Showing posts with label ip controlled thermostat. Show all posts
Showing posts with label ip controlled thermostat. Show all posts

Monday, October 13, 2014

Discount DuroStat Portable Waterproof Prewired Thermostat

DuroStat Portable Waterproof Prewired Thermostat
Customer Ratings: 4.5 stars
List Price: $87.44
Sale Price: $69.95
Today's Bonus: 20% Off
Buy Now

This fine by me

I could not prove it, but I need to turn the fans

This product meets my expectations, I have to wait a while in order to test how good and tough is the product of another brand I have other very similar but the cable is damaged very fast

Click Here For Most Helpful Customer Reviews >>

Does exactly what it's supposed to and does it well. I would purchase this item again.I use this in my greenhouse to heat and/or cool it.

Monday, September 1, 2014

Saturday, August 9, 2014

Dual Digital Display PID Temperature Controller. Great for Sous vide Reviews

Dual Digital Display PID Temperature Controller. Great for Sous vide
Customer Ratings: 4.5 stars
Buy Now
The manual can be found at http [colon slash slash] [slash] JLD612_Manual.pdf

Given that I found the manual I had no trouble connecting the 25A SSR Solid State Relay DC:Input AC:Output for PID Temperature Controller and I even used the Heatsink Heat Sink for 25A Solid State Relay (SSR) which is tapped for metric screws, available at ace. I am using the K thermocouple and I had to use the programming adjustment to square the built in display with my Taylor 9842 Commercial Waterproof Digital Thermometer which I decided to trust more than my other digital thermometer.

I inserted the PID/SSR into the black wire of an outlet strip, so that the switch on the outlet strip and the SSR can both turn off the heating elements. I stripped the white wire without cutting it and wire nutted a pigtail on which I hooked to terminal 2, then I cut the black wire and on the hot side I put on two pigtails, one to terminal 1 of the pid, the other to one side of the SSR's AC side. Then I wire nutted a pigtail on the side of the black wire closest to the outlet strip, and attached that pigtail to the other side of the SSR. I even made pigtail color match the hot/neutral black wire/white wire. I didn't touch the green wire at all, if the wall socket is grounded the outlet strip is grounded.

I used yellow/blue to attach the low voltage SSR control circuit, I read somewhere that those are colors used for things that are polarized DC when there is AC around too. Probably just junk, but I didn't want to use any of the regular 110 volt colors like black, white, green, and red (alternate hot I think).

I was sort of surprised that anyone had trouble with the SSR hookup, there are labels on two sides of the device that describe all of the outputs, the SSR output is clearly labeled, if you just attach + to + and to it works. The default setting is for SSR output and according to the manual, for the P100 thermistor, although mine came programmed for a K (maybe because I bought a K at the same time).

There was no wiring diagram in the manual, but they note that there is no polarity for 1 and 2, that there is no resistor unless you have a P100 in which case the resistor is in the thermistor, that the internal relay can take 3 amps at 220 volts. Again, just match plus on the thermocouple to plus on the PID and ditto for minus. If you just want this device to be a temperature excursion device (like to warn if a fridge gets too warm or too cold) you set outp to zero and control the alarms with ah1, al1, ah2, al2. In that case, SSR pins are not used at all, the alarms are controlled by relays J1 (normally open OR normally closed) or J2 (normally open only).

If your heating element for sous vide is small enough that you can use the internal relay you get only one alarm controlled with ah1/al1 and the alarm is reflected on J1. J2 is set with the SV front panel temp. For that mode, you set outp to 1.

Setting outp to 2, the default, gives you two alarms, ah1/al1 controls J1 which has normally open and normally closed settings, and J2 controlled by ah2/al2. SV controls the SSR outputs.

I am not sure I have any use for the alarms at all.

To access the basic settings, set, then set the "pass" to 0089, then set again.

To access the PID parameter setting mode, set, pass 0036, set again. But those parameters are set by using auto-tune.

To access the temperature mode to set target temps for the alarms and the sv setting, set, pass 0001, set.

One thing I like about this device is that it is self programming. I didn't know how to set pid parameters and really didn't want to learn, but you push right arrow until AT lights, and it takes the PID through a couple of learning cycles to learn how much and how quickly the device heats and cools and then it sets the PID parameters for that combination of device and heater. The overshoot is a couple degrees during learning. Takes about 20-30 minutes but that is dependent on overshoot and cooldown rate, and you would probably need to do this for any new combination of container and/or heating element. If you are using an immersion heater to heat water in a cooler, say, it should be way different than if you use a rice cooker's internal heater. Once the PID parameters are set it comes up to temp without overshooting. I would not want to listen to a mechanical relay with this, it flashes power very often, although I see that can be controlled at the expense of some stability.

I doubt it could hold temp within a degree without the learning cycle. I am cooking eggs for the morning (I guess that is the first thing almost everyone sous vides and after some web searching, we decided on 142 for however long but at least four hours.) I just checked it and it was at 141, trying to gently push back to 142. After about a minute of gently increasing the pulsing proportions, it managed to get it up to 142 without overshooting.

My plan is to use a small rice cooker for anything that fits into it, and something larger (bus pan and corner attachment with dangling immersion heaters, or a big stock pot with dangling immersion heaters) and I would probably want to write down the parameters for the rice cooker before switching to the stock pot. The immersion heaters are probably a bad idea, I should just get a bucket heater but the cool thing is that the scheme of putting the outlet strip on the pid allows me to plug in whatever I want, so I can switch between heating devices easily. But I could read the parameters from the pid and write them down. That would allow me to put those parameters back into the PID so that I would not have to allow the PID to go through another learning cycle. The procedure is in the manual.

Click Here For Most Helpful Customer Reviews >>

I purchased this controller to use for a sous vide water water oven along with 11-1/2" Water Heater. Instructions are lacking. After much headache trying to set up an external relay, I found it much easier to use the internal relay on the controller, even though it's only rated for 3 amps. I am very pleased with its accuracy (using a PT100 thermocouple it reads to 0.1 degree F or C accuracy) and the stability of its auto-tune feature (it's able to hold within 0.5 degrees F for at least 3 hours). If the instructions weren't so vague it would have been perfect . I'd definitely recommend this to anyone wanting to DIY a sous vide controller, but experience with electronics is a must!

Best Deals on Dual Digital Display PID Temperature Controller. Great for Sous vide

It is a great PID but it would be good if you send the manual and wiring diagram with the product.

Honest reviews on Dual Digital Display PID Temperature Controller. Great for Sous vide

Perhaps I'm the only one that did not know this, but the red wire/spade connector on the pt-100 probe does NOT go to the terminal on the controller marked + (terminal #9). Red is not positive in this case!

The red wire on the probe goes to terminal #8 (resistor).

The other two wires go to terminals #9 and #10.

Took me several tries to figure this out. Perhaps this will save someone a little time troubleshooting the EEEEE error message the controller displays when the red wire is not connected to terminal #8.

So far the controller seems to work just fine. I'll try to update this review when I have used the Sous vide cooker I'm building for a few months.

Find helpful customer reviews and review ratings for Dual Digital Display PID Temperature Controller. Great for Sous vide

I purchased a JDL612 controller, Thermocouple and SSR to try my hand a Sous Vide cooking. I set up a prototype system, Programmed it to the manual (and lots of links on the internet), connected it to a water bath in my Slow Cooker, set it for 130 degree F (SV) and put it into Learn Mode. It heated up through 160 F (PV) and was still climbing. I took it offline and double checked all my program and electrical connections, everything was correct. I tried it again (With cold water) and the same thing happened. This time I noticed that the OUT light on the front of the controller was OFF but the lamp on the SSR was still ON. I tried several other programming and Set Value changes to the same result. The lamp (OUT) would respond properly but the SSR stayed ON. There was 8.1 VDC coming from the controller at ALL times. Should have been 0 or close to 0 when the OUT light was OFF.

I set the perimeter (outY=0) which should have disabled the SSR output, and it was still staying ON.

I have requested a replacement from Lightobject.com through Amazon but haven't heard anything back from them yet (approx 2 days now). I think the unit is defective but with all the good reviews I'm willing to give them a second chance.

I'll keep you updated.

2/2/2013 I received a replacement controller and the new unit corrected the SSR Stuck on problem. The replacement unit is now capable of controlling the Temperature to the Set Value. I still need to work on the PID perameters a little ( The SV=100 and the PV=99 ) after Auto Tuning.

I upgraded the rating to 4.5* from 1*.

Buy Fom Amazon Now

Wednesday, July 30, 2014

Buy Rival Hot Pot Express

Rival Hot Pot Express
Customer Ratings: 3 stars
Buy Now
I've had this electric kettle for several years, specifically for the use of boiling water for tea. It has very basic functions warm or boil just add your water to the desired measuring line marked on the inside of the unit, plug it in and wait. The construction is sturdy and well-made. I think it's a great product for what I use it for. My only complaint is that it doesn't have a light to show you that it's on or an auto-off feature. If you forget to unplug it, the unit stays hot which is why I gave it 4 instead of 5 stars. Other than that, I highly recommend this product.

Click Here For Most Helpful Customer Reviews >>

Perhaps you had a faulty item, bulmabriefs144? I had the fortune of having a friend with this particular teapot during my first semester at school, and am now quite happy to have one of my own. I have found that it does indeed heat the maximum volume of water at a higher speed than a microwave, and is ideal for making things like pot noodles and cup soups.

I've never tried it with leftovers, but if you wish to boil water, this inexpensive teapot is more than worth the scant few dollars you pay for it. The design could be more attractive, but over all this is a functional product.

Best Deals on Rival Hot Pot Express

I must say that for the price, this is a very versatile item. I actually figured out how to cook spagetti in it. First you boil the water, then put in the pasta. Set it to the warm knob until tender. And you can also heat up your sauce. A real lifesaver on weekends when the university cafeteria was closed =-). I was really sad when it stopped working, but it lasted me through my first year, until I moved out of the dorms.

Honest reviews on Rival Hot Pot Express

My 90-year-old dad has this pot, and I'm getting him a different one, ASAP! The lid falls off when the pot is tipped up to pour out the last of the water, which is certainly a hazard. Holding the lid on isn't advisable, either, because it heats up along with the water, and becomes too hot to touch. Worse, even with the lid on "securely", steam excapes and burns your hand as you pour. Add to that the health concerns about ingesting anything cooked or heated in plastic. My recommendation: Stay away from this one!

Find helpful customer reviews and review ratings for Rival Hot Pot Express

I was making a cup of tea this morning to soothe my sore throat during these winter months, and I had a sudden revelation: I have had this hot pot for over ten years now, and it has never failed me. I often look at product reviews for items before I buy them, and I'm usually skeptical because one never knows how long a reviewer has had the product. "Sure it's cheap, but how long will it last me?" I often think. I felt compelled to share my wonderful experience with this basic item.

I purchased it in August of 1999 before going to college. It served me well on many drunken nights of making cup of noodle, ramen, and the like. I used it purely to boil water, and also to cook the ramen in the hot pot itself. As the only Brit in my dorm, it was also a great way for me to make tea without having to trudge over to the dining hall. Since then it has moved 4 or 5 times with me, never getting damaged. It's tough. I still use it for ramen when I need a quick food fix, I use it several times a week to make tea, or if I'm boiling water for jello.

It heats water quickly (I turn it on while making lunch for work, and it's ready in a few minutes), the lid clips on nicely, it's easy to clean. I honestly can't think of any complaints I have with this item, and for the $10 or so that I paid for it back in the day, I struggle to think of any other cheap, basic item that I've had this much success with.

Buy Fom Amazon Now

Monday, July 21, 2014

Review of RoadPro RPSL-681 12V Direct Hook-Up Ceramic Heater/Fan with Swivel

RoadPro RPSL-681 12V Direct Hook-Up Ceramic Heater/Fan with Swivel Base
Customer Ratings: 3 stars
Buy Now
Just installed one of these in my John Deere Tractor cab, and am pretty disapointed. I have seen these advertised as both 300 Watts and now Amazon is listing them as only 180 watts???? So am not sure if there is two models of this or not??? I bought it because of the review on here from the guy with the skid steer praising it??? I found mine will take 20 mins to defrost[about a foot square hole NOT the whole thing] the windshield if its ZERO degrees here in Northern Maine. I dont really know what it would be good for???? I would say it would be something that would heat up an area maybe 18"X18" square not the cab of a tractor, that is more like 4ft square. If you think it will heat up a vehicle anything like the vehicle heater, you are going to be very disapointed. As it's output is about 1/10th of that.............. I would not have bought it if I could have pluged one in before I bought!!! Maybe a better way of rating it is that a standard hairdryer[1500wt] will put out atleast times what this does; if you have a 300watt version; the 180watt version, they are selling now, would only put out than a hairdryer. So if you think about how long it would take to heat up the vehicle with a standard hairdryer and then assume it will take 8X longer you can see it is going to take a very LONG TIME!

Click Here For Most Helpful Customer Reviews >>

This heater is a marked improvement over the 12v ceramic defroster type heater (powered by a cigarette lighter receptacle) tha I had installed. The unit wires directly to the battery with thicker gatuge wire. Alternatively, it can be wired to the main bus bar which is the case in my boat. The heater warms the cabin of my BellBoy classic glass cruiser. So, I am pleased with it and would recommend it for similar small-spaced applications.

Best Deals on RoadPro RPSL-681 12V Direct Hook-Up Ceramic Heater/Fan with Swivel

I liked the size and the features, but the fan is very lacking and without a switch in the circuit the fan's power stays on unless you remove the fuses. All in all it kept me from freezing too much but could have been made a lot better.

Honest reviews on RoadPro RPSL-681 12V Direct Hook-Up Ceramic Heater/Fan with Swivel

I bought this heater because, at the time, it was the best rated car heater on Amazon. The fan barely blew any heat out. I had to keep my hands directly over the heater to feel any heat at all.

After owning this heater for about two months, it caught fire in my Jeep I had to get rid of it. I would not recommend anybody purchase this heater.

Find helpful customer reviews and review ratings for RoadPro RPSL-681 12V Direct Hook-Up Ceramic Heater/Fan with Swivel

I have this unit installed in my Subaru wagon. Forget about getting any heat. Turned to the windshield, it keeps a small portion of the windshield clear of condensation. Thats all it's good for. Hardly any heat, hardly any moving air from the fan.

An impressive looking gadget; but not really a heater. Not worth 50 cents.

Buy Fom Amazon Now

Wednesday, May 28, 2014

Best Dimplex CFP3920BW 20-Inch Electric Fireplace, Burnished Walnut Deals

Dimplex CFP3920BW 20-Inch Electric Fireplace, Burnished Walnut
Customer Ratings: 4.5 stars
List Price: $399.00
Sale Price: $364.99
Today's Bonus: 9% Off
Buy Now

What a beautiful space heater. This heater throws a lot of heat and it's attractive. We've installed it in our finished basement that has no other source of heat (this is upstate NY people) and the heater keeps the room toasty. Well made, can't say enough about how much we like this heater.

Click Here For Most Helpful Customer Reviews >>

This is a very nice electric fireplace for the money! It added a lot to our living room! The only thing I would have liked to see would have been a setting on the remote for the thermostat.

Best Deals on Dimplex CFP3920BW 20-Inch Electric Fireplace, Burnished Walnut

I bought this item for my parents.It took 3 shipments to get one that didn't have broken glass doors. It was sent in two boxes but Amazon only sent 1 return shipping label. After numerous phone calls they finally understood and sent another. This happened with both of the returns.The product(once we got one that wasn't broken)worked well.My parents love the look and the warmth it produces.

Honest reviews on Dimplex CFP3920BW 20-Inch Electric Fireplace, Burnished Walnut

Sadly, my fireplace was shipped without a piece, the bracket to hold the glass panel in. The panel still fits snug, and until I get the piece from Customer Service, it seems to stay in place fine anyway. The flame effect is surprisingly,very good. I did not expect it to be as life-like as it turns out. The heater is very quiet, and actually warms both my living room and dining room, an area approximately 30 x 15, to a comfortable degree. I agree with the poster above that a separate setting for the thermostat and flame would have been great. Also, since it is RF, it doesn't work with my Harmony One remote, but the remote is small and only has an "on" and an "off" button. One strange thing, I looked on the Dimplex site, and can not find this model. Even if it was a closeout, shouldn't they still list the model?

Find helpful customer reviews and review ratings for Dimplex CFP3920BW 20-Inch Electric Fireplace, Burnished Walnut

I received this last evening. It arrived in two large boxes and required assembly. It is the assembly instructions that prevent me from giving the fireplace 5 stars. While the mantle/hearth was relatively intuitive, the fireplace connections to the hearth were separate and not as simple as they could have been. There is little good instruction regarding the installation of the glass front (which was pristine upon arrival).

Now to the good: Wow! The fireplace, both wood and fake fire are top quality when compared to others I've seen in big box retailers and it was considerably less money.

The remote turns on and off the unit only which makes good sense to me. The only reason I would have to adjust the thermostat would be if I were to move the fireplace to a different room. The thermostat is easily adjustable and the flame and heat can be controlled separately. The noise made from the unit is less than the space heater I'd been using in the basement and is certainly far more attractive.

I'm very pleased with the quality, fit, finish and look of this unit and I expect to enjoy it for years to come.

UPDATE: I've had this heater for almost two years now (12/12)and while I will admit that the heater has gotten a bit noisier, it's still more quiet than most other free-standing heaters. The flame and all other components are as good as the day I put it together. It heats well and the flames are as vibrant as ever.

Still Recommended!

Buy Fom Amazon Now

Wednesday, May 14, 2014

Intermatic PF1102T Freeze Protection Timer with Thermostat Reviews

Intermatic PF1102T Freeze Protection Timer with Thermostat
Customer Ratings: 4.5 stars
List Price: $283.58
Sale Price: $167.35
Today's Bonus: 41% Off
Buy Now

The MOST IMPORTANT POINT.....most people post a 5 star review after they receive a product, install it and it works. They are happy and they give a product 5 stars for working after they take it out of the box. This review is after 21 months of careful testing.

I have pages of handwritten and collected data on the problem with this freeze protection probe. But I will try to be concise here.

The Timer itself generates warmth when in the metal weather proof box. This causes the temperature to rise inside the weatherproof box and causes the freeze protection copper tube that runs through the box to cut off the pump, thinking it is now warmer than freezing, even if the outside air temperature is still below freezing. Now, once the timer is off, the box cools down and then in 20 minutes or so, the Freeze Protection will cut the pump back on and it will run until the temperature in the box rises again and it cuts off the Freeze Protection switch.

This results in your pumps turning on and running for 30 minutes and then turning off for 20 minutes, then running for 30 minutes and then turning off for 20 minutes. Ultimately, this will keep your equipment from freezing, but it doesn't really work like it is supposed to. It is better for the electric pump to come on and run for the 6 hours you go below freezing, instead of this on and off pattern.

I spent a lot of time with Intermatic Service Techs on the phone. I was obsessed with making this thing work. Mainly because I had paid $155 for this item then paid a pool electrician to professionally install it and that led to a bill of about $300 total. So I wanted it to work.

The best thing about Intermatic is that you can still get someone on the phone, if you are patient and willing to go through all of the phone menus and call backs.

First, they had me run the copper tube that works the freeze protection outside of the weatherproof box, using one of the bottom round punch outs on the bottom of the box. I put the copper tube in a short piece of electrical conduit, to protect it. Following their instructions to a tee.

Second, they sent me a new freeze protection switch. I installed the new one and got the same results.

Third, they sent me a new relay switch. I installed the new one and got the same results.

Fourth, the only part I had not replaced is the actual timer and it seemed to be working fine, so they were reluctant to send me one. The timer doesn't seem to generate too much heat, since the temperature inside of the box is below freezing when the freeze protection kicks in. It is once it kicks in, that the heat begins to build.

We ended our Customer Service Journey with the Intermatic tech suggesting I drill a hole in the side of the metal weather proof box and run the copper tube out the side of the box and down, to eliminate the 6 to 8 inches of copper tube that are exposed to the heat inside of the box, when you run it out the bottom of the box. You might have to be looking at the guts of the unit for this to make sense. But the copper tube starts at the top of the box and runs to the bottom and out a hole in the bottom of the box and then down another 18 inches or so, inside of electrical conduit. The electrical conduit and nut are not provided with this unit. That was something I picked up at the hardware store.

I have not tried this solution, because it would expose the fragile copper vein to damage. Since it would no longer be hanging inside of the electrical conduit that fastens to the bottom of the box. It would just be running out the side of the box and dangling down from the hole I punched in the side.

Maybe this would fix the problem, because only a few inches would be exposed to the heat inside of the box and more of it would be exposed to the cold outside of the box.

You can do the same thing by going out and opening up the door to the weatherproof box and leaving it open when you are expecting freezing weather. This allows the Freeze Protection to work like it should, because it comes on and runs continuously until the outside temperature warms up. I have tested this and it works.

I know you are probably thinking that seems like an easy fix, why I am complaining. But remember, with the door open, you no longer have the protection from water that you paid for, when you bought the metal weatherproof box. And my box is exposed to the elements, that is why I wanted the nice metal box.

Intermatic was willing to seek a solution with me and sent me several parts over 12 months. In the end, I believe it to be a design flaw and not a problem with the actual electrical parts. I wonder if it wouldn't be better to buy the separate freeze protection mechanism by itself and install it in its own separate weatherproof box. That way, the heat from the timer and relay would not interfere with copper tubing that turns the freeze protection mechanism on and off. They do sale the separate freeze control on Amazon. If anyone tries it, please let me know. Of course, you then have 2 weatherproof boxes on your wall, instead of just the one combo unit. So there are pluses and minuses, but it should allow the freeze protection to work.

INTERMATIC TECH SUPPORT 815-675-7000

Click Here For Most Helpful Customer Reviews >>

This is a really great product. I decided that instead of installing myself I would hire an electrician.

BE AWARE the thermostat has a copper tube sensor that looks EXACTLY like a standard ground wire. My electrician thought it was a ground wire and cut it short and wired it accordingly!

Once that copper tube is cut the timer is shot and I have to order the replacement thermostat for an additional $45.

Make sure you don't make the same mistake.

Best Deals on Intermatic PF1102T Freeze Protection Timer with Thermostat

Starts pump at higher temps than I like but then again I don't get hard freezes at all. Just have it in case I forget to leave pump on when it gets below 32 a couple times a year.

Honest reviews on Intermatic PF1102T Freeze Protection Timer with Thermostat

Great product, been working great for a few months now. So easy to set up and runs like clock work!!

Find helpful customer reviews and review ratings for Intermatic PF1102T Freeze Protection Timer with Thermostat

It was excactly as described and the instructions were easy to follow. I had it installed with the new conduit and wire is less than an hour

Buy Fom Amazon Now

Monday, April 21, 2014

ProCom Dual Fuel Vent-Free Blue Flame Garage Heater - 30,000 BTU Reviews

ProCom Dual Fuel Vent-Free Blue Flame Garage Heater - 30,000 BTU
Customer Ratings: 4.5 stars
List Price: $219.99
Sale Price: Price Unavailable
Today's Bonus: 9% Off
Buy Now

Purchased this heater a few weeks ago. Easy to install, simple hose extention and brass nipple along with a low pressure regulator. Took more time finding the parts at the store than actually hooking it all up.

Make sure you wrap all threads with pipe tape prior to tightening, and test the connections for leaks (dishsoap and water mixture...leak will blow bubble). After all properly tightened, fire it up!

Thoughts on the heater: puts out an enormous amount of heat, especially for price. Does not come with feet, so it needs to be wall mounted, feet purchased, or some kind of stand fabricated so it is off the floor surface. I used 2 cinder blocks. Pretty stable, but I plan on getting feet of some kind for tip prevention.

Draw back: radiant head pretty much goes straight up, so if you are like me and work in a non insulated garage with open rafters, most of your heat will be leaving the work shop. However, you can get the attachable fan, or just use a tall oscillating fan on low to evenly spread the warmth.

**side note** everywhere I could read, this unit is said to be used with no less than a 100lb propane tank. While this might be true if you are using this heater in place of a regular home furnace, or you are keeping your garage regulated at a certain temperature; I am currently running off of a 20lb bbq grill tank with no issue. I leave it on for 1-2 hours and have not yet had any freeze up issues from over drawing the tank.

Click Here For Most Helpful Customer Reviews >>

Bought this heater in 2011, for our detached garage(approx 20' X 25')which my husband uses as his "club house". He's as comfortable out there, as he is in our house with central heat. Quality product, prompt delivery, and great vendor.

Best Deals on ProCom Dual Fuel Vent-Free Blue Flame Garage Heater - 30,000 BTU

I bought this as backup heat for the winter and had it installed in my fireplace this is a really good heater. Looks nice in my den.The ad says it is for a garage but I had it placed in my den fireplace and it looks really nice.You cannot leave the pilot on as it will heat your house up.My house is 1550 sq.ft. so I believe it will heat the whole house in the event we have a power failure as I only got it for backup anyway. Great looking heater will most definetly buy this heater again.Have already recommend it to family members.

Honest reviews on ProCom Dual Fuel Vent-Free Blue Flame Garage Heater - 30,000 BTU

Purchased in mid-October 2012 to replace wood stove and 30+years old forced-air furnace (although instructions caution the unit is not to be used as primary heat source), installed mid-November. Ordered white/no blower, got black. Roughly $250 for the stove, $200 for independent/retired/laid-off contractor installation: Two of three natural gas appliance installers said they "don't touch them" (meaning small gas heaters generally) for vague reasons; natural gas supplier's sub-contractor half again as expensive. Hung the unit on the living room wall myself (single/divorced female, 62); hanging took maybe an hour, gas hookup involved 4 hours (mostly in/out of the basement to cut/thread heavy-iron piping on threader set up in the driveway).

Home is a roughly 1300 square-feet (one large bedroom, one very small bedroom converted to walk-in closet/storage upstairs), 200-year-old fieldstone farmhouse--some new windows and attic protection but, for all intents, uninsulated. Half the downstairs (4 rooms/~800 square feet) heated in Michigan winter. Purchased unit precisely *as* primary heat source.

Unit's been up/running for a little over two weeks with outside temperatures/weather ranging from low 50's to mid-teens/20's with wind/rain/snow. Thermostat dial offers settings 1-6; set it on mid-2 for more-than-adequate heat through living room/bedroom/kitchen/bath with aide of ceiling fan in living room. No doubt whatever that it will handle a Real Michigan Winter.

Unit is attractive (actually prefer the black), unobtrusive, virtually silent. Slight odor of gas as thermostat/flame kicks on/off. No hard cool-down/heat-up of rooms like the old forced-air "blast" furnace; heat is as radiant/consistent as a wood stove without the work (which I loved when I could do it) and mess of wood. With the gas line piping in place, replacement, if ever necessary, would amount to the cost of a new unit.

Unit has not been in operation long enough to require cleaning. Waiting for first gas bill.

So far, I have no criticism of this unit whatever. It is perfectly lovely.

UPDATE 01/01/2013

First natural gas bill covered roughly 3 weeks' use, was easily half what the old furnace would have used/cost. Wall behind and 4-6" immediately above the mounted heater stays surprisingly cool, wall above that gets very warm but not too hot to touch/blister paint/be dangerous. Am considering purchase of another while price is reasonable.

I. love. this. heater.

UPDATE 03/22/2013

BACKGROUND FROM 10/2012: Home is a roughly 1300 square-feet (one large bedroom, one very small bedroom converted to walk-in closet/storage upstairs), 200-year-old fieldstone farmhouse--some new windows and attic protection but, for all intents, uninsulated. Half the downstairs (4 rooms/~800 square feet) heated in Michigan winter. Purchased unit precisely *as* primary heat source.

TODAY, 3/22/2013: Nearly through first Michigan winter with this heater as only heat source. Thermostat dial offers settings from 1 to 6; have never set above high-2/the line between 2 and 3. Have to set at lowest setting when outside temperatures reach 30-degrees. Operation is dependable, takes 1/2-hour or so to heat house from dead-cold, flame/heat is even and consistent. Haven't had to clean jets; will do that at the end of the season. The only nuisance has been a slight pale grey dusty residue/deposit noticeable on dark woodwork--byproduct of ventless natural gas combustion; it's probably on walls/drapes too but they're white/beige, cleaned every spring anyway. No noticeable condensation whatever. Haven't purchased second unit yet--may not need to except as backup/replacement *in case* anything goes wrong next year. Again/still: I. love. this. heater!

Find helpful customer reviews and review ratings for ProCom Dual Fuel Vent-Free Blue Flame Garage Heater - 30,000 BTU

I bought this ProCom black garage heater online from Northern Tool in October, 2011. I knew how to hook up gas appliances, so it wasn't difficult to install this. We installed it on our living room hearth after taking the gas logs out of the fireplace. Bought the BrassCraft hook-up kit from Home Depot. Also got the "feet" from Northern Tool (they were white, so I painted them black). Since this heater's on the hearth, we leave the fireplace vent slightly open for the little bit of needed ventilation required by this heater. The heater cycles on and off flawless, smoothly and quietly. With the heater set between 2 and 3, it keeps about 800 square feet at 67 degrees when it's in the 30s outside. Very comfortable heat. We don't run it when we're sleeping or when we're not at the house. Very pleased with this heater. Will easily save us $40 per month.

Buy Fom Amazon Now

Tuesday, December 10, 2013

Cheap Wireless Fireplace Thermostat / Remote

Wireless Fireplace Thermostat / Remote
Customer Ratings: 5 stars
List Price: $159.00
Sale Price: $119.00
Today's Bonus: 25% Off
Buy Now

First thermostat/remote purchase. Using it on a Martin fireplace with great results. Difficulty of installation of 5 if 1-10, just b/c I had to do some minor mods to install the off/on/remote component on the wall and 2 feet of supplied wire didn't suffice. Very easy to operate, and didn't mind that the thermostat is programmed to activate when it is 2 degrees below your set temp and shuts off the flame 2 degrees above the set temp. So if you set it at 71 deg, it will turn on at 68 deg and off at 73 deg. Haven't had the need to use the remote from the lazyboy yet, works just fine setting it while mounted to the wall and walking away. With evening temps at 38-45 deg the fireplace comes on about 3 times for mayb 20 min intervals and then shuts off. It is usually turned on at 6pm and shut off at 10pm. Had the thermostat for 3 months now and very satisfied.

Click Here For Most Helpful Customer Reviews >>

This remote works great, love the room temperature reading and the ability to set a temp for automatic on/off. Easy to install.

Best Deals on Wireless Fireplace Thermostat / Remote

This unit does the job I needed for my QuadraFire classic bay pellet stove. Unit is approx. 12-15' away with occasional reset required. Ok price..better than others.

Honest reviews on Wireless Fireplace Thermostat / Remote

Great affordable product. Good overall functionality, easy installation, control the heater from practically anywhere in the house. Met expectations and fast shipping. Highly recommend.

Find helpful customer reviews and review ratings for Wireless Fireplace Thermostat / Remote

I used this thermostat for one winter on a QuadraFire pellet stove. Install was simple. The unit kept the temperatures in the right zone. Operation was fine for me (Mr Rocket Science), but was not as simple for the other half. I will retrain the other half next season. I did encounter the pellet stove not turning on. I contacted the support via email and had a response in one hour. The batteries had gotten to low and temperature communication had stopped. This forced the stove to turn off and it got cold. I flipped the override on the receiver and we were toasty again.

Buy Fom Amazon Now

Wednesday, November 27, 2013

Cadet #08734 120/240v White Thermostat Review

Cadet #08734 120/240v White Thermostat
Customer Ratings: 4.5 stars
List Price: $24.99
Sale Price: $19.99
Today's Bonus: 20% Off
Buy Now

Arrived on time and worked as advertised. The assembly was easy and I will order one more for my second heater. I do recommand this product.

Click Here For Most Helpful Customer Reviews >>

Made for the baseboard heater and purchased seperately..Since it is made for the heater, it fits perfectly and is easy to wire.

Best Deals on Cadet #08734 120/240v White Thermostat

Product works well, it is the second one I bought. I use to control heat in spaces that had no heat before. In the winter, I set the thermostat so pipes won't freeze.

Honest reviews on Cadet #08734 120/240v White Thermostat

This is a very basic non-programmable thermostat that install easily on the Cadet baseboard heater (and not the wall). The double pole version actually will let you shut off the heater the single pole does not provide that capability. The setting is on a trial-error basis as there is no temp markings. I could not find a heater mountable programmable unit. The included installation instructions are not as good as the ones that come with the baseboard heater itself!

Find helpful customer reviews and review ratings for Cadet #08734 120/240v White Thermostat

I just had the electrician install this. Apparently this thermostat is attached on the baseboard heater itself (so 1 thermostat per heater), so one will have to bend down to turn it on. I had thought this thermostat was hung on the wall, but I was wrong. We had 1 heater/thermostat unit installed in our freezing downstairs hallway (in Boston!) and in the downstairs bath. They both seem to be working well, but the real test will be next winter.

Buy Fom Amazon Now