Showing posts with label temp controller. Show all posts
Showing posts with label temp controller. Show all posts

Friday, January 2, 2015

Reviews of White-Rodgers 1F80-0471 Digital 5/1/1 and 5/2 Day Programmable

White-Rodgers 1F80-0471 Digital 5/1/1 and 5/2 Day Programmable Thermostat with Auto Changeover and Energ,
Customer Ratings: 4 stars
Buy Now
It's a nice product but it requires too many sub-menu navigations to get it started. The blue light is nice but its intensity should be adjustable.

Click Here For Most Helpful Customer Reviews >>

This is a Emmerson brand not a White Rodgers. The wall mounting plate did not engage the actual unit tightly and it felt as though it would fall off the wall. I am also dissapointed that I had to pay almost $10 in shipping just to return it.

Best Deals on White-Rodgers 1F80-0471 Digital 5/1/1 and 5/2 Day Programmable

I use this same tstat at work and they are one of the best available the display is easy to read and the unit is easy to set up I recomend this to anyone --

Honest reviews on White-Rodgers 1F80-0471 Digital 5/1/1 and 5/2 Day Programmable

This thermostat was easy to install and program, and worked as advertised nearly a year. EXCEPT…3 times, several months apart, its clock reset to 12am for no apparent reason. After the 2nd time I replaced the batteries, even though they'd tested good, but it happened again a few months later. I reluctantly concluded the thermostat was defective. Fortunately it was still within Amazon's guarantee period so I contacted the seller and returned it.

I should mention that (before I realized I could still return the unit to the seller) I tried contact the manufacturer via their web forms several times with no success. To be honest I didn't try calling I've wasted enough lifespan waiting for "the next available representative".

So, despite having a 5-year warranty and a large number of positive reviews, I can't recommend this thermostat. I do however commend the seller, Plumbing Planet, for standing behind what they sell.

Find helpful customer reviews and review ratings for White-Rodgers 1F80-0471 Digital 5/1/1 and 5/2 Day Programmable

After doing several weeks of research and reading 100s of reviews and comments, this was my choice. Installed easily in my home (single stage heat pump). I was so happy that I purchased an additional unit and installed it in my son's home (single stage air conditioner with gas heat). This thermostat works in either configuration with a simple switch change on the back of the unit. I'm surprised there aren't 100s or even 1000s of reviews on the thermostat because, IMHO, it is simply the best choice.

Buy Fom Amazon Now

Monday, October 27, 2014

Best DeLonghi DFH132 SafeHeat Fan Heater Deals

DeLonghi DFH132 SafeHeat Fan Heater
Customer Ratings: 4 stars
Buy Now
This is the inexpensive heater I've been looking for. (1) It's fairly compact (9-1/2 w x 7 d x 10 h) and because it's curved instead of boxy it seems smaller. (2) An unexpected bonus, finally a cord that's realistically long 6-1/2 feet so I won't need an extension cord. (3) The thermostat works reasonably well, in terms of sort of maintaining the temperature something I wondered about in a cheap heater. Though the right setting and how well it works will probably depend on where it is (floor, countertop). And the thermostat probably can't be expected to work well in an especially drafty location.

As others have noted It's quiet (though not silent). There are two heat settings, though as noted just one fan setting. The numbers on the dials are hard to read except up close.

Click Here For Most Helpful Customer Reviews >>

We moved into a new office and the building is VERY chilly...I couldn't take it anymore so I got this little heater and overall I couldn't be happier. I am now warm and toasty all day long! The heater is a small size, so it can fit under your desk without problem even if you sit in a cube at work. It's also lightweight and has a lot of safety features so you don't have to worry about burning anything down. The thermostat feature is nice because it will keep your space maintained at a constant temperature.

One "minus" is that it doesn't really have an "OFF" switch the red light always stays on when it's plugged in. I agree with other reviews that the controls are also very hard to read, so you have to be up close & personal with it to get it to the setting you want. Also, the thermostat is not something you can really figure out "out of the box" you definitely have to read the directions to understand how to use it. But those "flaws" are so minor that you shouldn't let it influence your purchasing decision. It is TOTALLY worth every penny!

Best Deals on DeLonghi DFH132 SafeHeat Fan Heater

I bought this heater three years ago based on the good reviews and cheap price. I expected it to get me through that winter only. I have used this thing just about daily for the past three years, heat in fall/winter and fan in summer. It still works quite well and seems ready for the upcoming winter. The only problem I am beginning to notice now is that the on/off/heat control wheel is starting to become loose. Otherwise it does a great job for the intended task and has already lasted longer than anticipated. The thermostat on it is finicky and takes a little playing around with it to do basically what you want but the heat does cycle on/off more or less appropriately. I'd give 5 stars if the thermostat was perfect but it is what it is and that is good enough. I just bought two more, my old one will go to the garage for duty there until it eventually fails. A good, solid product for a very good price.

2012 Update The original heater is still functional and kept me warm and cozy in my garage over this winter. :)

Honest reviews on DeLonghi DFH132 SafeHeat Fan Heater

I live in a small room and when i turn up the heater, it gets pretty warm quickly. Very safe and i like the fact that it works on the floor or on the table. Not very noisy and the thermostat is working just fine for temperature control.

Find helpful customer reviews and review ratings for DeLonghi DFH132 SafeHeat Fan Heater

I use this heater in my cold basement under my computer desk, and I'm pretty happy with it. I was worried about the noise because I use a lot of speech-recognition software and a noisy fan doesn't help accuracy. It's not as quiet as I had hoped, but it's not bad, and my SR software doesn't seem to be affected. Negatives: Only one fan speed; it could use at least two. Also, the numbers on the thermostat and heat control dials are hard to read not a big deal, since it's also very simple. The 750 watt setting doesn't put out a lot of heat, so I mostly use the 1500 watts. On the plus side, it seems to be very safe, the thermostat cycles just fine so it holds the desired temperature pretty well, it's nice looking, and hey, it's cheap! You can't really go wrong for 15 bucks.

Buy Fom Amazon Now

Monday, October 20, 2014

Oregon Scientific THT312 Indoor/Outdoor Thermometer Clock Reviews

Oregon Scientific THT312 Indoor/Outdoor Thermometer Clock with Wired Probe
Customer Ratings: 4.5 stars
List Price: $19.99
Sale Price: $19.98
Today's Bonus: $0.01 Off
Buy Now

I can't begin to tell you the abuse I've subjected this product to.

1Used it on my RV. Probe was outside from freezing to desert for 6000 miles.

2Took it up to Alaska and back, 15,000 miles.

3Used it to determine the temp. of my developing solution (very caustic chemicals).

4Now it's being pecked by chickens in my brooder.

I seem to never replace batteries in this. I can only remember doing it twice in 6 years.

Buy this product. Have no worries. It truly is a 5-star product.

2012 Update: Still works in my classroom. I think, after the nuclear armageddon, it will be the only piece of tech surviving.

Click Here For Most Helpful Customer Reviews >>

After reading a ton of reviews, I decided all of the moderately priced digital thermometers had flaws so I went with the brand that overall seemed well rated (Oregon Scientific). I also read that remote sensors were problematic so I chose this model because it uses an attached (wired) sensor. I am delighted with the performance of this model. I followed the instructions and placed the outdoor sensor in a protected location (the wire fits easily under my window (even with it locked for the winter). I've checked the indoor temp against my thermostat and it is within a few tenths of a degree. I've checked the outdoor temp against weather.com and the local radio station and it is also within tenths of a degree. That's accurate enough for me! I love having the clock too and the back-lighting comes in handy during the winter when it is dark in the morning. If you have a nearby window to run the wire through, you really can't go wrong with this thermometer.

Best Deals on Oregon Scientific THT312 Indoor/Outdoor Thermometer Clock

This does what you want it to. Accurately tells the temp indoor and outside and refreshes itself about every 30 seconds. What more could you ask for? Theres also a blue backlight so you can press any button during the nightime. It also functions as a clock with an Alarm but I dont use it.

Honest reviews on Oregon Scientific THT312 Indoor/Outdoor Thermometer Clock

I bought this to monitor the evening outdoor temperature. When it finally cools off enough outside, I turn the air conditioner off and run just the fan on fresh air. This was simple to set up and seems to work flawlessly. I like that a change in temperature registers very quickly in tenths of a degree.

Find helpful customer reviews and review ratings for Oregon Scientific THT312 Indoor/Outdoor Thermometer Clock

The Oregon Scientific Thermometer and Clock is incredibly durable. I bought it from Targét 5 years ago and it still works as well as the day I bought it!

The LCD display is large enough so that it can be easily read from about 15' away. It has a backlight that you can turn on with the push of a button, which is conveniently located in front of the unit. The LCD screen has three lines for:

1) Time

2) Indoor Temperature

3) Outdoor Temperature

The unit has a 10' long probe for monitoring outdoor temperature (or the temperature of the location where you chose to place the probe).

Features

--------

Maximum / Minimum Temperature

The readings don't show the max/min temperature for the day. It only shows the max/min temperature *since these readings have been last reset*.

The Maximum / Minimum Temperature reading can be accessed with the right-most button on the front of the unit.

> When the button is pressed, lines (2) and (3) display the Maximum Indoor Temperature and Maximum Outdoor Temperature, respectively.

> Press the button a second time to access the Minimum Indoor Temperature and Minimum Outdoor Temperature.

> Press the button a third time to revert the display for lines (2) and (3) to the Indoor Temperature and Outdoor Temperature, respectively.

> Press and Hold the button to reset both the Maximum and the Minimum Temperatures.

Alarm

The alarm is a little soft and chimes for just a minute. The time of the alarm can be accessed with the left-most button.

Backlight

The backlight is bright and makes the LCD display easy to read in the dark or in dim lighting. The backlight can be accessed with the button in the middle.

Degree F or Degree C

The temps can be displayed in either degree Fahrenheit or in degree Celsius (AKA degree Centigrade).

Conclusion

----------

The Oregon Scientific Thermometer and Clock is a durable piece of equipment. The controls are user-friendly and intuitive. Its large and easy-to-read LCD display helps you to easily read the indoor and outdoor temperatures. Definitely recommended!

Buy Fom Amazon Now

Saturday, September 6, 2014

Discount Corning Digital Hot Plate, 5" x 7", 120 VAC

Corning Digital Hot Plate, 5' x 7', 120 VAC
Customer Ratings: 5 stars
Buy Now
Great hot plate has seen many hours of use at MOPCLABS. The hot surface light flash until cooled down, this keep the fingers from getting burned trying to clean it off to quick. Perfect size and easy to clean A+++++

Click Here For Most Helpful Customer Reviews >>

Tuesday, July 15, 2014

Discount Holmes HCH4266WGL-U Twin Ceramic Heater with Manual Thermostat

Holmes HCH4266WGL-U Twin Ceramic Heater with Manual Thermostat
Customer Ratings: 4.5 stars
Buy Now
We have oil heat and a very large older home so try to conserve running the furnace when you only need to warm up a few rooms. This heater is great for my livingroom it's has 2 ceramic heater units built into it, quiet, heats the room up very quickly would recommend it to anyone. Ceramic heaters use far less electricity than traditional heaters.

Click Here For Most Helpful Customer Reviews >>

We bought this ceramic heater to heat our Airstream TT as the propane heater heats great but is just too noisy. This heater is quiet, emits a suprising amount of heat, and you can adjust the temperature. All in all a very good value.

Best Deals on Holmes HCH4266WGL-U Twin Ceramic Heater with Manual Thermostat

This little power house is easy on the wallet, very powerful, heats up in an instant and silent: there is no noise. I am very pleased with the quality of this item and intend to stay with this because I have to pay high gas bills and I use it to heat the room instead of turning on the gas heat. Works like a charm and makes the room toasty and warm without taking a lot of money either! I highly recommend this. Not one complaint. Very extremely pleased.

Honest reviews on Holmes HCH4266WGL-U Twin Ceramic Heater with Manual Thermostat

I got this to replace a long line of space heaters that have failed

Pro's:

I have a very large bedroom (about 500 sq. ft.) and it does a very god job of heating it quickly

low profile and light weight makes it easy to move, but be careful

fairly quiet

good thermostat control, with 2 different fan settings

removal intake cover and "filter"

Con's:

needs 3 feet clearance on all sides per instructions

"filter" on the backside will only catch large clumps of dust, smaller hairs or bits of dust go right through and hit the heating element

cycles on and off a lot when reaches temperature, but would only wake a light sleeper

no GFI built in

BIGGEST CON : the expanded metal grate on the front gets very hot after short usage. It gets hot enough to give a nasty burn if touched. There is no secondary plastic grill as a guard. DO NOT LET SMALL CHILDREN OR PETS NEAR IT! This could be a recall issue in the future.

Handle: it's oddly placed on top so the average person would be more likely to grab it by he side to move it. MISTAKE: that's how you get a nasty burn.

I don't have any small children and my dog won't go near it, so I will keep it unless recalled.

Find helpful customer reviews and review ratings for Holmes HCH4266WGL-U Twin Ceramic Heater with Manual Thermostat

I had previously owned this same unit and was delightful that I could find the exact replacement. I use it in my office as it is small and can be placed in any area.

Buy Fom Amazon Now

Wednesday, June 4, 2014

Discount White Rodgers 50M56U-843 Universal Single Stage HSI Integrated

White Rodgers 50M56U-843 Universal Single Stage HSI Integrated Furnace Contro...
Customer Ratings: 3.5 stars
List Price: $169.83
Sale Price: $102.60
Today's Bonus: 40% Off
Buy Now

I got this to replace a 50a55-480 controller for my Trane furnace (TDE080).

I got it instead of the cheaper 50a55-843 for 2 reasons:

1) It drives newer Silcon Nitride ignitors which are supposed to be more reliable than the older silicon carbide ignitors. It will also drive your existing silicon carbide ignitor.

2) This kit also includes an ignitor, worth about $25. I keep it as a spare until my SiC ignitor fails.

Installation is easy using the supplied instructions, but there are a few things to note:

1) The unit mounts to the same clips as the 50a55-480, but is about 1/2 inch wider on the left side (with LED).

2) The indicator LED is in a different place, so I had to drill a new 1/4" hole in the furnace to be able to see the light from the outside.

3) The harness adapter (F) works fine and provides a spade clip for the Flame Sensor. Also be sure to install the rollout jumper between pins 5 and 11. Trane furnaces don't have rollout sensors. I preferred to skip the adapter and do a little minor surgery to attach a spade clip directly to the flame sensor wire. The gas valve connection is OK as long as the controller is configured for a single-stage furnace.

4) When the thermostat's Fan-ON switch is set, most controllers enable the cool-H fan terminal. However, this controller enables the Heat-L terminal. You should connect a "parked" (red, blue, yellow) fan lead to Heat-L, or if you don't have air conditioning, connect the black cool-H lead to the Heat-L terminal instead.

5) As mentioned in a previous review, all of the 6 neutral spades are connected together, so it doesn't matter which ones you use. To be extra nerdy, put the incoming line-N on a center terminal and Fan-N and Xfrmr-N on the adjacent terminals.

Click Here For Most Helpful Customer Reviews >>

This was to replace a obsoleat one, the wireing instruction could have been more expliced to the one it is to replace.

I wouldn't have had to call in the HVAC guy, to be sure I had it right. It works the air, now if it works the heat and the humidifier in the heating season, the I'll upgrade my rateing to "Love IT", cause I sure saved a lota money.

Best Deals on White Rodgers 50M56U-843 Universal Single Stage HSI Integrated

Very easy installation, if you are a DIY type of person then replacing this control module will be a piece of cake. The instructions are clear. Came with a large selection of adapter connections for many different type of applications. The seller shipped out the product the same day it was ordered and was delivered a day early! Which was good because it was getting chilly in my house.

Honest reviews on White Rodgers 50M56U-843 Universal Single Stage HSI Integrated

It was the wrong board and the instructions said it was nonreturnable. If you need a control board, buy the Orem version.

Find helpful customer reviews and review ratings for White Rodgers 50M56U-843 Universal Single Stage HSI Integrated

glad to get this as our CENTRAL A/C wasn't working and it was getting HOT! took me awhile to figure it out but all is good. a tech would have charged me about 500 dollars to do this. i figured it out myself because i am a mechanic / computer guy.

Buy Fom Amazon Now

Thursday, January 16, 2014

Cheap DeLonghi EC270 15-Bar-Pump Espresso Machine, Black and Stainless

DeLonghi EC270 15-Bar-Pump Espresso Machine, Black and Stainless
Customer Ratings: 3.5 stars
List Price: $280.00
Sale Price: $88.49
Today's Bonus: 68% Off
Buy Now

UPDATE 3: I have now had this Espresso maker for almost two years and it is still going strong. No problems at all since I replaced the water tank. The coffee quality is still excellent. I use the machine daily and descale about once every six weeks or so. I still love the coffee that this machine makes I get freshly-roasted beans from Peace Coffee online and grind a week's worth at once. This coffee is so good much better than any coffee house can make. I'd definitely buy another of these machines if this one died. It is easy to use, foolproof, and makes wonderful coffee.

UPDATE 2: I found a replacement water tank fairly cheaply online. It totally fixed the leaking problem. The through-flow problem and pump noises that made me think it was dying seem to be down to the fineness of the grind. I made the grind a little coarser and stopped tamping it so hard (apparently you don't need to tamp the coffee so much for these pressurized portafilter machines). Now it is working again just like new! So I am upping my rating to 4 stars, as the tank may need replacing every so often, but this is very easy if you know where to look ( just search on brand and model number EC 210). It was very easy and inexpensive (10.95) to replace the tank. The new tank had a tighter fit than the original perhaps it will last longer. I'm a happy bunny again, now I am getting my daily fix of espresso once more ... :-)

UPDATE 1: Seven months of wonderful coffee, but now getting floods all over the counter, with a distinct lack of flow/throughput from the espresso head. DeLonghi were no help at all in fixing the problem, even though the machine was still under warranty they asked for multiple details over the course of 6 emails, told me it was out of warranty (they take the date of manufacture) and then told me to ship it 100 miles to get the problem sorted once I emailed a scan of my original invoice (they only have a few espresso machine repair centers in the USA). It was cheaper to obtain a new tank from a third-party supplier than to ship the machine. So don't expect to get this (apparently really common) issue fixed under warranty.

ORIGINAL REVIEW:

The machine is easy to use: you need to run two lots of heated water through the espresso filter part to heat it up (takes 3-4 minutes, including wait time for the light on top to tell you that it has reheated between runs). Then you can pop in the pod or a tamped espresso filter and make your coffee. I use Peace Coffee Guatemalan espresso beans, ground fine with a Braun burr grinder. If I can't be bothered to grind the next few days' supply, I use Lavazza Espresso Pods Gran Crema, 150-Count, .25-Ounce Pods. Both make excellent coffee, although the Peace coffee is to die for!

The milk steamer/frother works perfectly for me. For the reviewer who said they could only get froth out of this, you need to hold the milk jug closer underneath the wand and at an angle so that the steamer is near the bottom of the jug. If you just put the tip of the steamer wand in the milk, you get froth. If you immerse the wand so that the steamer is close to the bottom of the jug, it steams the milk with very little froth. Move the jug down on the frothing wand as the milk is heated, to add as much froth as you want by steaming the top 1/2 inch at the end of the heating process. I'd really recommend the Krups XS5020 20-Ounce Stainless-Steel Milk Frothing Pitcher as this is *just* the right size to steam milk for 1-2 large (16oz) lattes and has a great handle that keeps fingers away from the heated stainless steel. I would also recommend the Rattleware 5-Ounce Brew Pitcher, which is just the right size to fit under the espresso spouts. I make a long shot of espresso which fills the pitcher from a double-shot amount of espresso (or two single-shot pods). This is the advantage of using a machine that does not have an automatic cutoff for the water-flow: you can make your coffee how you like it (the standard double-shot is only 2oz I make nearer 4oz, which still has a real kick that you don't find in filtered coffee, yet is not at all bitter).

The RSVP Terry's Tamper is just the right size for this espresso filter and tamps the coffee much better than the (rather fragile) plastic tamper that comes with the machine. I have just about perfected the "press-and-turn" tamping technique to get the coffee tightly-compressed in the filter, using this tamper.

The only slight drawback with this machine is that you have to wait for the milk steamer to warm up, after you've made your espresso, as it only has a single heater. Most of the machines in this price range are like this it is not a big deal. You press the steamer button and wait for it to light up (takes about 1-2 minutes, max). If you leave the coffee in a little brew jug under the spout, it is kept warm by the metal plate underneath, which was already heated by the initial warmup process. I have made espresso for 4 people with this machine in the same run and each came out beautifully. The water reservoir holds 35oz, which is enough for more coffee and steam than I am likely to need ...

I have not had any problem with turning the filter holder unless I really overfilled the espresso filter basket it can be quite tight if you get too ambitious with the amount of coffee you can pack in there! I agree with the reviewer who observed that the machine is not as heavy as it looks and you have to hold onto the top of the machine, as you insert the filter holder. But at least this makes it easy to carry.

Overall the machine is really easy to use and to clean. The espresso filter holder is nicely designed with a flip-up arm that allows you to knock the grounds out easily. I have made way more coffee with this machine than I expected, because it is so good and so easy. I thought that this would be a weekend indulgence and was afraid that I might not use it enough to justify the cost. In fact, I make espresso every morning and I don't know how I lived without it for so long!

Click Here For Most Helpful Customer Reviews >>

We had high hopes for this machine, and it was well reviewed and very reasonably priced. The first time we filled the water reservoir a few minutes later we were stepping in water (oh, it leaks.) We cleaned up, filled it up again, and this time carefully ensured it was seated properly. Then we waited. Yep, it leaked again.

After a couple of additional attempts (push it firmly in, gently rest it in place) I decided to turn on the machine...maybe running a cycle or two would fix things. As it warmed up, water started leaking out of the steam nozzle! (first time it was ever used) followed by leaking from the water reservoir.

The manual says nothing about troubleshooting leaks. I think we got a dud, and I'm very disappointed.

Best Deals on DeLonghi EC270 15-Bar-Pump Espresso Machine, Black and Stainless

This machine is nicely heavy and strong, normally with every pump espresso machine you have to wait like 5 minutes or more to let it warm up, well this one is ready in seconds, the pump is not noisy at all, the steamer works very nice mixing perfectly the milk with the steam without making boiling the milk before you get a firm foam and that is a good advantage because you can froth directly into your cup instead of using frothing pitcher (less clean to do), the water reservoir can be remove to fill it or it has a lid too, and it comes with two kinds of filters one to use with ground coffee for 2 cups, and another one that can be use with ground coffee for 1 cup or with E.S.E pods( which although they are bit expensive, once you use them you love them cause they are super practical) and at last but not least the fact that this has stainless-steel boiler is a plus since all the small espressos use aluminum which is not that healthy. In general it is very easy to use and to clean machine.

Honest reviews on DeLonghi EC270 15-Bar-Pump Espresso Machine, Black and Stainless

I am somewhat of an aged coffee drinker, I admit. I have had years where I would go to work and consume maybe 15 6 oz. cups of coffee. Even now, I don't have a problem drinking a triple or quad shot latte. I just have a hard time watching the money flow out of my wallet when I frequent the espresso stands. But I do like a tasty cup of java. I know what I like and I'll likely pay for it if I have to buy coffee at an espresso stand, but I won't be buying any $200+ machines for home use any time soon. Nor any expensive burr grinders or $30 tampers. And no ESE pods. I want the coffee experience. Coffee pods are made for those who want automatic machines and that is NOT what I want out of a coffee making machine experience. That being said, I did some research to upgrade my current 20+ year old Krups espresso/latte maker (hardly any crema and way too much airy foam in the milk). I found the DeLonghi EC-270 on sale and specifically researched it for comments. Yes I have read all the reviews here on Amazon and I'm honestly scratching my head in wonder. Are we all talking about the same machine? I am absolutely IN LOVE with this unit and have been since I opened the box. It has a small footprint compared to many of the higher priced ones, It is manually operated, which I want....I like the experience of being my own barista, I do not want an automatic machine where you push a button for a latte and out comes your complete drink. I don't want a grinder added to my machine, I'll do that on my own. I just want an honest machine that will consistently pour(or pull or steam) a great cup of espresso or cappucino or latte. This one does it with 3 buttons and one twist knob. One button turns the machine on to warm up the water, one button selects the coffee route for the heated water and the third button selects the steamer route for the heated water. Push the button for coffee and within 25 to 40 seconds you can have up to 2 shots of great looking espresso with a generous dose of crema on top. Push the steamer button and the steam wand is ready for action in moments (not minutes). Once that button lights up you turn the knob on the side of the machine and put a small pitcher of milk under the steamer and steam it for up to 60 seconds. Add steamed milk to pulled shots of espresso and enjoy. And all this was possible after only one or two times through the process to get it understood and somewhat mastered (although I like to think I am still mastering the art of a great latte).

I haven't had any problems with leaking water tanks, no problems with the filter holder, no problems with long waits for the water to heat up, and no problem putting the pitcher underneath the frother/steamer. I DID read the manual before I started making the coffee and I did keep in mind all the problems some others seem to have had with this unit. I have had none of them. Now, for some history: with my old twenty plus year old unit, I would make about 4 lattes a week. With this new unit, I like the lattes I am making so much more that I am making roughly 15 to 20 a week! I don't mind a little clean up afterwards...I knew that came with the territory since I had an older machine, but it seems my cleanup time is a bit less than before. But for sure I can claim that my cups of coffee now are WAY better than before without changing the grinder or the coffee beans or the type of milk (I use non-fat milk almost exclusively). And I AM using a blade coffee grinder, not a burr grinder. I just make sure that I am grinding until all the ground coffee is as close to espresso grind as possible. I just can't afford to buy a good burr grinder (and I have looked into them, I understand their benefits). I am satisfied with the results I obtain with my 15+ year old coffee bean grinder. The crema the DeLonghi can produce is easily 3 times what I got out of my old Krups unit, and the shots are being pulled out within 25 to 30 seconds. Yes, I spend a bit of time tamping down the grinds so that the filter holder will yield great results within the expected time frame. And yes, I am using the plastic tamper the comes with the machine.

What I do not do is remove the water tank every time I want to fill it up. I simply use the pitcher that will hold milk and fill it with water first and pour it into the water tank. I am thinking that the fewer times I remove the tank, the less damage I am doing to the seal at the tank base. Eventually I realize that I will have to do periodic cleaning of the tank and other parts of the machine but I can handle that. I am relating all this to put into perspective all the comments others have made. Bottom line, I love this machine and I can barely let it sit still for 24 hours without feeling compelled to make myself another coffee drink for me or my wife. We both absolutely LOVE the results....a great cup of coffee. I have had ZERO problems with this machine and only many positive remarks from family and friends when they drink the results from the EC-270. I hope this review dispels some of the misconceptions associated with some of these other DeLonghi EC-270 reviews.

As a final comment, I acquired mine on sale and with a rebate that definitely put the total under $100. That's less than half of what my old Krups cost brand new. You should seriously consider this machine if you like involving yourself with the 'barista' experience and love the results of what you can produce. I end up talking about this machine to others almost every day. I LOVE IT!!

Find helpful customer reviews and review ratings for DeLonghi EC270 15-Bar-Pump Espresso Machine, Black and Stainless

When I got this espresso machine (birthday present) I was very excited because I have the EC155 at work and I'm very pleased with that model (5 out of 5 stars). I was very dismayed when I read the reviews about this (the EC270) machine and learned about the leaky water tank problem. Here are my findings so far:

PROS:

1. This machine DOES make a really good cup of espresso.

2. It's a very pretty machine.

3. It's not overly expensive.

CONS:

1. It has no holder for the "other" filter that isn't being used the EC155 has a holder under the lid for storing the other filter which is quite convenient.

2. It's VERY noisy, much noisier than the EC155.

3. The filter starts dripping as soon as I turn on the machine, and continues to drip LONG after I make an espresso. Some dripping is understandable since the grounds hold some liquid, but this machine drips out as much as 3 ounces of liquid AFTER turning off the pump; that seems really excessive to me (the EC155 drips very little after making a cup and never before).

4. After having it for less than two weeks, and using it 2-5 times per day, mysterious puddles have begun to appear beneath the machine which I have traced back to, you guessed it, a leaking water tank.

5. The drip tray is pretty awkward to remove and the "level indicator" is useless: If you let the drip tray get full enough for the indicator to be seen then you're going to spill when you remove the tray.

6. Poor value: It does make great espresso, but so does the EC155 and it is cheaper, it doesn't leak, it's quieter, etc.

It's almost as if the EC270 and the EC155 were made by two different companies. Apparently the EC155 is made in Italy (Amazon.com description) while the EC270 is made in China (bottom of machine). That could have something to do with it.

The warranty states that they will either repair it or replace a defective machine but the purchaser has to pay shipping to ship it back. For a $130.00 machine, is it worth it to go through all that trouble?

I expect that eventually I'll get fed up, throw it in the garbage, and buy the EC155 for $80.

Buy Fom Amazon Now

Sunday, December 29, 2013

Buy Dimplex DFOP25 25-Inch OptiMyst Electric Fireplace Insert

Dimplex DFOP25 25-Inch OptiMyst Electric Fireplace Insert
Customer Ratings: 5 stars
List Price: $2,430.00
Sale Price: $1,599.00
Today's Bonus: 34% Off
Buy Now

I have no affiliation with any builder, manufacturer, or any company involved with this product. I am just a homeowner doing a remodeling project that wanted a Fake Fireplace. You really should check this out on You Tube, It is really great, you should see it.

I found this Faux Fireplace because I was remodeling my home. I grew up with a real wood burning fireplace with a Mantel, and loved it. Burn when I got married, our home had no real fireplace, so for 20 years I have done without. My Roaring Fire Fix was getting a Cabin in the Winter for a long weekend and having a fire. Well, that was okay, but I always missed the Winter Fireplace at Home growing up. Last Year we decided to build our Dream Home. We decided to modify our Family room into a Home Theatre, and I wanted a fireplace too.

So, . . . How do I get a Fireplace in a room with a Big Screen TV and all the equipment. You have to worry about producing Heat, and my wife always commented on our weekend getaways about it getting too Warm, so I looked around. My criteria were: 1) a VERY Realistic Fire effect; 2) Little or No heat production. I did not want a cheesy color wheel and plastic flames!

I came across the Dimplex OptiMyst Electric Fireplaces. I checked them out on You Tube, and was impressed. The Fire Effect is VERY Realistic. The Effect is generated by water vapor and lighting, so the effect is random, and the only heat is from the light bulbs. You actually can reach right into the "Flame" and all you will feel is warm moist air. So, . . . Realistic, CHECK! Little or No Heat Production, CHECK! AND, is DOES HAVE a HEATER if you want to turn it on.

Because I was having a Mantel created I opted for the Fireplace Insert, rather than a whole Fireplace including Mantel, (which Dimplex also sells). A word of Caution, Dimplex also makes other kinds of Faux Fireplaces, so be careful if you order, because they do not all use the same process as the Optymyst Line.

With the Fireplace effect on, but no Heat on, the room does become a more humid, but I was testing it in April, (I just couldn't wait any longer for my Remodel to be done.) so the Moist Spring Air may have been a factor, versus the typically Dry Winter air we have in Ohio. My Audio Video guy warned that using this Fireplace under a Big Screen TV could void the warranty by risking heat damage from the Heater, and Moisture Damage from the Humidity, so know your risks, and use good judgement on use and placement. I don't plan to use the heater, and do plan to use a circulating ceiling fan in the room to try to disburse the humidity thru the room.

A last few comments. The Fireplace is rated low on the energy cost scale, but I have not had it run but a couple hours, so I can't say how accurate that would be with or without heater on. Also, USE ONLY FILTERED TAP WATER to keep the System in good working order, and do not leave water in the tank for weeks at a time, (Dimplex warns this, I don't know why, but at these prices why take a chance). I found it very easy to remove the mechanism and drain. I tried to view this in a showroom in Ohio, but did not find it in the store, I called first, and suggest you save the driving and call to verify they have them on display. You Tube has several store in the States showing them, so other areas may have them available to check out.

Click Here For Most Helpful Customer Reviews >>

After searching for an electric fireplace for my bedroom and only finding very fake looking ones, I happened upon a video on youtube for the Dimplex Optimyst. What an amazing electric fireplace. I can't believe how realistic the flames look in real life and it puts out optional heat too! The only bummer is that it does not include a sound box to create that realistic fire sound of hissing and popping like a real fire does but you hardly miss it. The seller shipped it very fast and in perfect condition.

Best Deals on Dimplex DFOP25 25-Inch OptiMyst Electric Fireplace Insert

I've decided to add this fireplace to my casa. Everyone that checks it out says that it's amazing. The flames are great and have a controllable height and the heater works just as intended. I recommend this to anyone who is looking to go electric, even though it's way more expensive than many other brands you will easily forget that its electric as soon as you plug it in.

The cons for this item are that it is basically sheet metal so you may have to tweek it for that "custom" fit depending on the size of area you have available. Lastly, the light from the center flame tends to bleed through and you'll see an "ambient" orange line on your ceiling.

Great product though, highly recommended.

Buy Fom Amazon Now

Sunday, December 8, 2013

Masterbuilt 20010610 Indoor Electric Fish Fryer Review

Masterbuilt  20010610 Indoor Electric Fish Fryer
Customer Ratings: 4.5 stars
List Price: $139.00
Sale Price: $107.00
Today's Bonus: 23% Off
Buy Now

Used this to fry a bunch of fish, oysters, shrimp, and homemade fries. The capacity is great and the ability to maintain temperatures makes frying fast. I finished the food so quickly, the rest of the meal was not ready. Although some have criticized the magnetic cord, I had no problems. The lift out element and oil pan made cleanup a breeze. My peanut oil was in god condition for reuse. I did use the fryer on my screened porch so I cannot say whether the house would have smelled of frying if I had used it inside. It is large but is not very heavy so setting it up on the porch was easy.

Click Here For Most Helpful Customer Reviews >>

This fryer was easy to set up. I had no problem with the cord. I fried chicken it the fryer and it came out real good. It was easy to clean up when I was finished with it. I had no problem in draining my oil into a strainer reuses.

Best Deals on Masterbuilt 20010610 Indoor Electric Fish Fryer

This fryer is easy to clean. Heats up quick. Easy to store, move, and set up. We love it.

We plan on using this fryer at our lake cabin. You will be well satisfied with its performance.

Honest reviews on Masterbuilt 20010610 Indoor Electric Fish Fryer

I bought this fryer because of the fantastic reviews... and, it fell short.

First, the lid is not sealed at all, so, despite the filter on top, your house is going to stink.

Second, the fryer doesn't get hot enough. Heck, it doesn't even get as hot as it says it does. Testing with a thermometer, the oil would only get within about 15 degrees of what the dial was set to. 375 degrees is the max temperature, which really isn't hot enough for great french fries. Chicken fingers, etc are fantastic, though.

Third, it's kind of janky the sheet metal on the sides is flimsy, the control unit doesn't sit straight on the corner of the unit despite being inserted correctly, the basket sits DIRECTLY on the heating element when it's submerged, etc. I'm not sure how this fryer got so many good reviews, but it certainly wasn't because anyone had compared this fryer with anything else.

It's a shame, as I really did want to like it, but it falls short of my expectations in what is a relatively expensive fryer.

Find helpful customer reviews and review ratings for Masterbuilt 20010610 Indoor Electric Fish Fryer

This is THE BEST FRYER you will ever own. I've owned it now for a year and have been beyond satisfied. Bought it for fish but use it for everything; fries, chicken, crab balls, etc. Comes completely apart for cleaning (even the lid comes off for easy cleaning). Not too big for the counter but big enough to get the job done. I absolutely love it and would highly recommend it.

Buy Fom Amazon Now

Friday, November 8, 2013

Discount DuraHeat DFA70T 70,000-BTU Kerosene Portable Forced-Air Heater

DuraHeat DFA70T 70,000-BTU Kerosene Portable Forced-Air Heater with Thermostat
Customer Ratings: 5 stars
List Price: $249.00
Sale Price: $226.11
Today's Bonus: 9% Off
Buy Now

It has run flawlessly since receiving it.Well made product made in S Korea not China for a change.Thermostat runs perfect at 70* but not as well at 60.Would have liked the therm.at 5 degree increments instead of 10 degree.I would highly recommend this unit !!!!!

Click Here For Most Helpful Customer Reviews >>

I have a very large garage. It's 13 feet high, 20'x40'. The heater uses quite a bit of fuel per hour, but only has to run for 20 minutes to warm the entire garage to a good working temp. And the garage stays warm for about 1 1/2 to 2 hours after I shut it off. So, for an average of $3.00 to $5.00 per hour I can have my garage back. I could not even use my garage for about 4 months of the year due to extreme cold. Now I don't have any excuse to not get work done all year long. Fast delivery too!

Buy Fom Amazon Now