Buy Cadet Manufacturing 67507 240-Volt White Com Pak Fan Forced

Customer Ratings:
List Price: $161.99
Sale Price: $104.30
Today's Bonus: 36% Off

I manage several buildings that feature these, They are very common in apartments and they work very well. Lots of heat, pretty low noise, and they take up very little wall space; just don't place furniture too close to them and vacuum the grill out once a year. These are often run by a wall thermostat; over-riding the built-in one.

Click Here For Most Helpful Customer Reviews >>

I ordered this as a replacment for a failed unit. It was an exact match and installed easily in place of the old one within minutes. The prior unit failed after we had the house for four years. And I believe the original unit was installed a few years before we bought the house. So it lasted 4+? years.

Best Deals on Cadet Manufacturing 67507 240-Volt White Com Pak Fan Forced

Cadet #67507 2000W Wall Fan Heater Plenty of heat, wish the forced air fan was bigger. If I were to buy one again I think I would have gone with the next size bigger from Cadet. I have one in my family room and love it, this one just doesn't blow the hot air. I worry about it over-heating.

Honest reviews on Cadet Manufacturing 67507 240-Volt White Com Pak Fan Forced

NEVER order from this company Kathy & Dennys THREE TIMES I gave them the right address THREE TIMES they mailed it to the wrong one. NOT even the right state. As far as heater goes who knows never got it...

Find helpful customer reviews and review ratings for Cadet Manufacturing 67507 240-Volt White Com Pak Fan Forced

I have Cadet wall heaters in my apartment. One of these 2000 watt units in the living room, two 1000 watt units in the 2 bedrooms.

As far as I can tell, the thermostats are useless. Just as an example:

I have one of the 1000 watt units turned on in my bedroom right now. The room is 68-69 degrees. If you turn the thermostat all the way down to shut the heater off, and then turn it up until the heater turns on, it turns on at about 62 degrees. If you then turn it down until the heater goes off, it turns off at about 54 degrees.

That's an 8 degree swing. And the setpoints are WAY off from the actual temperature in the room.

I don't understand why I don't see a lot of complaints on the internet about this kind of heater. I don't think it's just Cadet, I think it's the particular type of thermostat, no matter who the manufacturer. I believe these are what are called "bimetallic" thermostats. As far as I can tell they are utterly useless. All they are good for is as an on off switch.

At least that is my opinion based on my own experience. If I'm missing something, someone please point it out to me.

Has anyone ever been actually able to control the temperature within a reasonable range with these? If so please speak up and explain how you were able to do so.

PROCOM Blue Flame Wall Heater - 10,000 BTU Output, 300 Sq. Ft Review

Customer Ratings:
List Price: $139.99
Sale Price: $119.99
Today's Bonus: 14% Off

I purchased this item on Nov. 2, 2011, (received it on Nov. 9, 2011), replacing an existing heater that had gone out. It was easy to hook up to the existing line that was already installed in the room from the old heater. I have NO complaints about the heater, I love it, it does everything it say and then some. It has a glass plate along with a screen in the front of it, which at first when I read that it's a 'cool touch' heater, I was very sceptically about that, but honestly it is very cool to the touch, even in the front! The only place the heat comes out is at the top and us having dogs in the house, makes this very comforting to me, as our old one was a 'brick' burner heater and it did leave the front open to being able to get to the flame and the bricks and possibly getting burnt or worse. In an approximate 15x15 area room, we can comfortable set it around 1-2 on the dial and stay very toasty with it. It's a dual gas heater, meaning you have have either natural gas or propane to hook it to, we have the propane, which there was nothing to do but hook it to the right line hole, (which are very clearly marked) and didn't have to worry about setting any other settings with it, it also has an electronic push button ignition, which does not even take batteries to work it and comes with a bunch of safety features as well. I plan on getting a larger one to replace the old brick burner we now have in our living room, but first I would like to let you know about the seller we purchased it from through Amazon, Northern Tools & Equipment, it states both here on Amazon and Northern's website that it comes with a blower,(but can't be used with this model), IT DOES NOT! I have went through countless emails back and forth about this between Amazon and Northern Tools, they, (Northern Tools & Equipment) just keep telling me that they will refund the money if I send it back to them and AFTER it passes THEIR inspection, which anyone will tell you that it won't after being hooked up! So, when I order my next ProCom heater I WILL NOT order it through Northern Tools & Equipment! I will make doubly sure that it comes from another seller and not Northern Tools! They will not stand by what they sell as far as what is suppose to come with it. I have no problems with Amazon, I have purchased many, many items over many years through them and will continue to make purchases through Amazon, they are a great company to buy from, they strongly stand behind what they sell and they have done everything in their power to correct this problem, but Northern Tools & Equipment refuses to co-operate, except as I stated earlier to return the product and refund my money after it passes inspection. So, if you want a very good heater that is easy to hook up and does what it says it will do, then I highly suggest the ProCom heater and it does come with a one year warranty included. ProCom Blue Flame Wall Heater 10,000 BTU Output, 300 Sq. Ft. Heating Capacity, Model# MD100TBA

Click Here For Most Helpful Customer Reviews >>

I purchased this unit to replace a ProCom 10,000 btu unit I had gotten in Quartzsite, Arizona 7 years ago. That unit worked fine until last winter when it wouldn't stay lit. I thought this was the same unit until I received it & it said on the box "not for use in an rv" It also said that it would not work above 4,500 ft. None of this was mentioned on the web site. I returned it having to pay postage both ways.

Best Deals on PROCOM Blue Flame Wall Heater - 10,000 BTU Output, 300 Sq. Ft

The thermostat works perfect. Just the right size for the rv. Set it up with a fast connect hose under the fridge.

Honest reviews on PROCOM Blue Flame Wall Heater - 10,000 BTU Output, 300 Sq. Ft

I purchased mine on sale at Northern Tool while visiting my in-laws during Christmas of 2009. I grew up in the family plumbing business so was able to install the gas line myself, but those without experience will need professional installation. If you are replacing an existing appliance it is a non-issue. Otherwise, gas pipe and installation will cost more than the unit itself.

We live in Appalachia where power can go out for days and intended it to provide backup heat for one room. Once installed, however, the warm glow of the blue flame was irresistible and it has been on every winter since. We set its thermostat slightly lower than that of our inefficient central heat which now kicks on just often enough to disperse the heat and provide ventilation. This appliance has paid for itself in savings on our gas bill! It is supposed to only heat 300 Sq. Ft., but 700 Sq. Ft. is comfortable with a sweater when power is out and outside temperatures are below freezing.

We used to run our generator constantly when power was out just for the furnace fan, but since we bought this we can rely on a $100 inverter to cool our freezer an hour in the morning and evening and watch TV a few hours a night. Instead of standing in the freezing cold every 6 hours to refill the generator, we could fill up our Jeep once every two weeks. We live near the well heads, but if natural gas would be interrupted it will run about 3 days on a 20# propane grill tank (left outside).

Find helpful customer reviews and review ratings for PROCOM Blue Flame Wall Heater - 10,000 BTU Output, 300 Sq. Ft

An Excellent, well-built little heater (I now own two of this model).

The mandatory things I needed included:

1. A room sensitive/automatic thermostat (NOT the low-med-high manual type)

2. The size needed to be around 10,000 BTU's

3. That it was made by a trusted company

4. Priced low enough to fit my retirement budget

This unit fit the bill perfectly. I have used a much larger PROCOM heater as my primary living space heater for many years and, as long as I clean out the pilot every year (shut off for the summer), it runs perfectly.

The good:

The unit was well packed and the Installation instructions were accurate.

Everything needed to install the heater(including wall mounting anchors/screws and an allen wrench to UN-cork the gas port) was included.

The unit has a glass cover plate that extends across much of the front burn area (behind the metal grill) which serves as an added flame safety device, dust shield and draft blocker (to keep the pilot from being blown out) which is really an excellent idea. Access to this area to service the pilot is via four screws, two at the top and two at the bottom of the front grill.

-The igniter spark is strong and consistent. Once air was out of the gas pipe the pilot lit quickly and stays on.

The bad:

Nothing to speak of.

Notes:

As a dual use type (can be set to either Natural gas or Propane) it has two internal regulators and independent pilot systems. You should note that the pilot on the right is for the propane. It burns cleanly and fully covers the thermocouple which glows red as it should.

The gas pipe inlet ports are located on the bottom left as you face the heater. I ran my 1/2" black pipe to the left of the heater which allowed for a gentle "s" type curve of the flex pipe. I also purchased the Mr. Heater F271239 One-Stop Universal Gas-Appliance Hook-Up Kit which has everything you will need (except a gas pressure tap which is optional as long as you know your line pressure is in spec.)

The temperature sensing bulb is on the back of the heater very close to the bottom edge. Being on the back, you should be aware of the temperature of the wall you are mounting the heater to. I needed to mount one of my units on a cement wall which constantly radiates cool air during the winter. To minimize excessive and false thermostat turn-on, I insulated the wall behind the heater with 1" hard board insulation then used 2x4 pieces to stand the heater off the wall. So far, so good.

Summary:

The unit burns cleanly with a perfect blue flame and It puts out a good amount of heat for the modest size of the flame area. I liked the heater so much that I purchased a second one and will now be able to run the entire winter with the oil burner off.

Good luck and stay warm!

Dimplex #ETS610A1 Electronic Line Voltage Thermostat Single Pole Review

Customer Ratings:
List Price: $34.00
Sale Price: $14.00
Today's Bonus: 59% Off

This is a great thermostat. I live in Michigan, and I have a, well insulated, home office built into one side of my garage. I have used a cheap ceramic electric heater (with a fan and built in thermostat)for 14 years. Until I got this thermostat, the temperature had always varied widely. Most of the time I had to wear a sweater to work in the winter. From January of this year until summer, the Dimplex thermostat kept the temperature constant, with the same heater.

The heater is in front of my desk on the floor, and I mounted the thermostat about 6 feet up, on the wall next to my desk. I have a digital clock, with a thermometer on the opposite wall. Every time I looked at it, from January until I put the heater away for the summer, the temperature was 73 degrees or rarely 72.

The wiring was a little trouble, because the thermostat is on the opposite wall from the out;et for the heater, but it was definitely worth it.

I would recommend this to anyone.

Click Here For Most Helpful Customer Reviews >>

Professional Belgian Waffle/Omelet Maker WOM600BKSA Reviews

Customer Ratings:
List Price: $119.99
Sale Price: $116.99
Today's Bonus: 3% Off

This cooks pancakes and waffles really beautifully. I do not flip it when it beeps but give it a little more time. I think this was a really good purchase.

Click Here For Most Helpful Customer Reviews >>

Makes the perfect omelets and waffles! I use it as well to fry my sunny side up eggs and they come out perfect!!!

Best Deals on Professional Belgian Waffle/Omelet Maker WOM600BKSA

This makes great waffles and the omelets on a scale of one to ten I give it a eight Clean up is a breeze and easy to store just wished it had a drip pan for over flow but that's not enough to not give this item 5 stars I would buy again If your looking at it don't hesitate purchase it

Honest reviews on Professional Belgian Waffle/Omelet Maker WOM600BKSA

This was purchased as a gift. Delivery time and product were as expected, and the recipient was delighted. Early tests show it to function as advertised.

Cheap GE 45601 Z-Wave® LED Handheld Remote

Customer Ratings:
List Price: $59.95
Sale Price: $42.57
Today's Bonus: 29% Off

First, the display is not backlit (-1 star), nor are any of the buttons. Forget working this device in the dark. Second, the remote has a quirk that may make you think that the remote (or a device) is not working! It's not really broke, though, so hold off on returning it ...

Here it is how I 'fixed' my remote:

If the remote does not recognize a module, "removing" the module on the remote WILL NOT WORK. You need to "DELETE" the module. "Delete" and "Remove" are NOT the same. "Reset" will NOT work. I was about to return the remote and the module that I bought, totally convinced that one or the other was broke! Follow the directions for "deleting" a device, and then try adding the device again.

A second tip holding down the button on a module/device will NOT do anything positive. Press it once, and release it immediately. Do not think that "maybe a really good press will help".

Now that I have "fixed" my remote, I like the product. The remote can be used to set up timed events like turning lights on or off automagically at specific days and times. The remote and z-wave network are really very sophisticated. Each module can function as a repeater to extend the range of the network. A Z-wave network is a real timesaver, but it is not for idiots. I almost did not make the cut for "smart enough", and I'm plenty bright. Good luck for the average Joe who'se VCR still blinks "12:00"!

I will eventually buy at least two more lighting controls. I am looking forward to installing Z-wave power strips and controls throughout my apartment.

EDIT 10/28/2010:

If you program "events", the range for timed events is different than the range for the buttons (my experience). The buttons have a really good range. I can use the remote buttons to turn lights on or off from the sidewalk. Timed events only seem to work reliably when I leave the remote within two feet of a module. This could be due to interference, but I do not know.

Click Here For Most Helpful Customer Reviews >>

I first bought an Intermatic HA09C remote but after being unimpressed I got this GE 45601. The GE remote is WELL worth the extra $18 and is currently now the primary z-wave controller in my house.

Pros:

1) Can individually control 18 devices with a shift key and 9 rocker switches

2) Can control 9 timed events (on + off are 1 event), which means it has an internal clock/calender, timed events can be enabled/disabled, events can trigger groups/scenes/individual devices

3) Can create groups and scenes, which I don't believe have to be the same as the 18 direct rocker controlled devices (you can add devices not assigned directly to a rocker)

4) Has a small text lcd to help in programming and labels (programmable) for devices.

5) Can set custom device options, like dim ramp rate (you need to know the technical details of the option, like set device option 1 to a value of 2)

6) Controls thermostats

7) Instructions are WAY better than Intermatic HA09C manual

Cons:

1) lcd is not backlit

2) No details when error occurs, for example I tried to program a scene for a non-scene capable device and it just would say "fail"

3) Can't query state of device and display on lcd

Best Deals on GE 45601 Z-Wave® LED Handheld Remote

I still don't know if I can get this to sync with my TZ45 Z Wave thermostat since it is already synced to my iHub and I'd have to unpair it in order to attempt that, but it works with lights and it is super cheap! I spent hours trying to figure out how to get this to work with my ADT Pulse Z-Wave system. The instructions don't explain that. It explains how to add lights and devices, but not how to sync it with existing hubs. Here are the steps.

1) Place the iHub and the remote near each other.

2) At the Web Portal, use the Add Device wizard to add an inclusion controller.

3) On the GE/Jasco Remote, press and hold SETUP until the display reads LGHT SETUP.

4) Use either Arrow key to scroll until the display reads TRANSFER.

5) Press OK and the screen will display PRIMARY.

6) Use either arrow key to scroll until the display reads RECEIVE,

7) Press OK and the Screen will display RECEIVING.

8) When screen displays SUCCESS you have successfully transferred the information from the iHub to the inclusion controller.

Honest reviews on GE 45601 Z-Wave® LED Handheld Remote

This item deserves five stars because it is a fantastic way to control zwave lights around the house. When I installed one to my ADT Pulse network last spring, it was painless: You went into the website's "system", "manage devices" and then chose "install inclusion controller." Once done, I was able to control 18 different light fixtures around my house with the remote and also preset lighting combinations such as which lights we want on at a certain dimmer level while we were watching television. That truly made both the remote and ADT great companion products, as we could control lights intricately with the remote but could also control lights with our alarm system.

Alas, we lost one of the remotes and tried to install a new one this week. After hours of thinking we had a technical problem with the install, we finally realized from ADT that they no longer allow customers to install these remotes as "inclusion controllers" on their system. Thus, when you go to manage devices, and install on the website, inclusion controllers have been eliminated. Add insult to injury, ADT did not even have the courtesy to remove the installation instructions from their online manuals which resulted in many wasted hours of fruitless attempts trying to install. Most staff in the Pulse technical department when I called for help were unaware that the problem was simply the items are no longer supported.

Once you install the ZWave light switches and use the remote you will never want to go back. I am now perplexed what to do because I have had the ADT Pulse system for less than six months and would have definitely considered a competitor's product if I had known the company would take away this level of compatibility.

If you are shopping for an alarm system that makes full use of ZWave technology, you may want to consider brands that compete with ADT and make more sophisticated use of the technology. You can start by doing a web search along the lines of "adt pulse not compatible with inclusion controllers" to find internet postings about this problem and other home security systems in the market place.

For anyone simply using the Zwave technology without the home security system, this GE remote is fantastic.

Find helpful customer reviews and review ratings for GE 45601 Z-Wave® LED Handheld Remote

Despite its basic appearance, the GE 45601 easily controls my Trane thermostat (interactively shows you the current setpoint and mode, and lets you alter them), and it's capable of doing transfers to a secondary controller, such as a PC based Z-wave controller.

Setup was very intuitive. I didn't need to look at the instructions.

The only negative is that it's not backlit. Fortunately, it's pretty easy to turn the lights on if I need to read the display. :)

Best Camco 07733 Apcom Extended Shank Lower Water Heater Thermostat Deals

Customer Ratings:

My water heater (82gal) has an externally adjustable lower temperature setting. The extended shaft on the above listed thermostat allows the adjustment dial to be connected to the thermostat and the cover to be installed. I then measure my hot water temp. with my wife's digital electronic temp probe to get the setting around 125 degrees F.

It is a perfect replacement for the original thermostat.

Click Here For Most Helpful Customer Reviews >>

Buy 1.25qt Stainless Steel Deep Fryer with Basket

Customer Ratings:
List Price: $69.99
Sale Price: $29.99
Today's Bonus: 57% Off

Piece of junk. have had 5-6 fryers over the last 40+ years of cooking. Untill now never had one without a hinged lid or hinged handle to raise and lower the basket. Very dificult to store because of the handle, after the third use I found the perfect storage place "the dumpster". will order a name brand soon.

Click Here For Most Helpful Customer Reviews >>

I bought this from another department store on Black Friday 2010, and it was great while it lasted. It was the right size for a single person, and I liked the basket and different temperature options. It would fry a basket of fries nice and crispy. However, here it is March, and I was prepared to fry up some fries today. It would not turn on. I unplugged it and plugged it back up. It still didn't do anything. The grease never got hot, and the little light on the side never came on. Fortunately, I got a great price back on Black Friday. So, no big deal. I got my money's worth. Still, I would not shell out any big money on this brand. From reading the other reviews, this product is not made to last very long.

Best Deals on 1.25qt Stainless Steel Deep Fryer with Basket

This deep fryer is perfect for what I intended. It's a little smaller than I expected, but perfect for side dishes for my husband and myself. Love love love it!

Honest reviews on 1.25qt Stainless Steel Deep Fryer with Basket

this is very small capacity good for two people at bestHomeimage USA 206 1-1/4-Quart Stainless Steel Deep Fryer with Basket, limited time offer

Best 36" 110V Builders Box Traditional 36EB110-GRT Deals

Customer Ratings:
List Price: $979.99
Sale Price: $783.99
Today's Bonus: 20% Off

Nothing smells or looks like a real fire. However, the looks of this one comes close. We are enjoying it. Installed it in the summer and have been using the fireplace. Love the adjustable features. Just started using the heater and so far so good.

Click Here For Most Helpful Customer Reviews >>

I purchased this as a gift for my wife and went through the instructions step by step in setting it up in an existing fireplace only to find that while it looks great it does not however produce hardly any heat at all. Unless you're standing, not sitting like you would a real fire place, but standing literally directly in front of it and over it you will not feel any heat. I contact the seller and was basically told that, "it was what it was", and I'd have to deal with it. Highly aggravated now since I already went through the not so simple task of trimming it out in order to fit the existing opening, as well as running wires up to the attic and then down behind the wall through to properly mount the thermostat control I now had to undo all I had accomplished in order to package it back up and send it back due to no cooperation or help of any kind from the seller. Amazon however was and usually are easy to deal with on returns. I would NOT recommend this product if you are expecting it to maintain some warmth in a room any bigger than a small bedroom or large closet. But again, we were impressed with it's all around look. So just don't purchase on any grounds to based on using it as a heater.

Best Deals on 36" 110V Builders Box Traditional 36EB110-GRT

just love this fireplace! It is beautiful and we installed it in our entertainment center we built so now we can snuggle up in front of a fire and watch romantic movies ;)

Best Pro1 IAQ Model T955WH Touchscreen Wireless Thermostat Kit Deals

Customer Ratings:
List Price: $291.06
Sale Price: $207.90
Today's Bonus: 29% Off

this wireless programmable thermostat allowed me to easily and cheaply move my existing thermostat from a dining room we never use to our bedroom. we have two furnaces, and when we saw how well the first one worked, bought another to control the 2nd furnace. that one had been controlled from a wired furnace on the 2nd floor hallway... near the kids rooms. well, now that the kids are all grown, we want the temp in the family room to be the 'set temp' and this unit allowed us to make the move of the thermostat to the family room. easy to set up, and works flawlessly. i had one i nstall question when i was putting it in, and the customer support people were easy to reach.

Click Here For Most Helpful Customer Reviews >>

I have 10 of these( the T955W model without the humidity feature) and the maximum distance between base station and thermostat is NOT what is advertised! They claim 50 feet in a house with "normal" construction, I've found that in my house, which is built with 2x4 framing and lath and plaster walls, the distance is 25 feet maximum. In addition, it has been a very time consuming and hit-and-miss procedure to find the best location to locate a base station and wireless thermostat pair. Most wireless devices now have a signal strength meter on them to tell you when you are in the best location to receive a signal, but this device does not. If you buy this kit, be prepared to relocate your base stations and thermostats several times, like I did. The heating contractor that initially installed the base stations put them all in one random location in my basement, conveniently close to the furnace, thus making it easy for them to quickly wire up the control system. But I've had to relocate 5 of them to be within 15 feet of the thermostats on my first and second floors, so that the base stations can actually be in wireless contact with the thermostats. Another difficulty that this false maximum distance created was that if you have the thermostat Technician Setup feature "Freeze Protection" set to "On", when the base station loses contact with the thermostat, the base station calls for heat every hour, even though that zone does not require heat. I solved this problem, which the Pro1iaq people couldn't trouble shoot, by making sure I set "Freeze Protection" to "Off" WHEN THE BASE STATION-THERMOSTAT PAIR WERE IN CONTACT( this is when the blue light on the base station is on).

I've found the other features of this product to be good, but the wireless transmission distance problem outweighs any of the other features for meotherwise I would have gone wired rather than wireless! If you buy this thing, be very aware of where you locate each base station relative to its thermostat!

Discount Refrigerator Defrost Heater for General Electric

Customer Ratings:

I ordered this to relace a burned out element. The replacement is a double element. Should work better and last longer than original. The price was very cheap compared to what other places were asking. Easy to install and if you are not sure how to go about it, there are how-to videos for just about anything.

Click Here For Most Helpful Customer Reviews >>

Installed this to replace a 12-year old burned out single-element heater. It was a perfect fit, but nearly immediately the refrigerator and freezer components emitted a putrid burning smell. Over the next week, I validated the heater still worked by checking for the heater glow everything I heard the compressor click off. After a little more than a week, I could no longer stand food and ice tasting of burned plastic, so I removed the heater and found the plastic ends and part of the inside of one of the coils melted.

Today I noticed the smell is gone (with thanks to 4 well-placed boxes of baking soda), but found ice build-up on the back wall, so I assume the defrost heater is toast. I'm ordering a genuine one to replace this one, since my original GE part lasted 12 years and this one, just a little over 12 days.

Too good to be true.

Best Deals on Refrigerator Defrost Heater for General Electric

Installing it was very easy pretty much everything just snaps together... Through amazon I spent less then $20 all together and I had repair man quote me $180 but at least he told me what problem was and even showed me part I needed hee hee

Honest reviews on Refrigerator Defrost Heater for General Electric

Being familar with this replacement already, I received these heaters quickly & package well. I highly recommend this great replacement.

Find helpful customer reviews and review ratings for Refrigerator Defrost Heater for General Electric

We ordered this Refrigerator Defrost Heater We recieved it fast did not expect it to shipped so fast My husband installed it the same day our G E Refrigerator side by side Freezer is working like a new one now that we odered this wished we had ordered sooner i had to defrost the freezer with a heater till we ordered this now we hope we get many many more years from this 2003 side by side GE refrigerator Freezer!!!!!!!!!!!!!!!!!!!!!!!!

Discount Thermo Scientific ELED PR305225M Precision Mechanical Convection

Customer Ratings:
List Price: $2,090.00
Sale Price: $1,828.35
Today's Bonus: 13% Off

Thermo Scientific says that the 12 month warranty period begins once they hand this product over to Amazon. So if it sits in their warehouse for 8 months before you buy it then you only have 4 months left on the warranty. When you call for service they will try to sell you a maintenance plan after your warranty runs out.

Click Here For Most Helpful Customer Reviews >>