Showing posts with label old honeywell thermostat. Show all posts
Showing posts with label old honeywell thermostat. Show all posts

Friday, January 9, 2015

Reviews of Dimplex TWH2031CW 2000/1500-Watt Fan Forced Wall Heater

Dimplex TWH2031CW 2000/1500-Watt Fan Forced Wall Heater
Customer Ratings: 4.5 stars
List Price: $105.00
Sale Price: $102.44
Today's Bonus: 2% Off
Buy Now

I bought several of these to replace the 35-year-old wall heaters in my house. They were the same voltage and almost the same size, so switching them out was pretty easy. They've worked great for about a year now, with no problems.

Click Here For Most Helpful Customer Reviews >>

This heater produces a pleasant stream of warm (not hot)air. That was exactly what I was looking for. I also wanted a heater with a sealed heating element rather than one with an exposed wire coil as it might create a slight fire danger. This particular model does NOT include a thermostat. I control it with a 24 volt relay and a Honeywell wall thermostat. It looks good in the master bath and is very quiet. Installation is quick an easy if you are comfortable doing line and low voltage wiring. Otherwise, you might want to call a licensed electrician.

AMAZON processed the order very quickly and it was shipped via FedEx Smartpost. It arrived TOO soon, actually before I had my wiring ready for it.

Best Deals on Dimplex TWH2031CW 2000/1500-Watt Fan Forced Wall Heater

This heater is fantastic. I bought it to replace a small electric baseboard in my bathroom. This thing is whisper quiet and heats the bathroom almost instantly. Outstanding product! Installation is ridiculously simple.

Honest reviews on Dimplex TWH2031CW 2000/1500-Watt Fan Forced Wall Heater

I found that there is not much information about these wall heaters. I was most concerned about the noise level as I've heard some heaters previously that make whirring or buzzing noises. This is a quality built heater and is whisper quiet. You hear the fan, but it's as quiet or quieter than the central heating I've had in other homes/apts. Very happy with this purchase.

Find helpful customer reviews and review ratings for Dimplex TWH2031CW 2000/1500-Watt Fan Forced Wall Heater

Rather large heater for a minimal amount of heat, and mine is wired to 240V. Also, brand new out of the box it spends the first 2 minutes loudly rattling every time it's turned on. Then it finally settles down and is pretty quiet....

Buy Fom Amazon Now

Saturday, November 29, 2014

Review of Optimus H-8408 Portable Micathermic Flat-Panel Heater

Optimus H-8408 Portable Micathermic Flat-Panel Heater
Customer Ratings: 4 stars
List Price: $99.99
Sale Price: $71.01
Today's Bonus: 29% Off
Buy Now

I purchased this product after reading several positive, if not quite rave, reviews. I was particularly interested in the ability to regulate the temperature using the thermostat. I was using it to supplement the heat in a large bedroom at my parents home in Chicago during this past, particularly cold, winter.

Set up instructions were adequate. I attached the legs and the casters, re-read the precautions about placement in the room, plugged it in and turned it on. It immediately began heating up. Greatly encouraged, I set the thermostat, stayed in the room for a while and, deciding it was like watching and waiting for a pot of water to boil, I left the room. I waited about 25 minutes and then went back into the room to see how much it had heated the room. I was surprised to find the indicator light on the heater off and no heat being emitted. The room was still very chilly.

I turned the thermostat up thinking that would start the heater again.... nothing.

I turned it to the off position and then on again.... nothing.

I turned the thermostat to it's highest possible temperature setting.... nothing.

I tried turning it on and off at both heat level wattage settings.... nothing.

I unplugged it and replugged it and turned it on again... nothing.

I checked to be sure it had not tripped the circuit breaker.... it had not.

I unplugged it, waited a while longer to see if, after completely cooling down, it would start again... nothing.

Simply put, this product just stopped working within an hour of first plugging it in.

I sent it back to Amazon for a refund, drove over to Home Depot and bought a portable heater that their manager recommended. It worked just fine.

Click Here For Most Helpful Customer Reviews >>

I ordered this product to supplement the heating in our 5th wheel RV, especially at night. Sorry folks but it doesn't cut it. It is 29 outside and now only 63 only a few inches in front of and above the heater. I was hoping for more but I got less. Such is life.

Best Deals on Optimus H-8408 Portable Micathermic Flat-Panel Heater

I agree, not the hottest thing on the planet but gets the job done. And it doesn't complain. Maybe others got defective products from manufacture, but mine works great.

Honest reviews on Optimus H-8408 Portable Micathermic Flat-Panel Heater

Wonderful, does what it was designed to do. Would recommend it to friends and relatives. Price was great as well.

Find helpful customer reviews and review ratings for Optimus H-8408 Portable Micathermic Flat-Panel Heater

I have had this heater for a month-and-a-half, and I am very pleased with it. I had hoped it would heat the whole area (a basement apartment-in-progress), which it does not. But what it does do is to heat whatever/whoever is in front of it. It feels like sitting in front of a fireplace! Toasty warm, although it does limit how far away from it you can get. Before getting the Optimus H-8408, I had a different type of heater that was also rated for large rooms. IT DID NOTHING, except make a lot of noise (fan-forced type heater). The Optimus is SILENT, and good value for the money. Don't expect it to work miracles, especially if it is your ONLY source of heat, but it certainly has kept me happy through January and the first half of February in an unfinished basement!

Buy Fom Amazon Now

Tuesday, October 14, 2014

Reviews of Lux Products TX1500E Smart Temp Programmable Thermostat

Lux Products TX1500E Smart Temp Programmable Thermostat
Customer Ratings: 4.5 stars
List Price: $75.76
Sale Price: $29.77
Today's Bonus: 61% Off
Buy Now

Lux Products TX1500E Smart Temp Programmable Thermostat

After researching thermostats, I replaced my builder-grade 1 week thermostats with a couple of Lux 1500E units. This was one of Consumer Reports' best buy models from last year (the other also a Lux). Additionally, I liked Lux's programming dial which simplifies programming; with the dial, there are fewer arcane button press combinations to deal with. Installation was simple and straightforward. The display on the 1500E is fairly large and has an electroluminescent back light that's activated by pressing any button. I'm farsighted but can read the display without my glasses. The 1500E is a 5-1-1 thermostat but also includes a "special" schedule that can used for vacation or holiday making this a 5-1-1-1 thermostat.

I found programming to be quick and simple and the unit works as advertised. I have one complaint and one quirk to mention. The complaint: The operating instructions aren't the best. In particular, there is precious little explanation of the "swing" function or what the swing numbers actually mean. I sent an email to Lux and received a phone call the next day with a thorough explanation. Fantastic customer service!! For the record, the swing setting numbers correlate to quarter degrees (the instructions should state this but don't). The default setting is 1 meaning the thermostat will cycle when the temperature deviates .25 degrees. Keeps the house temperature constant but heat or AC will constantly cycle. Setting the swing to 4 will cause heat or AC to turn on when temperature deviates 1 degree (4 X .25) from the set temperature. You can set the swing up to a value of 9 (2.25 degrees). Here's the quirk part: with my old thermostat, if I set the temperature to 69, the heat would turn on when the displayed temperature dropped to 68 and turn off when the displayed temperature rose to 70. The 1500E, with a swing setting of 4, doesn't work quite the same way. Even though displayed temp is 68, heat won't come on right away. It's almost as if the thermometer controlling the display isn't the same one controlling the thermostat itself. Either that, or a swing setting of 4 is working differently than I'm expecting. Please note, I do not find this a problem with the 1500E, just a little odd. Also note: most instructions accompanying thermostats are lacking.

Overall, I am very pleased with the Lux 1500E. It feels well built, has a nice display, and a competitive price. Add Lux's great customer support, and I'd highly recommend it.

Click Here For Most Helpful Customer Reviews >>

I ordered three Lux TX1500E thermostats. Before installing I tested them for accuracy by placing all three Lux thermostats side by side, and comparing the temperature and humidity readings with two additional thermostats and hygrometers I know to be accurate.

All three Lux units displayed different temperatures from each other. One of the three units was accurate. The temperature is easy to calibrate by setting the dial to run mode, and while holding the up button, pressing the down button once. A screen pops up allowing the temp to be set plus or minus five degrees. In this case the temperature on one of the units was 2 degrees high, so I entered -2 on the calibration, and since calibrating the temperature readings have been accurate.

The humidity readings for all three units were initially off by up to 7 percentage points. The unit allows for calibration up to +/15 percentage points by setting the dial to run, pressing the H button, and while holding down the up button, pressing the down button once. After calibrating the units, they are still off by a couple percent, and occasionally display a ridiculous reading like 95% relative humidity (RH) when the actual RH is 50-60%, but for the most part the RH is close enough.

The humidity reading on the unit does not display automatically. The "H" button must be pushed to display relative humidity. To clarify, the thermostat runs off temperature only, i.e. there isn't an option to run the air conditioner until the relative humidity reaches a certain level.

The display on the unit is puzzling. On the left the time is displayed prominently, and in a much smaller font the temperature displays on the right. A more helpful display would be: Actual temp, Set temp, and actual humidity all in large lettering, and then the time somewhere off in a corner.

The reason I bought a programmable thermostat is for the swing function. My old thermostat would constantly cycle the a/c (on for only 5 minutes at a time) because it was turning on the unit when the temp hit 79.25 degrees and turning it off when it hit 78.75. This 1) damages the a/c equipment, and 2) does not allow the a/c units to run long enough for effective dehumidification to occur, since the a/c doesn't really start to dehumidify effectively until it has been on for at least 10-15 minutes. Without proper dehumidification, the house feels warmer than it is (i.e. it's not the heat, it's the humidity).

This Lux thermostat has a default swing function of 1, which means that if you set the thermostat on 79, it will turn on the a/c at 79.25 and turn it off at 78.75 degrees. The swing function can be set between 1 and 9. Using a 79 degree setting, a swing value of 4 means the a/c will turn on at 80 degrees and turn off at 78 degrees. A swing value of 8 means the a/c will turn on at 81 degrees and turn off at 77 degrees. I don't understand why the default swing is at 1 (i.e. .25 degrees). A setting of at least 4 (i.e. 1 degree) seems prudent for the health of the a/c equipment and humidity control.

Moving on, I purchased this Lux unit instead of a Honeywell because 1) Consumer Reports gave the highest rating of all tested thermostats to the Lux TX1500E, which rated much higher than the Honeywell units, 2) These are $40 vs. over $100 for the Honeywell units, and 3)I called tech support for both Honeywell and Lux. Honeywell routes you to an overseas call center staffed by people who barely speak English. Lux has a call back system, but they called back within two hours, and the guy I spoke with was intelligent and located in the U.S.

Before purchasing I also considered the Lux TX9000TS, which is a touch screen thermostat that received Consumer Reports' second highest rating, right behind this unit. I purchased the TX1500E instead because 1) better pricing, 2) I read the 1-star reviews on Amazon for both products, and the TX9000TS seemed to have more problems than the TX1500E, and 3) The manual dial/arrow key set on the TX1500E is more intuitive for me to navigate than a touch screen.

I found programming the thermostat to be easy, although a little tedious, as the program settings must be entered 4 times (once for weekdays, once for Saturday, once for Sunday, and last for Special Programs).

One feature I'm not thrilled with is the fan setting. The fan can be set on "auto", meaning it runs only when the a/c or furnace runs. The other fan setting is "on" meaning it runs continuously (potentially causing some major humidity problems during the cooling season in a hot/humid climate). What I would like to have seen is a "circulate" option for the fan, meaning if the a/c or furnace hasn't kicked on in the past 30 minutes, the fan will circulate the air for 5-10 minutes in order to improve indoor air quality.

With a fan setting of "on", let's say the a/c has run for 20 minutes and the a/c coil now has water dripping off it. If the fan keeps running without a/c, much of that condensed water on the coil is going to re-evaporate into the air that the fan is blowing over it, which will raise humidity, partially defeating one of the two functions of air conditioning (lower temp and lower humidity). At least this is what happens in humid climates such as Houston where I'm located. A "circulate" function on the thermostat would avoid this problem.

Best Deals on Lux Products TX1500E Smart Temp Programmable Thermostat

I did a ton of research before buying two of these thermostats to replace the typical round Honeywell ones. These are easy to install and are working well. I particularly like the ease of checking humidity levels, living in far Northern MN it is essential to keep the humidity level up during our winters. Easy to program and use.

Honest reviews on Lux Products TX1500E Smart Temp Programmable Thermostat

Replaced a Hunter thermostat which drove us crazy because it did what it wanted to do rather than what I wanted it to do. It was difficult to program and unecessarily complicated compared to the LUX. The LUX was easy to install and hasn't missed a beat since I put it in. Consumer Reports rated it a best buy.

Find helpful customer reviews and review ratings for Lux Products TX1500E Smart Temp Programmable Thermostat

I installed the Lux TX1500E Programmable Thermostat in my house a few weeks ago and it was straightforward to install, reasonably priced and had all the features I wanted. Installation was especially easy because the mounting slots on the Lux aligned with existing wall holes from my old thermostat. The package even included small lettered & numbered flags so I could tag existing wires (sticker 'W' on wire attached to terminal 'W,' etc.) before removing the old thermostat!

The TX1500E provides 5/1/1 (Mon-Fri/Sat/Sun) and 'Special' modes, each of which allows temperature programming changes at four different times. 'Special' mode lets you switch over to a range of settings that you've programmed for when you want to quickly override daily settings. I like the notched circle molded into the door which prevents the door from closing in 'Special' mode, a passive reminder which lessens the chance of you accidentally leaving it there long-term.

I am quite pleased with this thermostat and recommend it to anyone who wants a programmable thermostat with a solid, basic feature set. Choose a different model if you want to set Mon-Fri individually, or switch automatically between 'Cool' and 'Heat' modes: I have no need for either feature and appreciate the programming simplicity of this model.

Installation tips:

* The new thermostat as did the existing one rocked a bit on the wall when I pushed buttons. I felt this would eventually work the drywall screw anchors loose so I stuck two strip of thin foam on the back of the base horizontally above and below the screws before final installation: it now feels nice and tight on the wall!

* Internal clearance is tight so take extra care when routing wires and stuffing excess back into the wall or it's a pain snapping the main unit into the base. This was probably the most time-consuming stage of the installation.

Buy Fom Amazon Now

Friday, October 3, 2014

Discount Mr. Heater 30,000 BTU Natural Gas Radiant Vent Free Heater

Mr. Heater 30,000 BTU Natural Gas Radiant Vent Free Heater #VF30KRADNG
Customer Ratings: 4 stars
List Price: $342.62
Sale Price: $244.46
Today's Bonus: 29% Off
Buy Now

I bought this from this vendor in December 2010. The color is a light cream color. It comes with a 3/8" elbow flare fitting. The gas line in the fireplace had a 3/8" flare fitting. The supply line is a 24" from HD, for under $20. Mr Heater recommends not putting the unit in an enclosed space, such as in the fireplace, so I put it on the hearth. The unit has a fan with an on off switch, and the fan comes on when the unit is warmed up. The fan has one speed and is as loud as the microwave. I only used the fan a couple of times, opting instead for the ceiling fan on low in reverse. The unit has a pilot light that is lit with a battery (included) powered igniter. The pilot is easy to light and I turn it off when not using the heater. The thermostat goes from 1 to 5, with 1 being about 55 degrees, and 3 being about 70 degrees. The amount of gas is not adjustable by the heater, but it can be turned down with the gas valve built into the fireplace. I added a photo that shows the heater running with the gas turned down by the fireplace gas valve. This allows the heater to run all day and keep the room at a constant temperature without cycling on and off.

The good: Very low cost for a lot of heat. Fan and floor mounts are included. With ventless, all the heat generated stays in the room. Infra red radiant heat is warm. You might want to search on high intensity gas heaters. The infra red heater allows us to turn the house thermostat way down, and have the same comfort in the family room that we would get by sitting in the sun on a cold day.

The bad: Ventless has a combustion smell. I got a slight head ache for the first two weeks after running the unit at full power. Either I got used to it, or the newness burned off. The unit is not as attractive as a gas log insert.

These heaters are supposed to cause condensation, and we were hoping for an increase in humidity, but the house is still in the dry range at 30%.

I bought this heater as an experiment. I had a $4,000 gas insert installed in my last house with excellent results, and installed the same item in this house, but it was a dud. I wanted to test my expectations whether a 40,000 btu vented gas insert with 75% efficiency generated the same comfort as a 30,000 btu infra red ventless. The big difference is the radiant heat. The infra red ventless generates more comfort. It feels like a roaring fire, but does not look like one. I still wanted the ventless to eliminate the smell, and asked three insert manufacturers to provide any a test results they have for their units for radiant heat, but got no answers. My conclusion is that the inserts look pretty, and they generate the same kind of heat as the house heater, but they don't do radiant. I'll enjoy the warmth, live with the smell, and keep $3,800 in my pocket.

Click Here For Most Helpful Customer Reviews >>

I bought & posted the LP version of this unit after reviewing the comments/opinions of this NG unit as well...figured I would post a copy as they are basically the same unit, only using a different 'flavor' of fuel! ;) ALL info is completely relevant, just keep in mind the 'LP (propane) specific comments are directed @ this units' LP twin-brother!

Recently experienced some winter power outages & realized a dire need for some 'peace-of-mind' during any future episodes! Consequently, this came in handy yesterday 12-19-2011, when the furnace happened to fail out! I am in the White Mountain range, and it was only 9 degrees when this happened; this little guy kept us from freezing to death, literally! BTW, i am in a 2000+ sq. foot home, 2 level, so even though that's much more space than this one is actually capable of heating, the heat naturally moved upstairs & throughout the house & kept it 'livable', regardless! ;) This unit provides more than enough heat to 'camp-out' & survive a no-heat situation comfortably for probably up to 1000sq. feet in a pinch, if it's not too, TOO cold out! ;) The heater does EXTREMELY well, is VERY efficient (around 99.7%!), and a perfect emergency-type or 'supplemental' heating source. It is NOT recommended as a primary heat source as it is NOT vented and even illegal for use in some states (Massachusetts) because of this, so check w/ your state laws 1st before ordering...Note: this unit should NOT be used in a bathroom or bedroom, only a 'primary' (and open!) living space/quarters!...

When you order this heater, be sure to get an appropriate regulator assembly/hose to go with it, as the pressure needs to be 'stepped-down' to 11-13WC, or around 1/2 to 1 PSI in normal human speaking terms! ;) It is NOT meant to be connected directly to the LP gas supply (like you would a natural gas system) without incoming gas pressures first being regulated down; it will blow the valve system & would NOT be covered under any warranties! :P ...

As this unit is VENT-FREE...just for peace of mind for you 'worry-wart' type people (like me!), I would wholeheartedly recommend the use of a reputable carbon monoxide detector in the home this is to be used to protect you & your loved-ones from any dangers...the unit IS equipped w/ an ODS system, that will automatically shut the unit down if there not enough available oxygen (for you!) in the room it is operating, so that helps ease some worries!...Just so you know, my heater is operating in the downstairs 1000 sq. feet living space, in a 10x15 living-room, CO detector @ farthest wall from heater; it's a KIDDE Nighthawk digital CO detector Kidde KN-COPP-3 Nighthawk Plug-In Carbon Monoxide Alarm with Battery Backup and Digital Display (VERY good!) & has registered ZERO '0' ppm since firing up the heater in the same room! not too shabby! ;)...my detector also has the 'explosive gas' detector built in as well, which comes in REAL handy when dealing w/ LP (propane) gas, as it heavier than air, sinks low, & tends to 'pool' up in lower or enclosed spaces, just waiting for a spark! :O Natural gas is a lil' bit 'friendlier', 'cause when it leaks off, it is lighter than air, & tends to float up, intermingling w/ other air & usually finding places to dissipate & escape with other heated air leaving the home! ;)

Just a bit of info regarding a specific feature on this unit (and actually one of the reasons I chose this model over the other brands!) is a unique digital temperature readout display on the top right corner of the housing, where the thermostat control is located; you can see a pic of it in image two @ the top of the page...Well, this particular feature is NOT included with this unit. I have contacted Mr. Heater regarding this feature and why it is missing...they explained that, although it was a really nice feature to have, customers were 'getting confused' as to what it was & how it related to heater operation???...O-kaay?...so that feature has been omitted from ALL 2011 built units as of January, 2011. This includes ALL units, both LP and natural gas, infrared AND blue-flame units included; SO, if you really appreciated (& wanted!) this feature like I did, the only way to obtain it is to find a 2010 (last years model) unit in somebody's 'old-stock' in their warehouse...I have not had any leads...good luck! >:(

I suppose it's not that important, but I thought it was a handy & useful feature to have w/ a heater...I mean, practically ALL those little ceramic heaters now run on digital temp controls & readouts now too, right!?! :O Consequently, all the pics and descriptions for any of the newer 20-30k BTU units of this nature including the digital temps are incorrectly advertised & need to be updated as such to reflect the omission of this nifty lil' feature... :(

PROS:

VERY efficient

Fan unit INCLUDED with this model (costs $30-50 xtra charges w/ similar units!)

'Free-standing' feet INCLUDED w/ this model (also additional costs w/ others)

ELECTRONIC ignition; VERY nice, compared to the click, click, click push-button BBQ igniters (which rarely work half the time!)

very COZY, & nice radiant heat literally POURS from the face of this heater! :) warms the bones! ;)

very easy to hook up & start using, right outta-the-box!

NO electricity needed whatsoever for operation!...of course the blower wont operate, but it's a nice QUIET & COZY heat! :)

CONS:

Fan unit not very powerful, & slightly on the loud side, a little quieter than a hairdryer on 'low' setting; doesn't move much heat, but the radiant heat helps w/ that issue on it's own! ;) ...it CAN however be set to 'ON' or 'AUTO' or OFF! (which is nice when you don't want to hear it!), AND it is automagically turned on by heat & cuts out when the heater cools down, so no 'human-thought' required when using! :)

Has the ability to burn up fuel pretty quick if you leave it up 'high' for a quite awhile...of course it WAS only 10 degrees! bbbrrrr! :O

Unit REALLY stinks when you use it 1st time, burning off paints/oil/new stuff...recommend burning OUTSIDE for awhile HOT to burn off the bad smelling stuff & 'cure' the unit before indoor use (I didn't have a choice!) :(

Kinda misleading pics/description regarding the digital temp display feature, should be updated to reflect this issue

FYI...vent-free units are VERY efficient heaters, HOWEVER, one important snippet of knowledge that most don't know, or are not usually told about, is the fact that these types of heaters have the capacity to release up to a QUART (32oz) of water vapor into your house while in operation (burning); this is due to the fact that there is no venting for the exhaust gases to escape...hence your awesome efficiency is ALSO the culprit of unneeded water vapor...BUT, this is somewhat negated by the fact that a heater is most likely used in the Winter (cold!) months...humidity levels are usually alot lower in the Winter, and as a result, most people usually choose to add water to their homes (humidifiers, steam pots on the wood-stove, etc.)during these times anyway to help reduce chapped hands & lips, dry skin, & lowering the chance of catching a cold, sore throat or getting sick! So the extra moisture could actually be seen as a 'PRO' depending on how you view it!...too much moisture in the home can obviously be a problem as well! :P

...All in all, I find ALOT of positive benefits regarding this heater & it also works really well for what it was designed to do (possibly heating even better than it was rated by sq footage!)...I would totally recommend this heater for anyone needing a back-up emergency or supplemental heat source for not really alot of money @ all! Geez, very economical in fact compared to 'commercially' available installs/solutions! It's 'The Great Lil' Heater that Could!' & does the job very nicely, thank you!

Happy Holidays 2011 & stay WARM!!! ;)

Best Deals on Mr. Heater 30,000 BTU Natural Gas Radiant Vent Free Heater

I was a little doubtful about reviews when I bought this heater, but it is great heater! I use it in my garage and I barely have to turn the heat setting above 1. I can walk into my garage in the middle of winter, in which I live in Northeast ohio so it gets cold, and be in shorts and t-shirt and be comfortable! So far I have had it for 2 and 1/2 months and it has not really caused my gas bill to go up at all. I absolutely recommend this product for anyone out there, especially for the men who like to be in thier garage. You cant find a more affordable and efficient way to heat the garage!

Honest reviews on Mr. Heater 30,000 BTU Natural Gas Radiant Vent Free Heater

I was looking for a heater that had a built in thermostat and temperature display. I bought this heater to take the place of an old heater in my 1200 sq ft detached garage. The product description claims it has a 'adjustable thermostat' and also that 'Heater also has built in digital room temperature display'. To my dissatisfaction, this heater does not shut off when it reaches a set temperature. And it does NOT have a digital room temp display. There are 5 settings, lowest to highest.

The product seems to work fine and does a good job heating up the garage. I keep it on low and let it go to work. However, I find myself having to shut it off manually. Even at the low setting, my garage can get warmer than I'd like. And it doesn't stop putting out heat, which is a waste of energy.

I would recommend this product based on its ease of use and overall function. However, if you're looking for a heater that you can adjust and leave alone then this isn't the product for you.

Find helpful customer reviews and review ratings for Mr. Heater 30,000 BTU Natural Gas Radiant Vent Free Heater

The short of it is this heater works flawlessly and I can depend on it.

More details: The parts don't seem to be formed to fit well and the assembly was not the best so I was worried at first but it works flawlessly. Great design! I had another one that looked like it was made better but the pilot light kept going out if the fan came on and sometimes even if the fan was turned off so I could never depend on it from the day it was new. Very happy with this product and now I don't come home to a freezing house or worry about the pipes freezing and bursting if I travel. I'm not talking about parts hanging or falling off, just the details of the fit if you notice those things. Even the thermostat is more accurate and responds quicker than the other heaters I've had.

PS. I hope the time I spent doing this review has helped you the same way your reviews have helped me make better decisions. Thanks!

Buy Fom Amazon Now

Monday, September 8, 2014

DeLonghi TRV0715T Vento Hi-Speed Convection Oil-Filled Radiator Reviews

DeLonghi TRV0715T Vento Hi-Speed Convection Oil-Filled Radiator Heater with Programmable Timer
Customer Ratings: 4.5 stars
List Price: $105.00
Sale Price: $79.95
Today's Bonus: 24% Off
Buy Now

Lovely design. Great heat! Easy to move from place to place. The "new" smell disappears quickly in a few hours via following the directions. (I also used a tiny bit of lavender oil on the top fins during those hours to mask the initial unpleasant smell. And I placed it near a window that was ajar.) We haven't used the programming so I can't comment on that (see below for update!). (There was one similar model that lacked the programming feature, but it was not sold by Amazon and required a substantial shipping fee. My advice: Always check the origin and any shipping cost! When given a choice, I prefer Amazon. Second choice is to go through Amazon, if it's not something Amazon carries.)

Back to the heater:

This heats quickly. And it's cute! Easy to store, as this model is particularly slim. I strongly recommend reading the directions so you avoid overtaxing your electric outlets or circuits. Beyond that, this thing will be your "friend" on cold mornings as it heats up so quickly. It's like a little fireplace except it's safe.

My vote of confidence in the heater and in Amazon service (it arrived 2 days after shipping!) is so strong we are ordering a second one. This will enable us to keep the house temperature lower and just warm the rooms we're actually occupying at any one time.

My initial order included another DiLonghi heater (HHP1500, Mica Panel Radiator), which is very attractive looks almost like a small TV except with wire mesh instead of a screen. The oil-filled radiator keeps its heat longer and puts out more heat. But the Mica Panel radiator is preferable if space is limited and you're looking for something to keep your feet warm while reading or watching TV; it puts out consistent, gentle heat mostly from the front, a bit from the top whereas the oil-filled radiator puts out a lot of heat from the top. (Also, the mica panel one is so light, you can easily carry it from one room to another.) We're happy with both, but the oil-filled radiator is the one we decided to duplicate as, for us, it's more versatile, and can really "add" heat where you need it thus allowing us to have the thermostat lower. (Both heaters do not use blowers, which, if you have allergies, is a big plus! That's another reason to supplement forced air central heating with these space heaters.)

We chose a slim model. So I expect the larger, heavier models would be great heat "work horses" if you're looking for something with an even greater heat output.

Update (10/12/09):

Programming function of this heater:

By accident I have now learned about the programming. It's an ingenious design, in my view. It's not via a computer, but there's dial where you set the current time (be sure to move that dial only clockwise!) and then there is a circle of tiny little red levers (like tiny hairs, except they move). And these little levers are really on/off controls. If the lever is moved to the center of the circle, then it's "on" so if you don't need to "program" it, you simply move all the little levers toward the center and you have nice little circle of red. However, for any spans of time where you want the heater to turn itself off, you move the lever to the outer part of the circle.

Does your heater APPEAR to be "broken" because it won't turn on? Check that little red circle of levers.... in case for some reason they've been moved and the unit has turned itself off. You can easily put them back the way you want them.

Again, it's a brilliant little programming design! Very easy to understand. And it really is not subject to the kind of problems of things that you program digitally. As I said above, it's like a circle of "on/off" switches that you can control individually.

We're glad we've got the second one on the way!

Click Here For Most Helpful Customer Reviews >>

This is a great heater. I like that it creates its own airflow without a fan the hot air just comes off the top as if there were a fan! I also love the timer function you can set the heater to be on or off in 15 minute segments all day long. I use this feature to have it warm up my bedroom so it's warm when I arrive home from work, just before bedtime, and also to warm up the room before I wake up, without having the heater run all night (it's a powerful little thing!). The air doesn't get dried out, but it circulates and becomes toasty warm. There is also three output settings (1,2, and 3), so you can really crank it up if you need some heat quickly, but keep it low for everyday use. I'm extremely pleased with this heater.

Best Deals on DeLonghi TRV0715T Vento Hi-Speed Convection Oil-Filled Radiator

If you've got high ceilings or an area larger than 14x14 and expect this unit to heat, you're going to be disappointed. Also, as the previous review states, the heat rises from the top of the unit, which is about 2 1/2 feet off the ground. If you're prone to "cold feet" this unit is NOT for you.

There is no fan on this unit, so it's perfect for an office, baby's room or bedroom that always seems to be a bit chilly. If you have a large bathroom, this would be great to pre-set the attached 24 hour timer to come on an hour or so before you get up.

So if you want to heat a 12x12 or 12x14 room or smaller this unit will be fine. Just dont expect your legs and feet to be warm.

Honest reviews on DeLonghi TRV0715T Vento Hi-Speed Convection Oil-Filled Radiator

Before we bought this heater, we have been using a DeLonghi TRD0715T for more than two years. The TRD0715T has been working well but it has some problems too. For example, it sometimes gives noise if its position is not "right". It also smells if it is on the highest setting. Recently it started to have ticking noise from the timer. But overall, we have been very happy with its performance. So we bought the TRV0715T for our daughter's room. The TRV0715T is smaller in size, and much quieter. It doesn't have noticeable smell even on the highest setting. However, we feel it is not generating enough heat like TRD0715T, although they all are 1500 watts. We use the middle setting all the time because the current will be too high for our apartment if we use the highest setting. If you have a big room to heat up, I wouldn't recommend it to you.

Find helpful customer reviews and review ratings for DeLonghi TRV0715T Vento Hi-Speed Convection Oil-Filled Radiator

Best space heater! Especially when you have babies and young children. I keep one in my master suit which is about 20x16. Whole upstairs is about 61 degrees when the suit is set at 70 during winter time. I feel better that I am not heating up the whole upstairs when I only need the heat in my suit. I also keep 2 of these in my finished basement which is about 40X15. Without the heater, basement is at around 58, with it 73 when set at medium setting. My baby can touch it and get startled, but never caused any scream or crying. I feel very safe and good about this heater. VERY EASY TO FIGURE OUT THE CONTROL!....well if you are used to setting outlet timers.

Buy Fom Amazon Now

Saturday, August 2, 2014

Discount Presto 05420 FryDaddy Deep Fryer

Presto 05420 FryDaddy Electric Deep Fryer
Customer Ratings: 4.5 stars
List Price: $29.99
Sale Price: $22.99
Today's Bonus: 23% Off
Buy Now

I've had one of these little fryer appliances since they first became popular in the seventies. The current model is the second one I've had, being larger than the original model that came out.

For someone not needing to fry enormous amounts at one time, this little machine is ideal. It requires only a very small amount of vegetable oil. I've used it to fry chicken wings, quickly, to do french fries and onion rings, to do other smaller chicken parts, and it works beautifully. There is no thermostat; you just plug it in, wait 10 minutes, and the temp is 375. Having such a small amount of grease, it recovers heat more quickly than an electric skillet.

When you are through, if you plan to reuse the grease you can simply let the machine cool, snap the plastic top on, the put the whole thing in the fridge. I don't fry that often, and when I do, I tend to fry a lot, so usually I just discard the oil. Such a small amount is used (usually no more than 3 cups starting out) that I don't feel bad about discarding the oil.

The sides on this appliance are quite high, and splatter around the machine has never been a problem. I used common sense, though, when I fry, whether it's here or on the stove.

I'm sure the all-enclosed auto-fryers that are out on the market are nice, and if I fried a lot I'd probably get one. However, I only fry once or twice a month, and for that, this little machine is perfect. I'd recommend one to anyone--durable, simple, and does exactly what it's designed for!

Click Here For Most Helpful Customer Reviews >>

After spending more money on 2 faulty deep fryers (Rival is hit-or-miss for quality), I've finally settled on this little beauty.

Pros:

1.) Cheap and simple, a very compact and minimalist package overall. It is nothing more than a steel bucket with a heating element underneath.

2.) Fries at 350 degrees, 25 short of "ideal" but safe for cooking with lard and lower smoke point oil. Try lard if you never have, you can still get it in supermarkets.

3.) Milled steel bucket, cast aluminum base. Inside has a permanent synthetic non-stick surface. Clean up and changing oil is simple.

Cons:

1.) This fryer isn't for families with young children or dumb people. Hot oil is always dangerous to work around and this unit is a STEEL BUCKET FULL OF OIL. The outside is hot. The inside is hot. It's hot.

2.) Doesn't have a lid to stop the occasional spatter.

3.) The bottom and healing element are shielded, but it will still warm up your synthetic countertop. I have mine on an old wooden cutting board to avoid warping the plastic.

Best Deals on Presto 05420 FryDaddy Deep Fryer

I fry things about 1-2 times a week, and I liked my fried things to be very crispy yet not laden with oil. I wanted something that would truly get to a hotter frying temperature, to make my frying quicker and more "healthful"...(healthy frying....is that an oxymoron or what?) Because I don't fry THAT often, I just needed something simple.

I like this fryer because the heat-up time is very quick, and there is much less splatter then if you were frying in a pot. When I fry, I usually do your typical fried foods: fries, onion rings, wontons, etc. I have not tried to do anything else in it yet.

If the oil is fairly clean after I use it, I will put it in the refridgerator, but not keep more than a week. This is a very simple fryer. If you are a more heavy-duty fryer, then you might want to look into a fancier one. The exterior is not cool-touch, and there is no basket. If you only do small batches of things, and don't really fry that much, or even if you do, then this will be a great fryer for you.

Honest reviews on Presto 05420 FryDaddy Deep Fryer

This machine is really easy to use...I fried dough to make funnel cake and donuts, and it was simple. All you have to do is put in your oil, heat it up, and add the dough. The number of things you can fry is endless. My personal favorites are the funnel cake, chicken tenders, and french fries. Depending on what you are making, cooking time can vary from mere minutes to a half hour. Experiment, create your own recipes, it's easy.

One word of advice is to make sure to clean the fryer and change the oil regularly. Nothing is worse than frying with old oil. Keep the fryer very clean! Enjoy!

Find helpful customer reviews and review ratings for Presto 05420 FryDaddy Deep Fryer

This 'review' is actually just a 'heads up' for anyone considering buying an electric fryer that has both the heating element(s) and the thermostat in/under the bottom of the fry pot.

This design relies on the fact that 'hotter' oil rises up and away from the heat source, and up and away from the thermostat. This works very well when the oil is clean and clear.

But you *might* have an issue getting your oil back up to temp after frying a few batches of breaded 'items' (ie: breaded fish or chicken pieces).

Even a relatively thin layer of fried breading crumbs on the bottom of the pot creates an insulating 'blanket'. So when the heating element turns on, the relatively small amount of oil in the blanket heats up quickly, and can't move up thru the crumb layer quickly enough, and the thermostat senses the 'blanket' is up to temp, and shuts the heating element off. The thermostat does a great job of keeping the oil in the crumb blanket at the proper temp, but the main body of oil above the blanket takes a LONG time to get back up to the proper temp (since the thermostat is constantly turning the heating element off). And if the blanket is heavy enough, ambient heat loss will cancel out the small amount of heat escaping the blanket, and the oil will NEVER get up to proper temp!

This can be compensated for by scraping the bottom and stirring the oil between batches, OR by sifting out all the crumbs after every few batches.

But you can avoid the issue by using a fryer with side mounted and/or immersed heating elements.

Buy Fom Amazon Now

Wednesday, April 23, 2014

Cheap Lenox Industrial Tools 12124 R2 PVC Cutter Upto 2-3/8-Inch

Lenox Industrial Tools 12124 R2 PVC Cutter Upto 2-3/8-Inch Ratcheting Cut
Customer Ratings: 3 stars
List Price: $166.67
Sale Price: $106.37
Today's Bonus: 36% Off
Buy Now

I thought with the Lenox name this would be a better pair of pipe cutters, I was wrong. They did not hold up or do any better than a cheaper pair. I've used this type of cutter for more than 20 years in the pool business. Don't waste your money.

Click Here For Most Helpful Customer Reviews >>

This tool is worth the money if you want a clean and straight cut through larger PVC. I've been using it all morning on 2.5" PVC and it cuts straight, clean and easily. I have tried a hacksaw, what a mess. Buy this, it make plumbing easy!

One tip: if it's larger PVC such as 2.5", don't open it too far for each ratchet. One click at a time each opening and it saves your hands. 15 seconds and the cut is done.

The only thing easier would be an electric tool for big bucks.

Best Deals on Lenox Industrial Tools 12124 R2 PVC Cutter Upto 2-3/8-Inch

the blade broke the first time i used it lenox is now made very cheap.not a good product at all

Honest reviews on Lenox Industrial Tools 12124 R2 PVC Cutter Upto 2-3/8-Inch

This product works as advertised. I am able to cut all pvc pipe with one hand by the ratchet mechanism. It easily cuts up to a two inch pipe with the same ease as one inch pipe.

Buy Fom Amazon Now

Thursday, February 13, 2014

Reviews of Whynter 14,000 BTU Dual Hose Portable Air Conditioner with Heater

Whynter 14,000 BTU Dual Hose Portable Air Conditioner with Heater
Customer Ratings: 4 stars
List Price: $679.99
Sale Price: $548.49
Today's Bonus: 19% Off
Buy Now

I have a home office in an attic that's sun-baked in the summer and drafty in the winter, and this powerful heater/air conditioner can quickly bring the space to a comfortable temperature year-round.

Unfortunately, the unit is quite loud. The AC fan (which runs continuously even when the compressor is off) is so loud I have to turn it off when making a phone call. And the heater (which turns off completely when not in a heating cycle) makes such a jarring noise when it comes on that I jump out of my seat every time. Since the AC noise is more constant, it wouldn't be a problem if it were further from my desk, but if I had this in a bedroom there's no way I'd be able to sleep with that heater noise. (Update: after using this for a year, I rarely notice the sound of the heater turning on in my office setting.)

Also, despite the unit being marketed as not needing a water tank or drain for air conditioning, it does occasionally leak water onto the floor. Placing a cookie sheet or an improvised aluminum foil pan underneath is an easy solution, but it took me a while to notice what was happening.

Despite these concerns, I'd buy the same unit again due to its environmental features. The dual-hose design makes it more efficient, and the coolant doesn't harm the ozone layer. Unless the noise would be a problem in your situation, I'd recommend it.

Click Here For Most Helpful Customer Reviews >>

I live in San Jose, California and we tend to have a few periods of warm weather (90 degrees and above). I purchased this unit to replace the other AC I had in my living room/kitchen area. This AC is put together very well (I'm girl challenged when it comes to DIY projects). In the past I had AC's where the hoses didn't fit right and here comes the duct tape. This one I didn't need to use any duct tape! Everything fit it perfectly, you can tug and pull on the hoses and their not coming out of their socket. My window size is larger than normal so I had to purchase the extended window kit, which I found on Amazon. The AC has a nice sleek look, kinda looks like a computer server :)

I turned the AC on and it was a breath of fresh air. Within 40 minutes my whole living room and kitchen were cool, at about 74 degrees when it was about 85 degrees outside. Amazing! My other AC unit would only slightly cool the living room and the heat/exhaust coming from the back end of the unit would sometimes interfere with the cooling capabilities of the machine. Not this one! The back side of it isn't extremely hot to the touch and same with the hoses, meaning the machine is running very efficiently. I even had the oven on and it didn't phase this machine. I actually had to turn it the fan lower because I started to get cold.

Others mentioned that it is noisy. I didn't notice the sound too much, but then again the sound of a fan is soothing to me.

The manufacturer did a fantastic job of packaging this machine and UPS did a great job of ensuring the product got safely to my house. The unit is heavy, but it has wheels and glides easily around my hardwood floors. I'm a very happy customer! I would definitely recommend this AC to anyone.

Best Deals on Whynter 14,000 BTU Dual Hose Portable Air Conditioner with Heater

This has been a very hot summer and I was going to be scared to look at the next electric bill........man I was very surprised it only went up $30.00 and this cooler was ran from 7am to 9pm every day! Rated up to 500 sf but it hold it own in keeping a larger area fairly cool, upper 70's but a lot better then the 110+ out side and the 90+ was the coolest that the swamp cooler could do during the day in my elderly fathers home. Very easy to operate as my father does not do electronics or computers very well. There will be a extra bonus now that this has a heater on it for the winter will be able to get rid of the small costly space heaters that he likes to use. This is a great buy for your money.

Honest reviews on Whynter 14,000 BTU Dual Hose Portable Air Conditioner with Heater

I got this in the mail after doing research for a week straight. I think I know everything there is to know about every type of AC out there. I bought a new house with no AC and its been 90+ since we moved in. AC was priority #1 which is why I spent so long researching. 4-5 hours a day reading anything any everying related.

The issue I have is my whole first floor is one open layout with 25ft vaulted ceilings. 15x25 living room attached to a 15x15 kitchen with a WIDE opening between the two so the AC Had to do both of those rooms and the Height I thought would be a problem given the ceilings were soooo high. Add those two plus a little walkway and open stair case and were talking about 1200 sq ft plus the high ceilings.

Soooo.. I got it in the mail last night and waited 4 hours to plug in as the manual says you should do incase the shipped put it on its side. If they handle it wrong and you plus it right in you will damage the product for good. Setup pipes vertically and used carboard to jimmy rig the extra length I didnt have in the window kit.Ill fix this permanently later. Read the manual and turned it on... Disappointment ... I felt the temp coming out and the speed and thought there was NO way this was going to cool this whole area.

Cleaned up the boxes and said to my wife this thing gets one chance over night. If it doesnt work I am returning it the next day. It was on for two hours while I cleaned up and ate dinner and felt no change so I was really expecting it to now work. I locked up the house. closed all the doors , windows, any thing that would seal the room as much as possible and went up stairs to bed. Again couldnt be more disappointed and upset at this point thinking im an idiot and should have listened to negative reviews.

Woke up this morning and opened my door which is 25 feet up looking down on the living room and a gust of 60-65 degree air hit me in the face... I was shocked it cooled that high up with no other fans helping. Walked down stairs and my place was freezing when it was 85 when I went to bed. Not only that but not one drop of water in the tank so it evaporated it all. Now overnight the temps cooled which helped and the sun will wreak havoc today so I too the intake hose and unhooked it so it would be pulling in cold air from inside the house and cooling it rather than cooling the hot air outside and making it work over time. When I get home today I think the place will be nice and cool even after the sun came out because the house is sealed up and the unit is pulling 65 degreed air from inside the house and spitting it out freezing cold into an already conditioned room. Had I left the intake out I think it wouldn't cool as well during the day pulling 95 degree air.

Long story short, be patient and let the unit catch up with itself and the temps. Dont judge it.My room couldn't have been any worse for this thing to cool and it did its job like a champ. Also use the intake hose properly. Its not ALWAYS good to have it pull air from outside. Sometimes you can optimize the performance by adjusting what air the unit conditions. Right now its pulling inside air but when I go home and sun goes goes and temps get better out side ill put the intake hose back on . Hope this helps.

Im going to try and post a photo of my living room from the bedroom 25 ft up so buyers can see what this thing was capable of.

Find helpful customer reviews and review ratings for Whynter 14,000 BTU Dual Hose Portable Air Conditioner with Heater

This is a great product. I installed this at the mothers home. It is cooling a little over 500sq ft. It is doing a great job. I have seen other reviews stating that this product is loud. I found that not to be the case at all. It is very quiet. I purched this one due to the fact that it has the heater function as well. This is a great product...

Buy Fom Amazon Now

Monday, December 23, 2013

Econo-Heat 0603 E-Heater, White Review

Econo-Heat 0603 E-Heater, White
Customer Ratings: 4 stars
List Price: $99.00
Sale Price: $82.13
Today's Bonus: 17% Off
Buy Now

I live in BC Canada and live in an older home. I took temperature readings around the house before and after installing these heaters. I have 5 of them in 3 bedrooms and two large hallways. My old energy consumption was 7500 watts per hour for the 5 old heaters. Currently my new heaters use a total of 2000 watts per hour and far more efficient so they run less than my old heaters. That is a 73% Energy savings!!! Each of these panels use 400 watts of power (which is like running FOUR 100 watt light bulbs)

This heater is more like a "room temperature maintainer" than a heater. It's great to use in a bedroom and bathroom (up to 120 Sq feet) however remember that this heater works best to keep a room temperature at a certain temp, rather than heating a room quickly. So if you room is at a certain temp, this heater will make sure it stays at that temp. In fact it takes HOURS to heat up a room with this heater, but that's how radiant heat works. It's a slow and steady process. Once it gets to a target temp, it keeps temperatures nice and warm and comfortable rather than feeling like you are in a blast furnace. Think of a camp fire. You can warm yourself directly off the fire (like a traditional heater) or heat your feet on some fire stones around the fire for many many hours (like these heaters.

I highly suggest you buy a temperature control wall socket switch (or build one using a single pole thermostat). That's where you get the most energy savings. That's because once you hit the target temp, these heaters really do a great job kicking on for a few minutes to maintain a temp and shutting off. NOTE: even when power is cut to the panels they still generate heat for 30 to 45 minutes. This is because the panels are nothing but an electric element encased in a ceramic panel. The element heats up the cermanic panel and that's what really heats up the room. Takes a while for these panels to cool down, so you get a heating bonus even with power is shut off.

====TESTING========

Here's my Test numbers using the Panel heaters:

BEFORE

Bedroom at 8 pm (before heaters) : 20 degrees Celsius (or 68 F)

Bedroom at 8 am (when I get up before the heaters): 12 degrees Celsius (or 53.6 F)

AFTER

Bedroom at 8 pm (with heaters) : 20 degrees Celsius (or 68 F)

Bedroom at 8 am (when I get up): 21 degrees Celsius (or 70 F)

These numbers are consistent in all the rooms I tested. So use these panels do work.

=====IMPORTANT OBSERVATIONS======

1) When they mean 120 sq feet. They REALLY mean 120 sq feet in a well insulated room. If you have bad insulation, these heaters will do nothing. Don't even think about using these to heat an open concept large room.

2) The lower to the ground, the better these things work. The instructions suggest 3 to 6 inches off the ground and that's the best. I mounted one in the centre of the wall because of all the stuff in the room. Compared to the one's I have at the 6 inches off the ground, the performance difference is quite extreme. Almost a 60% loss in efficiency. Makes sense because these heaters send heat upwards and not forward. So it sends hot air up the wall..heating also the wall on the way up to the ceiling. The longer the stretch of wall to heat, the more effective it is.

3) These heaters do get hot but don't damage the walls. I have pets that like to sleep close to them and you can touch them by hand and not get burned...but not for long. Please don't put crap in front of the heater. That just should be obvious.

4) Painting these do help it blend into the environment of the room walls very well. You kind of forget about them unless you get near them.

5) Heaters are completely silent. No fans.

6) The heat feels different. My old heaters felt like a hair-dryer on my face when the fans kicked on. This heat is more subtle and more cozy. Feels more like being in a blanket of warm air in summer time.

===== Cons =========

1) THE SMELL!!! When you first fire these heaters up, they have a toxic smelling scent off the heaters. NO! IT'S NOT ACTUALLY TOXIC but enough to take notice and go on-line to see if this stuff is safe to breath. Turns out it's a protective coating (for shipping purposes) that needs to burn off for 8 hours to one day. After you burn it off, there is no scent at all.

2) No instant gratification. It's a hard adjustment for some people not to turn on a heater and not get blasted with heat. These heaters take some time to get used to but once you understand they are meant to stay on for long periods rather than short bursts, you sort of forget that these heaters are on.

===== CONCLUSION =====

I would only recommend these heaters under very SPECIFIC situations (like not freezing in your bedroom while sleeping. It does what it does incredibly well as long as you stay within those specifics situations. I have used these heaters when it was snowing and they worked great, especially with my temperature controlled wall sockets. My energy bill has gone down by 70% from the previous year. It maintains the temperature of the house better than any heater I have ever own...short of a Central Heating unit and those cost alot more to run than these heaters. So if you have a bedroom or a place with pets or kids where a heater can be a fire hazard (under 120 sq feet), then this heater will work great to get the chill out of a cold climate area.

Click Here For Most Helpful Customer Reviews >>

We have used 4 of them in our house for 4 winters. Our house was built in 1928 and is located on an island in SE Alaska. It gets cold and humid(60%+ year round) here, and never gets that warm in the summer(mid 50-70*) The only insulation is in the couple walls I have torn down to insulate. Half the windows are old wood single pane and the other half are milgard. We heat our home with a wood cookstove stove on the main level. We have one unit in the master bedroom(12'x14'), one in the spare bedroom(11'x14'), and two in the kids bedroom(18'x11'). The two in the kids room are on timers so they alternate through the night as to which is on. The spare and master room units are only on when we turn them on(usually only at night). They have kept the rooms warm so I would not have to get up in the night to tend the wood stove. We love them. They are great for when the weather turns cold out but not worth the hassle of starting a fire up.

Best Deals on Econo-Heat 0603 E-Heater, White

I was in the market for a baseboard heater for my newly renovated basement bedroom but I was not satisfied with the traditional high wattage heater, so decided to search for a better solution. I was impressed by this product and the reviews, so decided to take the plunge and order one. I also ordered the plug in thermostat for the unit as well. My bedroom is roughly 200sq ft or so and upon turning the unit on for 10-15min, the whole room is nice and cozy. As for the surface itself, it is not too hot to touch at all.. I mean it is more than lukewarm but definitely won;t burn your hand on it (after about 30min of operation).

With the high hydro cost, I highly recommend this unit. Oh, the best thing is that it runs on regular Voltage, so there is no need to do any re-wiring at all. Just plug and go!

Honest reviews on Econo-Heat 0603 E-Heater, White

Second one I have purchased. Great for heating a small room (bathroom, inside porch, mudroom). Just remember do NOT TIGHTEN completely! Ceramic board does need to expand when turned on. (Learned that one on the first purchase!) Placed this one in our mudroom.......no more cold coats and shoes in the morning! Need one more for an unheated bathroom. Economical too!Econo-Heat electric panel heater

Find helpful customer reviews and review ratings for Econo-Heat 0603 E-Heater, White

Bought this for a drafty home office after reading Amazon reviews, and I have to say, it works. Since we rent, and I didn't want to put too many screws into the wall, I attached the heater to a large piece of particle board, and now I can move it anywhere I want and simply lean it against a wall. Keeps that room fairly toasty, and the heat doesn't feel too "concentrated". It circulates noiselessly around the room, and you actually have to be really close to the unit to feel the heat coming off of it. Not so hot as to be unsafe, but warm enough to do an effective job. No complaints at all so far!

Buy Fom Amazon Now