to use. The alarm can be heard inside, which is perfect. The base has magnets built in so you can attach it to anything made or ferrous metal.

Be sure to store these indoors if you use them with you smoker or grill. Left outdoors the digits will begin to fail on the display. I learned this the hard way.

Honest reviews on Taylor TruTemp Digital Cooking Thermometer with Alarm

I have 5 of these units, and have given two away as gifts. The price is great, and it has a 1 second refresh rate for quick measurements, and I couldn't be happier with the product or vendor. I use them for other things, such as radiator temp, and my favorite is attaching a long stick to the probe to check how the compost pile is cooking. It only uses one battery that lasts many months, even though it's on all the time. One thing I did is seal the interface between the probe and silicone sheath with Silicone RTV caulk, normally used for caulking bathrooms, etc. That caulk has a working temperature of 450 F, so should hold up. I didn't want it to possibly get inside the probe and damage the sensor, so that's why the seal. It also measures in either F, or C, which is a nice feature. The high/low alarm is handy, and cooking caramel, or other candy is just more fun when you can easily see the temperature, rather than squinting at the numbers on a typical glass candy thermometer...that is usually coated with what you're cooking. Get one of these, and it'll be hard to go back to the other thermometers!

Find helpful customer reviews and review ratings for Taylor TruTemp Digital Cooking Thermometer with Alarm

This thing worked fine for about 6 months, I used it mainly for grilling steaks, pork and chicken. But once the cord starts to come loose from the probe it's time to chuck this piece of junk in the trash. I'm shopping for a wireless thermo now.

Buy Fom Amazon Now

Saturday, April 19, 2014

Reviews of Honeywell FC37A1064 Replacement Electronic Cell For 20-Inch

Honeywell FC37A1064 Replacement Electronic Cell For 20-Inch by 25-Inch Air
Customer Ratings: 5 stars
List Price: $456.63
Sale Price: $202.42
Today's Bonus: 56% Off
Buy Now

This is an exact replacement, as you would expect. What I didn't expect was how bad my old filters were. Now that I see the nice shiny new one I realize the olds ones must oxidize or get some kind of deposits on them even with regular cleaning. My air cleaner takes two of these and it didn't seem right to put the new shiny one in there with the other old one so I ordered a second one. Oh and luckily they package these pretty good as the box was partially crushed but the filter inside was ok.

Click Here For Most Helpful Customer Reviews >>

The Honeywell Electronic Cell is working well. My wife and I have used Honeywell Electronic Cell for over 15 years.

Best Deals on Honeywell FC37A1064 Replacement Electronic Cell For 20-Inch

My old filters were 14 yrs. old...Not working properly but the new ones were exactly what I needed...Really amazing the difference in appearance between the two. Great fit and work like they should.

Buy Fom Amazon Now

Thursday, February 20, 2014

Cheap 9620 Robertshaw DIGITAL THERMOSTAT

9620 Robertshaw DIGITAL THERMOSTAT
Customer Ratings: 3 stars
Buy Now
Works well and is fairly easy to figure out. Took about 7 minutes to program in the four time slots for all seven days. Can only set the times in 30 minute increments 15 minute would be nicer, but not a big deal. Overall, works great. I set it and now it changes the temp as I told it to and I don't have to think about it.

Click Here For Most Helpful Customer Reviews >>

purchase as a replacement for a thermostat that was broken. Thermostat was OK. Attachment screws & batteries looked used. Batteries lasted 1 week.

Best Deals on 9620 Robertshaw DIGITAL THERMOSTAT

My Robert Shaw is one of the worst gadgets ever created by man. Impossible to program, impossible to operate, and despite several calls for help to Shaw, none was forthcoming. I threw away $150 on a piece of garbage. I feel like taking a sledge to it.

Buy Fom Amazon Now

Monday, December 30, 2013

Best Avanti : WCR683DZD2 24 Freestanding Wine Cooler with Wooden Shelves Deals

Avanti : WCR683DZD2 24 Freestanding Wine Cooler with Wooden Shelves
Customer Ratings: 3 stars
Buy Now
When I first received this wine cooler it worked great. Loved the layout and the dual controls. But after a couple years in service the compressor went out. Fortunately we had an extended warranty that covered the costs. About 1/2 a year later the cooler was down again. This time the warranty was up and the parts were on backorder. The cooler was down about 45 days before we received the parts (Which were very expensive). That brings us up to now and the cooler is down again, only this time the parts will be 2-3 months. My feeling is that a company is only as good as its service and Avanti gets and F. They do not returns calls. The local repair shop--their "authorized service tech"--is at wits end trying to get the parts for us. Well, after reviewing the cost of the new parts, we finally decided that to repair it again would be too expensive...so it becomes junk!

Click Here For Most Helpful Customer Reviews >>

Shipped promptly and was set up inside the house. The unit has no rollers under it just leveling feet. The compressor and fan are fairly quiet when they come on. Shelves accommodate various size bottles including chardonnay, pinot noir and thick glass bottles. Did not have issues with the fit being so tight that it scraped the labels off. It is rare that I was able to get 10 bottles on a shelf, so capacity was really more like 130 bottles than 160. Overall great unit at a great price. I would recommend it.

Best Deals on Avanti : WCR683DZD2 24 Freestanding Wine Cooler with Wooden Shelves

The temperature does not remain constant, widely fluctuating as much as 7 degrees within minutes with no atmosphereic temperature change of any significance, and it will not remain at the same temperature range as its 683 counterpart right next to it that I purchased in 2010. Further, I called the Avanti service line to arrange a for a technician to examine the unit under the warranty. The company they contract with in St. Louis is called ServTech and the technician who was supposed to make the service call for them is Ed Springer. I arranged with Ed to come Saturday morning (April 13) at 9:30 A.M. I opened the main front door of the house around 9:10 or 9:15, thus leaving only the windowed storm door closed so he would know I was there, I saw his card stuck in the main door window. So the guy showed up long before 9:30, left his card, and took off. I never heard a knock and never got a call from him to tell me he was there. Wait, it gets worse. I called him 3 times on Saturday, told him that I knew he was there before 9:30, and to please call me back so he could come back and do the job. I never heard from him.

Buy Fom Amazon Now

Cheap ecobee EB-STAT-02 Smart Thermostat 4 Heat-2 Cool with Full Color

ecobee EB-STAT-02 Smart Thermostat 4 Heat-2 Cool with Full Color Touch Screen
Customer Ratings: 4.5 stars
List Price: $454.00
Sale Price: $245.30
Today's Bonus: 46% Off
Buy Now

After weeks of putting up with two flaky Nest Learning Thermostat 2nd Generation T200577 units, I gave up on Nest and decided to give this a shot. So far, it's been pretty decent.

Since the two are similarly-priced, and there are lots of reviews about each model, I'll offer a comparison.

INSTALLATION:

Without question, this is harder to install than a Nest. In saying that though, some people are going to find the installation much easier than others.

First, the ecobee has a relatively large panel that needs to go "somewhere" between your furnace and thermostat. For my setup, my furnace and thermostat share different sides of the same wall. So, wiring could have been as simple as cutting the thermostat line somewhere in the middle, wiring up R/W/G/Y in the panel, and using the remaining wire to do +/-/I/O to the thermostat.

The tricky part is getting power to the panel. I decided I was going to run a common wire, and after changing out the physical wire, I realized that I didn't know as much about 24V as I thought. Now, I *could* learn some more about HVAC wiring, or I *could* check and see if I have a 12V wall wort type of transformer.

Sure enough, I had a 12V transformer from an old Linksys router, and my power problem was easily solved. Then I connected my humidifier to the first ACC terminals, and I was set.

The Nest, on the other hand, required no wire cutting, and draws power from the existing wiring. However, it's notoriously unstable. Om my particular system, it would complain about improper wiring for ten minutes or more, if the power had been cut. Others have reported the battery slowly discharging. Easy to install, not so easy to maintain.

INTELLIGENCE

The Nest tries to learn when you come and go, and when you adjust the thermostat, and creates schedules accordingly. In my experience, it creates them totally wrong -not noticing for hours when the house is empty, arbitrarily turning on the heat to a temperature it had never been set to, allowing a wide variance on either side of the temperature you set it at.

The ecobee, on the other hand, tries to learn how your house and furnace work. It isn't going to learn that you like it to be 73 when you first wake up, but it is going to learn how long it takes to make sure your house is 73 when you tell it you wake up.

CONNECTIVITY

Both Nest and ecobee offer a web interface. Nest is bright, clear, and easy to use. It's like using Apple's iCloud service. On the other hand, ecobee is full of options that aren't necessarily clear to laypeople, was designed for someone data-driven, and is as inviting as reconfiguring your home router for fun.

On the IOS / Android side, Nest presents a smaller (though fully-functional) version of their web interface. Brilliantly, ecobee did just the opposite. Their mobile application presents an interface that looks just like your thermostat's interface. Very, very smart.

DATA

Nest shows you a cute daily bar that represents 24 hours in a day. When there's a red slash, the furnace was on. Blue for A/C. Some days, you'll get an arbitrary leaf.

Fire up Microsoft Excel 2010 if you want to get granular with the ecobee, because every five minutes, it logs:

*Date

*Time

*System Setting (heat / cool / off)

*System Mode (compressor, heating stage, etc.)

*Calendar Event

*Program Name

*Cool Set Temp

*Heat Set Temp

*Actual Temp (accurate within 1/10 degree)

*Humidity Set Point

*Actual Humidity

*Outdoor Temp

*Wind Speed

*Cool Stage1 (seconds)

*Heat Stage1 (seconds)

*Fan (seconds)

*Humidifier (seconds)

*DM Offset

So, you wind up with something that looks like this:

Date Time System Setting System Mode Calendar Event Program Mode Cool Set Temp (F) Heat Set Temp (F) Current Temp (F) Humidity Set Point (%RH) Current Humidity (%RH) Outdoor Temp (F) Wind Speed (km/h) Cool Stage 1 (sec) Heat Stage 1 (sec) Fan (sec) Humidifier (sec) DM Offset

12/3/2012 0:00:00 cool compressorCoolOff Kevin Up 72 68 71.8 0 49 45 0 0 0 120 0

12/3/2012 0:05:00 cool compressorCoolOff Kevin Up 72 68 71.9 0 50 45 0 0 0 0 0

12/3/2012 0:10:00 cool compressorCoolOff Kevin Up 72 68 71.9 0 49 45 0 0 0 270 0

12/3/2012 0:15:00 cool compressorCoolOff Kevin Up 72 68 71.8 0 50 45 0 0 0 180 0

It's exportable as a CSV, or if you want to scour your info from ecobee's page, it looks like they've got some RRDTool implementation running.

CONSTRUCTION QUALITY

The Nest is the one that's going to impress. It feels substantial, it looks beautiful, and any monkey can use it.

This thermostat is the one that makes people say "...but it has a great personality, and really nice hair". The interface looks and feels about a decade old, the touchscreen is more than a little temperamental about registering taps, and the unit itself ls flimsy plastic to Nest's steel and glass.

VERDICT

I'm reserving some judgement to see how my next bill looks. The Nest actually increased my electric bill, and kept my gas bill at the same usage as my previous furnace, which was rated at 15% lower AFUE. Like the Nest, and its eight updates, I plan to update this.

If you put a gun to my head, I'd say the ecobee is the more serious thermostat. So far, I'd buy it again.

UPDATE: 02/26/13

I noticed a request or two for an update, so here goes...

Now that I've had the Ecobee for a while, my gas usage is down 30% year-over-year. Part of that is a more efficient furnace from last year. But when comparing to the Nest I had, my gas usage went down in spite of the weather getting colder. So the actual Ecobee-vs-Nest savings is fairly substantial.

What I like the most, though, is that the Ecobee lets you get very granular. Want the fan to operate for 15 minutes out of every hour? No problem. Want to set up different temperatures every half hour? Done. Need the humidifier to operate independently of the heat? Just connect the wires to the brain board.

So in addition to saving gas, I'm also able to circulate the air -keeping the temperature even throughout the house, and filtering it -and make a nighttime schedule that drops from 72 to 65 so gently, you'd hardly notice. There's something psychological about hearing the air circulate, I guess.

As far as intelligence and reporting, there's so much, it's probably easier to type out what's on the HomeIQ page:

First, you get the crazy metrics I pointed out above, presented in a graph.

Then, another runtime report that charts how long your HVAC system ran, and another tab that adjusts the runtime to external temperature.

And then... insights (and I'm typing these out as they appear):

Your Ecobee saved you 4%

Your Ecobee rating: **** / ***** (This is a calculation of how your house retains heat)

Your system ran 7% less than the average for your state / province

In January, your heating ran for 124 hours. This was 43 hours more than the previous month.

Your performance is influenced by a number of factors:

1) Weather -In January, your average weather was 27.1 degrees Fahrenheit. This was 5.7 degrees colder than the previous month.

2) Weekly Schedule -In January, your average heat setpoint was 70.2 degrees Fahrenheit. This was 0.3 degrees warmer than the previous month.

It's all displayed as infographics, and looks really sharp. Compared to "You got a leaf for today", Nest really can't hold a candle to it.

All things considered, this is the thermostat for any true geek who wants to build an insanely custom HVAC system, or for someone who enjoys never having to check the thermostat, because the temperature is so well-balanced after investing some programming time. I'd absolutely buy this again.

Click Here For Most Helpful Customer Reviews >>

Synopsis:

Yes, this is a pricey thermostat there is no disputing that but, this isn't a clunky time clock that just adjusts the temperature set point a few times a day either. Plain and simple, it's a computer to monitor and control your home environment and it does this very well.

Prior to purchase...

The Ecobee website (ecobee.com) has links to download the installation and operating manuals and is well worth a look prior to purchasing the unit. There are no fewer than a dozen different wiring diagrams for various single or multi-stage configurations including heat pumps.

My situation:

I purchased the EB-STAT-02 for my vacation home. I may use the home on the weekend, a couple of weeks in a row or, I may not visit for a month. A traditional "time clock" thermostat just doesn't fill the need I may as well just have a conventional thermostat and deal with waiting for the system to adjust when I arrive.

Complicating my irregular visitation and use of the house, I have a somewhat unique 2 stage heating / 1 stage cooling system. Not that it's all that "unique", it's just not typical. I have a hydronic radiant floor heating system as stage 1 that is augmented by electric forced air as stage 2. Cooling is via a single stage forced air system. A radiant floor heating system is very slow to react to significant temperature changes. What this means is that if I just drop in unplanned for a winter weekend, the weekend may be over before the stage 1 temperature to comes up to its set point. The ability to adjust the settings remotely is *huge* for me. (I know, I know radiant floor heating for a vacation home?? It's a future retirement home too!)

The installation:

Given the fact that there is no industry color standard for control wiring for residential heating and air conditioning, the installation for my system was likely more difficult than most will ever experience. Did I mention that I also have sensors for the floor slab temperature and outdoor temperature adding 4 more wires into the mix? (I purchased the remote sensor module add-on for up to 4 external sensors.) This is where Ecobee's tech support comes in. Even though the Ecobee website is up front about urging you to find a contractor in your area to install your stat and the warranty contains the standard disclaimers to discourage DIY'ers, Ecobee's tech support was great. I communicated with them via email since I wasn't at the house and I was pre-planning. I emailed them diagrams of my previous stat wiring and what I thought was the correct new wiring, asking for opinions. They identified a jumper that I needed for proper staging. Email responses weren't instantaneous, it took a day or so but, if I was in a hurry, I would have called.

Setting the thermostat up for internet access (wireless!) was completely painless. Typing on the thermostat's on screen "keyboard" was a lot like sending email on a smart phone cumbersome to me but not too bad.

Operation:

My thermostat is all connected now and working fine. I still have to review and tweak the program settings to decide things such as what the temperature differences between stage 1 and 2 should be. There are numerous customizable settings in addition to the typical wake up / away / return / sleep time settings.

Internet Access!

After the initial installation and set-up, I seldom make any changes on the thermostat, I use my browser instead. I go right to my thermostat and monitor what the set point is and adjust it if I want to. I can review and download the temperature set point data, internal humidity and temperature readings and even have it email specific data to me such as temperature out of range and air handler filter change needed.

Smartphone Access too!

Although not as comprehensive as the web browser access, there is a free app for your Smartphone that you can use to make adjustments.

Summary:

All in all, I'm very pleased with the Ecobee thermostat, the only drawback (if you can call it that) is price. However, it's not at all fair to compare the price of this unit to a traditional thermostat because feature-wise, there is no comparison. It's like comparing a radio to the HDTV on either device at the end of the ballgame you'll know who won, but it's a very different experience getting there.

Best Deals on ecobee EB-STAT-02 Smart Thermostat 4 Heat-2 Cool with Full Color

Last fall I purchased two different "smart" thermostats to try out before we made a decision on which to use throughout our home. The ecobee was recommended by a local architect. We've used the thermostats for 5 months straight, and I think we will likely go with the other brand due to ease of installation and ease of use issues with the ecobee. That said, the ecobee is a good product.

Pros:

-Reliable. While occasionally the ecobee seems to spontaneously go offline and display its flapping wings logo (is it updating itself?), it always comes back online automatically and has never required a reset.

-Reasonably good looking

-Programming using the web-based interface is easy

-Does what it is supposed to do and is controllable remotely if you create an ecobee account and link the termostat

-Allows for direct control of variables like temperature differential (i.e., do you want it to turn on and off at +/1 degree from the set temperature or +/2, etc.)

Cons:

-Thermostat touch screen is a textbook example of bad user interface design -i.e., they opted for a slick looking slider instead of simple +/buttons. I do not have large fingers and I can almost never get the slider where I want it on the first try. It drives me nuts that the hardest thing to do on this user interface is set the temperature.

-The iPhone app is very limited and similarly frustrating. For example you can do a temporary override to any temperature but you cannot change the duration of the hold (it defaults to 4 hours). Or you can enter "quicksave" mode which indefinitely lowers the temperature by a preset amount (default is 4 degrees), but you cannot change the amount of the temperature change from the app. For most other functions you need to log in to the website to control remotely or program.

-Install requires someone reasonably knowledgeable about his or her HVAC system or else professional installation

-Because it requires installation of two boxes (interface module connects to heating and cooling systems while the thermostat connects to interface module) it might require a significant run of new wire unless the heating and cooling system controls are in the same location. For most people with forced air systems this is not an issue, but could be when combining AC with steam or hot water baseboard systems.

Honest reviews on ecobee EB-STAT-02 Smart Thermostat 4 Heat-2 Cool with Full Color

My wife and I recently purchased a new heat pump unit and wanted to upgrade to a programmable thermostat. We actually saved up too much money for the heat pump unit and had some extra money to spend. After looking at all the fancy, touch-screen programmable thermostats, I settled on this one. Yeah, sure, it's pretty pricey, but I think it's worth it.

Installation was pretty simple. I am no HVAC technician, but I was able to figure out the colored wires from the old thermostat and match them with this one. My setup is pretty simple, electric heat pump with heating and cooling modes, and the auxiliary electric heat, but there are plenty more pins for more complicated equipment setups. For those kinds of setups, I would definitely recommend hiring a real technician. One thing I liked about this unit's installation was the two-piece setup. The touchscreen part mounts wherever your thermostat is traditionally mounted. Then there is another control board that mounts out-of-sight. Fortunately, my thermostat was mounted on the outside wall of a utility closet, so this gave plenty of room to install the control board inside the closet. If you don't have the option to mount inside a closet of sorts, the control board is in a nice, clean enclosure with some LED status lights.

As for using the thermostat, it's a breeze. You can do the heating and cooling temperatures right on the home screen. It's also nice that it has a weather display of the current conditions, and you can even dig deeper into the forecast. The installation wizard was simple (for my basic system), and everything feels pretty intuitive. I would recommend using the Ecobee.com web site to do the actual time-of-day programming. There are 4 modes: awake, away, home, and night. You assign temperature ranges to each of those modes. Then you assign those modes to 30-minute chunks of each day for the week.

The only problem that I have with this thermostat is that I can never seem to get it to report the correct temperature. I've been monitoring the temperature reported by the thermostat alongside another couple of digital thermometers, and the thermostat always seems to be off by 1-2 degrees. There is a setting in the thermostat that allows you to adjust the displayed temperature by a few degrees in half-degree increments. However, I always seem to overshoot it or undershoot it, but I'm not sure how. It seems like it may be overcompensating somehow? It's either that, or it only takes temperature readings every 15-30 minutes. I'm not sure which.

I almost forgot to mention that there is an iPhone app for controlling the thermostat remotely. It's a little buggy and could maybe do with a little more "polish", but it gets the job done. The bugginess is that it seems to have issues authenticating you or connecting to the thermostat every now and then. It's intermittent, so waiting a couple of minutes may clear the issue up. Also, if you adjust the thermostat heating and cooling sliders, it may take a while for it to actually take effect on the thermostat itself. The trick is to wait for the mode icon to change to the resume icon to know that your settings were saved. If you exit out of the app without waiting for this confirmation, it will never save. Besides the couple of minor flaws, it's nice to be able to put the thermostat into "save" mode if you're out of the house and forgot to set it before you left.

There are a couple of other features like vacation mode that I haven't used yet. In all, after doing many hours of research, this is the only internet-enabled touchscreen thermostat that I would buy. In my opinion, it is the best one on the market (as of the time of this review).

Find helpful customer reviews and review ratings for ecobee EB-STAT-02 Smart Thermostat 4 Heat-2 Cool with Full Color

Update: I wrote the below review in mid 2011. I have had a year of use with the ecobee and still believe it is an excellent product. I have however found some minor shortcomings and am also reviewing some other home automation products.

In hindsight I may have considered another option for a thermostat that could be accessed via a larger home automation scheme. If all you need is a good thermostat to access remotely this is a very good solution. If you are like me however and want to expand on the concept the ecobee is limited.

My first update indicated that the ecobee lacks Home Automation capability. In fact it can be extended to Zigbee module. I have not net investigated this capability so I do not know how it compares to other Zigbee or Z-Wave products.

Original review:

I purchased the ecobee thermostat to remotely control the HVAC for our vacation property. We don't always know when we will be there, and it is also nice to be able to adjust the temperature after I've driven off and forgotten to do it.

The Ecobee is a fully Programmable Thermostat that lets you operate it remotely over the internet. The unit does require a WIFI connection so that it can connect to the Internet. Remote access is actually done via Ecobee's servers and website. After the unit is configured for your WIFI Router it then starts communicating with Ecobee directly. You will set up an account with an Email Address and Password via the Thermostat. Once done you can now log on to Ecobee.com and access your unit. You can also do this with an Application on your smartphone (IPhone?) but with more limited capabilities. Very cool!

I installed the unit myself but I'm not sure I would advise this as a DIY project unless you have some knowledge of HVAC wiring and controls. The vast majority of us do not. I have a Heat Pump and failed to initially configure the Ecobee for this, so I was struggling to understand why I had no cooling. I was having discomforting thoughts of having to call a Technician to bail me out before I baked to death in my Condo. Alas I figured it out.

Traditional thermostats control your Furnace and Air Conditioning over only a few wires. In older homes that have thermostat wire with 5 or fewer strands this can present real limitations, especially for newer Two Stage Furnaces or Dual Compressor Cooling Units. Add to that Heat Pumps, Auxilary Electric heating, Dehumidification, or Humidification features, and there is no way to do this with only a few wires. Enter the concept of an Equipment Interface Module. Basically this is a separate control unit that is mounted directly to your Furnace/Air Handler and can be wired directly with a much larger selection of options. The thermostat no longer controls your Furnace directly but communicates digitally to the Equipment Interface Module using only the few wires you have in your wall. Many modern high end HVAC units now work this way. The Ecobee functions just this way.

Installation.

Ideally you would just mount the Module to the side of your Furnace or Air Handler. In my case it was a very tight fit to be able to service it so I purchased some 6 inch 'L' brackets from the hardware store and mounted it that way. Next I had to wire it. I searched locally for some thermostat wire to connect the module to my Furnace but no one had anything with more than 5 strands. I ended up driving further than I would have liked and found some 7 strand. I then disconnected the existing thermostat wire from my furnace and tried to connect it to the Module. This would be my communication wire. Too short! I had to splice in an piece to make it reach. Next I installed the new piece of 7 strand wire between the Module and my furnace. Finally I installed a piece of 2 strand wire from the 24VAC supply inside the furnace to power the Ecobee Module, otherwise you will need to buy an AC Adapter. From there it was just turning the breaker switch back on and getting things configured.

Programming is best done from a web browser and internet connection. Use the mouse to drag the 7 day calendar, then select the mode Icon (Sleep, Awake, Away, etc.). Then select the Edit Icon to adjust the mode temperatures. Once you have figured out how this works it is a breeze. I was surprised also with how easily it connected to the internet and became accessible to me. It seems very well sorted out from that standpoint. I don't feel at all like a new adopter guinea pig. By comparison it took me hours recently just to get my E3000 Cisco WIFI router working, a technology that should now be very mature. The Ecobee is without a doubt one of the coolest gadgets I have purchased in a long time. The fact that I can actually see what the temperature is in my Condo and adjust it with a finger drag on my Iphone is really futuristic stuff.

Buy Fom Amazon Now

Tuesday, December 10, 2013

Toastmaster TSM2032T Sandwich Maker Reviews

Toastmaster TSM2032T Sandwich Maker
Customer Ratings: 3.5 stars
Buy Now
I had one of the originals...with the vaneer look. --Ugly yes, but it was actually very sturdy & well made. Unfortunately, it got lost in a move.

Then I purchased the newer one. It just wasn't as good of quality & the latch section cracked on me on the fourth or fifth use! Garbage!

Pay more $ on a Cuisenart or Delongi...you'll be happier.

Click Here For Most Helpful Customer Reviews >>

This is a nice little sandwich maker. It's compartments are pretty small. You have to cut the crust off of your bread and cut it diagonally in order to fit the sandwich in the compartment. Also, you need to keep an eye on it, because the indicator light isn't realiable to let you know when the sandwich is done. I've had a couple of too cruchy edges on my sandwiches because of this. Otherwise, it makes a great sandwich! For the money it really is a pretty nice machine.

Best Deals on Toastmaster TSM2032T Sandwich Maker

It does the job for the price. Smashes the bread too thin, makes the edges too hard. I use it in my office for quick lunches, but would not purchase another.

Honest reviews on Toastmaster TSM2032T Sandwich Maker

I've got a family of 5, and all three of my kids, as well as my husband and I, LOVED the sandwiches I just made! We just made ham and swiss sandwiches, and it was SO easy and even my picky little eaters ate every bite! There might be a better sandwich maker out there, but NOT for $10!!

Find helpful customer reviews and review ratings for Toastmaster TSM2032T Sandwich Maker

I have been using this tool for 2 months almost daily now, and it still works fine.

Update 2 years later.

As of October 2007 the toaster still works OK

Update 3 years later.

September 2008. Still works fine

Buy Fom Amazon Now