Showing posts with label remote controlled thermostat. Show all posts
Showing posts with label remote controlled thermostat. Show all posts

Wednesday, February 11, 2015

Bionaire BFH3520-U Digital Convertible Tower Heater Reviews

Bionaire BFH3520-U Digital Convertible Tower Heater
Customer Ratings: 2 stars
List Price: $79.99
Sale Price: $34.80
Today's Bonus: 56% Off
Buy Now

The noise level when this product was on was blocking the sound from the TV in the same room....much too noisy to have in the house....it was taken back to the store for a quieter model from a different manufacturer.

Click Here For Most Helpful Customer Reviews >>

My furnace went out this weekend and nobody was open with the part in stock so I went down to the store and picked up one of these babys from a local merchant to get by until Monday. To be brief, its going back. I have a Lasko tower unit that was running in the other room about 12 feet away and sitting next to the Lasko I could hear the Bionaire over it. Just hope I can sleep with it running in my room.

Best Deals on Bionaire BFH3520-U Digital Convertible Tower Heater

i went to the local Home Improvement store and purchased this heater. This heater is really loud i could not sleep with it in the room needless to say i packed it up and took it back

Honest reviews on Bionaire BFH3520-U Digital Convertible Tower Heater

We received this heater as a wedding gift in 2008. We use it intermittently in the fall and spring to heat up our cold bathroom before washing our kids. When I unplugged it the other night the cord was extremely hot and the area around the prongs was burned. The heater had been on for less than an hour. If this was plugged in near a carpet or curtain it would have caught on fire. I agree that it is loud too, but my babies loved the white noise.

Find helpful customer reviews and review ratings for Bionaire BFH3520-U Digital Convertible Tower Heater

It's very loud and none of the timer or temperature controls work on it. It does heat up the room, but does not do all that it says it does. Also, mine did not come with a remote.

Buy Fom Amazon Now

Tuesday, December 23, 2014

Reviews of Kenmore Whirlpool dryer timer 3976569 Model M460-G

Kenmore Whirlpool dryer timer 3976569 Model M460-G
Customer Ratings: 4 stars
Buy Now
This was the exact part that was stated and it worked perfectly in my dryer. Laundry was up and going in no time!

Click Here For Most Helpful Customer Reviews >>

The part looked worse than my old one. It worked at first but now it is doing the same thing my old one did. My dryer is tore up again with the same problem. It didn't last very long for what I paid for it.

Best Deals on Kenmore Whirlpool dryer timer 3976569 Model M460-G

Replaced a burned out thermostat and thought that would be it, but found we needed a timer too...poor dryer...after 3 boys and 15 years, it finally said no more. It's been a great one and after replacing this part (and the thermostat) it works like brand new again...even if it doesn't look like it! What do you expect in an all male household with only one female to keep them from tearing it down tussling down the halls and such!

Buy Fom Amazon Now

Sunday, December 14, 2014

Reviews of Cuisinart CWT-240 19-by-12-Inch Warming Tray

Cuisinart CWT-240 19-by-12-Inch Warming Tray
Customer Ratings: 5 stars
Buy Now
The actual function of this warming tray is perfectly fine. What I did not appreciate is that one of the legs is slightly shorter than the other three, and of course there is no way to adjust the height. It's an easy fix to put something under the leg, but I didnt buy a high end product so I would have to play with it every time I use it.

Click Here For Most Helpful Customer Reviews >>

Very high quality. Sits perfectly level on the counter. Thanks to its rubber legs it is not easily moved if bumped. Does a great job!

Best Deals on Cuisinart CWT-240 19-by-12-Inch Warming Tray

Cooking is not allowed on Shabbat, but keeping cooked food warm during Shabbat (and in some cases, warming up cooked food that is cold) is not only permissible, but considered part of the mitzvah of making Shabbat a delight. There are three techniques one can use to keep food warm.

The first option is to use a "blech" (from the German by way of Yiddish word for tin or sheet metal). It is a metal sheet used by many observant Jews to cover stovetop burners (and for some, the knobs/dials too) on Shabbat (the Jewish Sabbath), as part of the precautions taken to avoid violating the halachic prohibition against cooking on the Sabbath. The burners under the 'blech' can be set to low and will stay on throughout the sabbath. Food that is already cooked can be placed on top of the 'blech' and warmed.

Another option is to set the oven to a very low temperature (200 Degrees F)and put casseroles and pots with food in the oven to keep them warm.

The third option is to use an electric warming tray. This warming tray was purchased for the purpose of keeping food warm on Shabbat. The temperature stays low enough that food cannot be cooked, but warm enough to keep food warm, especially nice on a cold, winter night. The tray is well made, and easy to clean. It is also large enough to keep several dishes warmed. Overall, an excellent tray that met our needs perfectly.

Honest reviews on Cuisinart CWT-240 19-by-12-Inch Warming Tray

The Cuisinart Warming Tray was intended to replace a very old and very familiar workhorse. My old warming tray was very functional and was used for every special dinner or party before it finally died after years of use. I was unable to find a store anywhere in my area that had any sort of warming trays. I found this one at Amazon, and I have not been disappointed. It is a wonderful addition to my kitchen. It is just a bit smaller than my old unit, so does not house as many dishes. By the same token, the smaller footprint allows more counter space. It does not have a "hot spot" (for gravies and such)as my old one did (and which I miss), but the tray keeps everything piping hot. It is a lovely, sleek addition to the counter top. I feel certain that I will get many years of excellent service from this device, which joins many Cuisinart appliances in my kitchen.

Thank you

Find helpful customer reviews and review ratings for Cuisinart CWT-240 19-by-12-Inch Warming Tray

This very clean designed Warming Tray replaced two smaller older Sulton "Hot Trays" that were from my mother's kitchen in the 1970's. Unlike the older trays, the CWT-240 has clearly marked and accessable tempature controls in the front that actually change the tempature from 150F to 200F. Great for keeping pizza hot or bread warm.

At 19 by 12 inches, the tray is fairly imposing and dominates the table where it is located so it would be wise to measure where you will be using it.

Buy Fom Amazon Now

Thursday, November 20, 2014

Cheap Lasko 5165 Digital Ceramic Tower Heater with Remote Control

Lasko 5165 Digital Ceramic Tower Heater with Remote Control
Customer Ratings: 3.5 stars
List Price: $66.69
Sale Price: $48.99
Today's Bonus: 27% Off
Buy Now

This heater works perfectly. Some of the other reviews on here mention specific negatives, and I suggest that those people read the fine manual. For example:

Comment: "The Thermometer is inaccurate by a few degrees in most."

Correct. If you read the instruction manual, it states that the heater will heat two degrees above the thermostat setting, then switching off. It will switch on again when the temperature falls one degree below the thermostat setting. This is actually how most thermostats work.

Comment: "The power cable is thinner than what other leading safe room heaters have."

I am not sure what this means. A power cable's gauge (thickness) will be proportional to the current (amperage) by which it is engineered to draw. The thickness of the copper wiring does not correspond to safety, and would only become a safety issue if the thickness of the wire were not rated for the current of which the appliance draws. I would hope to assume that the engineers at Lasko are well aware of the very established standards for wire gauge versus current drawn, and without wasting my time analyzing the gauge of wire and the appliance's current, I'm going to assume that it's more than adequate.

Comment: "this tower fan will not heat a large room effectively."

Correct. The appliance is rated for medium sized rooms, as stated on the packaging.

Comment (paraphrased): "The thermostat (auto-temperature) only works on high."

This is incorrect. Please read the manual. Switching from high to low is also the mechanism by which you disengage the thermostat. If you switch from high to low, or from low to high, then you simply need to push the (+) or (-) thermostat buttons to re-engage the thermostat. The thermostat functions on both high and low.

Conclusion:

This heating appliances works great, and it functions in accordance with the manual. A recommended purchase.

Click Here For Most Helpful Customer Reviews >>

Worked great all winter! Was used a supplementary heater in daughters room over finished garage. This could have heated the room all by itself. Looking forward to long durability thanks to the ceramic elements. If you like the look, features, and price.. buy it!

Best Deals on Lasko 5165 Digital Ceramic Tower Heater with Remote Control

Scroll down to read:

1) My ORIGINAL REVIEW of this product (at that time I gave it four stars)

2) My LATER REVIEW (dropping to three stars)

----------------------------------------------------------------------------------------

ORIGINAL REVIEW:

The main things I LIKE about this little heater are:

* It has quiet operation, and heats up a room very fast.

* I also like the design, it's simple and easy on the eyes, and like how lightweight it is. Even a two year old could lug this around without getting tired out.

* It has an easy-carry handle built in.

* It heats quickly and the oscillating feature distributes the heat nicely. It does an efficient job of turning electrical energy into heat.

The main thing I DISLIKE about it, which I'd imagine would be a major concern in a house with pets or small children, is that it doesn't turn off when knocked over. This could be extremely hazardous. It's not an issue for me because I place it in an area where it's not going to get knocked over. But if a friend with a young boisterous child dropped over, I would unplug it first. There's also a bit of a smell to the one I just bought today when it's in use, but I expect that's because it's new and it will burn off. The old one doesn't have a smell.

I also don't like that you have to use it on full power (1500 watts) to use the thermometer feature. I don't need that much heat and don't want to blow out a circuit breaker, so I prefer using it on the 750 watt setting...but that means I don't have the thermometer option. The easy timer feature does work in both modes, so I just set it for an hour and forget it. So this isn't a deal breaker for me.

By the way, I saved over $2000 last winter by using electric heaters in the coldest weather, instead of heating with oil. (That's not a typo... I saved over two grand.) The savings come from both the fact that electricity is currently cheaper than heating oil (which gets outrageously expensive), and, using small heaters allows a person to only heat the rooms that are in use. In the winter I use the furnace in the morning for ten minutes to take the chill off of the air, and in the evening for the same reason. I have these two Lasko heaters and two oil-filled heaters, which I use in various rooms in the house to keep it warm and toasty. It is a HUGE savings over the cost of oil. The house stays warm enough that I don't need a shirt or shoes, and I'm saving a huge amount of money in the process.

------------------------------------------------------------------------------------------------------------------------------

UPDATED REVIEW (November 20120

I'm changing my review from 4 stars to 3 stars.

A year after buying this model, I needed a second heater for another room, so I bought one with the same specs. Same name and model number. Should work well, right?

Wrong. The new one "looks" the same from a distance but are not identical. The new one is a little smaller and the color of the plastic casing is a little different. Evidently there was a redesign after I bought the first one, and different materials are being used.

If that was the only issue, I'd still be giving it four stars. (Last year's model still works great.) But the new one had severe problems. It worked twice, for a half hour or so each time. Then the third time I turned it on, it developed an extremely loud, obnoxious fan with a grinding sound, like the sound of a loud kitchen blender or food processor going full tilt. Not exactly a relaxing fan sound. I don't know if this is a one-time flaw, or if when Lasko did the redesign, they went with cheaper materials, like a cheap fan that would fall apart after being used one or two hours of use. Whatever --I took it back to Target, where I bought it, and got a refund.

It's a shame because the one I bought last year is still working well. But the new one got less than two hours of use out of it before going kaput.

While I can't say for sure, I suspect that the problem is that Lasko went with cheaper materials this time round. It saves them a few dollars but at the cost of consumers dealing with problems after purchasing it. Or maybe it was just a fluke and I got one with a bad fan. But it's made me cautious about buying from Lasko again.

Honest reviews on Lasko 5165 Digital Ceramic Tower Heater with Remote Control

I have two Lasko remote towers Model 5538 from 2010 or 2011 that still work without a problem. Purchased two Lasko Ceramic Heaters, Model 5165 from Target in November 2012. I paid $49.99 plus 8% tax for each device for a total of $I07.98. plugged one unit in and noticed it began to make a noise. After one week I noticed the cord began to over heat when in the HI position. It eventually overheated and melted the electrical outlet. I immediately removed the cord and contacted Target to let them know this device is defective. I will also contact Lasko via email.

This product NEEDS TO BE REMOVED from the market BEFORE IT BURNS SOMEONE'S HOME DOWN. If left unattended, the electrical outlet will overheat causing internal wiring to catch fire in homes that do not have AFCI breakers or outlets. AFCI (Arc Fault Circuit Interrupters) outlets will short the wiring before it catches fire. Most homes built prior to 2010, do not have these upgraded breaker panels or wall outlets.

I took a photos of the burnt cord, the ceramic heater, original box and the damaged outlet. Did not see a manufactured date on the product or instruction manual. I immediately contacted the store, explained the problem, then contacted Lasko. I returned the products for a full refund, as I was too scared to try the second unit and gave Lasko 7 days to respond to my email.

It took me to contact cpsc.gov or Saferproducts.gov for Lasko to leave me a message. I place several calls to reach Lasko consumer complaints. The employee did not immediately return my telephone call. When I spoke to him, he was more concerned with getting his hands on the product, asking for the telephone number to the store to have them retun those units to Lasko. Then he tried to blame me, telling me I needed to upgrade the wiring in my home to accomodate these heaters. Really? If that is the case, a warning should be clearly posted on the outside of the box advising the public that if they do not have AFCI breakers and recepticles in their home, do not use or purchase these heaters. If you buy or own this heate, "Don't let FIRE be your interior decorator."

Find helpful customer reviews and review ratings for Lasko 5165 Digital Ceramic Tower Heater with Remote Control

I Have always had good luck with Lasko heaters, especially with the remotes. This one, although it is a great heater, it rattles really badly, and I hate that. It is a brand new heater, shouldn't rattle until at least a year old :((

Buy Fom Amazon Now

Sunday, November 2, 2014

Buy BriskHeat ECONO55-1 ECONO Metal Drum Heater, Fits 55-Gallon Drums

BriskHeat ECONO55-1 ECONO Metal Drum Heater, Fits 55-Gallon Drums, 2-Layer Reinforced Silicone Rubber, W x L: 3.6 x 70-Inch, Diameter: 22.3-Inch, 120VAC
Customer Ratings: 3 stars
Buy Now
This is the best drum heater on the market for the price. I have purchased many other brands for the company I work for and none of them hold up as well as this brand.

Click Here For Most Helpful Customer Reviews >>

I found that the thermostat was very unreliable. I couldn't get it to stay at a warm setting where I needed it. Instead it got hot and ruined the material in the drum. I won't buy another.

Tuesday, October 21, 2014

Buy Cadet Manufacturing 67507 240-Volt White Com Pak Fan Forced

Cadet Manufacturing 67507 240-Volt White Com Pak Fan Forced Electric Wall Heater, 2000-Watt
Customer Ratings: 3 stars
List Price: $161.99
Sale Price: $104.30
Today's Bonus: 36% Off
Buy Now

I manage several buildings that feature these, They are very common in apartments and they work very well. Lots of heat, pretty low noise, and they take up very little wall space; just don't place furniture too close to them and vacuum the grill out once a year. These are often run by a wall thermostat; over-riding the built-in one.

Click Here For Most Helpful Customer Reviews >>

I ordered this as a replacment for a failed unit. It was an exact match and installed easily in place of the old one within minutes. The prior unit failed after we had the house for four years. And I believe the original unit was installed a few years before we bought the house. So it lasted 4+? years.

Best Deals on Cadet Manufacturing 67507 240-Volt White Com Pak Fan Forced

Cadet #67507 2000W Wall Fan Heater Plenty of heat, wish the forced air fan was bigger. If I were to buy one again I think I would have gone with the next size bigger from Cadet. I have one in my family room and love it, this one just doesn't blow the hot air. I worry about it over-heating.

Honest reviews on Cadet Manufacturing 67507 240-Volt White Com Pak Fan Forced

NEVER order from this company Kathy & Dennys THREE TIMES I gave them the right address THREE TIMES they mailed it to the wrong one. NOT even the right state. As far as heater goes who knows never got it...

Find helpful customer reviews and review ratings for Cadet Manufacturing 67507 240-Volt White Com Pak Fan Forced

I have Cadet wall heaters in my apartment. One of these 2000 watt units in the living room, two 1000 watt units in the 2 bedrooms.

As far as I can tell, the thermostats are useless. Just as an example:

I have one of the 1000 watt units turned on in my bedroom right now. The room is 68-69 degrees. If you turn the thermostat all the way down to shut the heater off, and then turn it up until the heater turns on, it turns on at about 62 degrees. If you then turn it down until the heater goes off, it turns off at about 54 degrees.

That's an 8 degree swing. And the setpoints are WAY off from the actual temperature in the room.

I don't understand why I don't see a lot of complaints on the internet about this kind of heater. I don't think it's just Cadet, I think it's the particular type of thermostat, no matter who the manufacturer. I believe these are what are called "bimetallic" thermostats. As far as I can tell they are utterly useless. All they are good for is as an on off switch.

At least that is my opinion based on my own experience. If I'm missing something, someone please point it out to me.

Has anyone ever been actually able to control the temperature within a reasonable range with these? If so please speak up and explain how you were able to do so.

Buy Fom Amazon Now

Sunday, October 12, 2014

Discount Hunter 44668 Comfort Saver 7 Day Room Control Thermostat

Hunter 44668 Comfort Saver 7 Day Room Control Thermostat
Customer Ratings: 3 stars
List Price: $103.99
Sale Price: $98.50
Today's Bonus: 5% Off
Buy Now

I have nothing but problems with the 44668 thermostat. I had the first one for less than a month and it started resetting itself. Hunter replaced it with a second one which after a few weeks lost communication with the remote sensor (had to reset unit), left the blower running in the house (had to reset unit), and finally stopped controling the system with an error 004. (Hunter Customer service didn't know what error 004 even meant).

Refusing to refund my money, Hunter is now sending me a third one. I politely told them that if I had problems with that one, I would escalate my problem within Hunter to demand my money back.

By the way, I ordered this through Amazon and CPO who is a Hunter distributor and I would like to point out their ridiculous '30 day money back guarantee' copy and pasted it says:

"All unused items can be returned within 30 days of shipment for a refund or exchange (unless otherwise noted at the time of sale). Items must be returned in their original packaging. If an item was shipped free of charge you will be billed for the cost of the original shipping."

Note the word 'unused'. How do you see if you like a thermostate, much less if it works properly, without using it? Statements like this discourage people from buying through the internet. I would have bought this at local retail but I couldn't find this particular model. If I had, it would be back to the store and I would have my money back.

I usually don't write reviews like this, but so far my experience with Hunter has been less than stellar.

I'll see if the third one works (which by the way takes almost two weeks for them to send).

TJ

9/15/09

Well, this saga started last May and I still can't get one of these thermostats to be reliable. I have tried three of them now and as of yesterday Hunter Customer Service is refusing to refund my money. I could write a book over what has occurred between now and last May when this started, but suffice to say that the people at Hunter Customer service in Memphis Tn are pretty useless and will say anything to try and make you go away. I could name names, but I won't. My last conversation was with one of the supervisors.

This morning I filed a formal complaint with the Tennessee Department of Consumer Affairs to see if they can mediate a solution for this. Its unfortunate that a company like Hunter who generally has such a good name for quality is being ruined by a bunch of incompetent people at their customer service center.

TJ

Click Here For Most Helpful Customer Reviews >>

I just bought two of these for only $69.95 each at my local Sam's Club. My problem with my regular thermostats is that they're located in the hallway/living area which are in the middle of my 2 story home. At night, the bedrooms (on the sides of my home) become either colder in the winter or hotter in the summer than the middle of the house so the thermostats don't control the bedroom temperature well. With this thermostat, I can program it to control the heater/AC by using the wireless remote sensors I keep in the bedrooms, making the bedroom temps just right. The thermostat also has it's own temperature sensor built in. During the day, we are mainly in the hallways/living areas so I have the thermostat use it's own temperature to regulate the living area temperature. Also, another awesome feature is this thermostat doesn't need someone to turn on the heater during the winter or the AC in the summer. You set it to turn the heater on if it's below a certain temp, say 72 and turn the AC on if it's too hot, like say 78. So your house will always stay between 72 and 78! It doesn't matter if you suddenly have a cold or hot spell in the spring time, the thermostat will accurately provide hands-free control of the heater/AC.

It also tells you to change the air filter after 500 total hours of heater + AC time.

The only reason I didn't give it 5 stars is I had 1 defective remote sensor. My thermostat wouldn't pick up the defective remote sensor temperature. After debugging it for 1 hr, I called tech support and after 3 minute of talking with tech support, they agreed with me that it was defective and I had to exchange for a new one. I didn't have any thermostat program resetting problem like the other reviewer.

Best Deals on Hunter 44668 Comfort Saver 7 Day Room Control Thermostat

Ok, here is the deal. I love the remote temperature sensor. It really compensates for only having one unit in a two-story house. However, for some reason the main unit arbitrarily resets its self or changes settings. I spent over an hour setting up a custom program and within a couple of weeks the unit reset and went back to factory defaults. I repeated the process only to have the same reset problem days later. I now have it set at 70 and leave it alone.

I am still happy with the second sensor but feel like the programmability option is a waste. I have called customer service but hung up before getting to a real person. I will be calling them again when I have more time to waste.

Honest reviews on Hunter 44668 Comfort Saver 7 Day Room Control Thermostat

I'll give you the summary first, because my review became quite long: After one day with this unit, I will say that it's a great thermostat. Programming it is fairly intuitive. If you need remote sensors because of lousy thermostat positioning or because you want to set up multiple heat zones in your house, this is the thermostat for you. My complaints are with the documentation, which is quite poor.

The full review: I received and installed my Hunter 44668 last night, and everything has gone smoothly so far. I'm pretty impressed. I would give this product a 5-star review, but the user's manual knocks it down to 4-stars overall. If I was rating it on the user's manual alone, I would only give that 2 stars. I can definitely understand why other people have complained.

There are inconsistencies and omissions in the manual that should never have made it to the publisher. It's like the manual was written by a college intern and never proof-read. Sometimes the button you're supposed to press is shown in-line with the text of a particular step. Sometimes the button is shown in a column to the left of the instruction steps. Sometimes the buttons pictured in the left column don't line up with the steps in which they're supposed to be pressed. Sometimes the button picture is missing entirely, and the button you're supposed to press has to be inferred from the section title! It's a complete disaster.

I was lucky because I had read through the entire manual TWICE before I tried to program the thermostat--I read it once online before I bought it because I wanted to see what people's reviews were talking about, and then again a couple days later after it arrived, before I tried to program it. By the time I got around to pushing buttons, I had come to terms with some of the inconsistencies in the manual, and was prepared to compensate for them during programming. The process went pretty much flawlessly, and I actually got the unit installed and running in record time (for me).

I figure there are probably 3 types of people installing this unit... 1) people with lots of previous experience installing setback thermostats who will only bother to look at the manual as a last resort if the unit does something unexpected, 2) people who take the time to study the manual and work through its shortcomings, and 3) people who are going to depend on the manual to be correct because they're reading it for the first time and following it step-by-step as they try to install it and program it. The first group will be fine, because the actual setup is pretty intuitive if you've installed these things before. The second group will be fine, as I've demonstrated myself. But if you're in the third group, this thermostat is likely to frustrate you massively, and I would actually recommend avoiding it based on that.

So what do I like about this thermostat? I like the remote temperature sensors! I have a counterflow furnace in my house, which means the heat registers are in the floors and the cold air return is in the ceiling. Some wise guy mounted the thermostat in the hallway directly under the cold air return. There is literally a wall of cold air exactly where the thermostat is mounted, and at that location no thermometer is capable of determining with any accuracy the actual temperature of the house. As soon as the furnace shuts off, the attic cools the cold air return duct, and cold air starts falling out of the ceiling right onto the thermostat. When the furnace runs, it can raise the temperature of the rest of the house 6-8 degrees. But with that wall of cold air in the hallway, the thermostat won't budge a single degree! I needed to get the thermometer out of the hallway. However, I didn't want to yank the wire up out of the wall and fish it down in another wall somewhere else to move the thermostat. The remote sensor included with the 44668 is exactly the solution I need.

If you're buying this thermostat specifically to use the remote sensor, then one thing you need to realize up front is that the remote sensor comes pre-configured as an outdoor thermometer and NOT as an indoor thermostat. Step one, while you're working through the Options prior to programming, is to reconfigure the base unit to correctly recognize the sensor as an indoor sensor. Once I got that straight, the programming went smoothly.

Next, the omissions. One cool feature of this thermostat is that for any given program setpoint, it can read a single sensor or an average of multiple sensors. This isn't fully explained anywhere in the manual, it gets only the briefest of mention. You control the feature with the "sensor" button, and at any point while programming the unit, you can press the sensor button to walk through all the options for that setpoint. The options are: the built-in sensor (BI), remote sensor 1 (R1), remote sensor 2 (R2), BI+R1, BI+R2, R1+R2, and BI+R1+R2. Very nice, but not in the manual. And there doesn't seem to be any guard against choosing sensors that don't exist. For instance, all the R2 options were available on mine, even though I don't have an R2 running.

Another omission in the manual is the jumper wire supplied in the baggie with the screws and wall anchors. OK, it's red-colored. That's as much info as you get (assuming you're not color blind), because it's presence is not mentioned anywhere in the section about wiring the unit. In the back of the manual, where the wiring diagrams are shown (why are the wiring diagrams separate from the wiring instructions?), the jumper is shown wired between the RH and R1/RC pins in FIVE of the six wiring methods pictured, even including the 2-wire heat-only setup that my house uses! But is it supposed to be there or not? Does the thermostat get damaged if it's not present? I have no idea whatsoever. The instructions didn't say to install it, so I didn't, and my furnace is running. I just have to hope no damage is being done. Unanswered questions.

So, if you've managed to read this far, I'll finish with one subtle point I haven't seen anyone else talk about... The display backlight. This unit has an electroluminescent display backlight (think Timex Indiglo), and it works great. A nice feature. However, the manual says the backlight is *powered* by the 24V power from the furnace. The manual doesn't come right out and say it, but the way I read it, if you have a millivolt control system, you're out of luck. The display backlight won't work for you at all. Something to be aware of.

Find helpful customer reviews and review ratings for Hunter 44668 Comfort Saver 7 Day Room Control Thermostat

This product was just what I wanted. At night we only wanted to heat the bedroom with a small space heater and let the rest of the house stay cool. We programmed the unit to regulate via the remote sensor during sleeping hours and now the furnace keeps the rest of the house cool while our room stays toasty with the small monitor heater. Before it was a balancing act to keep the room regulated, then the furnace would kick on and the room would get way too warm.

Many people have claimed the unit is very hard to program. It is virtually the same as other programmable thermostats I have used. The most important part is to write down what you want the program to do before you start programming. Then take it 1 day at a time.

The only confusion I had was setting up the remote sensor. At first I could not select the symbol for "T1" (the auxillary sensor) for my nighttime program hours. The unit came pre-programmed as if the extra sensor was to read outside temperature. You cannot program the furnace based on outside temperature or it would run constantly! I had to go to the options menu and change the sensor settings. I changed the outdoor temp sensor channel to -(meaning no outdoor sensor) and that the external "T1" sensor was channel 15 (the channel on the display of my auxilary sensor). If you have 2 or 3 extra sensors, then you have to set each temperature to the corresponding channel on the various sensors. After I set the sensor up correctly, it allowed me to select "T1" for my nighttime program.

Again, decide what you want to do before diving into the programming. What worked best for me was using the "everyday" programming mode to set up all of the days the same. Then I went back through each day and made small adjustments based on our schedules.

It works like a charm and at this price, there is no other comparison to it. Even a standard 5-2 programmable thermostat will cost more! Kudos to MarkDownAlley for good pricing and fast delivery!

Buy Fom Amazon Now

Friday, September 26, 2014

Review of Optimus H-1322 Portable 2-Speed Fan Heater with Thermostat

Optimus H-1322 Portable 2-Speed Fan Heater with Thermostat
Customer Ratings: 4.5 stars
Buy Now
This little heater didn't look like much on the shelf at the store where I bought it--plastic casing looked flimsy, and I worried it wouldn't last. The 3-year warranty, however, gave me a boost of consumer confidence, and I decided to give it a shot. When I got home and took it out of the box, I was disappointed. The casing indeed looked flimsy, and I expected the unit be bigger, especially in terms of depth, based on the dimensions of the box.

I was surprised then when it turned out to pack quite a punch! It warmed up its surroundings immediately, and I ended up leaving it on all night--it kept the room comfortably warm all night. It doesn't seem flimsy at all any more--just a lightweight unit that does a surprisingly good job! With confidence borne of the 3-year warranty, I'm entirely satisfied with my purchase. I'm glad I took a chance on this little heater.

Click Here For Most Helpful Customer Reviews >>

IT is ok, but not as nice and warm as the radiant Optimus I bought last year but was recalled. It is nice and small, good right next to my chair and I do like the cooling fan part in case It gets a little to warm in the room. Very light weight and easy to use.

Buy Fom Amazon Now

Thursday, September 4, 2014

Best Koolatron TCXU-24 Total Chef Automatic Coffee and Wine Urn 24-Cup Deals

Koolatron TCXU-24 Total Chef Automatic Coffee and Wine Urn 24-Cup Capacity, Silver
Customer Ratings: 2.5 stars
List Price: $98.97
Sale Price: $89.95
Today's Bonus: 9% Off
Buy Now

I have owned two (2) of these 24-cup coffee urn products, over the past 3+ years. The first one began leaking at about the end of the first year, so we liked the product enough to locate and purchase our second unit. The second urn worked well for about ten (10) months, but, this past week the device that controls the flow of liquid from the urn broke. Although we can still make our coffee, we must now LADDLE IT OUT OF THE URN. Not the best way to start one's day, I'm very sure.

I've had the device completely disassembled and attempted to repair the faulty item (it is a clear plastic unit, rather barrel-shaped, with a slot that allows the fliud to be discharged when the barrel is turned to the opening. The shaft that connects to the lever on the outside of the urn has snapped off and will not accept any of the glueing products that I've tried, attempting to repair it (even tried to re-enforce the device, inside, to no avail).

Since this is my second urn, and the problem is NOT A REPEAT OF THE PROBLEM IN THE FIRST URN, I feel the consumer should be aware that the life expectancy of these products seems to be far less than the average consumer might expect, for an in-home electronic appliance, and incredibly short for any possible commercial use.

When working, the product was more than satisfactory, but, the unexpectedly short projected life of the product should be noted on the product, and/or these faults should be reflected in the pricing of the unit(s). If I could have found a parts supplier, I might not be so negative about the product either, but, having to purchase a new unit EVERY YEAR seems totally unfair to the consumer likely to purchase this product.

Click Here For Most Helpful Customer Reviews >>

Being in a household of five adult coffee drinkers, I brought this product so that we didn't have to make a new pot of coffee every hour or so. It was a little awkard, but I was quite thrilled to make 24 cups of coffee. After a couple of weeks, the paint started peeling off on the inside rim and after just owning it one month, the knob to dispense the coffee broke off. This product was not mishandled my anyone in my household, we followed the directions exactly as written. Also, the product was shipped in its own packaging, not packed in a separate box, so it was quite beat up, and one foot was missing when it arrived. I overlooked this, I am not a picky person as long as it worked. The paint chipping off was a concern where we drinking that? Overall, I WOULD NOT RECOMMEND THIS PRODUCT.

Best Deals on Koolatron TCXU-24 Total Chef Automatic Coffee and Wine Urn 24-Cup

I have been wanting one of these ever since I first saw it. I like the 24-cup capacity. Now that I have one -I HATE it!!! The main problem I have is that we have to strain every cup of coffee that we get out of it or we drink grounds. I have tried using a paper filter inside the filter basket, but that doesn't help either. I have tried everything I can think of to keep the grounds out -or at least to a minimum -so far, nothing I have tried has worked.

Honest reviews on Koolatron TCXU-24 Total Chef Automatic Coffee and Wine Urn 24-Cup

Unfortunately, upon opening the Koolatron we received, we found some coffee grounds already in it, which should have been a clue. Decided to try it anyway, but found that it was totally non-functioning. Returning to the seller was not too difficult, and they refunded our entire purchase price.

Needless to say, we were disappointed, as it was a nice-looking product and would've fit the bill for what we needed. You may purchase and be very happy.

Find helpful customer reviews and review ratings for Koolatron TCXU-24 Total Chef Automatic Coffee and Wine Urn 24-Cup

This one is a little challenging to clean as it is sort of top heavy. Looks great as a serving piece and seems to brew coffee.

Buy Fom Amazon Now

Wednesday, July 16, 2014

Cheap Comfort Zone CZ-DS93 Portable Stove

Comfort Zone CZ-DS93 Portable Stove
Customer Ratings: 4 stars
List Price: $39.99
Sale Price: $33.65
Today's Bonus: 16% Off
Buy Now

Everything I expected, The stove works very well and it is well constructed. I received it timely with no damage. Love it!

Click Here For Most Helpful Customer Reviews >>

I bought this for my daughter and her husband to use while they remodeled their house. It works great. I arrived on time and my daughter loves it!

Best Deals on Comfort Zone CZ-DS93 Portable Stove

returned for exchange. one of the burners was not working . had to return it though my wife really neede it at that time

Honest reviews on Comfort Zone CZ-DS93 Portable Stove

My boyfriend and I live in a basement apartment so we don't have a stove. I bought this brand because I bought him a different brand for christmas, after 3 months, the left burner stopped working. We decided to get a new hot plate that was a different brand. When we received this item, I used it the next day, it warms up so fast, the only issue I have is that it doesn't boil water well, other than that I recommend this product.

Buy Fom Amazon Now

Tuesday, June 10, 2014

Discount Fahrenheat/Marley PLF504 Electric Hydronic Baseboard Heater

Fahrenheat/Marley PLF504 Electric Hydronic Baseboard Heater
Customer Ratings: 4 stars
List Price: $144.99
Sale Price: $120.21
Today's Bonus: 17% Off
Buy Now

I was getting some pretty high monthly bills using the standard baseboard heaters with the typical resistant type heating elements. They appeared to be cheaply made, as well.

So, I surveyed my home. Getting the number and correct lengths for the Hydronic baseboard heaters. I had to find other suppliers because Amazon's vendors didn't have all sizes needed.

I used two(2) other suppliers. I have a two(2) floor, two(2)bedroom one(1) bathroom; kitchen/dining room and a finished upstairs den/activity room Cape Cod type house.

This required two(2)\six(6) foot hydronic heaters upstairs; one(1)\two(2) footer by the back kitchen door downstairs with one(1)\five(5)foot hydronic heater against the kitchen's interior wall; one(1)\six(6) footer under the front living-room double window and one(1)\four(4) foot heater under an adjacent window, also, in the living-room; one(1)\two(2) foot hydronic in our full bathroom, which would be considered smaller than the average bathroom by today's standards. One(1)\five(5)foot heater placed under the window in the back bedroom; two(2)\four(4) foot hydronic baseboards were attached under the two(2) adjacent windows in the master-bedroom.

HYDRONIC HEATER TOTALS:(These heaters are all the 240VAC models, using separate wall mounted thermostats.)

LENGTH # of UNITS

6 FT ....... 3

5 FT ....... 1

4 FT ....... 3

2 FT ....... 2

Hydronic ------

Units Total: 9

During the winter months, my electric bills would average over $200.00 apprx.

After installation and a few months use over winter months, the electric bills averaged a little over $100.00.

This was significant enough to bring a smile to my face.

Understand that this reflects only performance within the environment of my home. Different results may vary with other installations.

I would assume, that if the customer is replacing the resistance coil type heaters with the liquid filled hermetically sealed heating elements as seen in these hydronic units, a reduction in electrical power use should result.

I have no doubt, in my opinion, that these hydronic type heating units earn a five star rating.

Click Here For Most Helpful Customer Reviews >>

We bought this unit more than 5 years ago (cannot remember how long before then) when larger selection of hydronic heaters were available. This unit continues to work, turning our 3/4-season sunroom into a comfortable year-around room. It is very safe, there are no loose parts, the liquid supporting the heating method has not leaked, dripped, etc. Entire unit is solidly built and puts out so much heat that my husband can sweat if he stays in the room too long. A small change in thermostat equates to a large heat output. With 3 dogs running around, this unit has tipped over a few times. Each time, the security feature turned off the unit stopping any potential harm. We are VERY satisfied. For someone who has children playing on the floor, I recommend hieghtened attention or prohibiting the children from playing on the floor in front of the unit unless an adult is with them, because the unit produces a lot of heat in a short period of time, and many children do not recognize or report to an adult the major they feel in temperature. I would be concerned about too much high heat focused onto the child in a focused and short timeframe. The only downside is that you cannot adjust the unit to redirect the airflow, yet this seems to be common with other baseboard heaters I have seen.

Best Deals on Fahrenheat/Marley PLF504 Electric Hydronic Baseboard Heater

A great product make sure you get a thermostat with it. it never said you needed a thermostat. you do

Honest reviews on Fahrenheat/Marley PLF504 Electric Hydronic Baseboard Heater

At my contractor's suggeestion, we replaced an old electric baseboard heater with this hydronic one when remodeling our bathroom. As he suggested, this new heater is more efficient, heats up faster and stays warm longer after shutting off than the old one. The "white" is creamier than I'd expected, but the design is so low profile that you hardly notice it. We're thinking of switching all of our electric baseboard heaters to the hydronics.

Find helpful customer reviews and review ratings for Fahrenheat/Marley PLF504 Electric Hydronic Baseboard Heater

Please provide concise information length,width,height,required wiring to complete installation,precise description of accesories required,so customer does no need to guess or go digging reviews for information.Like you are the customer getting info about the product. Regards, Alex

Buy Fom Amazon Now

Friday, May 30, 2014

Review of DuraHeat DFA170C 170,000-BTU Kerosene Portable Forced-Air Heater

DuraHeat DFA170C 170,000-BTU Kerosene Portable Forced-Air Heater with Thermostat
Customer Ratings: 5 stars
List Price: $429.00
Sale Price: $363.89
Today's Bonus: 15% Off
Buy Now

My husband has a 2400 sq foot auto shop and this heats the place up quick. he has had an old old model and needed to upgrade, i searched all over and this was the best bang for the buck. we use it all the time in the texas winters.

Click Here For Most Helpful Customer Reviews >>

Wednesday, April 23, 2014

Review of Breville BKE820XL Variable-Temperature 1.8-Liter Kettle

Breville BKE820XL Variable-Temperature 1.8-Liter Kettle
Customer Ratings: 4 stars
List Price: $199.99
Sale Price: $127.29
Today's Bonus: 36% Off
Buy Now

I am relatively new to the tea scene (my wife and I started drinking Teavana teas about a year ago) and as such I have been searching for a really good kettle. I wanted an electric kettle because of their ease of use as well as the extra features some of the nicer kettles offer. After an exhaustive search I decided upon the Breville SK500XL Ikon Stainless-Steel Electric Kettle based in no small part to the excellent reviews it has received on Amazon and other sites.

I went to a few stores to examine it in person and compare it to about ten other electric kettles that the different stores carried but nothing seemed to come close to the design and quality of the Breville. So after finally making my decision, it was simply a matter of time before I made my purchase. I am very glad I waited as within 2 weeks this new Breville kettle was released. While still substantially costlier than the SK500XL, the BKE820XL has a number of features and design improvements that made the extra cost more than worth it. These include:

Multiple temperature settings (different teas require different temperature water for an optimally brew) with 20 minute hold

Improved water level indicators now on both sides (the single water level indicator on the SK500XL is behind the handle which makes it hard to read)

I've only had my BKE820XL a few days (I purchased it from a local store) so I cannot speak to its long term reliability yet, if it is anything like the SK500XL, I don't expect to have any problems.

Oh yeah, and the tea I've made in the last few days is easily the best I've ever brewed! Yay!

UPDATE 1/2/2009: I've had the BKE820XL for over a month now and I still love it! The only thing I've found that I would critique is:

After you are done boiling water for the day, you need to either dry out the lid by hand or leave the lid open for a few hours to let the water evaporate (from the lid where it collects). I am concerned that not doing this might lead to issues down the road.

Even with that, I am still overjoyed with my purchase (which I use at least 5 times a week) and highly recommend it to anyone in search of a quality electric kettle.

UPDATE 3/12/2009 Nothing much to report except that my wife and I are continuing to use our kettle mutliple times a week and are extremely happy with it. It has a permanent place on our counter! :)

UPDATE 09/26/2010 Just wanted to pop on and provide a quick update. We have had this kettle almost 2 years now and have yet to have any issues with it (fingers crossed). We have used it at least once a week (if not a lot more) pretty much without fail and are still very happy with it. At this point if something were to go wrong with it, we wouldn't hesitate to purchase another one. Highly recommended. :)

UPDATE 09/30/2010 A commenter chastised me a bit for not mentioning the BPA controversy in my review. As I mentioned in my reply to her, I would caution everyone to be sure to read the actual scientific papers or publications that are as unbiased as possible. I find a great source for all things scientific to be Arstechnica.com. They have a great way of breaking down complex topics in ways that non-scientific types (like myself) can really understand and absorb (see this BPA article as an example: ).

If you don't want to wait for a conclusive link between BPA and health issues (of which there has not been one to date that I am aware of), I can completely understand and sympathize. If I had an infant I would definitely be doing all I could to minimize their BPA intake. Still, with that said I would ask that anyone concerned by this or other health issues please try to represent the facts in your arguments and not the hype; this allows others to make their own, informed decisions as well.

UPDATE 09/04/2011 We've had our Breville almost three years now and have yet to have any problems with it. Most of the negative reviews seem to be in regard to the potential BPA issue which I've already posted my opinion on (both above & in the comments to this review) however a few have mentioned actual mechanical issues. Perhaps they use theirs more than we do (we use ours at most once per day but probably more realistically about 3 to 4 times a week on average) or maybe they just received a lemon (or perhaps ours is the exception, I couldn't really tell you). I have noticed recently that the lid sometimes stays shut while the water is still hot; I don't know if it has always done this and I never noticed before or if it has recently started to do this, either way I look at it as a design element (to help keep me from spilling hot water on myself) but perhaps it is a design flaw? Regardless all I do is tap on the lid once or twice while pushing the button and it opens right up. Other than that it works just as well as the day we bought it (I still don't have a decent thermometer so I couldn't tell you how accurate it was new or used but the water still seems as hot...for whatever that is worth).

UPDATE 04/09/2012 Well I am sad to report that, after almost 4 years of service, our Breville appears to be on its last legs. Over the last few months we've started to notice some faulty behavior that I suspect is indicative of our unit's impending death. Here are the issues that have started to plague our kettle:

Kettle does not shut off at the proper temperature: this is happening more and more we mostly use our kettle for coffee these days and I use the second highest setting (195 degrees) for our Chemex. The issue is the kettle doesn't always shut off at 195 degrees but will go to a full boil instead. I do not know if it would eventually shut itself off or if this is a true safety issue as I've always notice the issue right away. This is not a huge issue (provided the safety shutoff is still working, which is unknown) as much as an inconvience but it does not bode well for the kettle's future.

For the first time this morning, the Breville shutoff prematurely. I turned the kettle on, set my temperature and the temperature hold and walked away. When I returned (less than 5 minutes later), the kettle had shut off and the water was nowhere close to the 195 degree that it was set to. I was unable to get the kettle to heat up the water to the 195 degree setting as it would (by the sound of it) start to heat up but then before the water was hot enough, it would shut off. The water never got to the correct temperature and the kettle never shut off. It seemed stuck in a repeating cycle. I eventually set the kettle to its highest setting (205 degrees) and the kettle started working again.

To me these issues seem to indicate that the kettle is having issues with its electronics and not with the actual heating unit itself (but obviously this is purely speculation on my part based on my anecdotal evidence). Being that this is the only "high end" kettle we've owned, I don't know if 3+ years is a normal or acceptable lifespan for a tool such as this. I know it only comes with a 1 year warranty but for the price, I had hoped it would last at least 5 to 10 years but perhaps that is unrealistic? Being that my wife and I are mostly coffee drinkers these days, we probably will replace this kettle with gooseneck spout type kettle (like this Bonavita: Bonavita 1.0L Electric Kettle BV3825B) instead of another Breville. Overall I'm still a fan of our kettle and will be sad to see it go.

I believe my original score of 5 stars still stands though I'd change it to a 4.5 if Amazon allowed 1/2 stars.

Click Here For Most Helpful Customer Reviews >>

First, this kettle is gorgeous! I bought it for it's beauty and easy to use variable temperature and the fact it had a viewing window to easily see how much water was inside. Before I used it, I emailed Breville to find out what type of plastic the viewing window was made from. The response I received was a defensive email about how polycarbonate and BPA are safe for food contact and this kettle is safe. I've been reading the research on BPA and polycarbonate for years, so they didn't share anything new with me. I would have preferred their response to simply state "polycarbonate" and then offer to provide me with more information if I had any concerns.

Regardless, they weren't going to change my mind. I don't feel comfortable with polycarbonate around my boiling (or close to boiling) water and in this day and age where BPA is a huge uproar, I am super surprised that Breville came out with a brand new kettle containing polycarbonate. I would have loved to see this kettle have a glass viewing window and lid, that would have been super! Especially with the price point they are selling this at. Having it be a "toxin free" kettle with no plastic would have been a great marketing move.

I did reply and thank them for the information and politely told them I would be returning it due to the polycarbonate, but that if they came out with a version that had glass instead of polycarbonate, I'd snap it up in a second. I received no further reply from Breville.

Best Deals on Breville BKE820XL Variable-Temperature 1.8-Liter Kettle

I drink various types of teas constantly to my dentist's consternation, such as Irish and East Frisian in the morning with Pu Erh Tuo Cha and Green Jasmine in the evening. On the weekends I drink French Pressed coffee.

I did it the old fashioned way with a thermometer. Needless to say, but I will anyway, this kettle did make life simpler, but, (always a but) it has not functioned as advertised.

The primary issue is on the boiling setting for black teas. Sometimes it shuts off, and sometimes it doesn't. The other presets have worked flawlessly, and this may only be an anomaly with this particular pot.

I will say that I am going to order a second one, and send this one back to Breville for repairs. That should tell you how much I like the idea of this kettle.

Honest reviews on Breville BKE820XL Variable-Temperature 1.8-Liter Kettle

Despite the 1-star review, which I will get to in a moment, this Breville kettle gets 5 stars for performance and aesthetics, both of which are addressed in detail by others in their reviews, so I will not repeat. It gets 4 stars for durability I have had the kettle for about 2 years and it still works great, however less than a year in, the inside bottom developed several dozen small white spots. I have tried more than once to remove these with baking soda but they persist (I never boil anything other than Brita-filtered water).

Now, why the 1 star? As some others have commented, Breville kettle uses plastic material for the water-level windows on both sides of the kettle not BPA free. Even plastics that have no BPA still leach chemicals into water at boiling temperatures, so the use of plastic instead of glass in a kettle is truly not acceptable any more.

Here are some numbers, to support this potentially serious issue. I recently purchased ZeroWater Water Tester ZeroWater ZT-2 Electronic Water Tester, which measures the amount of dissolved particles in water (with very consistent and accurate results; highly recommended, may change your water drinking habits). We are fortunate to have relatively clean municipal water, its reading came in at 47 TDS (typical range in the U.S. is 51-200), which Brita pitcher gets down to 35 TDS. After boiling Brita-filtered water in this Breville kettle, the TDS reading went UP from 35 to 90 TDS! The same Brita-filtered water boiled on the stove in a non-stick pot went up from 35 to 43 (after boiling for 3 minutes). In a steel pot, the particles' reading went up from 35 to 47. The particles concentration goes up, in large part, due to evaporation of some of the water by steam, thus leaving a higher concentration of heavier (non-evaporating) particles in the pot.

I repeated the test a few days later. The absolute readings were +/3 from the above results, but the conclusion was still very much the same using Breville kettle to boil water adds chemical particles to your drinking water. You have to decide for yourself are the satisfying performance and stylish looks of this kettle worth adding significant unnecessary and potentially harmful plastic particles into your body.

UPDATE 11/15/12:

After about a year, 2 performance issues developed:

1. The auto-shutoff stopped working it actually got delayed, rather than completely not functioning the water would boil and boil, for 5-10 minutes, before the kettle would finally shut itself off.

2. Kettle started leaking at the bottom of the handle. Not a few drops type of leaking, but a little stream.

I'm looking for a replacement now.

Find helpful customer reviews and review ratings for Breville BKE820XL Variable-Temperature 1.8-Liter Kettle

I got this kettle to brew the perfect cup of coffee and I loved it for the first 6 months. Then things started going south. The kettle intermittently does not shutoff when it reaches the proper temp of 200F. Instead it continues to heat to a boil and will boil itself dry unless turned off. Now the audible alarm has stopped working. I can't trust the thermostat and the kettle shouldn't be left unattended the 2 main reasons for purchasing it!

I feel that for what this kettle costs it should have lasted a lot longer. If I had written this review when I first got this kettle I would have given it 5 stars, but experiencing such failure in so short a period of time I can only give it 1 star. I wonder how many of the 5 star reviews were posted right out of the box.

I really got spoiled when this kettle as working properly. I'm on a quest now to find a reliable replacement.

Buy Fom Amazon Now