Click Here For Most Helpful Customer Reviews >>
This product seems to work fine and looks good. It just seems very expensive considering other models I have considered. The biggest selling point for me was the size. It was the only one that fit the undercounter space I had. So, for that, I am grateful.
Showing posts with label non programmable thermostat. Show all posts
Showing posts with label non programmable thermostat. Show all posts
Monday, January 26, 2015
Reviews of Danby DWC276BLS 27-Bottle Silhouette Wine Cellar - Black/Stainless
We had removed an old trash compactor from the original owner of our house and needed to fill this odd 12" opening in our cabinet. This wine cooler was perfect. Brainless to install, and runs great. Only complaint is that it's a bit noisy...
Sunday, January 18, 2015
Best ChiliPad Bed Temperature Control Mattress Cover Deals
I have owned my Chilipad for 4 years, and can honestly say I cannot sleep without it. Night sweats and hot flashes are nearly impossible, but with this I sleep like a teenager. There are a few things I would change if I were the designer, however. The pad itself consists of a cotton pad in which there are silicone tubes thru which the water circulates (you really can't feel them when you are lying on it, however). This pad slips into a zippered cover that is just like a regular pocketed mattress pad. However, there is no way to adhere the inner pad to the outer pad. Now this may not be a problem for most people, but I have to sleep with the head of the bed elevated, and I have to unzip the outer pad and reposition/smooth out the inner pad about every 3-4 days. They do not recommend using sharp things on the pad, so no pins, no sewing on velcro, etc.
The fan can be noisy, so if you need absolute quiet to sleep, this may not be the solution for you. But I found that soft music drowns it out completely.
You will need to top off the water about once a week or so, but it's really easy to do. You just need to have it somewhere accessible.
I also recommend setting it on a hard surface it seems to work better I use a cookie sheet under my bed just in case it develops a leak or I get sloppy when topping it off.
Customer service at Chili Technology is top notch they will bend over backwards and stand on their heads to make sure you are satisfied. My unit developed a leak, I called them, and had a new unit within 3 days, and they paid for the return shipping on the leaky unit as well.
There is a rumor that they are developing one for chairs, and I can't wait. Wish there was one for a desk chair too.
Although I am single, imagine being able to have your side of the bed cool and your partner's side warm no more arguments about room temperature, and you will save a lot on heating and AC.
Overall, wonderful product, highly recommend it, I love it.
In the summertime, if your bedroom is uncomfortably hot, this device will probably help cool your bedding, but not to such a degree where you can turn off your air conditioning.
Let's say it's 30c and you'd like it to be 20c under the covers. This modestly powered device won't be able to close such a gap in temperature, as it's working against the ambient temperature of your room as well as your own body heat. It may be able to lower the temperature of the water 7c, but it could take several *hours* before a noticeable cooling effect can be felt. Remember, it not only has to cool the water flowing thru the tubes, but also the surrounding bedding, and eventually your body.
In short, this device will not replace your air conditioning if your room is too hot.
But even if the device could dramatically cool your bedding, this wouldn't be practical. Such a difference in temperature would create a large amount of condensation. In fact, condensation is already a problem when lowering the temperature by ~7c. On the hottest nights, I'll have damp bedding in the morning.
My conclusion, after using this product for an entire summer, is that the Chilipad works best in a room that is slightly too hot, but not extremely hot. You may have to use the AC to reach this ideal temperature, which may lead you to feel that this device is pointless. It probably is pointless for some people in some environments, but clearly, some find it greatly beneficial to their quality of sleep.
Another problem to consider is the noise of the device when operating at its maximum power. It produces white noise that is a bit louder than a room fan, as well as some gurgling water noises. If you are sensitive to noise, you'll definitely want to wear earplugs, but even then, you'll still hear it.
I use the Chilipad during the winter months to keep my bed toasty warm. In the autumn and spring the device works well to keep my bed at a reasonable temperature. But during the hot summer months when just about everyone sleeps with the AC on, this device simply cannot beat the heat on its own.
UPDATE Sept 2013:
Unfortunately, I constantly found myself going to bed too hot, and waking up too cold. I could never find a comfortable temperature setting with the Chilipad and the whole ordeal became detrimental to my sleep. As such, I didn't use it for the entire summer for 2013.
I've grown to realize that the product is made for a room that already has a comfortable ambient temperature. The unit simply regulates the temperature of the bottom bedding, preventing things like sweating into the mattress at night. But as I said before, if your room is too hot to begin with, the Chilipad isn't going to help much.
I still plan to use the Chilipad all winter long like last year. It's really quite suited for that.
Edited August 6, 2012 almost 8 months after purchase
Still loving it. Use it every night.
The fan can be noisy, so if you need absolute quiet to sleep, this may not be the solution for you. But I found that soft music drowns it out completely.
You will need to top off the water about once a week or so, but it's really easy to do. You just need to have it somewhere accessible.
I also recommend setting it on a hard surface it seems to work better I use a cookie sheet under my bed just in case it develops a leak or I get sloppy when topping it off.
Customer service at Chili Technology is top notch they will bend over backwards and stand on their heads to make sure you are satisfied. My unit developed a leak, I called them, and had a new unit within 3 days, and they paid for the return shipping on the leaky unit as well.
There is a rumor that they are developing one for chairs, and I can't wait. Wish there was one for a desk chair too.
Although I am single, imagine being able to have your side of the bed cool and your partner's side warm no more arguments about room temperature, and you will save a lot on heating and AC.
Overall, wonderful product, highly recommend it, I love it.
Click Here For Most Helpful Customer Reviews >>
This product can cool or heat your bed. For heating, this device works well, so I will not talk about that feature any further. For cooling, this device may not work as well as you would like it to. Let me explain:In the summertime, if your bedroom is uncomfortably hot, this device will probably help cool your bedding, but not to such a degree where you can turn off your air conditioning.
Let's say it's 30c and you'd like it to be 20c under the covers. This modestly powered device won't be able to close such a gap in temperature, as it's working against the ambient temperature of your room as well as your own body heat. It may be able to lower the temperature of the water 7c, but it could take several *hours* before a noticeable cooling effect can be felt. Remember, it not only has to cool the water flowing thru the tubes, but also the surrounding bedding, and eventually your body.
In short, this device will not replace your air conditioning if your room is too hot.
But even if the device could dramatically cool your bedding, this wouldn't be practical. Such a difference in temperature would create a large amount of condensation. In fact, condensation is already a problem when lowering the temperature by ~7c. On the hottest nights, I'll have damp bedding in the morning.
My conclusion, after using this product for an entire summer, is that the Chilipad works best in a room that is slightly too hot, but not extremely hot. You may have to use the AC to reach this ideal temperature, which may lead you to feel that this device is pointless. It probably is pointless for some people in some environments, but clearly, some find it greatly beneficial to their quality of sleep.
Another problem to consider is the noise of the device when operating at its maximum power. It produces white noise that is a bit louder than a room fan, as well as some gurgling water noises. If you are sensitive to noise, you'll definitely want to wear earplugs, but even then, you'll still hear it.
I use the Chilipad during the winter months to keep my bed toasty warm. In the autumn and spring the device works well to keep my bed at a reasonable temperature. But during the hot summer months when just about everyone sleeps with the AC on, this device simply cannot beat the heat on its own.
UPDATE Sept 2013:
Unfortunately, I constantly found myself going to bed too hot, and waking up too cold. I could never find a comfortable temperature setting with the Chilipad and the whole ordeal became detrimental to my sleep. As such, I didn't use it for the entire summer for 2013.
I've grown to realize that the product is made for a room that already has a comfortable ambient temperature. The unit simply regulates the temperature of the bottom bedding, preventing things like sweating into the mattress at night. But as I said before, if your room is too hot to begin with, the Chilipad isn't going to help much.
I still plan to use the Chilipad all winter long like last year. It's really quite suited for that.
Best Deals on ChiliPad Bed Temperature Control Mattress Cover
Just got one of these, and after two nights I think it is great. I have a latex foam mattress, and my only complaint has been that it is hot. The Chilipad fixed that issue. Good customer support too needed for someone who does a poor job of reading the manual.Edited August 6, 2012 almost 8 months after purchase
Still loving it. Use it every night.
Honest reviews on ChiliPad Bed Temperature Control Mattress Cover
I can't believe the difference this has made for sleeping, while it was a bit expensive, it was worth every penny!Find helpful customer reviews and review ratings for ChiliPad Bed Temperature Control Mattress Cover
Just got one of these, and after two nights I think it is great. I have a latex foam mattress, and my only complaint has been that it is hot. The Chilipad fixed that issue. Good customer support too needed for someone who does a poor job of reading the manual.Monday, January 12, 2015
Best White-Rodgers 1F78-151 Digital 5/2 Day Programmable Thermostat Deals
I own two of these thermostats. One was a new installation for a new furnace, and the other was a recent replacement for another programmable brand.
I find this product to be a great value considering its functionality. It is programmable separately for heating and cooling systems, which is always a nice option (some brands/models are "one season at a time" so you have to constantly reprogram every season).
The 1F78 can be programmed for four programs for each weekday, as well as for programs for weekends. This is your basic 5/2 programming.
This model DOES NOT let you program for individual days, so if that is an option you want, skip the 1F78. For example, you can program for Mon-Fri, and Sat/Sun, but not Monday independently. I've had that feature on other thermostats and it is nice if you like to maybe let the heat stay on later on a Saturday night compared to Sunday, for example. However, for the price that was a small sacrafice to me, given the other features and ease of use.
I do like the EMR (Energy Management Recovery) feature on this thermostat. It "calculates", based on current temperature and desired temp/time when it should come on. For example, it you want it to be 70 degrees at 7 AM, you don't need to guess how early to start the thermostat in order to call for heat and reach 70 by 7 AM. You just set it for 7 AM, and what it does is come on about 5 minutes earlier for each heating degree it is below your set temperature. For cooling, EMR will turn on you A/C 15 minutes early for each degree above your set point.
You can disable the EMR feature if you prefer.
What's in the box:
The 1F78 thermostat
Instruction manual
Two mounting screws
Two screw anchors
Two AAA batteries (mine were Duracell, obviously this could change depending on manufacturer shipping).
Set up is simple. TURN OFF ELECTRICTY to your HVAC, which should cut power to your old thermostat (except for any batteries in it). Remove your old thermostat, taking note of the wiring colors in use. Tape/tie off your wiring cable so it does not fall into the wall!! Run the wires through the back of the 1F78 and connect to the appropriate terminals.
Display is basic LCD gray on gray, backlit in amber when you press a key. The display is easy to read.
Controls are simple to understand, and you are used to programmable thermostats, timers, etc. you may not even need the manual to program this product. The buttons are basic Time, Program, Run, Hold, and Fan (On/Auto) and System (Cool/Off/Heat).
I have one complaint about this product, and its not a huge deal and you should only need to deal with it once the wiring terminals. The terminals themselves are screw-down, which is nice since you don't have to wrap the wire on a terminal. But there is very little room in between the terminals, so it can be a pain to work the wires into each terminal to tighten them down.
Overall, this is a reliable thermostat. I've had no issues with my first, which is about four years old, and the newly installed one took about 20 minutes to install. I would purchase this product again.
Also If you want you can program and set your thermostat to change the temperature during a certain time and day of the week.
Gary
They all do their job, except for one that occasionally resets to default factory settings for no apparent reason even after changing the batteries several times.
The problem is when they go from cool down to heat, they do not register the actual temperature on a timely basis. (i.e. Going from 52 to 68deg. it keeps heating and actual temp measured is 76-78 deg and still the thermostat says is much lower and calling for heat) SEVERAL minutes later, it will read the actual temperature.
This seems to be an issue with White Rogers as one was installed in a rental a similar but non programmable model (this brand seem to be favored by installers maybe the cheapest?). The residents had complained of this issue when manually raising and lowering the settings, or when the door was opened and cold came in. I swapped it out with a Honeywell that registers actual temperature with quick response!
I find this product to be a great value considering its functionality. It is programmable separately for heating and cooling systems, which is always a nice option (some brands/models are "one season at a time" so you have to constantly reprogram every season).
The 1F78 can be programmed for four programs for each weekday, as well as for programs for weekends. This is your basic 5/2 programming.
This model DOES NOT let you program for individual days, so if that is an option you want, skip the 1F78. For example, you can program for Mon-Fri, and Sat/Sun, but not Monday independently. I've had that feature on other thermostats and it is nice if you like to maybe let the heat stay on later on a Saturday night compared to Sunday, for example. However, for the price that was a small sacrafice to me, given the other features and ease of use.
I do like the EMR (Energy Management Recovery) feature on this thermostat. It "calculates", based on current temperature and desired temp/time when it should come on. For example, it you want it to be 70 degrees at 7 AM, you don't need to guess how early to start the thermostat in order to call for heat and reach 70 by 7 AM. You just set it for 7 AM, and what it does is come on about 5 minutes earlier for each heating degree it is below your set temperature. For cooling, EMR will turn on you A/C 15 minutes early for each degree above your set point.
You can disable the EMR feature if you prefer.
What's in the box:
The 1F78 thermostat
Instruction manual
Two mounting screws
Two screw anchors
Two AAA batteries (mine were Duracell, obviously this could change depending on manufacturer shipping).
Set up is simple. TURN OFF ELECTRICTY to your HVAC, which should cut power to your old thermostat (except for any batteries in it). Remove your old thermostat, taking note of the wiring colors in use. Tape/tie off your wiring cable so it does not fall into the wall!! Run the wires through the back of the 1F78 and connect to the appropriate terminals.
Display is basic LCD gray on gray, backlit in amber when you press a key. The display is easy to read.
Controls are simple to understand, and you are used to programmable thermostats, timers, etc. you may not even need the manual to program this product. The buttons are basic Time, Program, Run, Hold, and Fan (On/Auto) and System (Cool/Off/Heat).
I have one complaint about this product, and its not a huge deal and you should only need to deal with it once the wiring terminals. The terminals themselves are screw-down, which is nice since you don't have to wrap the wire on a terminal. But there is very little room in between the terminals, so it can be a pain to work the wires into each terminal to tighten them down.
Overall, this is a reliable thermostat. I've had no issues with my first, which is about four years old, and the newly installed one took about 20 minutes to install. I would purchase this product again.
Click Here For Most Helpful Customer Reviews >>
I just hate when a thermostat is so Hi-tech that its all complicated... for me this works just fine, use the up or down button to set the temperature you desire and then press the "hold" button and you're done.Also If you want you can program and set your thermostat to change the temperature during a certain time and day of the week.
Best Deals on White-Rodgers 1F78-151 Digital 5/2 Day Programmable Thermostat
I replaced two earlier versions of this thermostat in my house. The new one is smaller, so I had to do a little painting, but no big deal. Also, it was a little difficult to feed the wires in and get them cinched down due to the tight space. But otherwise I love it. It is EXTREMELY easy to use (makes my wife happy!) and a good price. Recommended.Gary
Honest reviews on White-Rodgers 1F78-151 Digital 5/2 Day Programmable Thermostat
These were installed by the HVAC installer we have 4 installed in the building for various heaters and furnaces. They are programmed to lower temps while no one is working, and raising it before work starts.They all do their job, except for one that occasionally resets to default factory settings for no apparent reason even after changing the batteries several times.
The problem is when they go from cool down to heat, they do not register the actual temperature on a timely basis. (i.e. Going from 52 to 68deg. it keeps heating and actual temp measured is 76-78 deg and still the thermostat says is much lower and calling for heat) SEVERAL minutes later, it will read the actual temperature.
This seems to be an issue with White Rogers as one was installed in a rental a similar but non programmable model (this brand seem to be favored by installers maybe the cheapest?). The residents had complained of this issue when manually raising and lowering the settings, or when the door was opened and cold came in. I swapped it out with a Honeywell that registers actual temperature with quick response!
Find helpful customer reviews and review ratings for White-Rodgers 1F78-151 Digital 5/2 Day Programmable Thermostat
Our old ones did not work any more. Because we do not know much about these kind of controller, so we got this one which is the same model as our old ones. It is ok, but the new interior design makes it hard to install than before. I do not understand why the screws are so tight that I cannot even loose it to put connecting wire in!Sunday, August 31, 2014
Reviews of Soleus Air HM1-10-32 Ultra Thin Micathermic Heater, Black
Customer Ratings: 
List Price: $64.99
Sale Price: $61.95
Today's Bonus: 5% Off

My Soleus HM1-10-32 is used to supplement my oil heat since prices have gone up. I have no problem heating a 18' x 12' living room. I wanted the non-remote version because I've got too many remotes and dont need another one. To my surprise this regular model is now coming with ECO (economy mode).
The heating element consists of two 500W vertical heat panels:
1) LOW: In this mode only one heat panel turns on (the right panel).
2) High: In this mode both (right and left) heat panels turn on.
3)ECO: In this mode both 500W heat panels turn on until the room reaches a certain temp then the right heat panel turns off and the left one remains on until the thermostat takes over and cycles one 500W panel.
Noise: The 500W heat panels will warp at little as they warm-up. This warping makes a low clunk sound. Not loud enough to disturb you but noticable. Also the thermostat makes a click as it cycles.
Power: 1000W seems to be enough for me and doesnt cause heating of the line cord. At this power level the unit can share another device on the same line if need be. The 500W setting works well for most of my conditions. For instance I get home from work and the burner has kept the house at 63 degrees F. I turn-on the heater at 1000W until the living room wall thermostat reads 69 F then I turn the heater to low and let it cycle.
Heat: Since it has a back or rear to the element I tried it up against a wall. This heated the wall up real well. After moving it out in the open it seemed much more effective. The heater emits a LOT of heat out of the top and heats only about out to three feet from the front. I also heats out to 1.5 feet to the rear. Other than that its mostly Infra-red waves to the front and rear and ambient heat to the top.
Very handy carry handle on one side and attractive thin profile make this a real versatile low profile heater. With the Micathermic elements the heating elements are not exposed to the air so it is safe.
I really think this is the future in portable heating because it is the quietest heater I have used. Also with heat out of the top,infra red to the front and heat to the rear its very effective.
Edit: 2/6/07
Well we had our first single digit night here in NY and it kept the bedroom at 68F by using 1000W and letting it cycle all night. Thats 68F with my door open and attic air leaking thru the attic stairs (in otherwords worst case) at 8 deg outside temp. Normally on an 8 deg night my bedroom is 59F.
I also knocked it completely over while walking around in the dark. The Power was off and it lived no problem. No damage works fine.
Another point is that no matter how close it is to objects in the bedroom they do not heat to a dangerous temp. They will get warm but not hot.
When sitting on the coach with it 3 feet away and facing you (maximum comfy) you only feel a mild radiant heat not a blast in the face. Try that with most radiant heaters and you'll get a tan.
Lovin' it.
List Price: $64.99
Sale Price: $61.95
Today's Bonus: 5% Off
My Soleus HM1-10-32 is used to supplement my oil heat since prices have gone up. I have no problem heating a 18' x 12' living room. I wanted the non-remote version because I've got too many remotes and dont need another one. To my surprise this regular model is now coming with ECO (economy mode).
The heating element consists of two 500W vertical heat panels:
1) LOW: In this mode only one heat panel turns on (the right panel).
2) High: In this mode both (right and left) heat panels turn on.
3)ECO: In this mode both 500W heat panels turn on until the room reaches a certain temp then the right heat panel turns off and the left one remains on until the thermostat takes over and cycles one 500W panel.
Noise: The 500W heat panels will warp at little as they warm-up. This warping makes a low clunk sound. Not loud enough to disturb you but noticable. Also the thermostat makes a click as it cycles.
Power: 1000W seems to be enough for me and doesnt cause heating of the line cord. At this power level the unit can share another device on the same line if need be. The 500W setting works well for most of my conditions. For instance I get home from work and the burner has kept the house at 63 degrees F. I turn-on the heater at 1000W until the living room wall thermostat reads 69 F then I turn the heater to low and let it cycle.
Heat: Since it has a back or rear to the element I tried it up against a wall. This heated the wall up real well. After moving it out in the open it seemed much more effective. The heater emits a LOT of heat out of the top and heats only about out to three feet from the front. I also heats out to 1.5 feet to the rear. Other than that its mostly Infra-red waves to the front and rear and ambient heat to the top.
Very handy carry handle on one side and attractive thin profile make this a real versatile low profile heater. With the Micathermic elements the heating elements are not exposed to the air so it is safe.
I really think this is the future in portable heating because it is the quietest heater I have used. Also with heat out of the top,infra red to the front and heat to the rear its very effective.
Edit: 2/6/07
Well we had our first single digit night here in NY and it kept the bedroom at 68F by using 1000W and letting it cycle all night. Thats 68F with my door open and attic air leaking thru the attic stairs (in otherwords worst case) at 8 deg outside temp. Normally on an 8 deg night my bedroom is 59F.
I also knocked it completely over while walking around in the dark. The Power was off and it lived no problem. No damage works fine.
Another point is that no matter how close it is to objects in the bedroom they do not heat to a dangerous temp. They will get warm but not hot.
When sitting on the coach with it 3 feet away and facing you (maximum comfy) you only feel a mild radiant heat not a blast in the face. Try that with most radiant heaters and you'll get a tan.
Lovin' it.
Click Here For Most Helpful Customer Reviews >>
Does a good job heating a 10" x 12' bedroom. It's totally silent, so it's perfect for the bedroom. It does heat up almost instantly, but at only 1000 watts, does not heat up the room very quickly. Best to turn it on an hour before you turn in, to give it time to heat up the room. I'm using it in a house that I set to 58 degrees overnight, with single digit temperatures outside. The bedroom stays in the upper 60's for the night while this is on. Update: It stopped working after a couple of months. Got a new one that's been working fine all winter. The one year warranty was good, but the return experience was poor. Had to call many times over many days to get an actual person. The return involved cutting the end of the power cord and mailing at my expense back to them (good to not have to pay to send the entire unit back). Plus, had to send them money to cover shipment of the replacement unit (I think it was $16). All in all, it cost me over 40% of the original cost to get warranty replacement. It seems that this is becoming a common practice these days, but not easy to find out until you call for repair. So consider this a heads up so you can factor this in to your purchasing decision.Best Deals on Soleus Air HM1-10-32 Ultra Thin Micathermic Heater, Black
I bought this item online for $58 and it broke after a few days of very light use. The thermostat failed and the plastic knob broke. I don't recommend Soleus products. Their quality is very bad.Honest reviews on Soleus Air HM1-10-32 Ultra Thin Micathermic Heater, Black
This item does NOT promote enough heat even at a high setting. I recommend the DeLongi flat panel heater, as you can actually mount the heater, and it puts off a great deal to heat at a much lower setting, for about the same price of this unit...Find helpful customer reviews and review ratings for Soleus Air HM1-10-32 Ultra Thin Micathermic Heater, Black
This heater only worked for a total of about 60 hours. Apparently Soleusa Air makes their items VERY cheap.Wednesday, May 7, 2014
Reviews of Digital Electronic Egg Incubator Thermostat with Remote Sensor
I bought this thermostat for my incubator that I hatch chicken eggs in. The problem is this thermostat was 16 degrees off and it only lets you adjust it 5 degrees when you calibrate it. I can just falsely adjust the temp to way below 99.5 degrees (to 88.6 in this case) but when the power goes out it will reset itself and then the temps in the bator shoot up to 110 degrees!!! It's off/on cycle is also too far apart to be a great thermostat for incubating eggs. In other words it gets really cool before it clicks on and the on cycle warms up quite a few degrees before it shuts off again. I need something with a shorter (not delayed) on/off cycle.
I will be spending a little more on a much better thermostat.
Then it worked for a day and stopped working.
I opened it up to try to see if there was a fuse of something. I could see nothing wrong.
I will be spending a little more on a much better thermostat.
Click Here For Most Helpful Customer Reviews >>
This temperature controller was a little tricky to hook up and figure out the wiring.Then it worked for a day and stopped working.
I opened it up to try to see if there was a fuse of something. I could see nothing wrong.
Best Deals on Digital Electronic Egg Incubator Thermostat with Remote Sensor
I bought 2 of these last year just had the second one fail lost over 100 goose eggs this time first time I only lost couple dozen if you are installing these you really need a backup system or an alarm will never use them againHonest reviews on Digital Electronic Egg Incubator Thermostat with Remote Sensor
I'm very pleased. Easy to install and seems to be right on temperature based on a separate electronic thermometer I set inside as a test. Exactly what I wanted and good delivery. ThanksTuesday, April 29, 2014
Southern Enterprises Tennyson Mahogany Electric Fireplace Review
Customer Ratings: 
List Price: $937.99
Sale Price: $651.36
Today's Bonus: 31% Off

This product LOOKS GREAT in my house but the heat is just OK... Nothing spectacular... It's in my living room and I don't feel a huge difference in temperature when it's on. Overall I'm happy with the purchase but the company sent me the incorrect bottom piece. I haven't taken the time out yet to contact them about getting the correct bottom piece.
Merry Christmas to me!!
easy to assemble,
gives a nice flam effect
book shelves are large
I added dimming lights for effect
holds TV at a good hight
List Price: $937.99
Sale Price: $651.36
Today's Bonus: 31% Off
This product LOOKS GREAT in my house but the heat is just OK... Nothing spectacular... It's in my living room and I don't feel a huge difference in temperature when it's on. Overall I'm happy with the purchase but the company sent me the incorrect bottom piece. I haven't taken the time out yet to contact them about getting the correct bottom piece.
Click Here For Most Helpful Customer Reviews >>
First off, I am a firm believer that a fireplace should, you know, have real fire in it. I was very hesitant about getting an electric fireplace because some of them are so cheesy looking. After shopping around, my husband and I weren't able to find a gas fireplace that we liked, and we weren't sold on gel, so we decided to try out the electric. I'm so glad that we did. The fireplace is absolutely lovely! It is very heavy duty and well made. It is veneered, but you wouldn't know it. We had to really look to actually determine that it wasn't solid wood. It is a bit of work to put together, but if you have a power drill it is much easier. The flames and logs are controlled independently so you can make them brighter or dimmer. On the lowest 3 settings the flames are very convincing, to the point that people have asked if it is a gas or electric fireplace. You can also run it with or without heat, which is very nice. It also comes with a handy little remote. We have a small living room (11 x 15) and use the fireplace to supplement our forced air heat. It makes the room very cozy and warm. The shelving on the sides is very handy, we were able to retrofit it to house our electronics. Everyone who has seen it loves it and so do we! The only thing that I didn't like was the obnoxious warning sticker on the front glass. It peels off easily but leaves a lot of sticky residue. It came off after some scrubbing and doesn't change my opinion about the quality of the product.Best Deals on Southern Enterprises Tennyson Mahogany Electric Fireplace
This fireplace heats my 24 X 24 office perfectly and looks so beautiful and creates a cozy yet professional environment. My 47 inch flat TV sits on top which was the primary reason for this unit! Winters are tough in Chicago and rather than turning up the heat in the whole house, I can tourn on the fireplace and I am warm and cozy in my at-home professional office! the price was compatible with producs at Lowes, Home Depot and Mernards but this is much better looking and a fair price!Merry Christmas to me!!
Honest reviews on Southern Enterprises Tennyson Mahogany Electric Fireplace
looks great,easy to assemble,
gives a nice flam effect
book shelves are large
I added dimming lights for effect
holds TV at a good hight
Find helpful customer reviews and review ratings for Southern Enterprises Tennyson Mahogany Electric Fireplace
The product looks good when assembled, and assembly is not difficult, instructions are pretty good considering it comes from China. We had some problems, however, first with the delivery, when one of the delivery men (it comes via a trucking company, as it is too big for UPS or Fedex) dropped the box containing the fireplace unit in our driveway because he was in such a hurry that he tried to carry our paperwork in one hand and the box in his other hand-didn't work! Luckily, the packing was strong enough that there was no damage to the unit. Then, when opening the fireplace mantel box, we found three damaged pieces inside-surprisingly they were in the center of the carton, presumably well-protected from shipping damage. Who knows? Maybe they were packed in damaged condition at the factory in China. Anyway, a phone call to SEI in Texas had the required replacement parts on their way, and they arrived 8 calendar days later via UPS. Customer service was good, but I was still frustrated by having to wait the extra week to continue the assembly, as I had already assembled the bookcases. I think this item is a decent value compared to the prices I've seen in stores or online. However, I also believe all electric fireplaces like this are very overpriced considering what you actually get. We hope it will last for a good long time, but we'll have to wait and see on that.Thursday, February 20, 2014
Cheap 9620 Robertshaw DIGITAL THERMOSTAT
Works well and is fairly easy to figure out. Took about 7 minutes to program in the four time slots for all seven days. Can only set the times in 30 minute increments 15 minute would be nicer, but not a big deal. Overall, works great. I set it and now it changes the temp as I told it to and I don't have to think about it.
Click Here For Most Helpful Customer Reviews >>
purchase as a replacement for a thermostat that was broken. Thermostat was OK. Attachment screws & batteries looked used. Batteries lasted 1 week.Best Deals on 9620 Robertshaw DIGITAL THERMOSTAT
My Robert Shaw is one of the worst gadgets ever created by man. Impossible to program, impossible to operate, and despite several calls for help to Shaw, none was forthcoming. I threw away $150 on a piece of garbage. I feel like taking a sledge to it.Monday, January 27, 2014
On/Off Wireless Fireplace Control System with LCD Screen Review
I attached it to a QuadraFire pellet stove and it works well. The only thing that would make it better would be a method to attach it temporarily to a wall like a regular thermostat. I used a peel and stick command strip, but think a piece of velcro might work better if you are taking it down a lot. Otherwise, I recommend it.
Click Here For Most Helpful Customer Reviews >>
This product works well and was easy to setup and install. If you are thinking of purchasing one be aware that I sent mine back twice as it just looked plain beatup upon arrival. I was assured by the vendor they were new units. I don't understand how something new can be all scuffed up. Funtionality is great! Presentation not so much :(Best Deals on On/Off Wireless Fireplace Control System with LCD Screen
The remote arrived quickly and was very easy to install and seems to be working great. No issues and we've had it a few weeks now.Honest reviews on On/Off Wireless Fireplace Control System with LCD Screen
Our other unit went bad and so we upgraded to this and it is easier to use and looks better too. Happy with the purchaseFind helpful customer reviews and review ratings for On/Off Wireless Fireplace Control System with LCD Screen
Built in thermostat will replace the one on the wall. Battery powered no power required. RF remote goes through walls enabling to locate reciever in the basement. Very hot! (No pun intended)Wednesday, December 4, 2013
Reviews of Honeywell T87N1026 Round Non-Programmable Thermostat
Customer Ratings: 
List Price: $104.79
Sale Price: $55.00
Today's Bonus: 48% Off

Just perfect. Purchased for elderly parents. Still wont end the thermostat war. Very easy to install and use. Ty Ty
List Price: $104.79
Sale Price: $55.00
Today's Bonus: 48% Off
Just perfect. Purchased for elderly parents. Still wont end the thermostat war. Very easy to install and use. Ty Ty
Click Here For Most Helpful Customer Reviews >>
We installed the thermostate for my elderly mom, who has poor sight. She still has a problem seeing the numbers on the dial, and the cool, heat or off switch should be made longer for a person with poor sight. The switch should protrude above the dial. I think my mom turns the dial instead of switching the switch, because she fumbles finding the switch located behind the face of the thermostat.Best Deals on Honeywell T87N1026 Round Non-Programmable Thermostat
Great for old folks who want a simple large thermostate to read. Had it professionally installed. Well worth the money spent.Honest reviews on Honeywell T87N1026 Round Non-Programmable Thermostat
Makes it easy to adjust temperatures when the regular thermostat numbers cannot be seen due to diabetes-affected vision. This should be a standard product in any household where occupants have vision limitations.Find helpful customer reviews and review ratings for Honeywell T87N1026 Round Non-Programmable Thermostat
needed as a gift for Mom...what a difference to set thermostat now ! I think I need one myself !Thursday, November 28, 2013
Reviews of Lasko 6251 Electronic Fan-Forced Heater with Warm Air Motion
Customer Ratings: 
List Price: $46.99
Sale Price: $33.93
Today's Bonus: 28% Off

This space heater is by far the best I have owned. My office is in the basement in a 17' x 11' room. There is no heat in the room, and it gets very cold. Over the past 20 years, I have owned an assortment of space heaters, but none have come close to this one. To test the space heaters, I time how long it takes to heat the room using an atomic clock that also includes the room temperature. It was 48 degrees in the office this morning. It is now 65 degrees after an hour and ten minutes. This fan-forced heater increased the temperature dramatically. To test it further, we brought the heater to our master bedroom, which is 24' x 24'. The temperature was 58 degrees when we started it here at 8:00 last night. By 10:00 it was 65 degrees in the room. We couldn't believe it. We also own Lasko oscillating fans that absolutely blow away the competition. They have a wider blade span and produce what feels like twice the breeze. We are going to purchase a couple more of these space heaters. My opinion you're not going to find a better space heater than this one.
However, about a month ago the time between resets became shorter and shorter, until finally it reached the point where it would only run for 10 minutes before needing another 10-minute reset. That's such a hassle that I've pretty much quit using it.
It's not completely dead. When it's plugged in, the red power light is glowing. And, as noted, it will run -and heat -for about 10 minutes before shutting off.
I see where a couple of reviewers had units that went completely dead. But I'm wondering if anyone else has had the problem I'm having, and if there is any solution (short of returning it).
The unit puts out a lot of heated air volume, even when the unit is set to low speed fan. Air flow direction is set with a small lever that controls louvers positioned in front of the heated air outlet. I have my heater in my Maine workshop set to the lowest setting and lowest fan speed and that is enough for me to work in short sleeves. Finally, great price.
List Price: $46.99
Sale Price: $33.93
Today's Bonus: 28% Off
This space heater is by far the best I have owned. My office is in the basement in a 17' x 11' room. There is no heat in the room, and it gets very cold. Over the past 20 years, I have owned an assortment of space heaters, but none have come close to this one. To test the space heaters, I time how long it takes to heat the room using an atomic clock that also includes the room temperature. It was 48 degrees in the office this morning. It is now 65 degrees after an hour and ten minutes. This fan-forced heater increased the temperature dramatically. To test it further, we brought the heater to our master bedroom, which is 24' x 24'. The temperature was 58 degrees when we started it here at 8:00 last night. By 10:00 it was 65 degrees in the room. We couldn't believe it. We also own Lasko oscillating fans that absolutely blow away the competition. They have a wider blade span and produce what feels like twice the breeze. We are going to purchase a couple more of these space heaters. My opinion you're not going to find a better space heater than this one.
Click Here For Most Helpful Customer Reviews >>
I bought this about four months ago to keep me warm while I work in my home office. It worked great for the first two months. Then, about once in every 6 or 8 hours, it would suddenly turn off. Following the instructions that are printed on the back, I would reset it by unplugging it, waiting 10 minutes, and then turning it back on. Then it would run for another 6 or 8 hours.However, about a month ago the time between resets became shorter and shorter, until finally it reached the point where it would only run for 10 minutes before needing another 10-minute reset. That's such a hassle that I've pretty much quit using it.
It's not completely dead. When it's plugged in, the red power light is glowing. And, as noted, it will run -and heat -for about 10 minutes before shutting off.
I see where a couple of reviewers had units that went completely dead. But I'm wondering if anyone else has had the problem I'm having, and if there is any solution (short of returning it).
Best Deals on Lasko 6251 Electronic Fan-Forced Heater with Warm Air Motion
I found the Lasko 6251 while looking for a small space heater. The idea was to heat the area around by more immediate work area while turning down the thermostat for the rest of the shop. I didn't want an oscillating heater, just a small and more focused unit. The Lasco is small and stays out of the way. It has a clean appearance and it is quiet. There is control of temperature and fan speed and a timer can be set for folks like me who leave and forget to turn the heater off.The unit puts out a lot of heated air volume, even when the unit is set to low speed fan. Air flow direction is set with a small lever that controls louvers positioned in front of the heated air outlet. I have my heater in my Maine workshop set to the lowest setting and lowest fan speed and that is enough for me to work in short sleeves. Finally, great price.
Honest reviews on Lasko 6251 Electronic Fan-Forced Heater with Warm Air Motion
This is truly a cool-touch heater. The outside of the unit never gets hot, and since I bought it for my 18mo daughter's bedroom, that is very important. Also, the tip-over sensor works great. Would be 5 stars, but it draws a lot of power, enough that it sometimes trips the breaker. However, I live in a very old house with very old breakers (the kind that are just a panel of switches on the wall) and I'm pretty sure the breakers are a bit weak. Would probably not have the same problem in a newer house.Find helpful customer reviews and review ratings for Lasko 6251 Electronic Fan-Forced Heater with Warm Air Motion
This product meets most of the space heater needs I have been looking for: I'm using it primarily in my motorhome to reduce LP gas furnace use, and the heat outlet is at the top so I don't have to worry about my cat getting burned by a heat spot--he is shorter than the exhaust grill. The fan is pretty quiet and temp setponts are a nice advantage, but those thermostat setpoints only work on high heat "for my convenience." After my room/moho is warm I prefer to use the lower wattage setting--it is safer--but then I can't use the thermo-temperature setpoint. What were they thinking? My guess is: NOT thinking. If this is not an issue then I highly recommend this unit, especially for the price.Saturday, November 23, 2013
Reviews of Bionaire Thin Triple Window Fan
This is a quiet and awesome little fan. Does not make much noise on high. This fan seems blow a lot of air on high. The unit fits my 34.5" window, and does not require the removal of the screen to install. Note that the fan would require the physical removal and flipping to work in exhaust mode (I believe you may need to remove the screen in this instance as the front of the unit protrudes more than the back).
The three fans operate depending on the speed setting. High is all three, medium is the outer two, and low is just the center. Thermostat seems to function, although I keep it on 65 and it stays on throughout the day. Overall great purchase, highly recommended.
The pros:
Much smaller in height
Much quieter
On high it delivers better performance than the dual
The cons:
Does not fit as well in my window there were large gaps that I had to cover with tape to get adequate sealing/performance
Unless you run the fan on high all the time ( I do ), one or more fans will not be spinning...(on low only one spins, medium two, high all three), so unless you run it on high, you run the risk of bugs coming in etc/basically have an open window. Not a huge deal because the fan is quiet on high but worth noting
Bring in the Bionaire Thin Triple Window Fan.
First, it shipped like really quick and it wasn't prime eligible (which is a bummer) so I was worried I was going to have to wait awhile, especially since shipping was free (implies ground shipping that is super slow). I placed my order mid day on Monday and it was at my door Thursday afternoon!
Second, it was very easy to install, it was delivered and within 5 minutes it was pumping in fresh air.
Third, my window is actually to tall to technically install it vertically however it was secure enough without being secured on the top that I am going to leave it with the gap.
Fourth, someone mentioned a rubbing sound, my unit faintly rubbed as well at first but it quickly went away. I noticed the rubbing sound (again very minor) is only present when I first turn it on and then it goes away quickly.
Fifth, even on the highest setting this fan hums along nicely will pushing quite a bit of air through.
Sixth, the price is a bit high for a fan but given how perfectly it solves my particular situations problem, I don't care because it was worth it.
Overall, I would recommend it, especially if you are in a similar situation.
I was attracted to the Bionaire Thin Triple Window Fan because the reviews seemed favorable and seemed the closest solution I could find to my idea of making something like this from several quiet computer cooling fans. I sourced one at one of the major big-box retailers in my area, however the one I found has manual wheel controls for fan speed and temperature control, rather than LEDs. But otherwise I believe it's the same fan as in this listing.
Build quality seems decent and the fans are indeed pretty quiet, though not super quiet. Compared to the twin window fans I already have, the Bionaire is probably less than half and maybe 1/4 as loud. Most of the noise seems to be from air passing through the unit and not from the motors. Best part is each fan seem well dampened and the weak vibrations that transfer to the window frame aren't strong enough to cause any reverberations.
The unit I purchased came with an accordion-like sleeve preinstalled along one side that can be pulled out to block the remaining opening in the window. However, my windows are only 23" wide and it was immediately obvious, once out of the box, that the fan was too wide. The instructions state it's designed to fit windows with a minimum 25.5" width (and 8" opening height). I had visited the Bionaire website beforehand, but was unable to get the product pages to display correctly and therefore couldn't find the specifications, which also weren't listed here. At first I was disappointed because the other aspects of the fan looked great. But a bit of tinkering by unscrewing six of the eight screws that hold the fan's housing together, allowed me to pry it open far enough to remove the accordion-sleeve. The resulting width of the fan (as seen in the product listing here without the extension sleeve) is about 23" and fits the window with about a half-inch gap on the side, which I plugged with a small towel.
As for fan speed... it seems OK. There are probably more powerful window fans available, but for an average sized room (that is west facing with three computers that heat it up very quickly on summer afternoons), it creates good enough air circulation with it exhausting air from one of the room's two windows and all three fans running.
Too early to state anything about durability and reliability, but wanted to point out that it could be a tight fit for smaller windows.
Four stars so far. One deducted for no specifications printed on the unit's box. In hindsight it might have been a good thing since I probably wouldn't have bought it if it stated, as the instructions do, that minimum window width is 25.5". As explained, a bit of very easy tinkering got it to fit a 23" window.
The three fans operate depending on the speed setting. High is all three, medium is the outer two, and low is just the center. Thermostat seems to function, although I keep it on 65 and it stays on throughout the day. Overall great purchase, highly recommended.
Click Here For Most Helpful Customer Reviews >>
I have had several types and brands of window fans, and they run for days at a time in my apartment on exhaust mode to remove smoke, cooking/frying smells, etc. This fan is by far the smallest in height almost half the size of the other dual fan types.The pros:
Much smaller in height
Much quieter
On high it delivers better performance than the dual
The cons:
Does not fit as well in my window there were large gaps that I had to cover with tape to get adequate sealing/performance
Unless you run the fan on high all the time ( I do ), one or more fans will not be spinning...(on low only one spins, medium two, high all three), so unless you run it on high, you run the risk of bugs coming in etc/basically have an open window. Not a huge deal because the fan is quiet on high but worth noting
Best Deals on Bionaire Thin Triple Window Fan
Alright here is my situation. I live in a 350 sq foot studio on the first floor with a cat. During the summer when it is hot, I can't sleep with my only window (yes just one in the whole apartment) wide open because of safety concerns and my cat likes to climb screens. So, I was using a single little fan I got at target placed in front on 1-2" opening in my window. Needless to say, it got stuffy and warm.Bring in the Bionaire Thin Triple Window Fan.
First, it shipped like really quick and it wasn't prime eligible (which is a bummer) so I was worried I was going to have to wait awhile, especially since shipping was free (implies ground shipping that is super slow). I placed my order mid day on Monday and it was at my door Thursday afternoon!
Second, it was very easy to install, it was delivered and within 5 minutes it was pumping in fresh air.
Third, my window is actually to tall to technically install it vertically however it was secure enough without being secured on the top that I am going to leave it with the gap.
Fourth, someone mentioned a rubbing sound, my unit faintly rubbed as well at first but it quickly went away. I noticed the rubbing sound (again very minor) is only present when I first turn it on and then it goes away quickly.
Fifth, even on the highest setting this fan hums along nicely will pushing quite a bit of air through.
Sixth, the price is a bit high for a fan but given how perfectly it solves my particular situations problem, I don't care because it was worth it.
Overall, I would recommend it, especially if you are in a similar situation.
Honest reviews on Bionaire Thin Triple Window Fan
I have a couple cheap-o twin window fans that work OK, but are pretty loud. Mounted in the 1940s era double-hung wood windows throughout most of the house, they cause extremely annoying reverberations when run at the high setting, even if I try to dampen the vibrations of the windows in their frames.I was attracted to the Bionaire Thin Triple Window Fan because the reviews seemed favorable and seemed the closest solution I could find to my idea of making something like this from several quiet computer cooling fans. I sourced one at one of the major big-box retailers in my area, however the one I found has manual wheel controls for fan speed and temperature control, rather than LEDs. But otherwise I believe it's the same fan as in this listing.
Build quality seems decent and the fans are indeed pretty quiet, though not super quiet. Compared to the twin window fans I already have, the Bionaire is probably less than half and maybe 1/4 as loud. Most of the noise seems to be from air passing through the unit and not from the motors. Best part is each fan seem well dampened and the weak vibrations that transfer to the window frame aren't strong enough to cause any reverberations.
The unit I purchased came with an accordion-like sleeve preinstalled along one side that can be pulled out to block the remaining opening in the window. However, my windows are only 23" wide and it was immediately obvious, once out of the box, that the fan was too wide. The instructions state it's designed to fit windows with a minimum 25.5" width (and 8" opening height). I had visited the Bionaire website beforehand, but was unable to get the product pages to display correctly and therefore couldn't find the specifications, which also weren't listed here. At first I was disappointed because the other aspects of the fan looked great. But a bit of tinkering by unscrewing six of the eight screws that hold the fan's housing together, allowed me to pry it open far enough to remove the accordion-sleeve. The resulting width of the fan (as seen in the product listing here without the extension sleeve) is about 23" and fits the window with about a half-inch gap on the side, which I plugged with a small towel.
As for fan speed... it seems OK. There are probably more powerful window fans available, but for an average sized room (that is west facing with three computers that heat it up very quickly on summer afternoons), it creates good enough air circulation with it exhausting air from one of the room's two windows and all three fans running.
Too early to state anything about durability and reliability, but wanted to point out that it could be a tight fit for smaller windows.
Four stars so far. One deducted for no specifications printed on the unit's box. In hindsight it might have been a good thing since I probably wouldn't have bought it if it stated, as the instructions do, that minimum window width is 25.5". As explained, a bit of very easy tinkering got it to fit a 23" window.
Find helpful customer reviews and review ratings for Bionaire Thin Triple Window Fan
I use this fan in the summer time to cool the house over night. It's very quiet, even on full speed (all three fan blades going), is easy to operate, easy to store (I take it out of the window every morning.) and even looks good with its black finish. The construction quality is excellent and it's very easy to operate without having to move or tip over. It fits fine in the window vertically, but I'd imagine horizontal use would be equally easy. My only complaint is that I wish it had a remote control, especially for the price, but that might be too much to ask.Sunday, November 17, 2013
Review of Lasko 5586 Digital Ceramic Tower Heater
Customer Ratings: 
List Price: $86.99
Sale Price: $63.62
Today's Bonus: 27% Off

Mid-century modern houses are designed for California springs and summers. But the floor to ceiling single paned glass windows let the cold right in.
I borrowed a friend's Dyson Hot heater. Being a designer, I loved the design of it--you can't get more elegant than that. But--what I didn't like was the sound of it--like a tiny Pratt and Whitney Turbo Jet engine--loud--and to me not a "white noise" kind of sound, but actual noise. Even once I got used to the sound of it (and you do), it didn't put out a ton of heat, so it could be on for hours and the room was still cold.
I then got a Lasko Digital Ceramic Tower Heater to try.
You have to assemble the base (snap it together, two screws), then four screws to attach the heater to the base. It took about five minutes--but you do need a philips screw driver.
You also need two AAA batteries, something that the box mentions in small type, but if you get home without it, you won't be able to use the remote control. I used to think a remote control on a room heater was a silly thing, but once you have it, it becomes as vital as one for a television, because it lets you adjust the temperature at a distance.
The first thing you notice about this heater is how QUIET it is. Really just a whisper. And the sound it makes is a low tone that doesn't interfere with listening to music or the TV. Even on "Hi" mode, it's still much quieter than the Dyson.
You can set it to run continuously on "Lo" or "Hi" or set the thermostat to the temperature you want, and it will turn on and off automatically to keep it there. Because it's so quiet, you can leave it on at night when you sleep.
And, if you want it to shut off during the night to save power, it has an 8 hour timer that will automatically shut it off after the amount of time you specify. The Dyson had no timer.
The oscillation is wide and silent. While the unit is tall, it has a reason--as the entire length emits hot air, which warms the room faster.
As much as I like Dyson design, this heater costs 1/4 the price of a Dyson, makes 1/4 the sound, and seems to heat the room about 2 times as well. Do the math--this heater is an excellent value.
Pros:
good looking
nice warmth
automatic temperature mode shuts off and turns on automatically to maintain desired room temp
nice wire
remote with screen
remote batteries provided in the box
quite easy to set up
stable base
sides don't even get warm.
low power mode for power saving
cons:
remote must be pointed directly at it
intermittent fan noises on low power mode
no tilt sensor
List Price: $86.99
Sale Price: $63.62
Today's Bonus: 27% Off
Mid-century modern houses are designed for California springs and summers. But the floor to ceiling single paned glass windows let the cold right in.
I borrowed a friend's Dyson Hot heater. Being a designer, I loved the design of it--you can't get more elegant than that. But--what I didn't like was the sound of it--like a tiny Pratt and Whitney Turbo Jet engine--loud--and to me not a "white noise" kind of sound, but actual noise. Even once I got used to the sound of it (and you do), it didn't put out a ton of heat, so it could be on for hours and the room was still cold.
I then got a Lasko Digital Ceramic Tower Heater to try.
You have to assemble the base (snap it together, two screws), then four screws to attach the heater to the base. It took about five minutes--but you do need a philips screw driver.
You also need two AAA batteries, something that the box mentions in small type, but if you get home without it, you won't be able to use the remote control. I used to think a remote control on a room heater was a silly thing, but once you have it, it becomes as vital as one for a television, because it lets you adjust the temperature at a distance.
The first thing you notice about this heater is how QUIET it is. Really just a whisper. And the sound it makes is a low tone that doesn't interfere with listening to music or the TV. Even on "Hi" mode, it's still much quieter than the Dyson.
You can set it to run continuously on "Lo" or "Hi" or set the thermostat to the temperature you want, and it will turn on and off automatically to keep it there. Because it's so quiet, you can leave it on at night when you sleep.
And, if you want it to shut off during the night to save power, it has an 8 hour timer that will automatically shut it off after the amount of time you specify. The Dyson had no timer.
The oscillation is wide and silent. While the unit is tall, it has a reason--as the entire length emits hot air, which warms the room faster.
As much as I like Dyson design, this heater costs 1/4 the price of a Dyson, makes 1/4 the sound, and seems to heat the room about 2 times as well. Do the math--this heater is an excellent value.
Click Here For Most Helpful Customer Reviews >>
The unit is quiet but not very effective. You have to be close to it to feel warmth. If you're more than five feet away the moving air actually feels cold. This heater doesn't even compare to the warmth generated by my Bionaire 3950 which is completely silent and radiates heat from both sides and top. I'll put this Lasko in my office.Best Deals on Lasko 5586 Digital Ceramic Tower Heater
I received it in time. Set up was not too hard, but you do need both hands and some ingenuity to get the base together and screwed in. You need a screw driver also, a plus shaped one. Plugged it in and turned it on, I got that fresh Lasko smell which I remembered from my first Lasko heater about 4 years ago. It brought back some memories. Anyway, the smell was virtually gone by the next morning. The remote comes with a screen, which shows the settings, so you don't have to look at the heater to know what the settings are. The remote screen shuts off after a few seconds, and then the first button you press will bring the screen back on, but won't change the settings, only subsequent button presses will change the settings. So just remember, if the remote screen is off, the first button press only turns the screen on. One issue is that the remote has to be pointed almost exactly at the heater, or it wont work, this sort of makes the screen pointless, because if you're lying down, you wont be able to see the screen when pointing the remote at the heater. And if you're going to look at the heater, you might as well read the settings on the heater's screen. The unit looks quite nice, you can put it next to a book shelf or something, it wont stick out too much. It is not very noisy, but when it turns on, you definitely hear it. There isn't any tilt sensor as far as I am aware, I tried holding it almost horizontal, and it kept on working. The base is quite stable though. The wire is nice and thick, it is made of a matte, soft material. not like other wires. I like it really warm, so I just set it to max heat and let it run to see how warm the room would get, it got to about 83 then was fluctuating between 83 and 84. my other temperature device confirmed this was indeed the room temperature. prior to turning it on, the room was about 63. The room is 240 square feet. Can't fault the heater for this though (first of all 84 is plenty comfy for me), because hot air rises, all the hot air goes straight to the ceiling. If you have a ceiling fan, set that to a very low speed, it will mix up the air and it will get warmer down where the people are. I also noticed a not-too-loud rumbling sound on low heat mode, this is probably the fan. at the high setting, it is gone. perhaps it is not aligned, or is a bit loose. There is a timer, which I didn't test. But I suppose it does what it says. All in all, it's a lovely heater. I wouldn't give my Lasko back if they paid me for it. I think of these things as pets, you'll never find a perfect one. They all have unique personalities, and I love them all the same.Pros:
good looking
nice warmth
automatic temperature mode shuts off and turns on automatically to maintain desired room temp
nice wire
remote with screen
remote batteries provided in the box
quite easy to set up
stable base
sides don't even get warm.
low power mode for power saving
cons:
remote must be pointed directly at it
intermittent fan noises on low power mode
no tilt sensor
Honest reviews on Lasko 5586 Digital Ceramic Tower Heater
Good value heater. I use it for our bedroom in winter in auto mode and does a good job of keeping room at temp we want. quiet and pretty easy but have to be careful you use a full circuit connection or you could blow your circuit.Find helpful customer reviews and review ratings for Lasko 5586 Digital Ceramic Tower Heater
very quiet, and powerful, i love how it looks at my bed room, i recomend it ,i will buy another one for my living roomThursday, November 14, 2013
Review of Lux TX9000TS Touch Screen Seven-Day Programmable Thermostat
Customer Ratings: 
List Price: $79.99
Sale Price: $64.80
Today's Bonus: 19% Off

BOTTOM LINE:
Took about 45 minutes from removing old unit to new installation and completing programming. It works great!
SYSTEM:
4 wire Gas heating and electric cooling.
OLD UNIT:
Honeywell Electronic C9825 bought in year 2000. Has weekday, weekend, 4 periods per day and adaptive recovery. Replaced as temperature override and 'Hold' features work erratically.
TOTAL EXPERIENCE:
1 Week
REVIEW:
The TX9000TS is the 3rd electronic thermostat I've owned and is probably the most intuitive of them all. Lux has provided a generous sized display and a very responsive touch-screen. The back light is a pleasing blue. The unit is 3 parts the main unit, a back plate where you connect the wires and an optional accent plate that provides a .75 inch border to provide a finished look.
I had read the earlier reviews on Amazon and had decided that I will not read the instructions prior to the install to determine how intuitive this system really was? The only exception I would allow myself was if the wiring was significantly different from my old unit which it was not!
The setup was relatively simple. Removed the old unit and replaced it with the new back plate and accent bezel. No new holes to drill. The accent bezel is the closest piece to the wall and is held up by the back plate. I straightened the old wires, inserted into the corresponding clamp and tightened the screws Total time of 15 minutes.
I inserted 2 new alkaline batteries (And NO, I did not use the recommended Duracell or Energizer!) and the unit came to life. I clicked on the time and it started beeping. I could see arrows on the right and intuitively touched them to set the time. Did the same to set the day. Touching the 'Menu' got me into the programming mode for the unit. I touched "SCROLL" to skip to the next feature, and "NEXT" for the next step in the feature programming. I do admit I took a few iterations to get used to the programming logic. Also 'YES' to accept settings is a little different from the colloquial "ENTER" we are used to in a computer literate world!
This unit is programmable for every day of the week. I, at most, need one setting for all week-days and one each for Sat and Sun. While programming the days, I noticed that they had a "COPY" function. I was sure that this was to copy my settings every time I touched it, it went over to the next day. I thought that the data was being copied over and I did verify it after I completed my first iteration of programming. By the way, once you are in the programming mode, setting the start time for any period and/or setting the temperature is as simple as touching the time or temperature and using the up/down arrows. Could not be simpler!
I was fortunate that I had the program settings available from my old unit once I went through a few iterations of errors (not using "YES" to accept settings!) the unit was programmed Total time of 15 minutes
I spent another 10 minutes setting the 'Filter Usage' and 'Swing settings' and reviewing the 'Temperature Calibration' and 'Energy Usage' monitor. The Swing settings only went upto 2.5 degrees in 0.5 degree increments (One of the other reviewer found that it went upto 3.0 degrees???)
I did not see the 'Smart Recovery' option and thought that it might be a switch on the circuit board like my last unit. It was 1.30 in the morning and I did not feel like reading the instructions. I attached the TX9000TS and it kicked off instantly.
The instructions did have the following options that can be changed with the small slide switches towards the back of the main unit -12/24 hours time format, Smart Recovery, Degrees in C or F, and 2 or 5 minute interval between restarts.
OTHER REVIEWER'S CONCERNS
Some of the other reviewers have concerns that the unit does not automatically switch between heating and cooling to keep the temperature constant. This is done intentionally!
In the summer, our ideal temperature is 74 degrees. When we leave for work, our "DAY" period is set to 82 degrees so that the AC does not cool the home while we're out. In an auto switch between heating and cooling, the heat would take over and get the temperature to 82 degrees and maintain it which is NOT the intent!! We do not want the AC to cool any below 82. I can, of course, see the gentleman's point if one spends 90% of their time at home and is OK with the associated heating/cooling cost.
PROS:
* TX9000TS is rated #1 by Consumer Reports
* Cheapest in its class for display size and features
* Very easy to program
* Love the LARGE display and the accuracy of the touch zones.
* Very nice Backlight and fantastic positioning of the backlight switch.
* Like the "CHANGE FILTER" feature. I used to use a Sharpie on the filter and then try to read the date through the grill
* Like the "Low Battery" alert.
* Power Usage also seems like a valuable feature...will find out in the near future! I did manage to find it by pressing menu and scrolling
CONS:
* Lux could have done a better job with the programming terminology and could have improved the user experience with regards to the programming. For e.g., if you had to program day and time, it continues to loop when you click "NEXT"...to exit the programming you need to use "MENU".
* Another feature I miss from my old Honeywell is the "RUN PROGRAM" button which when pressed would clear the "OVERRIDE" functions and run as per the program. The TX9000TS unit achieves this either by touching the temperature and using the arrow keys to bring the temperature to the programmed value, OR, by touching "HOLD" twice. Minor inconvenience.
* The tabs, on the top of the base plate, that hold this unit are very small and I am in constant fear of breaking them off. My old Honeywell had a very robust design.
CONCLUSION:
I do agree that the TX9000TS is not completely intuitive, but it is nowhere as unintuitive as others claim. I do like to play around with stuff that I get...if it were all super-intuitive and easy then it'd be no fun! ;o)
Considering all the features of the TX9000TS, I think Lux offers this product at a very reasonable price. I have found that similar touchscreen thermostats from other companies cost much more.
Finally, I ordered this unit from a third-party seller on Amazon. On the screen there was a small defect in the coating of the touchscreen itself. I wasn't sure if the blip was supposed to be there, so I got in touch with Lux Customer Service. The response was almost immediate, and very helpful. They made every effort to understand what I was trying to describe, and once we determined that there was a problem, they agreed to send out a new one with a prepaid return envelope for my defective unit. I was so surprised at Lux's high level of customer service and their willingness to stand behind their product, since it is usually akin to pulling teeth in order to get problems like this resolved. As a result of the interaction I had with Lux, I would definitely favor their brand of thermostats in the future.
List Price: $79.99
Sale Price: $64.80
Today's Bonus: 19% Off
BOTTOM LINE:
Took about 45 minutes from removing old unit to new installation and completing programming. It works great!
SYSTEM:
4 wire Gas heating and electric cooling.
OLD UNIT:
Honeywell Electronic C9825 bought in year 2000. Has weekday, weekend, 4 periods per day and adaptive recovery. Replaced as temperature override and 'Hold' features work erratically.
TOTAL EXPERIENCE:
1 Week
REVIEW:
The TX9000TS is the 3rd electronic thermostat I've owned and is probably the most intuitive of them all. Lux has provided a generous sized display and a very responsive touch-screen. The back light is a pleasing blue. The unit is 3 parts the main unit, a back plate where you connect the wires and an optional accent plate that provides a .75 inch border to provide a finished look.
I had read the earlier reviews on Amazon and had decided that I will not read the instructions prior to the install to determine how intuitive this system really was? The only exception I would allow myself was if the wiring was significantly different from my old unit which it was not!
The setup was relatively simple. Removed the old unit and replaced it with the new back plate and accent bezel. No new holes to drill. The accent bezel is the closest piece to the wall and is held up by the back plate. I straightened the old wires, inserted into the corresponding clamp and tightened the screws Total time of 15 minutes.
I inserted 2 new alkaline batteries (And NO, I did not use the recommended Duracell or Energizer!) and the unit came to life. I clicked on the time and it started beeping. I could see arrows on the right and intuitively touched them to set the time. Did the same to set the day. Touching the 'Menu' got me into the programming mode for the unit. I touched "SCROLL" to skip to the next feature, and "NEXT" for the next step in the feature programming. I do admit I took a few iterations to get used to the programming logic. Also 'YES' to accept settings is a little different from the colloquial "ENTER" we are used to in a computer literate world!
This unit is programmable for every day of the week. I, at most, need one setting for all week-days and one each for Sat and Sun. While programming the days, I noticed that they had a "COPY" function. I was sure that this was to copy my settings every time I touched it, it went over to the next day. I thought that the data was being copied over and I did verify it after I completed my first iteration of programming. By the way, once you are in the programming mode, setting the start time for any period and/or setting the temperature is as simple as touching the time or temperature and using the up/down arrows. Could not be simpler!
I was fortunate that I had the program settings available from my old unit once I went through a few iterations of errors (not using "YES" to accept settings!) the unit was programmed Total time of 15 minutes
I spent another 10 minutes setting the 'Filter Usage' and 'Swing settings' and reviewing the 'Temperature Calibration' and 'Energy Usage' monitor. The Swing settings only went upto 2.5 degrees in 0.5 degree increments (One of the other reviewer found that it went upto 3.0 degrees???)
I did not see the 'Smart Recovery' option and thought that it might be a switch on the circuit board like my last unit. It was 1.30 in the morning and I did not feel like reading the instructions. I attached the TX9000TS and it kicked off instantly.
The instructions did have the following options that can be changed with the small slide switches towards the back of the main unit -12/24 hours time format, Smart Recovery, Degrees in C or F, and 2 or 5 minute interval between restarts.
OTHER REVIEWER'S CONCERNS
Some of the other reviewers have concerns that the unit does not automatically switch between heating and cooling to keep the temperature constant. This is done intentionally!
In the summer, our ideal temperature is 74 degrees. When we leave for work, our "DAY" period is set to 82 degrees so that the AC does not cool the home while we're out. In an auto switch between heating and cooling, the heat would take over and get the temperature to 82 degrees and maintain it which is NOT the intent!! We do not want the AC to cool any below 82. I can, of course, see the gentleman's point if one spends 90% of their time at home and is OK with the associated heating/cooling cost.
PROS:
* TX9000TS is rated #1 by Consumer Reports
* Cheapest in its class for display size and features
* Very easy to program
* Love the LARGE display and the accuracy of the touch zones.
* Very nice Backlight and fantastic positioning of the backlight switch.
* Like the "CHANGE FILTER" feature. I used to use a Sharpie on the filter and then try to read the date through the grill
* Like the "Low Battery" alert.
* Power Usage also seems like a valuable feature...will find out in the near future! I did manage to find it by pressing menu and scrolling
CONS:
* Lux could have done a better job with the programming terminology and could have improved the user experience with regards to the programming. For e.g., if you had to program day and time, it continues to loop when you click "NEXT"...to exit the programming you need to use "MENU".
* Another feature I miss from my old Honeywell is the "RUN PROGRAM" button which when pressed would clear the "OVERRIDE" functions and run as per the program. The TX9000TS unit achieves this either by touching the temperature and using the arrow keys to bring the temperature to the programmed value, OR, by touching "HOLD" twice. Minor inconvenience.
* The tabs, on the top of the base plate, that hold this unit are very small and I am in constant fear of breaking them off. My old Honeywell had a very robust design.
CONCLUSION:
I do agree that the TX9000TS is not completely intuitive, but it is nowhere as unintuitive as others claim. I do like to play around with stuff that I get...if it were all super-intuitive and easy then it'd be no fun! ;o)
Click Here For Most Helpful Customer Reviews >>
I have been so pleased by this product. It was very easy to install. The large touchscreen and display size made programming a breeze. I didn't think it was possible to really like a thermostat, but this one is so easy to interface with and so attractive that I'm actually enjoying it a bit. The fact that it is a touchscreen is the best part--if I had to buy another thermostat and this model were not an option, I would definitely look for another that had a touchscreen. The unit is working flawlessly and keeping the house at a consistent temperature--much better than my old mercury thermostat.Considering all the features of the TX9000TS, I think Lux offers this product at a very reasonable price. I have found that similar touchscreen thermostats from other companies cost much more.
Finally, I ordered this unit from a third-party seller on Amazon. On the screen there was a small defect in the coating of the touchscreen itself. I wasn't sure if the blip was supposed to be there, so I got in touch with Lux Customer Service. The response was almost immediate, and very helpful. They made every effort to understand what I was trying to describe, and once we determined that there was a problem, they agreed to send out a new one with a prepaid return envelope for my defective unit. I was so surprised at Lux's high level of customer service and their willingness to stand behind their product, since it is usually akin to pulling teeth in order to get problems like this resolved. As a result of the interaction I had with Lux, I would definitely favor their brand of thermostats in the future.
Best Deals on Lux TX9000TS Touch Screen Seven-Day Programmable Thermostat
Really simple to Install with just a screwdriver. Wiring made simple by good instructions. The product itself comes with a size increase backplate to avoid having to redecorate if size does not correspond to old unit. Now onto the functions, really simple easy to program with smart copy function. Large display and numerals can be read from 10 feet away. Touch screen is a pleasure to use. Backlight is bright and clear and makes this unit an absolute dream do adjust in the night time or as you walk into the house.Honest reviews on Lux TX9000TS Touch Screen Seven-Day Programmable Thermostat
I bought this thermostat to replace a programmable Honeywell unit that was the same price, and had many of the same features, but was inaccurate when it came to maintaining temperature. This Lux is easy to set-up, easy to take off the wall and replace the battery, and has many features the Honeywell did not have. I like the seven day programming, and the touch-screen. I do wish it displayed the room temperature and set temperature at the same time, though. Also, I am not fond of the switches that control heat or cool and fan mode, but it's a minor issue as those controls are not used often. Overall, it's a great thermostat.Find helpful customer reviews and review ratings for Lux TX9000TS Touch Screen Seven-Day Programmable Thermostat
I can't say enough about this product. bought a two story 2854 sq ft house. Got the first electric bill and it was $370 (bulging eyes). At that moment i went online and bought two Lux TX9000TS after reading reviews for the two units in my home. my next bill with those two Lux units controlling my a/c units the whole time was $125. that's almost a third of the cost of running the a/c units with the original controllers. it paid for itself in one month...
Subscribe to:
Posts (Atom)