Showing posts with label wall heater thermostat. Show all posts
Showing posts with label wall heater thermostat. Show all posts

Friday, January 16, 2015

Buy Aroma Hot Plates

Aroma AHP-303 Single Hot Plate, Black
Customer Ratings: 4 stars
List Price: $19.99
Sale Price: $16.00
Today's Bonus: 20% Off
Buy Now

For all the users who have had this fail. There is a minor "flaw" with this product, but failure can be avoided easily.

There is a thermal fuse in the product located near the side of the device. You should maintain 10 inches of clearance around all sides (no towels, etc.) to prevent the thermal fuse from overheating causes the device to "fail". This fuse is intentionally sensitive to avoid the product from causing a fire.

(Ideal design would have been a resettable PTC fuse, but this would increase cost).

The temperature control is from a bimetallic switch whose tension is controlled by a screw connected to the knob. Internals are well built and mounted, albeit simple. Appropriate heat shielding is used.

Otherwise don't expect magic. I purchased this for a sous vide and intentionally chose a simple cheap product. However caveats for users expecting fast temperature response: while it heats very quickly, it cools very slowly. (I did not rely on the thermostat to control the temperature, the included thermostat only very roughly controls the temperature and allows it to fluctuate wildly.)

Edit 9/10/2012

So far no issues, fairly constant use. For users wondering I find it draws around 8 Amps (max amperage). A 6 Amp breaker will trip when running this device (I would size all wiring for 15 Amps, but that's just me).

Also the top surface is very heavy, which causes it to hold a great deal of heat if you are building a sous vide I would try to maintain the temperature of the surface to your desired temperature. (eg place your thermocouple near the bottom of the pot, I let mine touch the bottom).

Edit 12/13/2012

Note: Your mileage may vary: the HIGH temperature setting does still regulate the temperature. Aka setting it on HIGH isn't going to just cause it to be constantly powered. This I don't mind. If it were to be constantly powered it would without doubt blow the thermal fuse, and with my PID controller it doesn't really affect anything.

Click Here For Most Helpful Customer Reviews >>

I don't usually write reviews of products, but when I saw the overwhelmingly negative reviews this product has received, I had to speak up. I've had one of these for several years, and it's been working -and still works -flawlessly. I use it mostly for keeping a pot of tea at the temperature I like throughout the day, and I'm quite pleased with how well I can control the temperature of the hot plate.

The heating plate is cast -something, and it holds heat well. It does everything I want it to do exactly as I want it to do it, and the price is pleasantly modest. What more could I want? I don't know what planet these other folks are on, but the reason I returned to this product page is to buy a second one for my office!

Best Deals on Aroma Hot Plates

people dont usually write these reviews unless they have a problem with the product and want to warn other potential buyers.

i've been using this thing for well over a year now and it hasnt let me down one bit. its durable and requires no special care, just turn it on and set it to the level you want and let it do its thing. its reliable, quick,effortless and i use it nearly every day.

Honest reviews on Aroma Hot Plates

I ordered several different hot plate single burner cookers to see which one I liked best, and this one won. It's sturdy and heavy.. and unlike all the others, it can be CLEANED....which greatly prolongs its life..Impossible to clean the others... so they get tossed after a few months. Some of the cheaper models didn't heat properly after a while, and even became an electrical hazard so had to be discarded. This one seems to be a better made unit.

The control settings are accurate, and nice to have 3 cook settings, plus a 4th 'warm' setting.

Find helpful customer reviews and review ratings for Aroma Hot Plates

Although it appears to be a great product for the first couple of months... when it's done.. it's done! It simply STOPPED working after 2 months. If you purchase this item, be certain you purchase the small appliance replacement warranty from Amazon.. because the manufacturer certainly will not replace it!

Buy Fom Amazon Now

Friday, August 8, 2014

Best World Marketing Winchester II Factory Direct Deals

World Marketing Winchester II Factory Direct
Customer Ratings: 4.5 stars
List Price: $219.99
Sale Price: $188.98
Today's Bonus: 14% Off
Buy Now

I received this fireplace one week ago it does require some assembly,

It is fully functional and has two heater settings

it also lets you keep the fireplace running without the heater

if you just want the look of a fireplace thats on..

I paid 154.00$ for this I received free shipping and am pleased with the purchase.

It works well.

Click Here For Most Helpful Customer Reviews >>

I purchased this product at Christmas and my husband and I have enjoyed it very much so far. It throws off just enough extra heat to keep our living room warm so that we don't have to turn up our electric heat during these cold nights. I also love the ambiance it creates. I am very happy with the product so far.

Best Deals on World Marketing Winchester II Factory Direct

Great Little Fireplace. We love the look of the warm fire through the glass. It can be used just to look at the fire light or with the heater feature on. We use ours year round-even in the summer evenings with the heat feature off.

Honest reviews on World Marketing Winchester II Factory Direct

I ordered this faux fireplace heater for my son's room. The reviews were solid, and the heating system was fire safe.

However, they fail to mention that the "oak finish" is cheap veneer, not oak.

And NO ONE mentioned anywhere in the advertisement here that the unit arrives UNASSEMBLED!!!!

I am concerned because the unit I bought two years ago from AMAZON was solid oak (not a cheap finish), and it came fully assembled.

I cannot yet comment on the heater itself, but I did want to warn prospective buyers that the quality of "oak finish" has been downgraded without clarification or any change in the language.

I will add an update in a few days after we have had a chance to use it.

***********************************************************************************

I have now had a chance to assemble the device, and to use it in my son's room for more than a week of cool weather.

First, the assembly is not easy. There are 80 pieces in the box, mainly screws (55 main screws, + 3 smaller ones), so be prepared to dedicate at least an hour to the work.

I was not impressed with the durability of the heater once constructed. It is heavy, and it is not designed for major relocations once it is constructed.

On the other hand, and despite the faux oak finish, it really is a beautiful addition to my son's room. He LOVES it--and uses the false flame as a night light to hypnotize him to sleep. It is quite nice to sit in a darkened room and stair at the "fire." The heater and thermostat also work well. My ten-year-old was able to operate the controls out of the box. Another plus.

As a result, I have raised the review from 2 stars to 4 stars. I still take off some credit for the faux finish, the lack of warning about assembly required. But the product does overall deliver the quality you hope and expect.

Find helpful customer reviews and review ratings for World Marketing Winchester II Factory Direct

This unit is very sturdy and beautiful... but you better be prepared to turn up the television! The heater is quite loud. I owned another brand unit for years it was not nearly as loud. I am keeping it because it is so attractive.

Buy Fom Amazon Now

Friday, July 4, 2014

Review of Whirlpool 279973 Dryer Thermostat

Whirlpool 279973 Dryer Thermostat
Customer Ratings: 5 stars
List Price: $32.90
Sale Price: $7.95
Today's Bonus: 76% Off
Buy Now

I can't really say much about this item because I only replaced my original working part based on the recommendation that this part, along with a few others, should be replaced when your dryer stops working properly. My original part was still testing good with a multimeter but I replaced it anyway and tucked it away as a spare part. This new thermostat worked as advertised and is still holding up fine after 7 months.

Click Here For Most Helpful Customer Reviews >>

I bought these in an attempt to save $180 repair bill. It took the better part of a day to take the dryer apart and put it back together but it was well worth it

Best Deals on Whirlpool 279973 Dryer Thermostat

Why must I write so many words, I just want to give it 5 stars because it worked it's not like it changed my life or anything it just worked

Honest reviews on Whirlpool 279973 Dryer Thermostat

This was a direct replacement that solved the problem and got us back on the road to clean and dry clothes!.

Find helpful customer reviews and review ratings for Whirlpool 279973 Dryer Thermostat

i went to a local parts store and when he gave me the bill it was over $90 thankfully i had already cheaked out the same parts on your web for less than $20, so you get all my business, thanks so much (jerry chancy)

Buy Fom Amazon Now

Review of Attic Fan Replacement Motor

Attic Fan Replacement Motor
Customer Ratings: 4.5 stars
List Price: $89.95
Sale Price: $56.00
Today's Bonus: 38% Off
Buy Now

This motor is identical to the Lomanco motor I was replacing but is more expensive. Even the part numbers are identical. The only difference is that this motor is more expensive.

I was hoping it would be a better motor since the thermal protector in my Lomanco motor burned out and it uses sleeve bearings.

Click Here For Most Helpful Customer Reviews >>

This motor works as a replacement, but has the same steel sleeve bearings as the original that will require regular lubrication (yearly, at least) to keep them from seizing and burning out the thermal fuse. The problem is, you have to disassemble the fan to had a couple drops of oil to the motor bearings.

Best Deals on Attic Fan Replacement Motor

Broan Attic Fan (340, 343, 350, 353) Replacement Motor # 97009316

Having removed our 9-year old Broan attic fan for a remodeling project, it was obvious that the fan blade didn't turn as easily as when it was new. However, rather than buy a replacement motor, I simply cleaned the bearings on the old one. Some notes:

Our fan's motor has a 3-prong cord plugged into a dedicated receptacle next to it, which simplified removing the unit. We have 3 attic fans and I always install a short heavy-duty extension cord on the fan and mount a receptacle nearby to simplify maintenance.

Removed the fan blade and unloosened two of the three bolts that held the motor clamp tight.

Removed the two screws that held the thermostat on the fan frame and removed the motor & thermostat together.

Removed the nuts and bolts that hold the 2 halves of the motor housing together.

Separated the motor casing ends the armature then comes out easily, along with the front motor casing.

Since the long shaft was rusted beyond where the fan attaches, I used a bench mounted wire wheel to de-rust it. A rusted shaft won't slide out of the front bearing.

Slid the front motor casing, which contains the front sleeve bearing, off the armature shaft.

Thoroughly cleaned the gunk on the shaft at the bearing locations using a paper towel with paint thinner, along with steel wool. The front shaft on my motor was coated with what looked like tar, which can happen to oil that's repeatedly over-heated. This "tar" retards motor RPM's, making the fan less efficient. Eventually, if it slows the motor enough, a tar build-up could result in a burned out motor. The rear bearing area was much cleaner.

Cleaned the inside of the sleeve bearings.

Oiled the sleeve bearings on their insides and the shaft where it touches the bearings, with synthetic motor oil, since it's slicker and has a higher operating temperature range, than refined oil.

Reassembled the unit mounting the motor so that the shaft was at a right angle to the fan housing. The fan turned much easier by hand than it did before. Electrified the fan for a test run before re-installation, to ensure proper operation.

Summary:

I've disassembled many motors and this is the first one with STEEL versus bronze, sleeve bearings. Broan probably saves two bucks per motor by using the cheaper steel sleeve bearings, and the end result is a motor won't last as long as it would if bronze bearings were used. (I.e., the bearings gum up, at which point, most people would replace the motor.) The steel sleeve bearings are so hard that the motor shaft showed some wear at the front bearing area this is something I haven't seen with bronze bearings, since bronze is not hard enough to wear down a steel shaft.

This "repair" costs nothing and took about 30 minutes. There's no reason it couldn't be repeated as needed.

One star off for Broan using cheaper bearings.

Honest reviews on Attic Fan Replacement Motor

The original motor in the fan lasted for nearly 14 years. My hope is the new motor lasts a similar period of time. Only time will tell.

Find helpful customer reviews and review ratings for Attic Fan Replacement Motor

My old fan was making all sorts of noise and finally just burned out. I ordered this one, installed it and it runs effectively and quietly. I am guessing I will have to replace it in 7 to 10 years but it is what it is.

Buy Fom Amazon Now

Monday, April 21, 2014

Cheap De'Longhi CGH800 Contact Grill and Panini Press

De'Longhi CGH800 Contact Grill and Panini Press
Customer Ratings: 4.5 stars
List Price: $140.00
Sale Price: $60.02
Today's Bonus: 57% Off
Buy Now

I used to be a restaurant owner and chef, serving great toasted sandwiches from several commercial sandwich presses with flat plates and I really missed them after I left the business. After much consideration and reading reviews, I hesitatingly bought this unit due to mostly 5 star reviews. The Delonghi has a nice feature in the temperature control and overall build quality, however after making one sandwich I realized its serious shortcomings which I suspect is common to all grooved griddles.

I do not understand the consumer fascination or hype for grill marks on sandwiches just so that you can get that Italian "Panini" look. Grill marks may look cute but they are a functional waste for a toasted sandwich. The problem is that the deep impression made in the bread causes an uneven heating of the bread surface and ingredients underneath. I made a classic Rueben with rye, big eye swiss, corned beef, kraut and thousand island dressing. The ridges pushed deeply enough into the bread to cause the cheese to melt through the bread where the untoasted surface was between the grooves. So the grooves were toasting but not the between where the cheese soaked through. ALso consider that rye is more dense than typical sandwich bread and it still did not withstand this process. The sandwich ended up a soggy mess within about 3-4 minutes and would not come out of the press very easily due to the deep grooves where the softer bread "gave up" and simply started falling apart from being soaked. So I returned the unit, unsatisfied with the results.

I then promptly replaced Delonghi with my second choice for which I should have trusted my initial instincts. I got the Breville unit because it is about the only one on the market that has flat griddle plates top and bottom for a truly even toasting over the entire surface of the sandwich. The heat level is perfect and the surface area is larger than the Delonghi and it will actually accommodate 4 sandwiches at one time. The bottom plate features a raised lip around the perimeter to contain ingredients that may run out or for cooking meat. You can leave the sandwich in longer than the Delonghi to allow a more crusty surface if desired or more heat to the interior ingredients without burning anything. It is very forgiving on cook time so it would be hard to ruin anything cooked in it. I have also found it wonderful for cooking hamburger patties. And it does it very quickly. A third to half pound pattie will cook in 3-5 minutes, cooking both sides at one time. Not to mention that my Rueben now comes out perfect. I have also cooked Tyson marinated chicken breasts in it, with great results. And will next try sirloin steak cuts, which I am sure will yield excellent results.

The Breville also has a stair step slider lid support on the side handle to allow you to set variable thicknesses for ingredients to avoid smashing your panini or toasted sandwiches to cardboard thin slices of bread. Also allows for great pizza reheating to crisp the crust on the bottom plate and setting the lid to the open "radiant heat" melt position, hovering to warm the topside ingredients while the crust does its thing. All in all, a much superior choice unless you like "tire rut" sandwiches. I am very impressed with this unit which performs as well as the $600 commercial units we used in my restaurant.

Click Here For Most Helpful Customer Reviews >>

This is my first Panini Grill and I wish I had bought it sooner. I looked through many of the Panini Grills that Amazon has to offer and, in my opinion, this was the best. I have now had it for about 2 months, and am probably using it 3-4 times a week.

WHY I LIKE IT:

Using French loafs or Hoagie bread, my sandwiches take about three minutes to make. I turn on the grill while I am preparing the sandwich, and there is an indicator (near the middle of the handle) that lights up when the press has reached your desired temperature (which is controlled by a dial near the handle). Cheese very frequently oozes out, but that's a never a problem with the nonstick surface. A quick wipe afterwards with a damp towel and it is clean.

The ridges on the press are just the right size. Deep enough to make those beautiful grill marks, but not too deep to make cleaning a hassle. The distance between them was just about right too.

The whole press feels very sturdy. I have had no problems with the handle as some other people have. The top part is heavy enough and presses the sandwich firmly. A lot of the other grills (like the famed Foreman) are too light and I worry about their ability to firmly press my food. I haven't used them though so I may be wrong.

It has a "drain" on one corner and comes with a separate cup for catching runoff. I assume this is for grilling meats and catching the oil runoff, but I have not used it for meats. I don't think it is a good idea to use the same surface for raw meat and sandwiches. If you also use it for meat/chicken, make sure you wash it afterwards rather than just wipe it.

It looks great and matches the rest of my stainless steal equipment.

WHAT I WISH IT HAD:

An on-off switch would be so convenient. You have to use the plug. This is the only reason I cannot say this is a perfect machine. I wish I could give 4.5 stars, but four will do.

A smaller price tag

Best Deals on De'Longhi CGH800 Contact Grill and Panini Press

Had the Krups model FDE312-75 for about 3 years before it decided not to turn on one day -so to replace it, thought I'd try something different. Went with the DeLonghi this time, about $20 cheaper. I loved my Krups, and initially thought I'd like the DeLonghi a bit better. Here's my experience:

*Krups always "sparked" at the outlet when I unplugged it. Not so with the DeLonghi.

*DeLonghi has adjustable heat, so, although I only used the Krups for Panini, I'm kind of excited about the options I now have with the DeLonghi. Might try a burger or chicken! It also has a channel where the grease can run off -and a little cup to catch the grease. If you'd ever use the Krups for anything other than a sandwich -the grease would have no where to go.

*DeLonghi has wider channels on the grill plate -which make it a lot easier to clean up. But the panini does NOT get as crispy as it does with the Krups...for specifically that reason.

*The Krups latch, meant to hold the top & bottom together so you can store it on its side, was flimsy and broke after a week. It latched when I didn't want it to -and wouldn't when I did. (A minor thing, but it got to be annoying.) There seems to be no threat of that happening with the big latch on the DeLonghi.

*The DeLonghi is kind of "chunky" -it takes up more space when stored on its side than the Krups. The Krups also has a slightly bigger grill surface.

There's my 2 cents. Happy sandwich-making!

Honest reviews on De'Longhi CGH800 Contact Grill and Panini Press

I'm glad I had previously read a customer review explaining it has no on/off switch. Because an insurance adjuster had explained to me a long time ago that repeatedly pulling an electrical cord out of an outlet while the appliance is on ultimately causes house fires to start at that outlet, I went to Radio Shack and purchased a plug-in, dual on/off switch with outlets (about $7.00). The Radio Shack device's on/off switch lights up when the appliance is on, so you know whether you've turned it off. Otherwise, I love the appliance; my husband uses it frequently to make hot sandwiches, and it's easy to clean with a damp paper towel. Melted cheese turns crisp and comes right off the grill with no problems. It's a great product with multiple heat settings, a "ready" light to let you know when it's reached the desired heat, and my only complaint is that the engineer needs to be shot for not putting an on/off switch on the device.

Find helpful customer reviews and review ratings for De'Longhi CGH800 Contact Grill and Panini Press

I have had my panini maker for a year now, and have used it sparsely, up until now. Since I've been using it more, I now wish it had closer 'ribs', as I think this would cook the sandwiches more evenly and quicker (as in the Krups).

The directions that came with it were not very clear, and the positions of the lid was 'reversed'; I had quite a time getting that clear from the manufacturer. And it was supposed to come with a 'comprehensive' cookbook; the one that I eventually had to send away for was just a small one, not what I had expected. Being a first-time user, I needed all the tips and recipes I could get!

A plus is that it does have variable heat settings.

I wish it had an on-off switch! You have to pull out the cord to cut it off! For something this expensive, I expect better quality!

Also, the locking mechanism that keeps the two parts together keeps locking together when you don't want it to very annoying!

Buy Fom Amazon Now

Saturday, March 22, 2014

Review of Broil King PCG-10 Professional Portable Nonstick Griddle

Broil King PCG-10 Professional Portable Nonstick Griddle
Customer Ratings: 4.5 stars
List Price: $140.00
Sale Price: $99.99
Today's Bonus: 29% Off
Buy Now

I love mine. It's big, so be aware if you have little counter space. I've got five in my family, and this grill is big enough for bacon on one side, pancakes on the other. It's easy to clean. I've had mine over a year, and have had no problems with the finish. Yes, it does have a hot spot on the left side, but I use it to my advantage. I've had some restaurant experience, and our flat tops were almost always at different temps. Something cooking too fast? Move it over! Put those sausages on the right, as it's a little cooler, and they take longer to cook.

I have had one problem: my probe thermostat went. I called the company, they took the date code off the unit (it was a gift from my Amazon wish list!), and sent a new probe out. The warranty was 30 months! Nice.

I say, if you're a heavy duty griddle user like I am, this is the TANK of the griddle world!

Click Here For Most Helpful Customer Reviews >>

Wow. What a great cooking tool. This griddle is tough, heavy, big, and it works great. The flip down leg things work great to help drippings to drain. no wobble with the leg extensions up or down. It's thick so it takes a few minutes to warm up. I turn it on while prepping prior to cooking, so by the time I'm ready to cook it's up to temp. If you turn it on and expect it to be hot in 30 seconds, it won't be. If you're looking for a nice, polished, formal, "display piece" to impress the in-laws or the neighbors, this is not the appliance to purchase. The cast aluminum base has some burr's on the underside from the casting process. To grind them off and smooth it out would add cost, and the burrs don't decrease it's functionality (they're on the bottom!). The "Flimsy" splatter guard works great. it doesn't have to be sturdy, it only has to stop the splatter drops (which it does) thereby keeping my counter clean. the large cooking surface has a FEW minor marks, but nothing sticks to it. I coat it with veg. oil after each use and wipe it off prior to using. No problems yet. no issues with the coating coming off either. My pancakes are always evenly cooked (on a pre-heated griddle) and the long bacon pieces cook evenly too.

It's somewhat heavy. It's big and hard to store. these small issues are totally acceptable given the fact that this griddle cooks great and should last FOREVER. Treat it right, and it will treat you right. If you're looking to cook a big meal on a working, long lasting piece of equipment, this is the grill to get. my family thinks I am now the best breakfast cook. I should have purchased this a long time ago.

Best Deals on Broil King PCG-10 Professional Portable Nonstick Griddle

I purchased this griddle a few weeks ago so that I could finally sit down with my family to for Sunday pancake breakfast, and it delivered I can easily cook eight pancakes at once with flipping room to spare. But the size is only part of the story. The non-stick performance had me a little worried out of the box, as there were some "lines" on the surface that might have been manufacturing issues, but they seemed to just be cosmetic after some cooking they've faded, and the non-stick performance (new) is simply outstanding easily matches my good All Clad cookware for pure non-stick goodness and simple cleanup.

Another thing I really appreciate is how even the cooking temperature is. There are simply no hot spots on this thing, and if I really, really want to be picky, the temperature might fall off a bit at the very edge, but cooking eight pancakes gives me a great visual indicator from edge-to-edge, front-to-back, and there were simply no pancakes that had appreciably different cooking from each other. I both amazed and pleased.

The size makes this something that can be tricky to store we have an entire double-width cabinet dedicated to just this and my big electric skillet, and we have to tilt the griddle a bit to make it all fit. It's too deep to fit if you turn it perpendicular the cabinet door won't close all the way. So, be prepared to work a bit to find a place to store it.

But as a workhorse for a serious breakfast cook, I think this guy's a winner.

-------------------------

UPDATE UPDATE UPDATE January 2011

After living with this griddle for quite some time, I wanted to mention something I've run into. I still think this is a great griddle the even heating across the board is amazing, the temperature control is great. But and this is because I add a very thin coat of oil for browning my pancakes the non-stick surface gets a sticky residue that is T-O-U-G-H to clean off. I've tried just about everything, and so far, a paste of baking soda and water and plenty of elbow grease gets off most of it, but not all. I'd still recommend this griddle strongly, and the non-stick surface is holding up wonderfully even after many uses, but it's something to be aware of. I am sticking with the 5-star rating, however, as this griddle is still a winner.

-------------------------

UPDATE UPDATE UPDATE January 2012

Wow another year! This grill is STILL going strong, and making 8 big pancakes at a time many weekends. I've also used it for mass cooking grilled cheese sandwiches, yum. I have NOT used it for, say, grilling burgers, but as a pancake maker it continues strong going into its third year. I've just learned to live with the weird residue, and I guess the good news is: it's not building up and building up, but rather just got established early on and seems to stay about the same.

-------------------------

UPDATE UPDATE UPDATE January 2013

Yes! Today is our annual family New Year's Pancake breakfast, and so of course I thought I would update my review: YES it's still our favorite breakfast making monster machine. I use it pretty much exclusively to make pancakes and toast sandwiches, and it continues to excel. I have never quite learned the secret to remove the "build-up" of oil on the non-stick surface, but it doesn't seem to affect the cooking ability, and clearly it's held up after three full years of use, and we are now starting year 4. It's still a 5-star griddle in my book. The ONLY wear I've noticed is that the plug socket has darkened over time from the heat. The non-stick continue to work perfectly. Recommended.

Honest reviews on Broil King PCG-10 Professional Portable Nonstick Griddle

My 32 year old Miracle Maid griddle finally gave up the ghost. I tried my daughter-in-law's griddle but it was a mess. The pancakes stuck and it was a bear to clean. I went to the Cook's Illustrated site and found this one rated highest among the ones they tested. Well, I am so pleased with it. It cooks at an even temperature, it is easy to wash and it is large enough to cook eggs, bacon and pancakes all at once. It is a little pricy but so worth the cost. I recommend this product.

Find helpful customer reviews and review ratings for Broil King PCG-10 Professional Portable Nonstick Griddle

I decided to review this griddle after making breakfast this morning. I've owned it for over two years, and every time I use it I remember how glad I am that I bought it. I bought it after owning quite a few griddles, and being really happy with none of them. I was definately influenced by Cook's Illustrated, and I'm glad I was. This griddle ROCKS:

I never have to oil it to make pancakes and the non-stick coating has held up really well with lots of use.

It cleans up like a dream............WAY better than the other grill's I've owned.

It gets up to temperature quickly and stays there.

I NEVER waste the first batch of anything cooked on it. It cooks extremely well from first to last batch.

You too won't be sorry if you buy this griddle. It's worth every penny, and then some.

Buy Fom Amazon Now

Wednesday, March 5, 2014

Holmes HCT460-U Home Base Transformable Tower Heater Reviews

Holmes HCT460-U Home Base Transformable Tower Heater
Customer Ratings: 3.5 stars
Buy Now
Just bought this unit. The design is quite nice as far as being able to rotate the vents and the flexibility to have one down, one up, both down or both up. You can set the desired temperature, but you should know that you can only set it to 60, 65, 70, 75, or 80. That's it. Nothing in between those. The main problem I have with this unit, and it is going back tonight for a replacement, is that my room is 64 degrees, and the unit won't go on until I set it to 75. And even at that, it shuts off after the room gets to about 65 or 66. To me, it seems like the thermostat is off by about 10 degrees.

Click Here For Most Helpful Customer Reviews >>

The thermostat never works. It won't turn on no matter what temperature is set. Asked Amazon for a replacement. The replacement was even worse. Thermostat was off more than 10 degrees, plus one of the towers was broken. Had to send it back for refund. The only good thing is Amazon's service.

Best Deals on Holmes HCT460-U Home Base Transformable Tower Heater

it is effective and somewhat stylish. however, it severely dries out the air, and leaves a twinge of plasticity in the air... not recommended for a bedroom (which I tried first) but will work in a draftier setting, like a living room or garage...

Honest reviews on Holmes HCT460-U Home Base Transformable Tower Heater

I purchased this product a year ago and it has worked wonderfully in my finished basement. It keeps the whole room heated very well if I leave the door to the upstairs closed. Guests really appreciate the warmth since the basement traditionally is very cold.

We're now using it at our office because of the very cold weather and it's doing a great job keeping the heat even throughout the back of the office (and I sit next to a large drafty window).

I don't have any problems with the temperature. Our office stays steady at 74, except in my area, but I can set it to 75 and the temp feels like the rest of the office.

I also have very dry hands in the office and I feel no difference when this heater has been used the past two days here. Everyone in the office has been raving about the awesome design and the output it generates.

I think it is well worth the price!

Find helpful customer reviews and review ratings for Holmes HCT460-U Home Base Transformable Tower Heater

I really ehjoyed this heaterm not only warm and cosy bur oh so safe. I would buy again it was a cool product

Buy Fom Amazon Now

Friday, February 28, 2014

Sunbeam Reversible Sherpa/Mink Throw Blanket Reviews

Sunbeam TRT8WR-R310-25A00 Reversible Sherpa/Mink Heated Throw, Garnet
Customer Ratings: 4.5 stars
List Price: $84.99
Sale Price: $59.36
Today's Bonus: 30% Off
Buy Now

Got this gift for my mom for Christmas and she has not put it down. She was blown away by this blanket. When she unwrapped it initially she was in love with it because of how soft this blanket was. It was only after I told her that it was also heated that she nearly lost it. She brings it into every room she goes in and is always near it. The automatic switch off after 3 hours is great for saving power as well. If you expect this item to be EXTREMELY warm (about as warm as a heating pad) then you're wrong. This isn't made to do that, but it will warm you up no matter how cold the night gets. Strongly recommend this item, it's exceptional in it's design and function and for the price, this gift is VERY worth it. I hope you buy it and I hope the person you get it for loves it as much as my mom does already.

Click Here For Most Helpful Customer Reviews >>

I chose this blanket for my mother. She uses it daily. Love the textures and the thickness. Very plush on Sherpa side,

Best Deals on Sunbeam Reversible Sherpa/Mink Throw Blanket

I have Fibromyalgia. This comforter is warm and fluffy. The heat is nicely distributed. It doesn't bind. I could wish they would come up with a remote control instead of all these wires, but they are all that way.

Honest reviews on Sunbeam Reversible Sherpa/Mink Throw Blanket

this is great ! If you are a little cold when sitting, this just what you need. Real plush covering. I am thinking about buying another one (got this for the wife).

Find helpful customer reviews and review ratings for Sunbeam Reversible Sherpa/Mink Throw Blanket

Been using for a couple of months now. Great for the couch. Also took it with me to the mountains to warm up the bed in the cold rental cabin. Delivered on time and as described.

Buy Fom Amazon Now

Tuesday, February 4, 2014

Best Robertshaw RS4110 Heat Pump/Single Stage 1 Heat/1 Cool Digital Deals

Robertshaw RS4110 Heat Pump/Single Stage 1 Heat/1 Cool Digital Non-Programmable Thermostat
Customer Ratings: 5 stars
List Price: $64.46
Sale Price: $36.08
Today's Bonus: 44% Off
Buy Now

Keep it simple stupid has it's merits. This t-stat is just that. I love the back-light that stays on all the time if you set it that way.

I needed a t-stat with adjustable differential and this unit has it.

Easy to read, set, use... Great buy and easy to install.

Click Here For Most Helpful Customer Reviews >>

I broke my Maple Chase thermostat trying to change the fuse and discovered this replacement by Robershaw. If you follow the installation instructions precisely, it works beautifully. I did not have one wire correctly placed at first because I am an idiot and did not move it to the other side of the board to match the color/description. Trouble shooting tips said to look at the wire placement and sure enough I discovered what I had done. As soon as I moved the wire connection, it took off and has worked precisely as described. I never programmed the Maple Chase for 40 years, so I got the the simple one from Robershaw and I am glad that I did. You will like how it lights up when you change the temperature. Neat replacement and priced right too!

Best Deals on Robertshaw RS4110 Heat Pump/Single Stage 1 Heat/1 Cool Digital

I bought this product because it is one of the few thermostats that allow you to set a temperature differential, controlling when the furnace turns on and off. This is especially handy when you have a furnace that cycles frequently when there are small changes in temperature. I own a cabin that is not well insulated and heat loss in the winter occurs faster. My old thermostat would kick on the furnace when there is a slight change in temperature, less than 1 degree. Most common thermostats you buy at the hardware store, do not allow this function. With this thermostat, you can set the exact temperature difference. In my case, I have the difference set at 2 degrees. So if you have the thermostat set to 70, then it will not cycle until the temperature reaches 68. It will heat to 70 and repeat the cycle! This reduces the number to times the furnace has to cycle. It works with heat/air and was easy to install. Excellent product!

Honest reviews on Robertshaw RS4110 Heat Pump/Single Stage 1 Heat/1 Cool Digital

only thing holy cow giant instructions if you dont know what your doing you need help lol other then that awesome

Buy Fom Amazon Now

Sunday, February 2, 2014

Skytech 3301P2 Programmable Fireplace Remote Control Reviews

Skytech 3301P2 Programmable Fireplace Remote Control
Customer Ratings: 5 stars
List Price: $249.00
Sale Price: $184.01
Today's Bonus: 26% Off
Buy Now

I bought this remote to replace the original remote I had with my fireplace around 7 years ago. My old one was having wiring issues. The Skytech remote was VERY easy to install and use. I really like the backlit LCD screen. Works great and has a nice wall mount. Very light weight and I have not had any problems with it interfering with our wireless network. It is programmable or just set it to a temp you want and it works great! No complaints.

Click Here For Most Helpful Customer Reviews >>

Works GREAT!! Easy to install, works flawlessly. Now we no longer have to bend over, press the Pilot button to light our stove, just simply sit back, press the button and WOOSH.

Best Deals on Skytech 3301P2 Programmable Fireplace Remote Control

I primarily have used it like a thermostat. Before installing the Skytech the only control was a simple switch on the side of the gas fireplace insert. If I didn't pay close attention the room would get way too hot. Now the Skytech cycled the gas on and off to hold a steady temp.

We keep the furnace set much lower now and just heat the great room we occupy the most.

Honest reviews on Skytech 3301P2 Programmable Fireplace Remote Control

I hooked this up to my Quadra-Fire Classic Bay 1200 Pellet Insert. It took me 10 minutes to install, and it works perfectly. If you are looking for a high quality programmable wireless fireplace remote for your pellet stove, this is the one to get! You will be very happy with your purchase, it's excellent and provides everything we were looking for.

Find helpful customer reviews and review ratings for Skytech 3301P2 Programmable Fireplace Remote Control

Product came with receiver and transmitter....and even batteries, although the two AAA batteries were too weak to use. This caused alittle anxiety as I first thought the transmitter wasn't working! Alas, I replaced the "new" AAA batteries....whua, lah...the unit worked perfectly. Packaging and delivery was great....keep up the good work!

Buy Fom Amazon Now

Sunday, January 19, 2014

Lasko Products Cyclonic Ceramic Room Heater Reviews

Lasko Products Cyclonic Ceramic Room Heater
Customer Ratings: 4.5 stars
List Price: $199.00
Sale Price: $88.94
Today's Bonus: 55% Off
Buy Now

I love this space heater, because of the great design and great performance. You can put it against the wall without worries about it getting too hot. It will heat an average size room 12X12 quite quickly. it's quite energy efficient as well.

Click Here For Most Helpful Customer Reviews >>

It does the job, but when I use it on high setting longer than 30 mins or so, the cable starts to get warm on several spots. The cable looks cheap and nondurable, I wonder if it would melt or cause fire hazard if I leave it on longer. Lasko's several previous models were recalled for a similar reason, that's why I am worried. I am thinking about returning the unit.

Best Deals on Lasko Products Cyclonic Ceramic Room Heater

I tried a oil filled heater and returned it becouse of a sickning smell coming from it, then i tried a fan heater and it did not do the job for my large livingroom/diningroom/kitchen (all open)I went and got this heater and wow is all i can say, it took trial and error with other brand heaters but this one is great, i highly recommend this heater, it is safe and really throws out some heat! I live in philly and it gets cold in my old house, but this is keeping my living area toasty!

Lisa

Honest reviews on Lasko Products Cyclonic Ceramic Room Heater

I am very pleased with this product. It is quiet and gives good heat in my basement den area.

Find helpful customer reviews and review ratings for Lasko Products Cyclonic Ceramic Room Heater

This heater is one of a kind!! I wish that I could have found one like this several years ago. I love it and will end up buying another one. I love it!!

Buy Fom Amazon Now

Saturday, December 28, 2013

Buy Venstar Add-A-Wire 5 Wire to 4 Wire Adapter

Venstar Add-A-Wire 5 Wire to 4 Wire Adapter
Customer Ratings: 4 stars
Buy Now
If you read this review and decide this product is not for you... that's reasonable. If you blindly order this product, never even try to install it, and then leave a negative review... that's profoundly unreasonable. I was almost dissuaded from this item based on a prior review even though that review was beyond useless, the product is exactly what I needed, and I have never seen anything else like it. This product offers an ingenious solution for my problem (not enough wires from thermostat to HVAC system), it was easy to install (with some basic knowledge I have no HVAC training beyond what I found on "The Google") and it works. 5 stars.

As some background, let me say I'm not even a particularly good handyman... I have a drill and not much else for power tools. But to make up for any lack of knowledge/skill, I have an over abundance of confidence and access to the internet. You can decide if that makes me wise or a fool, and whether you trust this review. I am sure this installation carries risks I am not even aware of. You assume all risks and are responsible for any damage/injury/death/electrocution/fire/etc.

To start, I was short on wires after I installed programmable thermostats. The original house wiring had 4 wires to the HVAC, which was sufficient for the original heating/ac thermostats since they were battery powered and didn't need HVAC power (they used: red wire for hot voltage, white wire for heater, yellow wire for cooling, and green wire for fan control). Unfortunately, programmable thermostats generally require external power (usually from the HVAC), meaning they need a 5th wire for ground. I tried switching the wiring at each season change (kept one wire for hot voltage, one wire for GROUND or common, one wire for fan, and then I would need to connect the last wire to either cooling or heating but not both). This turned out to be a real PITA here in New England, where one day it's 90+ and I would have to rewire for AC and the next day its 50 or below and back I go to disconnect the AC and connect the furnace...

This product is designed perfectly for the above scenario. It could also be used to bypass a broken wire or for certain other situations where you need one more wire. What you get is some passive element to combine two wires into one at the level of the thermostat, and then an adapter that installs at the air handler to separate the combined signal back onto two wires. My guess is that it is using voltage to multiplex the signals. For example 0 volts means both wires are off, 12 V means the fan wire should be on only, and the full 24V means both fan and AC wires should be on. Then the signals are demultiplexed at the air handler. That's a guess, but it makes sense to me. This assumption also explains the stated limitations... you can't use either the hot (red) or common lines for any combo since they must always be fixed at 24 and 0 volts. Also, I suspect one of the combined wires will become unable to activate alone (not a problem if it's the AC wire, which you would always want running with the fan... but don't wire backwards so the fan can only run with the AC on...)

As noted, there are some other limitations with this scenario, but fortunately for the 4 to 5 wire conversion you wouldn't notice (described below). If you are going from 2 to 3 wires the limits become more significant, see the documentation on the Venstar website for details. In my scenario, I combined the yellow (AC) and green (fan control) on one wire, thus allowing the thermostat to control everything with just 4 wires instead of 5. It works flawlessly. I can turn the fan on alone. I can turn the heat on alone (or with the fan). I can turn the AC+fac on. As noted, I don't think I can turn the AC on without the fan, but why would I want to? And the best part... NO REWIRING for heating or cooling!! So far, no bugs to report but it takes maybe 15 seconds for the furnace or AC to kick in when the thermostat triggers. I'm not sure if that was always the case, or if the add-a-wire somehow introduces some minor lag time.

Now for installation. Be SURE that your system is 24VAC. I'm not sure if there are other voltages out there, but if this product works the way I suspect, it would probably fail spectacularly at any non-standard voltage. Tools required are screwdrivers (possibly including a jewelers screwdriver). You need to be able to open you air handler (in my case it's just two thumbscrews on a back panel of the furnace though that did require fighting through some cobwebs and dust). You ALSO need to get behind the thermostat to the wiring (usually the thermostat face plate just comes off). Like I said, you have to install parts at both ends of the wire (duh...). The package comes with 2 wire nuts, which should be enough. Also, be sure you've turned off the furnace power when doing this... again, I'm not sure if 24VAC is really that dangerous but you certainly don't want to find out... The wiring is pretty straightforward from the instructions in the box (see the Venstar website for PDF). If you can't figure it out from the pictures, you probably shouldn't be messing with this. Installation took me an hour, but as I said above I'm really not much of a handyman. It took me 10 minutes to get the thermostat panel off the wall and another 10 minutes just to find the air handler... If I did this again I think I could do the whole thing in 10 minutes total. Make sure you know the wiring color codes, which are readily available on The Google... you don't want someone else to come along and accidentally find out you used yellow for 24VAC power.

So in summary... it worked, it saved me a lot of pain and cost (of running more wire), and it was very easy to install with knowledge gained from The Internets. I suppose you could ding it for being expensive (the actual parts probably cost the company only a few bucks at most) but it was well worth the price to me and there are no alternate products that do this, as far as I know.

Click Here For Most Helpful Customer Reviews >>

This product looks like a really great device it does what it says but requires access to your air exchanger and some technical knowledge that may not be something everyone has or can understand.

Best Deals on Venstar Add-A-Wire 5 Wire to 4 Wire Adapter

this thing works exactly as advertised. The reason I gave it 4 stars I stead of 5 is because I feel the instructions for installation could be better. But a quick google search gave me the info I needed to complete the installation. I would strongly suggest googling for an installation video. There are a couple out there that makes the installation of this a snap. This is a great product that makes conversion to a 5 wire thermostat a snap.

Honest reviews on Venstar Add-A-Wire 5 Wire to 4 Wire Adapter

Radi kako je receno kome treba nek sebi kupi nece biti od viska kad bude pravio termostat u kuci i

Find helpful customer reviews and review ratings for Venstar Add-A-Wire 5 Wire to 4 Wire Adapter

I'm not a wiring guy, and installing the Venstar T5800 thermostat was not in my DIY skills. Wiring is never what the basic instructions say it is. Bought this on the chance that I'd need this, and didn't want to have the contractor come out twice. In this case, I didn't need it, but I'm not sorry. Gave it to the contractor.

Buy Fom Amazon Now

Sunday, October 27, 2013

Reviews of LG Electronics LW1211ER 12000 BTU Electronic Air Conditioner

LG Electronics LW1211ER 12000 BTU Electronic Air Conditioner with Remote
Customer Ratings: 3 stars
Buy Now
I selected this model after reviews (Consumer Research) gave it a "Best Buy" rating for cooling larger rooms. The review also noted the difficulty with installation, which I also found problematic. The manual has ambiguous illustrations and poorly written instructions. After two-hours of trying to get the chassis frame installed in an upstairs window and inserting the main unit, it would not operate. The fan shaft was separated from the housing. I should have noticed something askew when I found small pieces of black plastic inside the unit along with machine screws around the compressor. The front grill fits very poorly and if not for a single, center-mounted screw it would fall off completely. Fortunately, it was quickly and cordially exchanged. Now that it has been "up & running," it is quiet and efficient, especially in the energy saving mode. Overall, the quality of the workmanship is inferior (Made in China), the instructions are meager, and the installation is challenging. If you decide to purchase this AC, I'd recommend removing the four screws securing the main unit, sliding it out of the chassis, and inspecting the interior for damage as in my opinion it is not well constructed and potentially at-risk for damage during shipment.

Click Here For Most Helpful Customer Reviews >>

I just walked out of Home Depot with one of these for $300, drove home lugged it inside and installed it myself in 20 minutes. The instructions are poorly written and the illustrations are small and obscure, but there's basically only one way things can fit together and it works out fine. The metal screws are tight-fitting and you'll be glad to have a cordless driver for the assembly. Otherwise it's pretty easy and with the outer case removed, the guts of it are light enough to lift up and slide into frame. Be sure you have each part in the proper orientation before tightening the screws. The unit seems quiet when switched on but that's based on the first 20 minutes experience. The plastic front grill is floppy and flimsy but I don't care.

Best Deals on LG Electronics LW1211ER 12000 BTU Electronic Air Conditioner

We have this AC for about 2 years now and we are still very happy about this AC. The installation was not difficult at all, and it was up and running beautifully after half an hour. It is very heavy and big, so it took 2 people to get the job done. Our apartment is a 800 sqf loft space. With a small fan in the far end of the room to get the air moving a little bit, it cools the whole place nicely. At first we thought the electricity bill will be very expensive, but it's actually lower than we expect. We also use curtains to block the windows during the day, and it helps to keep the room cool and cut the energy usage.

Honest reviews on LG Electronics LW1211ER 12000 BTU Electronic Air Conditioner

Out of the box and no cold air. Exhausted 3 hours of phone time with tech support, which is terrible. Most of the customer service reps barely speak English, and only read from the sheet in front of them.

A real question 10 minutes into a conversation: "Is it plugged in?"

Terrible. Returned for a Frigidaire.

Never going to buy an LG product again. If the customer service is that bad when something isn't working, I don't want to roll the dice on having to ever call them again.

Find helpful customer reviews and review ratings for LG Electronics LW1211ER 12000 BTU Electronic Air Conditioner

I bought the LG 12,000 BTU air conditioner at Home Depot. The reviews say that it's difficult to install. That, in my experience, isn't exactly accurate. Yes, the instructions are not great. Any person who is handy with tools and good at working around the house wont have a problem with the installation of this unit.

It is a shade heavy but, you install the outer case first, then slide the actual AC unit into the case. So, it's not bad and, your getting 12,000 BTU's. What do you expect?

This unit makes cold air really well. The fan runs and like all AC units, the compressor cuts in and out as needed. Mine seems a bit louder today than it was last night when the compressor cuts in. I'm not worried about it. It's a small vibration sound. As long as it's cooling I don't care. It's still not loud, making less noise than a box fan.

All in all, it's a good air conditioner (so far). And, when your hot and uncomfortable it's a real sweet deal.

Buy Fom Amazon Now