Showing posts with label heat controller. Show all posts
Showing posts with label heat controller. Show all posts

Tuesday, December 2, 2014

Discount EdgeStar 14,000 BTU Dual Hose Portable Air Conditioner & Heater

EdgeStar 14,000 BTU Dual Hose Portable Air Conditioner & Heater
Customer Ratings: 3 stars
Buy Now
This is a general overview of the Edgestar 14000 BTU dual hose air conditioner.

Buying experience: Average

Product was slow to be delivered, approximately two weeks from the time I placed the order until I actually received the item. Buyer's need to keep in mind that this product is not sold by Amazon. It is some external site that sells via amazon. Most buyers will not face any complications but it is important to know that dealing with some little dotcom is very different than dealing with Amazon in terms of service, quality of product, and returns.

Design: Below average

Product itself is extremely bulky in girth and tall in profile. The "portable" tag is rather misleading. Yes, anything is portable but due to the weight and size of this unit, it is not very portable at all. While it looks very slim in the pictures, it has a large rear section where the dual hose is located. The control panel on the unit is also not very touch sensitive and the power button became non-responsive after a few uses.

Product use: Poor to Unacceptable

It is also very unlikely that this product is a 14000 BTU air conditioner. It cannot, I repeat, cannot cool a space larger than 500 sq feet. It has been used in a wide range of temperatures (72-95F) and completely fails to lower the room temperature by more than 5F. I would estimate that it can cool a space that that is at most 200 square feet. Also note that the unit is very prone to condensation and leaks. Puddles form around the unit on high humidity days. Be careful when using on hardwood floors. It is a disaster waiting to happen. Window kit also had a nice big crack around the hose connection area.

Manufacturer/Tech support: Below Average

As mentioned previously, when dealing with an external seller, it can range from annoyance to frustration. First tried the seller for help and as expected was referred to the manufacturer as "this unit should be covered by the warranty". Manufacturer was must have all of one employee working for them. Impossible to get a live person and even then it was the standard read from a script response.

In summary, this is a dismal product with even worse support. It would be best to avoid this brand and seller. I would not recommend this air conditioner even on a sweltering summer afternoon.

Click Here For Most Helpful Customer Reviews >>

I bought this unit as a birthday present for my husband's new workshop. The square footage of his shop is well under what the unit is rated for, but it was worthless in real heat...we live in South Texas. We called Compact Appliance, who sold it to us with a 100% Customer Satisfaction Guarantee and they told us to call the manufacturer. They have ignored all subsequent requests for assistance. Manufacturer said its not designed to work where the ambient temperature is over 90 degrees. REALLY?? Why would you spend that kind of money to air condition an already cool place? I will never buy from Compact Appliance again and I will tell this story to anyone who will listen.

Best Deals on EdgeStar 14,000 BTU Dual Hose Portable Air Conditioner & Heater

I bought one portable air conditioner and heater from Sonic value company for father's day gift.and i got damage item. and i confirm and recorded everything before i ordered this item that it is gonna be a new item and not any kind of damage. and the after i got this kind of item.So, i called them and explained everything.and every time they were giving excuses and not giving good customer service.and they were telling me to send pictures about damage, about label, more clear pictures,box pictures.and i did every time. then after they did n't do anything. So, i asked to my money back and one day the company vice president send me E-mail and say you are wasting my and my staff time and bla bla bla...

So i sent below reply.

First of all I have not received the email you are talking about. You

guys have all my information you guys could have called me. Just like

you guys were calling me when you wanted our business. And this is not

the way to respond to the customers. I am very offended by your

response, ,which was awfully rude. I will never shop with your company

in the future.

Secondly, If you feel like we are wasting your time then I will send

back the item as soon as possible. We will never do business in the

future and I will make sure that other customers are aware of the

service you guys are giving. And may be you should re-think about

being in business if customer issues are waste of time for you. I

feel like I am wasting MY time by going through all this with you, it

should be other way around. I will take this to consumer affairs. I

don't want to deal with the company who does not know the customer

value and respect.

Thirdly, talking about language, Obviously you guys don't speak

language that customers speaks.

So, Please don't buy anything from this company because this company does not know how to deal with customers and how to make customers happy.and if you need more head ache in your life then i will advice you to go with this company.

Honest reviews on EdgeStar 14,000 BTU Dual Hose Portable Air Conditioner & Heater

Don't buy this money pit!!! Big waste of $730 (original purchase plus repair costs!!!)

On the day after the one-year warranty ended, it stopped running. The manufacturer was rude & very difficult to work with and as a "favor" sent the replacement part at no charge. The part that failed had been redesigned because a tendency to fracture under heat stress. I opened up the back and realized that the job was way beyond my own diy skills. I shelled my own $130 for the repairman, who was very hard to find. He kindly informed me the secret is most AC techs are not qualified to work on mini-duct ac's, which is technically what this unit is.

One year later, the electronics have failed, and having moved to New England, there is NO-ONE who does mini-duct AC work. Still need an AC, though, to keep the creepy basement dried out and the mold at bay...

Find helpful customer reviews and review ratings for EdgeStar 14,000 BTU Dual Hose Portable Air Conditioner & Heater

I read all the reviews and this seemed like the perfect heater/ac for my little office. Well it didn't even come close to cooling my office this summer and now that it is winter I was optimistic that it would at least heat my space...no such luck. In hindsight I should have bought a couple of little heaters and a good fan. I would have been $400 ahead and cooler in the summer and warmer in the winter....sigh.

Buy Fom Amazon Now

Friday, November 21, 2014

Thursday, September 25, 2014

Venstar T5800 ColorTouch Touchscreen Programmable Thermostat Review

Venstar T5800 ColorTouch Touchscreen Programmable Thermostat
Customer Ratings: 5 stars
List Price: $277.06
Sale Price: $162.90
Today's Bonus: 41% Off
Buy Now

I am an owner of the T5800 and while I'm not a HVAC contractor I work in a related business. I'm writing this review mainly to refute some of the things stated by the previous reviewer. . . .

The main thing I must say is if you don't know what you are doing hire a professional. I've always said "the devil is in the details" and while it may be a breeze to replace a thermostat (all you need is a small screwdriver) there is always a possibility that some little things may (or may not) get in the way of a successful installation.

This thermostat requires a constant supply of 24 volt power, and you must have a wire called a "common" coming from your system transformer and running to the "C" terminal on the thermostat. This "C" wire along with the "R" wire provide the power and they shouldn't be touched together or jumpered together unless you are interested in sparks, flames, or melted plastic. If you are running a furnace and an air conditioner and you have 4 wires coming to your thermostat (the most common scenario) you will NOT be able to use the T5800 out-of-the-box. This doesn't mean it's game over. There is a product called "Add-A-Wire" that you can purchase very inexpensively that will allow you to duplex 2 functions on 1 wire and then use the free wire you created as your common. You could also run another wire.

For the reviewer to say that you can just jumper things together is akin to saying you can put a paperclip in an electrical outlet and everything would be fine. Specifically, jumpering "R" and "C" together would most certainly fry your transformer. The fact is a thermostat installation might not be a DIY project. If you aren't sure of what you are doing, pay the money to hire a professional, or do a little more research. Don't criticize the product or the manufacturer because of your own ignorance. It sounds like in this case, Venstar bailed this person out. Kudos to them as they really weren't on the hook to do anything (IMO).

So enough review bashing. This is a very cool looking thermostat AND with the addition of the Wifi Key (part number ACC0454) you can access it over the internet from any computer, your iphone, droid, etc., etc. This is very, very convenient if you are going on vacation and you want to return to a heated or cooled home while saving energy during your trip. You can display family pictures as a "screensaver" which makes the thermostat a lot like a digital picture frame. All flashy features aside, the T5800 is a very easy thermostat to program and use. I have owned many thermostats in my day and this is by far my favorite. Luckily for me I had the "Common" wire in place when I started my thermostat replacement project and so I didn't have to worry about the problems the other reviewer had. My only beef with the thermostat setup is the multi-step firmware update I had to do. No big deal, but you have to have an SD card reader on your PC and you have to download some software. Another "devilish detail" which was no big hassle for me, but might have stumped my Grandma.

Also the Add-A-Wire accessory, which can be used to expand a 4-wire configuration and "create" a common wire is part # ACC0410. Even with the Add-A-Wireyou may still need an HVAC professional to help, as the common side of the transformer will need to be identified on the equipment side.

Click Here For Most Helpful Customer Reviews >>

I did a LOT of shopping to replace our 6 year old RobertShaw cheapie that was installed when we did a recent remodel. That one used a pair of batteries to provide the power it needed. In this case, the Venstar requires 24VAC (if I recall) power to be supplied -which we were not wired for at the time. After going into the attic and looking at the wiring I found two unused wires on the cable that ran to the thermostat. I found the other missing wire that supplied the 24VAC from the furnace and connected it to one of the two available wires which allowed the full 24VAC to be available at the thermostat -we checked it with a volt meter.

A few things that set this thermostat apart from the others -accuracy for starters. We frequently found our RobertShaw thermostat to be multiple degrees off. I could sit a calibrated Thermapen thermometer right on top of the thermostat and the old thermostat would be on average about 3 degrees high. Ugg.. We also noticed that with other models of Honeywell models we'd had in the past as well. This one is spot on or at best 1 degree off -usually it's reading the same value that the thermapen reads which is really nice.

Another feature that sets this one apart from the competition is the super easy to read/understand screen and associated content. We had ours up and running easily with the easy to use prompting.

One area you need to check when doing the install -make sure you understand the dip switch settings -there are 3 of them if I recall. Initially we had set the jumpers wrong which caused it to not shut off the heat after it started -so a few times we found it heating to 75 when we told it to stop at 70F. Ugg.. Anyway, reading closer on the meanings of the dip switches indicated that we had set one switch incorrectly. We changed that switch and it's been a champ since with NO issues.

One other interesting thing I found with this thermostat are the short run times. Our old thermostat would frequently cycle on for 5-10 minutes minimum before it would shut off. This one frequently runs for 3-4 minutes max -short runs and then shuts off.

Overall this unit is by far the best thermostat we've ever owned. We did buy the optional WIFI key for it and frequently use the iPhone app to control it which is really nice if you're in bed and don't want to get up to bump the temp or whatever.

Best Deals on Venstar T5800 ColorTouch Touchscreen Programmable Thermostat

I can't believe how much this thermostat does. It's super easy to use, I can put in my own pictures to make a photo slideshow or even just change the background, and I can connect to it through wifi and see the temperatures in the house or outside, and change settings from anywhere with my iPhone. I bought the wifi card (which was surprisingly inexpensive and has NO MONTHLY FEES!!) so I could change the temperature settings on the thermostat remotely, in case I forgot to turn it off or wanted to turn it on, on my way home. But I realized I can even use the iphone like a remote control for the thermostat IN the house, too for example, my phone is on a charger next to me all night so now I can adjust the temperature on my thermostat in the middle of the night without getting out of bed. Nice...

Also I love being able to send a text message that will display on the thermostat.

PS I had this product professionally installed by an HVAC contractor, very happy with the results.

Honest reviews on Venstar T5800 ColorTouch Touchscreen Programmable Thermostat

This thermostat installs very easily, especially if you have all the necessary wiring. I had a White-Rogers thermostat with a faulty outdoor sensor. Rather than replace the sensor, I upgraded to this t-stat for the color screen and online connectivity. The big benefits to this t-stat over others is:

1) can't beat the price

2) color screen is customizable and looks very high end

3) extremely easy to use and good looking user interface

4) no stupid expensive wireless gateway needed, just a simple WiFi card.

Mine is hooked up to a Rudd 2 stage A/C 2 stage heat pump with LP furnace unit. The Installer Test Menu was perfect for confirming all stages were working properly. Also, don't miss the dip-switches on the back of the t-stat during installation.

Once wired, it takes 30 seconds to boot up. The setup menus are so easy If you've ever used a Garmin GPS, you'll be right at home with this thermostat. The user interface is setup very similar, with big icons and a menu bar with a "back" button displayed on the bottom of the setup screens. If you want to get really user friendly, you can even enable the simple thermostat option, great for the less computer savvy users. I also love that it shows if you're using 2nd stage cooling or heating.

The Optional outdoor sensor was also extremely easy to install (2 additional wires). I mounted the sensor in my outdoor condenser unit. The outdoor sensor is very simple and doesn't appear to be weather resistant so you want to mount it either in your unit or under an eve or overhang of your home. The installation of this allows you to set a temp you'd like the emergency heat to run (i.e. mine kicks in when the temp goes below 35 degrees). Another benefit to installing the outdoor sensor is that it displays outdoor temp on the t-stat, along with high/low temp for the day in a pull-down menu (after upgrading the firmware).

The Optional WiFi key was also a simple install I had it on my wireless network and registered with VenStar in less than 5 minutes. Once it's online, you create an account on VenStar's website and enter the MAC address displayed on the t-stat. You then have full control of the t-stat and all configurations from your computer. Once you have your account created, you can also download the VenStar app on your phone. After signing in with your VenStar account, you can control the t-stat and see your daily/weekly usage.

The only "cons" i can think of is that this t-stat seemed to cycle my equipment more often than my old White-Rogers t-stat. This was easily fixed by adjusting the deadband settings and number of cycles allowed per hour in the installer menu. Also, why not include WiFi in the unit Having the key stick out defeats the purpose of purchasing a different colored frame. I'd like to see some more functionality in the App (such as ability to edit the weekly or vacation schedule), but these configurations can be made from your computer and could show up in a firmware upgrade. Also, make sure you have an SD card available so you can upgrade the t-stat firmware I used one from my digital camera.

I really can't give this t-stat enough praise. My buddy who works for a HVAC company commented that this is probably the easiest thermostat to configure. If you want an inexpensive, great looking color screen, and WiFi connected thermostat look no further. I've added some pictures in the user picture gallery.

Find helpful customer reviews and review ratings for Venstar T5800 ColorTouch Touchscreen Programmable Thermostat

I'm just updating my HVAC system, so now is the time for a 21st century thermostat. I looked at everything I could find on the market. Yes, Honeywell has one with a color screen. Yes there are several with color screens. I looked at the Nest, and I didn't like the round format. That's a lot of wall I would have to clean up around the old rectangle! Worse, the learning mode looked inappropriate for me, as my schedule is different every week. I really need to adjust it remotely as needed, and the optional WiFi adapter for this is perfect. i'm not sure how far it will communicate to your router, as mine is only about 6 feet (through one wall) away. My wife absolutely LOVES the screen savers. Unfortunately, you can't transmit photos over the wireless. You have to push them onto an SD card (not supplied) and load them onto the thermostat. And you can only put 100 photos onto it. But having pleasing vacation pix on a continuous slide show makes it a pleasure to walk past this thermostat. The features are extensive. Covers my new two-stage cooling system, as well as 2-stage heat. Remote adjustment via iPhone and Android has been flawless. While I can find lots of minor improvements, I really can't see ANY added feature that would put any competitor ahead.

Buy Fom Amazon Now

Saturday, August 9, 2014

Buy VillaWare V5555-20 Disney's Princess Waffler

VillaWare V5555-20 Disney's Princess Waffler
Customer Ratings: 4 stars
Buy Now
Bought this cute little waffle maker for my niece who loves the Disney Princesses. This waffle maker imprints deep belgium-like waffle marks on one side and Cinderella and her prince in the pumpkin coach on the opposite side.

These are quite large waffles. The first time we used it I made a small batch of batter (suggested servings 5-7 waffles) and was only able to make 1 1/2 waffles out of it. But they cook up quickly, sometimes done before the ready light turns off, and they are light and fluffy.

I found this one clearance for $9.97, and think it was a great buy. At the time I wouldn't have thought I would use it enough to pay $30 for it, assuming it was just a novelty item for us, but everytime I see (2-3 times a week) her she requests Princess Waffles.

Click Here For Most Helpful Customer Reviews >>

Sunday, May 18, 2014

Cheap GE 45601 Z-Wave® LED Handheld Remote

GE 45601 Z-Wave® LED Handheld Remote
Customer Ratings: 4.5 stars
List Price: $59.95
Sale Price: $42.57
Today's Bonus: 29% Off
Buy Now

First, the display is not backlit (-1 star), nor are any of the buttons. Forget working this device in the dark. Second, the remote has a quirk that may make you think that the remote (or a device) is not working! It's not really broke, though, so hold off on returning it ...

Here it is how I 'fixed' my remote:

If the remote does not recognize a module, "removing" the module on the remote WILL NOT WORK. You need to "DELETE" the module. "Delete" and "Remove" are NOT the same. "Reset" will NOT work. I was about to return the remote and the module that I bought, totally convinced that one or the other was broke! Follow the directions for "deleting" a device, and then try adding the device again.

A second tip holding down the button on a module/device will NOT do anything positive. Press it once, and release it immediately. Do not think that "maybe a really good press will help".

Now that I have "fixed" my remote, I like the product. The remote can be used to set up timed events like turning lights on or off automagically at specific days and times. The remote and z-wave network are really very sophisticated. Each module can function as a repeater to extend the range of the network. A Z-wave network is a real timesaver, but it is not for idiots. I almost did not make the cut for "smart enough", and I'm plenty bright. Good luck for the average Joe who'se VCR still blinks "12:00"!

I will eventually buy at least two more lighting controls. I am looking forward to installing Z-wave power strips and controls throughout my apartment.

EDIT 10/28/2010:

If you program "events", the range for timed events is different than the range for the buttons (my experience). The buttons have a really good range. I can use the remote buttons to turn lights on or off from the sidewalk. Timed events only seem to work reliably when I leave the remote within two feet of a module. This could be due to interference, but I do not know.

Click Here For Most Helpful Customer Reviews >>

I first bought an Intermatic HA09C remote but after being unimpressed I got this GE 45601. The GE remote is WELL worth the extra $18 and is currently now the primary z-wave controller in my house.

Pros:

1) Can individually control 18 devices with a shift key and 9 rocker switches

2) Can control 9 timed events (on + off are 1 event), which means it has an internal clock/calender, timed events can be enabled/disabled, events can trigger groups/scenes/individual devices

3) Can create groups and scenes, which I don't believe have to be the same as the 18 direct rocker controlled devices (you can add devices not assigned directly to a rocker)

4) Has a small text lcd to help in programming and labels (programmable) for devices.

5) Can set custom device options, like dim ramp rate (you need to know the technical details of the option, like set device option 1 to a value of 2)

6) Controls thermostats

7) Instructions are WAY better than Intermatic HA09C manual

Cons:

1) lcd is not backlit

2) No details when error occurs, for example I tried to program a scene for a non-scene capable device and it just would say "fail"

3) Can't query state of device and display on lcd

Best Deals on GE 45601 Z-Wave® LED Handheld Remote

I still don't know if I can get this to sync with my TZ45 Z Wave thermostat since it is already synced to my iHub and I'd have to unpair it in order to attempt that, but it works with lights and it is super cheap! I spent hours trying to figure out how to get this to work with my ADT Pulse Z-Wave system. The instructions don't explain that. It explains how to add lights and devices, but not how to sync it with existing hubs. Here are the steps.

1) Place the iHub and the remote near each other.

2) At the Web Portal, use the Add Device wizard to add an inclusion controller.

3) On the GE/Jasco Remote, press and hold SETUP until the display reads LGHT SETUP.

4) Use either Arrow key to scroll until the display reads TRANSFER.

5) Press OK and the screen will display PRIMARY.

6) Use either arrow key to scroll until the display reads RECEIVE,

7) Press OK and the Screen will display RECEIVING.

8) When screen displays SUCCESS you have successfully transferred the information from the iHub to the inclusion controller.

Honest reviews on GE 45601 Z-Wave® LED Handheld Remote

This item deserves five stars because it is a fantastic way to control zwave lights around the house. When I installed one to my ADT Pulse network last spring, it was painless: You went into the website's "system", "manage devices" and then chose "install inclusion controller." Once done, I was able to control 18 different light fixtures around my house with the remote and also preset lighting combinations such as which lights we want on at a certain dimmer level while we were watching television. That truly made both the remote and ADT great companion products, as we could control lights intricately with the remote but could also control lights with our alarm system.

Alas, we lost one of the remotes and tried to install a new one this week. After hours of thinking we had a technical problem with the install, we finally realized from ADT that they no longer allow customers to install these remotes as "inclusion controllers" on their system. Thus, when you go to manage devices, and install on the website, inclusion controllers have been eliminated. Add insult to injury, ADT did not even have the courtesy to remove the installation instructions from their online manuals which resulted in many wasted hours of fruitless attempts trying to install. Most staff in the Pulse technical department when I called for help were unaware that the problem was simply the items are no longer supported.

Once you install the ZWave light switches and use the remote you will never want to go back. I am now perplexed what to do because I have had the ADT Pulse system for less than six months and would have definitely considered a competitor's product if I had known the company would take away this level of compatibility.

If you are shopping for an alarm system that makes full use of ZWave technology, you may want to consider brands that compete with ADT and make more sophisticated use of the technology. You can start by doing a web search along the lines of "adt pulse not compatible with inclusion controllers" to find internet postings about this problem and other home security systems in the market place.

For anyone simply using the Zwave technology without the home security system, this GE remote is fantastic.

Find helpful customer reviews and review ratings for GE 45601 Z-Wave® LED Handheld Remote

Despite its basic appearance, the GE 45601 easily controls my Trane thermostat (interactively shows you the current setpoint and mode, and lets you alter them), and it's capable of doing transfers to a secondary controller, such as a PC based Z-wave controller.

Setup was very intuitive. I didn't need to look at the instructions.

The only negative is that it's not backlit. Fortunately, it's pretty easy to turn the lights on if I need to read the display. :)

Buy Fom Amazon Now

Monday, May 5, 2014

Discount Lasko #5775 Ceramic Tower Heater

Lasko #5775 Ceramic Tower Heater
Customer Ratings: 4.5 stars
List Price: $49.99
Sale Price: $46.99
Today's Bonus: 6% Off
Buy Now

This is a good heater. We have purchased it for our bathroom and it does a good job in heating it quickly. We know it states it is not intended for a bathroom, but those that are rated for a bathroom just have a GFI on the end of the power cord. We already have a GFI outlet that I use offering the same protection.

The timer is a nice feature and easy to set from 1 hour to 7 hours or anywhere in-between in increments of one hour. The oscillation works as expected. The power level is either 900 watts or 1500 watts. All of those options are easy to set.

The thermostat is an area we would like to see improved so that it works at the 900 watt setting. Our bathroom is small and really does not need that much heat. The thermostat only works on the high heat, 1500 watt setting. The manual states this if for "increased efficiency" which I do not understand. 900 watts is 900 watts and 1500 is 1500 watts. Have a thermostat turn it on or off does not make it any more efficient. If you get more BTUs per watt, that would be more efficient in my eyes. Plus, when I tried it on the thermostat, there appears to be a cool down period after you reach the desired temperature which I think is a good for the unit.

We like the heater and would recommend it to others given the above.

Click Here For Most Helpful Customer Reviews >>

We just received our Lasko Ceramic Tower Heater Model #5775 yesterday and could immediately see that this unit really does a great job of heating up our family room. We were using an EdenPURE which was a large applicance, over-priced and not energy efficient. It never really heated the room well. We won't know about the energy cost until we get our next electric bill but as far as the heating it works great!!! It is very quite operating, looks nice and doesn't take up much room. So far we love this heater!!! I had read consumer reviews on this heater which were excellent. Also the price is great. We paid over $300 for the EdenPURE and it was not worth it. It was a rip-off.

Best Deals on Lasko #5775 Ceramic Tower Heater

Hoping the "plastic bag roasting in the oven" smell eventually wears off. Other than that this works well. I have no idea, still, how the temperature setting works. I left it 65º and it runs for some mysteriously predetermined amount of time and then shuts itself off. Also, it seems that the electronics panel on top stays warm when left plugged in so it's an electricity vampire.

Honest reviews on Lasko #5775 Ceramic Tower Heater

We have been without a furnace since January 1st 2012. We have two of this type of heaters. We live in Michigan. Keeps our home warm. I highly recommend this heater. Well worth the money.

Find helpful customer reviews and review ratings for Lasko #5775 Ceramic Tower Heater

Bought two of these one for my son-in-law in his workshed separate from his house, and another for us to use in our living room. I didn't want to keep heating the whole downstairs floor when we spent most of the evening in the living room only. It did eventually warm the room a few degrees and would have been OK if it didn't keep blowing the breaker switch. Our house has quality wiring and we don't have much of a problem with this sort of thing. We sometime have some pretty heavy electrical loads from an electric stove, electric oven, electric dryer, lighting, and air conditioning with no problem. The house has GFS breakers throughout, as well as the main breaker panel in the garage. Built in 1993. But the constant blowing of the breaker in the main panel dedicated to the living room (where we were only using the TV and one lamp), is too much of an annoyance, so it is basically useless for us. It has to be the heater, because we've run in the living room, the TV, stereo, lamp, main light, another lamp, foot massager, and a massaging chair all at the same time with no trouble. My son-in-law sent his back and got a more powerful heater. His house and workshed are much older (1960s built) but he has no trouble with blowing the breakers with a different brand of more powerful heater. Don't know why this one does it, but it's pulling too many amps or volts or something. I'm not an electrician so I don't know the exact problem but I do know it's related to that heater. No problems when it is not running.

Buy Fom Amazon Now

Friday, April 11, 2014

Panasonic SR-G06 3 Cup Electric Rice Cooker - 220 volt For Overseas Reviews

Panasonic SR-G06 3 Cup Electric Rice Cooker - 220 volt For Overseas use only NOT FOR USE IN USA/CANADA
Customer Ratings: 3 stars
Buy Now
Ok, I should have read the description more thoroughly before I purchased this. We predominantly eat brown rice and there are no settings or water levels on this rice cooker for brown rice. On the occasional times we eat white rice, it has cooked it fine. I would be nice to have a spoon rest on the side somewhere.

Click Here For Most Helpful Customer Reviews >>

I was looking for a light-weight rice cooker for oversea travel (i.e., 220v) and this product seemed to be only one available in U.S. I brought it with me to Germany three weeks ago but after 5 uses it stopped working. I tried hard to diagnose the problem myself but could not figure out what's wrong the light would still go up but it just no longer heats up. This really sucks. I don't know who is to blame the product itself or the distributor (I bought it from Bombay Electronics. They shipped me an Arabic version even though the original web page said it has English manual...)

Best Deals on Panasonic SR-G06 3 Cup Electric Rice Cooker - 220 volt For Overseas

Bought this for sister studying abroad. It came in pink and was very cute. Although I would have been horribly disappointed if it was for a male. But it worked for me. This is the cheapest we found after searching through million sites.

Buy Fom Amazon Now

Saturday, March 29, 2014

White-Rodgers UP400 Touchscreen 7 Day Programmable Universal Review

White-Rodgers UP400 Touchscreen 7 Day Programmable Universal Thermostat
Customer Ratings: 4.5 stars
List Price: $99.99
Sale Price: $84.29
Today's Bonus: 16% Off
Buy Now

Customer review from the Amazon Vine Program

The video provides a quick overview of the thermostat and steps through some of the menu options.

Overall, I'm very happy with this thermostat. It replaced an older programmable thermostat that came with my house in 2000 and still worked fine, but this one has some nice added features such as a large touchscreen and a reminder to replace my air filter. Although the touch screen only registers a touch at certain locations, it is a nice step up from the small screen on my previous unit. It's really easy to read the screen when the back light is on after you've touched the screen. I also like that its hysteresis (how far away from the set point that it turns on and off) is pretty narrow it doesn't run as long as my older thermostat, and it keeps the temperature in a more comfortable band for me. That was an unexpected and pleasant surprise.

It's not perfect, though. It's a bit difficult for me to read in its normal (no back light) condition, and there's no menu option to change the contrast of the LCD screen (which surprised me). It also, and this is just personal preference on my part, doesn't display the time of day unless you touch the screen. I was used to being able to see the time as I walked by the thermostat in my hallway. Not a big deal, but I wish it showed it.

Pros:

(*) Controls temperature to a narrower band than some other thermostats (smaller hysteresis)

(*) Nice, big screen

(*) Screen is very easy to read when the back light is on

(*) Is easy to mount and is pretty flush against the wall

(*) A number of menu settings that are easy to navigate, including (and one of my favorite features) a reminder for replacing an air filter

Cons:

(*) Screen is fairly dim unless you touch it and have the back light turn on (but it turns off fairly quickly), and there is no menu setting to adjust the LCD contrast

(*) Clock only displays when you press the screen

At its current price of $90, there are a number of options out there to choose from in this price class. While it's not perfect, it is nice and I recommend giving it some consideration as you shop around.

Click Here For Most Helpful Customer Reviews >>

Customer review from the Amazon Vine Program I was looking to find a new thermostat to replace my old thermostat that came with the house.

I wanted 3 things large display, lighted display, simple. And this fit the bill.

Pro's:

*Large screen

*Simple set up (My Mom was able to use it while house sitting). "1 touch" Settings for away, home, sleep

*Interchangeable faceplate (to match wall plate colors)

-

Con's:

-Touch screen is not as responsive as a smart phone (its only really active on the outer edges)

4/5 stars

Best Deals on White-Rodgers UP400 Touchscreen 7 Day Programmable Universal

This is a great improvement over old, simple thermostats.

It has a large screen that lights up once you touch it...even though it sometimes takes several touches in the right areas for it to come to life. So here are some details for you to be able to make a decision to buy or to pass.

Pro's:

Nice large screen

Very easy to set up

interchangeable color borders (inserts to match the color of your wallYellow, gold/light brown, light grey, white and transparent)

31 touch favorite settings (Away, Home, Sleep)

Nice large numbers (large digital buttons)

simple to operate

Lots of installation options and works with a lot of different systems (however mine is pretty straightforward so I have not tested this).

Con's:

-Only one, the touchscreen is only activate around the edges, if you press the middle where the readings show up it won't activate (therefore the 4 stars).

So far it's temperature sensitivity and readings have been pretty accurate. It's very easy to change and adjust settings on the fly...now it's not a Nest but really a top of the line Thermostat, definitely a BUY.

Honest reviews on White-Rodgers UP400 Touchscreen 7 Day Programmable Universal

Customer review from the Amazon Vine Program I had never installed a thermostat before but had been reassured by many that the industry has reformed itself over the last decade and home installation is pretty easy. We have a one year old condo this unit is going in and I was able to remove the old thermostat and install the new one in less then an hour which is way quicker then I thought it would take me.

We don't have AC, just a fan and heat and everything seems to be working fine. The programming is easy and in general the interface was intuitive.

The only reason I don't give this five stars is thats it's a bit of an eyesore. Obviously the NEST is the aesthetic champion at twice the price (but also with more features) but perhaps White Rodgers can make this a little more stylized as its very prominent in our living room. I wished it didn't look like it belonged in a dentists office.

Find helpful customer reviews and review ratings for White-Rodgers UP400 Touchscreen 7 Day Programmable Universal

Customer review from the Amazon Vine Program I approached installing the thermostat with some trepidation, I'd never done something like this before. Reading the reviews made me feel a little more confidence ("if they can do it!") so I dove in, and by dove in, I mean I read the manual then read it again and then once more for good measure. From what I was reading, it seemed like it would be an easy installation.

In fact, as it turned out, extricating the thermostat from its Fort Knox was the hardest part of the entire endeavor. Being careful to label the wires out of the wall according to the tremendously helpful diagrams, I was soon pushing them into the contact receptacles. In all, it took me less than 15 minutes to remove the old thermostat and put the new one in.

The second-most difficult part of this adventure was the programming itself. At first, the manual instructs you to keep things as they are, default out of the box and to attempt actual programming later. After some brainwork, I was able to decide what temperature settings I would be using. I wager that without the manual, you'd have little chance of success since there were some settings identified only as "3" and no titles.

Once the temperature settings were sorted, actually programming the thermostat was quite easy. In the few days beforehand, we would manually set the temperature on the touch-screen and either "permanent hold" it (with useful buttons labeled clearly) at that temperature or "temporary hold" until the next temperature switchover time. Nifty. Each button press is accompanied by a satisfying and confirmatory beep. After a while, the neon green backlighting turns off leaving a washed-out grayish background which is very difficult to see in dim lighting. The way to turn it back on is to find and press an "active" key (like the temperature setting button). This is almost impossible to do when it's dark.

Anyway, since programming was completed a few weeks ago, it's been set-it-and-forget-it. With this thermostat from the Alpha Centauri(!), it is possible to set it on either the cool or heat settings or have the thermostat automatically switch between them. That last setting has been extraordinary. No longer do I need to come home and immediately rush to the thermostat to start the heat cycle this winter.

Apart from the non-existent backlighting that forces you to hunt and peck on the screen to turn it on in the dim, this is an excellent piece of hardware and I wonder why I didn't get one before now. 5 stars!

Buy Fom Amazon Now

Tuesday, February 11, 2014

Mr. Heater MH125FAV 125,000-BTU Forced-Air Propane Heater Review

Mr. Heater MH125FAV 125,000-BTU Forced-Air Propane Heater
Customer Ratings: 5 stars
List Price: $293.67
Sale Price: $179.99
Today's Bonus: 39% Off
Buy Now

right out of the box worked great. Heated a 34x34 garage in no time at all. only problem the propane tank I was using was frozen. Temp in the garage before the heater was -5 after it was 50.

Click Here For Most Helpful Customer Reviews >>

This is a FANTASTIC heater but there are some things a new buyer should be aware of. It'll bring a 30x60x12 garage from 0 to 60 in about an hour and a half. However you really do need a 100 lb tank. You can get away with a 40 or 50 lb heating a smaller area on low otherwise the tanks will condense and shut off the gas flow to the heater. They are louder than you'd expect if you haven't used one of these before because of the blower fan. Think mini jet. I've also used the convection style heaters and depending on your needs these are both great. The convection style is much quieter but takes a fair bit longer to heat a large space and you won't get as even a heat in the room. For larger spaces or fast heat up the forced air heater is an awesome product.Mr. Heater MH125FAV 125,000-BTU Forced-Air Propane HeaterMr. Heater 80,000 BTU Propane Convection Heater #MH80CV

Best Deals on Mr. Heater MH125FAV 125,000-BTU Forced-Air Propane Heater

I'm in the process of insulating and paneling a 12x30 portable building to be used as a workshop. During the winter it get's a bit cold here. I got this hoping it would heat the building enough to work comfortably. I couldn't. Kept having to turn it off after every 15 minutes of run time and wait 45 minutes to an hour before needing it again. That's a lot of heat from a device that's slightly larger than ones thigh. It uses very little propane for a LOT of heat. I heartily recommend it.

Honest reviews on Mr. Heater MH125FAV 125,000-BTU Forced-Air Propane Heater

This thing really works like a charm. The only bummer is the slight propane smell when used in a slightly enclosed place. Heats up a large space in minutes.

Find helpful customer reviews and review ratings for Mr. Heater MH125FAV 125,000-BTU Forced-Air Propane Heater

I can now change my uninviting work area in the northernmost portion of Michigan from a freezing cold refrigerator into a shirtsleeves comfortable shop. This heater does everything I'd hoped for.

Buy Fom Amazon Now

Saturday, February 8, 2014

Coolerguys Cabcool1203 Three 120mm Fan Cooling Kit w/thermal Reviews

Coolerguys Cabcool1203 Three 120mm Fan Cooling Kit w/thermal control for Cabinet or Home Theaters
Customer Ratings: 5 stars
Buy Now
I have a little AV cabinet that held in all the heat from my PS3, xBox 360 and reciever. it caused the reciever to die and was a very costly repair. These fans make all the difference. They are very quite, you can hardly hear them running from 10 feet away, and the overall noise is very low, it does not bother you when they are on or take away fromt the vewing or gaming experience. They are thermistatically controlled to turn on and off at 80 degrees which makes sure they are only running when they are needed.

Great product, would recommened.

Click Here For Most Helpful Customer Reviews >>

I was looking for a cabinet exhaust fan kit for my cabinet which includes Dish HD DVR and external USB Hard Drive in one shelf, PS3 with another external USB Hard Drive in another shelf of the cabinet with other components like audio receiver, dvd multi changer, dvd recorder in other shelfs of same cabinet.

Many times dish receiver switches itself off due to overheat in the cabinet. Similar problem with PS3.

I bought this CabCool1203 kit and installed in first shelf contaning dish hd receiver and usb hard drive. Although first I thought the assembly will be complex but it was so easy after watching the video on YouTube (and even with instruction that comes with kit). This product works perfectly. Fans comes on automatically as son as temperatures goes above 86F and switches off at 81F. Recommend it to everyone who has hard drive based electronics in the closed cabinets.

I am going to buy one more of these kits now for my PS3 shelf also.

Thanks CoolerGuys.

Best Deals on Coolerguys Cabcool1203 Three 120mm Fan Cooling Kit w/thermal

Works great so far after 30 days of use. Only negative aspect, it is a little pricey in my opinion. Installed easily, love the automatic thermostat feature.

Honest reviews on Coolerguys Cabcool1203 Three 120mm Fan Cooling Kit w/thermal

1. It arrived quickly.

2. Had to be put together, but I liked that you could choose which way to have the fans blow, and less work to take it apart if you wanted to change it.

3. Parts were all there, bolts, nuts, etc.

4. Easy to hook up and mount, 20 min or so.

5. Fan kicks on whenever my amp gets hot.

6. The only downside is it does generate some noise, but not enough to detract from the TV when playing.

Find helpful customer reviews and review ratings for Coolerguys Cabcool1203 Three 120mm Fan Cooling Kit w/thermal

My husband bought this fan to install in the back of our 90" TV console. He is a techie so we have a lot of electronics in there. Other than when he has 12 hour LAN parties the glass doors don't need to stay open. This fan quietly and effectively deals with the heat build up.

Buy Fom Amazon Now

Monday, December 2, 2013

RANCO ETC-112000-000 Digital Temperature Control NEW Reviews

RANCO ETC-112000-000 Digital Temperature Control NEW
Customer Ratings: 2 stars
List Price: $117.46
Sale Price: $59.99
Today's Bonus: 49% Off
Buy Now

Mine lasted five years when it started to run my hot water temperature up to 212 Fahrenheit whenever there was a power outage. This caused my geothermal compressor to blow it's pressure relief valve. This is not cool because this is the weak spot of my geothermal compressor: Pressure too high in the system could cause a $2000 repair. After researching on the Internet, I discovered that this is a common failure mode for this device. Now I have to replace this thermostat after only five years. Bummed.

My defective unit is also throwing an E2 memory error code. The workaround is to change the degrees to Centigrade. Weird.

Click Here For Most Helpful Customer Reviews >>