Click Here For Most Helpful Customer Reviews >>
I was afraid the model wouldn't be compatible with my fridge at first but it worked out nicely. I got it fairly quickly in the mail and was able to replace the old one with no problem. now my fridge is working again.
Showing posts with label bryant thermostats. Show all posts
Showing posts with label bryant thermostats. Show all posts
Thursday, December 25, 2014
Best Frigidaire 297216600 Thermostat for Refrigerator Deals
Replaced the original one that based on the code number has the same temp for on and off. The design is a bit different. So far my fridge (Kenmore, top freezer, 21 cubic feet) works like new.
Sunday, October 12, 2014
Discount Hunter 44668 Comfort Saver 7 Day Room Control Thermostat
Customer Ratings: 
List Price: $103.99
Sale Price: $98.50
Today's Bonus: 5% Off

I have nothing but problems with the 44668 thermostat. I had the first one for less than a month and it started resetting itself. Hunter replaced it with a second one which after a few weeks lost communication with the remote sensor (had to reset unit), left the blower running in the house (had to reset unit), and finally stopped controling the system with an error 004. (Hunter Customer service didn't know what error 004 even meant).
Refusing to refund my money, Hunter is now sending me a third one. I politely told them that if I had problems with that one, I would escalate my problem within Hunter to demand my money back.
By the way, I ordered this through Amazon and CPO who is a Hunter distributor and I would like to point out their ridiculous '30 day money back guarantee' copy and pasted it says:
"All unused items can be returned within 30 days of shipment for a refund or exchange (unless otherwise noted at the time of sale). Items must be returned in their original packaging. If an item was shipped free of charge you will be billed for the cost of the original shipping."
Note the word 'unused'. How do you see if you like a thermostate, much less if it works properly, without using it? Statements like this discourage people from buying through the internet. I would have bought this at local retail but I couldn't find this particular model. If I had, it would be back to the store and I would have my money back.
I usually don't write reviews like this, but so far my experience with Hunter has been less than stellar.
I'll see if the third one works (which by the way takes almost two weeks for them to send).
TJ
9/15/09
Well, this saga started last May and I still can't get one of these thermostats to be reliable. I have tried three of them now and as of yesterday Hunter Customer Service is refusing to refund my money. I could write a book over what has occurred between now and last May when this started, but suffice to say that the people at Hunter Customer service in Memphis Tn are pretty useless and will say anything to try and make you go away. I could name names, but I won't. My last conversation was with one of the supervisors.
This morning I filed a formal complaint with the Tennessee Department of Consumer Affairs to see if they can mediate a solution for this. Its unfortunate that a company like Hunter who generally has such a good name for quality is being ruined by a bunch of incompetent people at their customer service center.
TJ
It also tells you to change the air filter after 500 total hours of heater + AC time.
The only reason I didn't give it 5 stars is I had 1 defective remote sensor. My thermostat wouldn't pick up the defective remote sensor temperature. After debugging it for 1 hr, I called tech support and after 3 minute of talking with tech support, they agreed with me that it was defective and I had to exchange for a new one. I didn't have any thermostat program resetting problem like the other reviewer.
I am still happy with the second sensor but feel like the programmability option is a waste. I have called customer service but hung up before getting to a real person. I will be calling them again when I have more time to waste.
The full review: I received and installed my Hunter 44668 last night, and everything has gone smoothly so far. I'm pretty impressed. I would give this product a 5-star review, but the user's manual knocks it down to 4-stars overall. If I was rating it on the user's manual alone, I would only give that 2 stars. I can definitely understand why other people have complained.
There are inconsistencies and omissions in the manual that should never have made it to the publisher. It's like the manual was written by a college intern and never proof-read. Sometimes the button you're supposed to press is shown in-line with the text of a particular step. Sometimes the button is shown in a column to the left of the instruction steps. Sometimes the buttons pictured in the left column don't line up with the steps in which they're supposed to be pressed. Sometimes the button picture is missing entirely, and the button you're supposed to press has to be inferred from the section title! It's a complete disaster.
I was lucky because I had read through the entire manual TWICE before I tried to program the thermostat--I read it once online before I bought it because I wanted to see what people's reviews were talking about, and then again a couple days later after it arrived, before I tried to program it. By the time I got around to pushing buttons, I had come to terms with some of the inconsistencies in the manual, and was prepared to compensate for them during programming. The process went pretty much flawlessly, and I actually got the unit installed and running in record time (for me).
I figure there are probably 3 types of people installing this unit... 1) people with lots of previous experience installing setback thermostats who will only bother to look at the manual as a last resort if the unit does something unexpected, 2) people who take the time to study the manual and work through its shortcomings, and 3) people who are going to depend on the manual to be correct because they're reading it for the first time and following it step-by-step as they try to install it and program it. The first group will be fine, because the actual setup is pretty intuitive if you've installed these things before. The second group will be fine, as I've demonstrated myself. But if you're in the third group, this thermostat is likely to frustrate you massively, and I would actually recommend avoiding it based on that.
So what do I like about this thermostat? I like the remote temperature sensors! I have a counterflow furnace in my house, which means the heat registers are in the floors and the cold air return is in the ceiling. Some wise guy mounted the thermostat in the hallway directly under the cold air return. There is literally a wall of cold air exactly where the thermostat is mounted, and at that location no thermometer is capable of determining with any accuracy the actual temperature of the house. As soon as the furnace shuts off, the attic cools the cold air return duct, and cold air starts falling out of the ceiling right onto the thermostat. When the furnace runs, it can raise the temperature of the rest of the house 6-8 degrees. But with that wall of cold air in the hallway, the thermostat won't budge a single degree! I needed to get the thermometer out of the hallway. However, I didn't want to yank the wire up out of the wall and fish it down in another wall somewhere else to move the thermostat. The remote sensor included with the 44668 is exactly the solution I need.
If you're buying this thermostat specifically to use the remote sensor, then one thing you need to realize up front is that the remote sensor comes pre-configured as an outdoor thermometer and NOT as an indoor thermostat. Step one, while you're working through the Options prior to programming, is to reconfigure the base unit to correctly recognize the sensor as an indoor sensor. Once I got that straight, the programming went smoothly.
Next, the omissions. One cool feature of this thermostat is that for any given program setpoint, it can read a single sensor or an average of multiple sensors. This isn't fully explained anywhere in the manual, it gets only the briefest of mention. You control the feature with the "sensor" button, and at any point while programming the unit, you can press the sensor button to walk through all the options for that setpoint. The options are: the built-in sensor (BI), remote sensor 1 (R1), remote sensor 2 (R2), BI+R1, BI+R2, R1+R2, and BI+R1+R2. Very nice, but not in the manual. And there doesn't seem to be any guard against choosing sensors that don't exist. For instance, all the R2 options were available on mine, even though I don't have an R2 running.
Another omission in the manual is the jumper wire supplied in the baggie with the screws and wall anchors. OK, it's red-colored. That's as much info as you get (assuming you're not color blind), because it's presence is not mentioned anywhere in the section about wiring the unit. In the back of the manual, where the wiring diagrams are shown (why are the wiring diagrams separate from the wiring instructions?), the jumper is shown wired between the RH and R1/RC pins in FIVE of the six wiring methods pictured, even including the 2-wire heat-only setup that my house uses! But is it supposed to be there or not? Does the thermostat get damaged if it's not present? I have no idea whatsoever. The instructions didn't say to install it, so I didn't, and my furnace is running. I just have to hope no damage is being done. Unanswered questions.
So, if you've managed to read this far, I'll finish with one subtle point I haven't seen anyone else talk about... The display backlight. This unit has an electroluminescent display backlight (think Timex Indiglo), and it works great. A nice feature. However, the manual says the backlight is *powered* by the 24V power from the furnace. The manual doesn't come right out and say it, but the way I read it, if you have a millivolt control system, you're out of luck. The display backlight won't work for you at all. Something to be aware of.
Many people have claimed the unit is very hard to program. It is virtually the same as other programmable thermostats I have used. The most important part is to write down what you want the program to do before you start programming. Then take it 1 day at a time.
The only confusion I had was setting up the remote sensor. At first I could not select the symbol for "T1" (the auxillary sensor) for my nighttime program hours. The unit came pre-programmed as if the extra sensor was to read outside temperature. You cannot program the furnace based on outside temperature or it would run constantly! I had to go to the options menu and change the sensor settings. I changed the outdoor temp sensor channel to -(meaning no outdoor sensor) and that the external "T1" sensor was channel 15 (the channel on the display of my auxilary sensor). If you have 2 or 3 extra sensors, then you have to set each temperature to the corresponding channel on the various sensors. After I set the sensor up correctly, it allowed me to select "T1" for my nighttime program.
Again, decide what you want to do before diving into the programming. What worked best for me was using the "everyday" programming mode to set up all of the days the same. Then I went back through each day and made small adjustments based on our schedules.
It works like a charm and at this price, there is no other comparison to it. Even a standard 5-2 programmable thermostat will cost more! Kudos to MarkDownAlley for good pricing and fast delivery!
List Price: $103.99
Sale Price: $98.50
Today's Bonus: 5% Off
I have nothing but problems with the 44668 thermostat. I had the first one for less than a month and it started resetting itself. Hunter replaced it with a second one which after a few weeks lost communication with the remote sensor (had to reset unit), left the blower running in the house (had to reset unit), and finally stopped controling the system with an error 004. (Hunter Customer service didn't know what error 004 even meant).
Refusing to refund my money, Hunter is now sending me a third one. I politely told them that if I had problems with that one, I would escalate my problem within Hunter to demand my money back.
By the way, I ordered this through Amazon and CPO who is a Hunter distributor and I would like to point out their ridiculous '30 day money back guarantee' copy and pasted it says:
"All unused items can be returned within 30 days of shipment for a refund or exchange (unless otherwise noted at the time of sale). Items must be returned in their original packaging. If an item was shipped free of charge you will be billed for the cost of the original shipping."
Note the word 'unused'. How do you see if you like a thermostate, much less if it works properly, without using it? Statements like this discourage people from buying through the internet. I would have bought this at local retail but I couldn't find this particular model. If I had, it would be back to the store and I would have my money back.
I usually don't write reviews like this, but so far my experience with Hunter has been less than stellar.
I'll see if the third one works (which by the way takes almost two weeks for them to send).
TJ
9/15/09
Well, this saga started last May and I still can't get one of these thermostats to be reliable. I have tried three of them now and as of yesterday Hunter Customer Service is refusing to refund my money. I could write a book over what has occurred between now and last May when this started, but suffice to say that the people at Hunter Customer service in Memphis Tn are pretty useless and will say anything to try and make you go away. I could name names, but I won't. My last conversation was with one of the supervisors.
This morning I filed a formal complaint with the Tennessee Department of Consumer Affairs to see if they can mediate a solution for this. Its unfortunate that a company like Hunter who generally has such a good name for quality is being ruined by a bunch of incompetent people at their customer service center.
TJ
Click Here For Most Helpful Customer Reviews >>
I just bought two of these for only $69.95 each at my local Sam's Club. My problem with my regular thermostats is that they're located in the hallway/living area which are in the middle of my 2 story home. At night, the bedrooms (on the sides of my home) become either colder in the winter or hotter in the summer than the middle of the house so the thermostats don't control the bedroom temperature well. With this thermostat, I can program it to control the heater/AC by using the wireless remote sensors I keep in the bedrooms, making the bedroom temps just right. The thermostat also has it's own temperature sensor built in. During the day, we are mainly in the hallways/living areas so I have the thermostat use it's own temperature to regulate the living area temperature. Also, another awesome feature is this thermostat doesn't need someone to turn on the heater during the winter or the AC in the summer. You set it to turn the heater on if it's below a certain temp, say 72 and turn the AC on if it's too hot, like say 78. So your house will always stay between 72 and 78! It doesn't matter if you suddenly have a cold or hot spell in the spring time, the thermostat will accurately provide hands-free control of the heater/AC.It also tells you to change the air filter after 500 total hours of heater + AC time.
The only reason I didn't give it 5 stars is I had 1 defective remote sensor. My thermostat wouldn't pick up the defective remote sensor temperature. After debugging it for 1 hr, I called tech support and after 3 minute of talking with tech support, they agreed with me that it was defective and I had to exchange for a new one. I didn't have any thermostat program resetting problem like the other reviewer.
Best Deals on Hunter 44668 Comfort Saver 7 Day Room Control Thermostat
Ok, here is the deal. I love the remote temperature sensor. It really compensates for only having one unit in a two-story house. However, for some reason the main unit arbitrarily resets its self or changes settings. I spent over an hour setting up a custom program and within a couple of weeks the unit reset and went back to factory defaults. I repeated the process only to have the same reset problem days later. I now have it set at 70 and leave it alone.I am still happy with the second sensor but feel like the programmability option is a waste. I have called customer service but hung up before getting to a real person. I will be calling them again when I have more time to waste.
Honest reviews on Hunter 44668 Comfort Saver 7 Day Room Control Thermostat
I'll give you the summary first, because my review became quite long: After one day with this unit, I will say that it's a great thermostat. Programming it is fairly intuitive. If you need remote sensors because of lousy thermostat positioning or because you want to set up multiple heat zones in your house, this is the thermostat for you. My complaints are with the documentation, which is quite poor.The full review: I received and installed my Hunter 44668 last night, and everything has gone smoothly so far. I'm pretty impressed. I would give this product a 5-star review, but the user's manual knocks it down to 4-stars overall. If I was rating it on the user's manual alone, I would only give that 2 stars. I can definitely understand why other people have complained.
There are inconsistencies and omissions in the manual that should never have made it to the publisher. It's like the manual was written by a college intern and never proof-read. Sometimes the button you're supposed to press is shown in-line with the text of a particular step. Sometimes the button is shown in a column to the left of the instruction steps. Sometimes the buttons pictured in the left column don't line up with the steps in which they're supposed to be pressed. Sometimes the button picture is missing entirely, and the button you're supposed to press has to be inferred from the section title! It's a complete disaster.
I was lucky because I had read through the entire manual TWICE before I tried to program the thermostat--I read it once online before I bought it because I wanted to see what people's reviews were talking about, and then again a couple days later after it arrived, before I tried to program it. By the time I got around to pushing buttons, I had come to terms with some of the inconsistencies in the manual, and was prepared to compensate for them during programming. The process went pretty much flawlessly, and I actually got the unit installed and running in record time (for me).
I figure there are probably 3 types of people installing this unit... 1) people with lots of previous experience installing setback thermostats who will only bother to look at the manual as a last resort if the unit does something unexpected, 2) people who take the time to study the manual and work through its shortcomings, and 3) people who are going to depend on the manual to be correct because they're reading it for the first time and following it step-by-step as they try to install it and program it. The first group will be fine, because the actual setup is pretty intuitive if you've installed these things before. The second group will be fine, as I've demonstrated myself. But if you're in the third group, this thermostat is likely to frustrate you massively, and I would actually recommend avoiding it based on that.
So what do I like about this thermostat? I like the remote temperature sensors! I have a counterflow furnace in my house, which means the heat registers are in the floors and the cold air return is in the ceiling. Some wise guy mounted the thermostat in the hallway directly under the cold air return. There is literally a wall of cold air exactly where the thermostat is mounted, and at that location no thermometer is capable of determining with any accuracy the actual temperature of the house. As soon as the furnace shuts off, the attic cools the cold air return duct, and cold air starts falling out of the ceiling right onto the thermostat. When the furnace runs, it can raise the temperature of the rest of the house 6-8 degrees. But with that wall of cold air in the hallway, the thermostat won't budge a single degree! I needed to get the thermometer out of the hallway. However, I didn't want to yank the wire up out of the wall and fish it down in another wall somewhere else to move the thermostat. The remote sensor included with the 44668 is exactly the solution I need.
If you're buying this thermostat specifically to use the remote sensor, then one thing you need to realize up front is that the remote sensor comes pre-configured as an outdoor thermometer and NOT as an indoor thermostat. Step one, while you're working through the Options prior to programming, is to reconfigure the base unit to correctly recognize the sensor as an indoor sensor. Once I got that straight, the programming went smoothly.
Next, the omissions. One cool feature of this thermostat is that for any given program setpoint, it can read a single sensor or an average of multiple sensors. This isn't fully explained anywhere in the manual, it gets only the briefest of mention. You control the feature with the "sensor" button, and at any point while programming the unit, you can press the sensor button to walk through all the options for that setpoint. The options are: the built-in sensor (BI), remote sensor 1 (R1), remote sensor 2 (R2), BI+R1, BI+R2, R1+R2, and BI+R1+R2. Very nice, but not in the manual. And there doesn't seem to be any guard against choosing sensors that don't exist. For instance, all the R2 options were available on mine, even though I don't have an R2 running.
Another omission in the manual is the jumper wire supplied in the baggie with the screws and wall anchors. OK, it's red-colored. That's as much info as you get (assuming you're not color blind), because it's presence is not mentioned anywhere in the section about wiring the unit. In the back of the manual, where the wiring diagrams are shown (why are the wiring diagrams separate from the wiring instructions?), the jumper is shown wired between the RH and R1/RC pins in FIVE of the six wiring methods pictured, even including the 2-wire heat-only setup that my house uses! But is it supposed to be there or not? Does the thermostat get damaged if it's not present? I have no idea whatsoever. The instructions didn't say to install it, so I didn't, and my furnace is running. I just have to hope no damage is being done. Unanswered questions.
So, if you've managed to read this far, I'll finish with one subtle point I haven't seen anyone else talk about... The display backlight. This unit has an electroluminescent display backlight (think Timex Indiglo), and it works great. A nice feature. However, the manual says the backlight is *powered* by the 24V power from the furnace. The manual doesn't come right out and say it, but the way I read it, if you have a millivolt control system, you're out of luck. The display backlight won't work for you at all. Something to be aware of.
Find helpful customer reviews and review ratings for Hunter 44668 Comfort Saver 7 Day Room Control Thermostat
This product was just what I wanted. At night we only wanted to heat the bedroom with a small space heater and let the rest of the house stay cool. We programmed the unit to regulate via the remote sensor during sleeping hours and now the furnace keeps the rest of the house cool while our room stays toasty with the small monitor heater. Before it was a balancing act to keep the room regulated, then the furnace would kick on and the room would get way too warm.Many people have claimed the unit is very hard to program. It is virtually the same as other programmable thermostats I have used. The most important part is to write down what you want the program to do before you start programming. Then take it 1 day at a time.
The only confusion I had was setting up the remote sensor. At first I could not select the symbol for "T1" (the auxillary sensor) for my nighttime program hours. The unit came pre-programmed as if the extra sensor was to read outside temperature. You cannot program the furnace based on outside temperature or it would run constantly! I had to go to the options menu and change the sensor settings. I changed the outdoor temp sensor channel to -(meaning no outdoor sensor) and that the external "T1" sensor was channel 15 (the channel on the display of my auxilary sensor). If you have 2 or 3 extra sensors, then you have to set each temperature to the corresponding channel on the various sensors. After I set the sensor up correctly, it allowed me to select "T1" for my nighttime program.
Again, decide what you want to do before diving into the programming. What worked best for me was using the "everyday" programming mode to set up all of the days the same. Then I went back through each day and made small adjustments based on our schedules.
It works like a charm and at this price, there is no other comparison to it. Even a standard 5-2 programmable thermostat will cost more! Kudos to MarkDownAlley for good pricing and fast delivery!
Friday, July 11, 2014
Cheap Sunbeam Microplush Throw Camelot Cuddler Electric Heated Warming
Customer Ratings: 
List Price: $69.99
Sale Price: $54.48
Today's Bonus: 22% Off

I bought two of these for night-time television viewing.
One for him, one for me. He was reluctant at first. But with the three levels of heat, (mine always on high, his on low) it really made us feel cozy. And they fold up neatly and easily when you're done.
I know this kept us from turning up the heat on a few cold nights, they paid for themselves already.
List Price: $69.99
Sale Price: $54.48
Today's Bonus: 22% Off
I bought two of these for night-time television viewing.
One for him, one for me. He was reluctant at first. But with the three levels of heat, (mine always on high, his on low) it really made us feel cozy. And they fold up neatly and easily when you're done.
I know this kept us from turning up the heat on a few cold nights, they paid for themselves already.
Click Here For Most Helpful Customer Reviews >>
This is a very nice and plush blanket. It was packaged well and delivered on time. I washed and tumble dried immediately with no issues or complaints. Confident this will pay for itself in decreased heating bills. I recommend this product as well as seller.Best Deals on Sunbeam Microplush Throw Camelot Cuddler Electric Heated Warming
I really like this blanket because it is really soft and comfortable. However, it doesn't get as warm as what I had expected, even when it is on the highest setting...not sure how good it will be when Winter arrives (my house gets really cold)...Honest reviews on Sunbeam Microplush Throw Camelot Cuddler Electric Heated Warming
My wife (and daughter) stay cold throughout the winter, so anything that helps keep the thermostat below 75ºF during the winter gets my wallet's seal of approval! It's so popular, on several occasions they have both tried to use it at the same time, so we bought a second (pink) one for our daughter. It's really cute seeing them both wrapped up for a night of movies.Find helpful customer reviews and review ratings for Sunbeam Microplush Throw Camelot Cuddler Electric Heated Warming
I bought two of these warming throws for my husband and me. His quit warming within a few months but we did get it replaced after shipping it off to the tune of $15 cost. Now that it is October, I got my throw out (the one that didn't break) and it won't warm. what is with this product?? They cost too much, cost too much to send back and they will not last!!!!!!!! Really disappointed.Wednesday, July 9, 2014
Reviews of World Marketing Pelonis ClassicCeramic Furnace
Customer Ratings: 
List Price: $112.99
Sale Price: $94.66
Today's Bonus: 16% Off

Since I already owned this same model Pelonis heater for 4 or 5 years, I was pleased to find it again and expected the same quality from the Pelonis brand. Unfortunately, this is not the case. The new heater's thermostat failed right after being turned on for the first time. Unlike my older heater, the new version now features a manual mode as if they do expect the thermostat to fail. With the manual mode, the heater can still be used by setting the speed, but it's definitely not as nice as the original one of this same model. It's also simply too much money to pay for something that does not work as described. Like most things these days, the quality is way less than products we used to be able to purchase with confidence.
And neither does this. For all the promised performance, cheaper existing heaters I own work better. This thing is not quiet, and ran a long time before providing measurable increase in temperature (one of few benefits of this heater is the digital temperature gauge that let me know how well it was not working).
I'm sure this product does well at heating small rooms or the underside of a desk, but for the price you can buy two heaters that do just as well.
Adding insult to injury, between the restocking fee and shipping, I ended up paying a third of the cost of the unit just to find out it did not work.
The new heater's fan doesn't ramp up as responsively as the original, and it seems the thermostat sensor, located on the cord, is much less sensitive than the older model, which is actually located inside the fan housing, making it far more sensitive to temp changes. I have to run the thermostat setting much higher, i.e. set it on 80-82 F to actually get a room temp of 75F. Maybe a redesign, placing the sensor inside, as it was previously, would cure this.
Those caveats aside, the heater puts out strong heat quickly, and will easily take care of an average-size living room, but not a huge room. Easily keeps a bedroom/bathroom toasty, once you get the 'stat calibrated to your preference
List Price: $112.99
Sale Price: $94.66
Today's Bonus: 16% Off
Since I already owned this same model Pelonis heater for 4 or 5 years, I was pleased to find it again and expected the same quality from the Pelonis brand. Unfortunately, this is not the case. The new heater's thermostat failed right after being turned on for the first time. Unlike my older heater, the new version now features a manual mode as if they do expect the thermostat to fail. With the manual mode, the heater can still be used by setting the speed, but it's definitely not as nice as the original one of this same model. It's also simply too much money to pay for something that does not work as described. Like most things these days, the quality is way less than products we used to be able to purchase with confidence.
Click Here For Most Helpful Customer Reviews >>
I purchased this item after reading the claimed performance. I have a room in the lower level of my house that is generally colder than the rest of the house. Rather than run the furnace, I usually use a small space heater. Unfortunately, most space heaters don't work that well.And neither does this. For all the promised performance, cheaper existing heaters I own work better. This thing is not quiet, and ran a long time before providing measurable increase in temperature (one of few benefits of this heater is the digital temperature gauge that let me know how well it was not working).
I'm sure this product does well at heating small rooms or the underside of a desk, but for the price you can buy two heaters that do just as well.
Adding insult to injury, between the restocking fee and shipping, I ended up paying a third of the cost of the unit just to find out it did not work.
Best Deals on World Marketing Pelonis ClassicCeramic Furnace
I already own a Pelonis IV, and ordered the V to use in our RV. It's great. Quiet, has a nice thermostat with digital temp. display. Works as well as I expected, and I'm quite happy with it.Honest reviews on World Marketing Pelonis ClassicCeramic Furnace
I own this product. It operates very quietly and really puts out the heat for a small space, used in a bathroom. Efficient.Find helpful customer reviews and review ratings for World Marketing Pelonis ClassicCeramic Furnace
I bought this heater as an additional unit, my original Pelonis' fan bearing had become noisy after many years, but was still putting out great heat FAST. Actually, the bearing noise goes away after the unit warms up, just rather noisy until then. I've had the unit apart, but can't find how to service the bearing or replace it, probably not replaceable. So I bought the new one in case it finally dies.The new heater's fan doesn't ramp up as responsively as the original, and it seems the thermostat sensor, located on the cord, is much less sensitive than the older model, which is actually located inside the fan housing, making it far more sensitive to temp changes. I have to run the thermostat setting much higher, i.e. set it on 80-82 F to actually get a room temp of 75F. Maybe a redesign, placing the sensor inside, as it was previously, would cure this.
Those caveats aside, the heater puts out strong heat quickly, and will easily take care of an average-size living room, but not a huge room. Easily keeps a bedroom/bathroom toasty, once you get the 'stat calibrated to your preference
Wednesday, May 28, 2014
Cheap Whynter WC-212BD 21-Bottle Dual Temperature Zone Touch Control
Customer Ratings: 
List Price: $375.00
Sale Price: $344.08
Today's Bonus: 8% Off

Unfortunately, as soon as I took it out of the box, I noticed that one of the rear vents was damaged. It looked as if someone took a hammer to it!! The box itself is not damaged, nor is the styrofoam that surrounded the product in the box. This means, it was damaged before they ever shipped it! How in the world do they not see the entire side having dents...and I mean...really noticeable dents... BEFORE they send it to the buyer??!! I requested a replacement and/or refund to cover the repair costs so let's see how their customer service is. Hopefully they get it right this time. I was so excited for it. Now it has just become a hassle to deal with.... A couple statements regarding the product itself...the frame is made of a rather light metal...you can literally press the vent itself with your finger and reshape the inlets. The drawers are a bit narrow. I can only fit 2 bottles on 3 of the 5 shelves in the red-wine section of the cooler. The unit itself looks nice though. It fits well in the apartment, and has a nice contemporary look to it.
List Price: $375.00
Sale Price: $344.08
Today's Bonus: 8% Off
Unfortunately, as soon as I took it out of the box, I noticed that one of the rear vents was damaged. It looked as if someone took a hammer to it!! The box itself is not damaged, nor is the styrofoam that surrounded the product in the box. This means, it was damaged before they ever shipped it! How in the world do they not see the entire side having dents...and I mean...really noticeable dents... BEFORE they send it to the buyer??!! I requested a replacement and/or refund to cover the repair costs so let's see how their customer service is. Hopefully they get it right this time. I was so excited for it. Now it has just become a hassle to deal with.... A couple statements regarding the product itself...the frame is made of a rather light metal...you can literally press the vent itself with your finger and reshape the inlets. The drawers are a bit narrow. I can only fit 2 bottles on 3 of the 5 shelves in the red-wine section of the cooler. The unit itself looks nice though. It fits well in the apartment, and has a nice contemporary look to it.
Monday, April 7, 2014
Lux P521U 5-Day to 2-Day Digital Universal Programmable Thermostat Reviews
Customer Ratings: 
List Price: $66.00
Sale Price: $37.97
Today's Bonus: 42% Off

It took about 15 min. to install and setup. Works like it should. I would recommend it for the price.I bought this to replace the dial honeywell on my hot water baseboard zone. I have old age eyes, so every time I looked at the dial, I couldn't tell what the temperature was, or what the setting was without grabbing reading glasses and a flashlight. The honeywell was off 4 degrees, so when it said it was 66 degrees, it was really 70 degrees. I kind of knew it, but confirmed it with this new thermostat, and an accurate lab thermometer. I like how you can adjust the swing on the temp, from 0.25 degrees, up to 2.25 degrees. It gives you some degree of adjustment depending on whether you want tight temperature range, or less frequent heat/cool cycles. This is the same as the 500U model available at Lowes, which I also purchased. Still waiting on trim plates to be available as the circular honeywells and old chomotherms are just a bit larger, and you'll need a trim plate, or a paint brush. Very easy to program. As others mentioned on the other similar models, when you push the buttons on the front, the backlight comes on with a very high pitched sound barely audible, but it goes away after the backlight dims, in about 5-10 seconds.
List Price: $66.00
Sale Price: $37.97
Today's Bonus: 42% Off
It took about 15 min. to install and setup. Works like it should. I would recommend it for the price.I bought this to replace the dial honeywell on my hot water baseboard zone. I have old age eyes, so every time I looked at the dial, I couldn't tell what the temperature was, or what the setting was without grabbing reading glasses and a flashlight. The honeywell was off 4 degrees, so when it said it was 66 degrees, it was really 70 degrees. I kind of knew it, but confirmed it with this new thermostat, and an accurate lab thermometer. I like how you can adjust the swing on the temp, from 0.25 degrees, up to 2.25 degrees. It gives you some degree of adjustment depending on whether you want tight temperature range, or less frequent heat/cool cycles. This is the same as the 500U model available at Lowes, which I also purchased. Still waiting on trim plates to be available as the circular honeywells and old chomotherms are just a bit larger, and you'll need a trim plate, or a paint brush. Very easy to program. As others mentioned on the other similar models, when you push the buttons on the front, the backlight comes on with a very high pitched sound barely audible, but it goes away after the backlight dims, in about 5-10 seconds.
Friday, January 3, 2014
Best Southwire 64169644 18/5 250-Feet 5 Conductor Thermostat Wire Deals
Customer Ratings: 
List Price: $105.50
Sale Price: $61.45
Today's Bonus: 42% Off

After upgrading my thermostat to a 'Nest', I discovered I needed an extra wire ('C' wire). My existing wiring only had 4 wires. This wire was easy to pull, easy to strip, and was a perfect gauge for the thermostat.
Not a lot to say about this, other than, if you need 5 wire thermostat wire then this is the one you should get.
List Price: $105.50
Sale Price: $61.45
Today's Bonus: 42% Off
After upgrading my thermostat to a 'Nest', I discovered I needed an extra wire ('C' wire). My existing wiring only had 4 wires. This wire was easy to pull, easy to strip, and was a perfect gauge for the thermostat.
Not a lot to say about this, other than, if you need 5 wire thermostat wire then this is the one you should get.
Saturday, December 14, 2013
Discount Masterbuilt 20070910 30-Inch Electric Smokehouse Smoker, Black
Customer Ratings: 
List Price: $299.95
Sale Price: $177.00
Today's Bonus: 41% Off

The Masterbuilt smoker is a wonderful product for the price. Whether you're new to smoking, or an experienced smoker who wants a less hands on, labor intensive smoke, this is simply the best you can get for the $$.
Pros:
1. Digital thermometer: If you've smoked much, you know keeping the smoker at the right temperature is often what takes the most attention. As an electric smoker with a built in thermometer, you can set your preferred temperature and then just focus on keeping the woodtray filled, the contents mopped, and you're good to go. (You will still want to use a digital thermometer on the meats themselves to check their internal temperatures, but that's a different matter.)
2. Well insulated: Unlike a traditional side smoker, bullet or most other form factors, the masterbuilt is nicely chunky and really doesn't care overly what the outside temperature is at (within reason)
3. Capacity: Four racks (though with chickens, big roasts, shoulders and ribs you may only end up using two at a time. Still, I've loaded it up 30+lbs of meat at a time which for a product that often drops under $200 when on sale, is not bad at all.
4. Economy: It runs on electricity and with small amounts of wood relatively speaking. Rather than going through large amounts of wood and charcoal, you have a much more affordable smoke, which if you want to smoke regularly (or smoke small batches) is great.
5. Customer Support: You'll find repeated reviews of this online, but Masterbuilt's customer support is second to none. Its hard to find companies that stand behind their products the way Masterbuilt does. If something is defective, they will fix it with little to no questions asked.
So why don't I give it a 5 stars?
1. Size: Masterbuilt has a 40" version, but it is very hard to find. Really, if they made the 40" the standard, that extra little bit of space would allow you to use all four racks more often even with larger cuts.
2. Temperature Range: The Masterbuilt only goes up to 275. This is excellent for red meats which will often cook between 220 and 250 and fish, but not as good for poultry, where you want it up to 350 to get the fat in the skin to render (and avoid chewy skin).
3. Power: The Masterbuilt's electric heater sometimes doesn't seem to have quite enough oomph if you really load it with meat. I've had a hard time keeping the temp up when its full. There are people online who add their own heating elements to help boost it.
4. Needs direct plug: Masterbuilt requires you plug directly into an outlet. So, given the relatively short electrical cable that means you need to install an outdoors outlet if you believe them. I did use it fine with an industrial extension cord, but talking to their customer support, they felt it might be a reason for problem #3 above.
So, what do you have? A great form factor for a smoker, with good capacity, that maintains a set temperature, with multiple racks for different products, and that gives a consistently result. On the other hand, they have a slightly larger product that is only distributed much more limitedly, and they have odd limitations on the product based on max temp and wattage to the heating element. Given the price difference between the Masterbuilt and its nearest competitors, perhaps these limitations are forgivable. I still regularly recommend it to friends, and have many, including some who run a couple of well respected restaurants loving the products that come out.
Things I'd love to see from Masterbuilt as aftermarket products or even just upgrades:
1. External smoke box that attaches to the wood feed hole, so that you can do cold smokes for sausages, cheeses and salmon and other products.
2. A higher wattage heating element that can be swapped out for the standard one.
3. A higher max temperature so I don't need to take the chickens and game hens out 30 minutes before done and toss them in the oven to crisp the skins.
Regardless, to come full circle. If you want to dabble in smoking and are intimidated (which is easy), this is a perfect smoker to make things easy. And if you are experienced in smoking and just want to have either a more affordable smoke so you can do it more often, or a less labor intensive one, once in a while, this is the perfect supplement to your existing set up.
From my research it seems the heating element is the one part that's most likely to fail, so you'd expect them to be replaceable. After reading in these Amazon reviews that the heating element of this model may not be replaceable, I swapped e-mail with a Masterbuilt rep and here's what I found.
The rep claimed the heating element can be replaced on all of their smokers, although some require a new body assembly and replacement parts are no longer made or stocked for some of their older models. All of the electric smokers sold on their website allow for replacement of just the heating element. The heating element of this model (#20070106) requires a new body. (sixty bucks plus s&h)
The rep made it clear that model #20070910 is their newest 'standard' 30" electric smoker, and it does allow for easy replacement of just the heating element. It's hard to find on their website, so just search the web for the model #.
The rep also told me there's no way to know when a particular smoker, and thus replacement parts, will be phased out. She said some of their models have been sold for over five years, implying that's a long time.
The following models were mentioned in our correspondence.
30" Electric Smokers
====================
> Model #20070106; sold here on Amazon.
For heating element replacement, you must replace the entire body and the customer can do this. The cost for the new body is $60.00 plus shipping and handling.
> Model #20070110; smoker with window and meat probe
The heating element alone can be replaced by the customer.
> Model #20070910; standard 30" edition
The heating element alone can be replaced by the customer.
40" Electric Smokers
====================
> Model #20070710; smoker with window and meat probe
The heating element alone can be replaced by the customer.
The rep I corresponded with was very helpful, and I still plan on purchasing a Masterbuilt smoker just not this one.
This used to be a five star review for Masterbuilt with me raving about the awesome customer service I received from them.
I hate to do this but times have changed and so has the service. I have read numerous accounts here and on a smoking forum I frequent of smoker owners with bad units being ignored. This is an awesome unit when it works but the weak link is the heating element and when it goes bad there is no replacement offered. This fault has been problematic since the first models and as far as I can tell not addressed. I'm guessing there are too many bad units in the field to repair now and the company is providing no solution or repair.
Before you buy check the warranty to see what the company will do for you should the element go bad. Maybe Masterbuilt will get back to taking care of the customer, I certainly hope so but seems now they have joined the majority of producers who only have eyes for the bank once the money is in their hands. Pity.
But I finally jumped in and made the purchase and could not be happier. First off, the Model number listed in the amazon listing, #20070106, is not the unit you receive. You actually receive Model 20070110. The newer model you can swap out the heating element if it fails. A huge plus.
I have had this unit for 4 weeks now and have made briskets, pork shoulder, and ribs. The unit is super simple to operate. Turn it on, set the time and temp, and add a small amount of wood chips every hour or two.
The smoker is well insulated. On a 40 degree day, it heated up to 275 degrees in about 40 minutes. I added my meat, lowered the temp to 225 degrees, and it easily maintained a temperature range of 215 to 225 for the entire 12 hour cooking period. On a 60 degree day, it preheated to 275 in about 20 minutes and again easily maintained temp even though it was very windy out. It also recovers quickly when you open the door to check on your food. The built in electronic thermometer is a nice touch. Shows you what the current smoker temp is. You can also run a remote temp probe through the vent in the top of the unit to monitor your meats internal temperature as it cooks.
The smoker puts out a moderate amount of smoke with a very small amount of wood chips. And it uses wood chips, no expensive wood disks. I choose to clean out the chip tray every 3 hours or so just to keep them from piling up in it. The smoker does a great job of hanging onto smoke too. You son't get a smoke ring, mainly because there is not enough carbon monoxide generated from the chips to pink up the outer layer of meat. Only wood and charcoal smokers will get you that. But the smoke ring offers no more flavor, just a smoke ring.
So far all the food I have made in this smoker has come out fantastic. Nice smoky flavor with very little work. You basically set it and add wood chips every now and then. The water pan keeps things nice and moist and the heating element keeps a nice even heat. Clean up is not too bad if you prep a bit first. Place foil in the water pan and in the drip pan. This will allow you to just take the foil off and give it a quick wash with soap and water. The racks do require a bit of scrubbing, nut that is to be expected. Just don't foil your racks. The interior is just wiped out with clean water, no soap.
So if you live in a colder climate, and are looking for an electric smoker, I would not hesitate to purchase this unit.
List Price: $299.95
Sale Price: $177.00
Today's Bonus: 41% Off
The Masterbuilt smoker is a wonderful product for the price. Whether you're new to smoking, or an experienced smoker who wants a less hands on, labor intensive smoke, this is simply the best you can get for the $$.
Pros:
1. Digital thermometer: If you've smoked much, you know keeping the smoker at the right temperature is often what takes the most attention. As an electric smoker with a built in thermometer, you can set your preferred temperature and then just focus on keeping the woodtray filled, the contents mopped, and you're good to go. (You will still want to use a digital thermometer on the meats themselves to check their internal temperatures, but that's a different matter.)
2. Well insulated: Unlike a traditional side smoker, bullet or most other form factors, the masterbuilt is nicely chunky and really doesn't care overly what the outside temperature is at (within reason)
3. Capacity: Four racks (though with chickens, big roasts, shoulders and ribs you may only end up using two at a time. Still, I've loaded it up 30+lbs of meat at a time which for a product that often drops under $200 when on sale, is not bad at all.
4. Economy: It runs on electricity and with small amounts of wood relatively speaking. Rather than going through large amounts of wood and charcoal, you have a much more affordable smoke, which if you want to smoke regularly (or smoke small batches) is great.
5. Customer Support: You'll find repeated reviews of this online, but Masterbuilt's customer support is second to none. Its hard to find companies that stand behind their products the way Masterbuilt does. If something is defective, they will fix it with little to no questions asked.
So why don't I give it a 5 stars?
1. Size: Masterbuilt has a 40" version, but it is very hard to find. Really, if they made the 40" the standard, that extra little bit of space would allow you to use all four racks more often even with larger cuts.
2. Temperature Range: The Masterbuilt only goes up to 275. This is excellent for red meats which will often cook between 220 and 250 and fish, but not as good for poultry, where you want it up to 350 to get the fat in the skin to render (and avoid chewy skin).
3. Power: The Masterbuilt's electric heater sometimes doesn't seem to have quite enough oomph if you really load it with meat. I've had a hard time keeping the temp up when its full. There are people online who add their own heating elements to help boost it.
4. Needs direct plug: Masterbuilt requires you plug directly into an outlet. So, given the relatively short electrical cable that means you need to install an outdoors outlet if you believe them. I did use it fine with an industrial extension cord, but talking to their customer support, they felt it might be a reason for problem #3 above.
So, what do you have? A great form factor for a smoker, with good capacity, that maintains a set temperature, with multiple racks for different products, and that gives a consistently result. On the other hand, they have a slightly larger product that is only distributed much more limitedly, and they have odd limitations on the product based on max temp and wattage to the heating element. Given the price difference between the Masterbuilt and its nearest competitors, perhaps these limitations are forgivable. I still regularly recommend it to friends, and have many, including some who run a couple of well respected restaurants loving the products that come out.
Things I'd love to see from Masterbuilt as aftermarket products or even just upgrades:
1. External smoke box that attaches to the wood feed hole, so that you can do cold smokes for sausages, cheeses and salmon and other products.
2. A higher wattage heating element that can be swapped out for the standard one.
3. A higher max temperature so I don't need to take the chickens and game hens out 30 minutes before done and toss them in the oven to crisp the skins.
Regardless, to come full circle. If you want to dabble in smoking and are intimidated (which is easy), this is a perfect smoker to make things easy. And if you are experienced in smoking and just want to have either a more affordable smoke so you can do it more often, or a less labor intensive one, once in a while, this is the perfect supplement to your existing set up.
Click Here For Most Helpful Customer Reviews >>
A friend of mine has a Masterbuilt smoker that looks very similar to this one and it works very well. His experience, along with everything I've read is very positive for all Masterbuilt smokers, with the notable exception of heating element replacement. Given that, my decision on which model to purchase will be based on whether the heating element can be replaced without replacing a large segment of the smoker.From my research it seems the heating element is the one part that's most likely to fail, so you'd expect them to be replaceable. After reading in these Amazon reviews that the heating element of this model may not be replaceable, I swapped e-mail with a Masterbuilt rep and here's what I found.
The rep claimed the heating element can be replaced on all of their smokers, although some require a new body assembly and replacement parts are no longer made or stocked for some of their older models. All of the electric smokers sold on their website allow for replacement of just the heating element. The heating element of this model (#20070106) requires a new body. (sixty bucks plus s&h)
The rep made it clear that model #20070910 is their newest 'standard' 30" electric smoker, and it does allow for easy replacement of just the heating element. It's hard to find on their website, so just search the web for the model #.
The rep also told me there's no way to know when a particular smoker, and thus replacement parts, will be phased out. She said some of their models have been sold for over five years, implying that's a long time.
The following models were mentioned in our correspondence.
30" Electric Smokers
====================
> Model #20070106; sold here on Amazon.
For heating element replacement, you must replace the entire body and the customer can do this. The cost for the new body is $60.00 plus shipping and handling.
> Model #20070110; smoker with window and meat probe
The heating element alone can be replaced by the customer.
> Model #20070910; standard 30" edition
The heating element alone can be replaced by the customer.
40" Electric Smokers
====================
> Model #20070710; smoker with window and meat probe
The heating element alone can be replaced by the customer.
The rep I corresponded with was very helpful, and I still plan on purchasing a Masterbuilt smoker just not this one.
Best Deals on Masterbuilt 20070910 30-Inch Electric Smokehouse Smoker, Black
Hello Folks,This used to be a five star review for Masterbuilt with me raving about the awesome customer service I received from them.
I hate to do this but times have changed and so has the service. I have read numerous accounts here and on a smoking forum I frequent of smoker owners with bad units being ignored. This is an awesome unit when it works but the weak link is the heating element and when it goes bad there is no replacement offered. This fault has been problematic since the first models and as far as I can tell not addressed. I'm guessing there are too many bad units in the field to repair now and the company is providing no solution or repair.
Before you buy check the warranty to see what the company will do for you should the element go bad. Maybe Masterbuilt will get back to taking care of the customer, I certainly hope so but seems now they have joined the majority of producers who only have eyes for the bank once the money is in their hands. Pity.
Honest reviews on Masterbuilt 20070910 30-Inch Electric Smokehouse Smoker, Black
After reading several complaints about the heating elements failing in these units and the inability to replace these elements, I was very leery about buying one.But I finally jumped in and made the purchase and could not be happier. First off, the Model number listed in the amazon listing, #20070106, is not the unit you receive. You actually receive Model 20070110. The newer model you can swap out the heating element if it fails. A huge plus.
I have had this unit for 4 weeks now and have made briskets, pork shoulder, and ribs. The unit is super simple to operate. Turn it on, set the time and temp, and add a small amount of wood chips every hour or two.
The smoker is well insulated. On a 40 degree day, it heated up to 275 degrees in about 40 minutes. I added my meat, lowered the temp to 225 degrees, and it easily maintained a temperature range of 215 to 225 for the entire 12 hour cooking period. On a 60 degree day, it preheated to 275 in about 20 minutes and again easily maintained temp even though it was very windy out. It also recovers quickly when you open the door to check on your food. The built in electronic thermometer is a nice touch. Shows you what the current smoker temp is. You can also run a remote temp probe through the vent in the top of the unit to monitor your meats internal temperature as it cooks.
The smoker puts out a moderate amount of smoke with a very small amount of wood chips. And it uses wood chips, no expensive wood disks. I choose to clean out the chip tray every 3 hours or so just to keep them from piling up in it. The smoker does a great job of hanging onto smoke too. You son't get a smoke ring, mainly because there is not enough carbon monoxide generated from the chips to pink up the outer layer of meat. Only wood and charcoal smokers will get you that. But the smoke ring offers no more flavor, just a smoke ring.
So far all the food I have made in this smoker has come out fantastic. Nice smoky flavor with very little work. You basically set it and add wood chips every now and then. The water pan keeps things nice and moist and the heating element keeps a nice even heat. Clean up is not too bad if you prep a bit first. Place foil in the water pan and in the drip pan. This will allow you to just take the foil off and give it a quick wash with soap and water. The racks do require a bit of scrubbing, nut that is to be expected. Just don't foil your racks. The interior is just wiped out with clean water, no soap.
So if you live in a colder climate, and are looking for an electric smoker, I would not hesitate to purchase this unit.
Find helpful customer reviews and review ratings for Masterbuilt 20070910 30-Inch Electric Smokehouse Smoker, Black
I bought this smoker in April. Out of the 4-5 times I have used, I have gotten no smoke. My chips do not burn. I called Masterbuilt customer service twice. The first time, they told me to soak my chips only 15 minutes prior to cooking. Today after a roast cooking for 5 hours at 220 degerees with no smoke, they told me to not soak them at all. Seems to be a bigger problem with the element. My chips get dark but do not smolder. Masterbuild will do NOTHING about it. I am perplexed by the positive reviews and would assume I got a lemon! Out the smoker and about $50.00 worth of meat. Thanks Masterbuilt!Wednesday, November 6, 2013
Review of Sausage Maker Stainless Steel Food Dehydrator
I have had experience with one other food dehydrator. I won't mention the name, but it had a pretty well known informercial years go. That food dehydrator compared to the one made by Sausage Maker are worlds apart.
Everything I've dehydrated in my new Sausage Maker Dehydrator has been excellent. The design is simple, but effective. I also like the fact that it is all stainless steel which, in my opinion, has a much nicer look than plastic dehydrators. The only minor complaint I have is that it seems to dry things faster in the rear of the dehydrator rather than the front, which is to be expected since that's where the heat coils are placed. Although the difference is noticeable, it's not a tremendous difference. Overall I am extremely satisfied with this purchase.
Everything I've dehydrated in my new Sausage Maker Dehydrator has been excellent. The design is simple, but effective. I also like the fact that it is all stainless steel which, in my opinion, has a much nicer look than plastic dehydrators. The only minor complaint I have is that it seems to dry things faster in the rear of the dehydrator rather than the front, which is to be expected since that's where the heat coils are placed. Although the difference is noticeable, it's not a tremendous difference. Overall I am extremely satisfied with this purchase.
Subscribe to:
Posts (Atom)