Showing posts with label thermostat line voltage. Show all posts
Showing posts with label thermostat line voltage. Show all posts
Thursday, December 25, 2014
Skytech 3301PF Fireplace Remote with Thermostat and Fan Control Reviews
I needed to replace an old wireless remote for my gas fireplace so I went to dealer where I purchased the product and had it installed. They were really no help in getting a replacement, so I went on line and found Amazon had a lot of choices. I was surprised at all the options Skytech offered and at a reasonable price. I actually improved the performance over my old wireless remote and installed the replacement remote in about 30 minutes.
Tuesday, December 16, 2014
Buy Holmes HCH4051-UM Compact Ceramic Heater with Manual Thermostat
Customer Ratings: 
List Price: $26.99
Sale Price: $24.99
Today's Bonus: 7% Off

Our gas bill for heating our trailer was $300 a month, here in Wisconsin for the last 3 months. We bought TWO of these (only two!) and turned our gas furnace's thermostat down to 50 and then put one of them in the back and one in the front of the place. I don't know why people are saying the heating area is small? Maybe the fan isn't blowing much, but the two little heaters we got have actually kept our WHOLE place around 70 degrees.
Okay so yeah, I guess there was a smell when we first turned them on, but that quickly went away.
For as little as they cost I'd have to say they are definitely worth the buy. The cost in electricity is STILL far less than what we were paying for our gas bill.
I have pics if anyone would like to see the melted plastic on the heater.
When I received the heater, it was already broken. It had been packed in the corner of a box, with padding only on the internal sides, and it had apparently fallen hard during shipping; therefore, the fan motor was torn from its plastic mount. The motor mounting screws were tight, but they held on only to broken pieces of the housing. Send it back for repair? That would require more in time, trouble, and shipping than the heater cost in the first place. Instead, I took the heater apart and cemented the broken plastic back together with Loctite Plastic Bonder, a specialized super glue with primer, which I will watch to confirm that it gives a permanent bond. For the immediate future, I won't leave the heater running when I'm not in the room.
Some people have complained about the heater causing a smell. I don't see why this would happen, unless something was broken or jarred in shipment, causing wires or plastic from the case to be moved into the heat stream or to touch hot parts. When the heater is properly together, it seems to be a little gem, with its simple and economical design seeming more of an engineering victory than a liability. It takes the chill off my basement TV room nicely, the heat path is clean, the fan sound is barely noticeable, and the plastic case warms only mildly, very touchably, in a few places. My thirty year old soldering iron has a stronger smell when it heats up, and that is very mild.
If you receive this heater with all its parts in the right places, or you can get them there, then you may well appreciate this straightforward device. Once you have it, there seems no reason that much would go wrong, or that repair would be difficult, or that, in the worst case, a replacement would be unaffordable. Unfortunately, shipping may be the high moment of risk in the life cycle of this product.
List Price: $26.99
Sale Price: $24.99
Today's Bonus: 7% Off
Our gas bill for heating our trailer was $300 a month, here in Wisconsin for the last 3 months. We bought TWO of these (only two!) and turned our gas furnace's thermostat down to 50 and then put one of them in the back and one in the front of the place. I don't know why people are saying the heating area is small? Maybe the fan isn't blowing much, but the two little heaters we got have actually kept our WHOLE place around 70 degrees.
Okay so yeah, I guess there was a smell when we first turned them on, but that quickly went away.
For as little as they cost I'd have to say they are definitely worth the buy. The cost in electricity is STILL far less than what we were paying for our gas bill.
Click Here For Most Helpful Customer Reviews >>
I recently discovered the source of the smell. The plastic nearest to the ceramic element is melting. This is not quality work and now is a potential source of a fire. I am currently holding on to it waiting for a recall.I have pics if anyone would like to see the melted plastic on the heater.
Best Deals on Holmes HCH4051-UM Compact Ceramic Heater with Manual Thermostat
I returned the HCH4051 I got to go under my desk. It was a handy size, and I could probably have dealt with the rather high noise level, but I couldn't handle the smell! Even after running it full-bore for HOURS outside, it still gave off a nasty chemical odor. It smelled like pesticide, like 2,4-D or something. That was unacceptable.Honest reviews on Holmes HCH4051-UM Compact Ceramic Heater with Manual Thermostat
I bought this from Home Depot for $12.59. I was mainly curious what kind of heat I could get out of a machine that was less that $13. With the fan set on high, and the temp. at max, this unit heats up about 1' directly in front of the fan, and about 1-2' directly above it. So, unless you just want to set it on the floor and warm up your feet, I would say use that $13 and put it towards another heater........I will be returning it tomorrow. Hopefully this will save some people some trouble and now you know what to expect.Find helpful customer reviews and review ratings for Holmes HCH4051-UM Compact Ceramic Heater with Manual Thermostat
I like this little heater, but I would recommend that customers be alert about some things. It is inexpensive and very compact and lightweight, yet it is a remarkable little space heater. One possible initial concern is that it is fairly fragile. If you are a little handy, it is a simple device that you can probably deal with easily, should a need arise, but if you are not at all handy, then be somewhat cautious.When I received the heater, it was already broken. It had been packed in the corner of a box, with padding only on the internal sides, and it had apparently fallen hard during shipping; therefore, the fan motor was torn from its plastic mount. The motor mounting screws were tight, but they held on only to broken pieces of the housing. Send it back for repair? That would require more in time, trouble, and shipping than the heater cost in the first place. Instead, I took the heater apart and cemented the broken plastic back together with Loctite Plastic Bonder, a specialized super glue with primer, which I will watch to confirm that it gives a permanent bond. For the immediate future, I won't leave the heater running when I'm not in the room.
Some people have complained about the heater causing a smell. I don't see why this would happen, unless something was broken or jarred in shipment, causing wires or plastic from the case to be moved into the heat stream or to touch hot parts. When the heater is properly together, it seems to be a little gem, with its simple and economical design seeming more of an engineering victory than a liability. It takes the chill off my basement TV room nicely, the heat path is clean, the fan sound is barely noticeable, and the plastic case warms only mildly, very touchably, in a few places. My thirty year old soldering iron has a stronger smell when it heats up, and that is very mild.
If you receive this heater with all its parts in the right places, or you can get them there, then you may well appreciate this straightforward device. Once you have it, there seems no reason that much would go wrong, or that repair would be difficult, or that, in the worst case, a replacement would be unaffordable. Unfortunately, shipping may be the high moment of risk in the life cycle of this product.
Monday, November 3, 2014
Discount Pelonis 1,500-watt Portable Electric Oil-filled Radiant Heater
works well
keeps bedroom warm at night so
we dont need to run the furnace heating the whole house
radiant heaters need to be near a wall
preferably where a window lets cold air in
they heat the air and it curculates up and around the room
they do not radiate out next to you so dont put them in the middle of the room like a ceramic space heater with a fan
ours worked well but is now not heating as much
still working though
will try on medium setting instead of low
getting two more at home depot on sale
dont get fooled by the bad reviews by people who dont know how to use a radiant heater
but dont overlook the ones that said they had failures of switches or leaks etc
failures should be rare but do happen with any product
stupid users should be rare but are all too frequent
I am pretty accepting of the fact that there was typically a consistent 20 degree increase in temperature, but now that mine has stopped working completely, I'm not such a big fan of this giant thing just taking up space in my room. I'm almost 100% sure that the problem is a faulty dial/knob. When I first started having issues with this knob was when for some weird reason it wouldn't turn on high anymore... only med and low. Then it stopped turning on when I turned it to med, only working on low. Then the orange "on" light started blinking when I would turn it on any setting, but not actually stay on. So now no light turns on and neither does its heating functions.
I got this thing less than 60 days ago by the way......
I've used the same one by duraflame and it also was not such a great experience either. Every 15-20 min, it made some weird creaking noise that got very old, very fast.
keeps bedroom warm at night so
we dont need to run the furnace heating the whole house
radiant heaters need to be near a wall
preferably where a window lets cold air in
they heat the air and it curculates up and around the room
they do not radiate out next to you so dont put them in the middle of the room like a ceramic space heater with a fan
ours worked well but is now not heating as much
still working though
will try on medium setting instead of low
getting two more at home depot on sale
dont get fooled by the bad reviews by people who dont know how to use a radiant heater
but dont overlook the ones that said they had failures of switches or leaks etc
failures should be rare but do happen with any product
stupid users should be rare but are all too frequent
Click Here For Most Helpful Customer Reviews >>
I bought this heater to warm a small one bedroom (barely insulated) home and it did well when the temperatures outside ranged from 40-55 degrees but when it got into the teens and 20s outside, this thing could not compete. Typically I find that it raises the inside temperature about 17-21 degrees above the outside temp. When it was in the teens and twenties, I was only seeing about a 15 degree increase, on high all of the time.I am pretty accepting of the fact that there was typically a consistent 20 degree increase in temperature, but now that mine has stopped working completely, I'm not such a big fan of this giant thing just taking up space in my room. I'm almost 100% sure that the problem is a faulty dial/knob. When I first started having issues with this knob was when for some weird reason it wouldn't turn on high anymore... only med and low. Then it stopped turning on when I turned it to med, only working on low. Then the orange "on" light started blinking when I would turn it on any setting, but not actually stay on. So now no light turns on and neither does its heating functions.
I got this thing less than 60 days ago by the way......
I've used the same one by duraflame and it also was not such a great experience either. Every 15-20 min, it made some weird creaking noise that got very old, very fast.
Best Deals on Pelonis 1,500-watt Portable Electric Oil-filled Radiant Heater
After much research and review of various heaters I came to the conclusion that this one would work great and it did. We have an old Lakewood 7101 that still works great but wanted another oil-filled radiant heater for another room. We purchased a Pelonis 1,500 watt oil-filled radiant heater and could not be happier. It works great and we especially like the thermostat that works and keeps the rooms the right temperature. There is no oil smell at all with this unit. Having it on wheels makes it easy to move around on hard wood floors. BTW, you do not need to keep the unit next to a wall as it works just fine 2-3 feet away from the wall. I don't know how long it will last but am very satisfied with the unit thus far.Honest reviews on Pelonis 1,500-watt Portable Electric Oil-filled Radiant Heater
My delonghi floor heater quit working after about 10 years so I went to home depot to buy another affordable one. I ended up picking the pelonis because it was on sale. The first thing I noticed was the pungent odor it gave off so I didn't really want it in my bedroom where the air would be enclosed so I used it as the kitchen heater. Then, after a few weeks the plug melted so I replaced that. After a couple months the smell went away but then I started noticing burn marks on the outer surface of the metal from it running at a high temperature day in and day out. The metal began to warp so that I couldn't roll it properly either. Finally, after owning it for a total of 4 months it burnt out. I really wish I would have saved my money for something else.Find helpful customer reviews and review ratings for Pelonis 1,500-watt Portable Electric Oil-filled Radiant Heater
We got rid of our old oil furnace, which no longer worked. We put one of the Pelonis in each room. We were disappointed at first. Then I realized it had nothing to do with how hot it got, but the circulation of the heat. So I put a small fan behind each one and set them to a very low blow setting. This gently circulated the heat around the room. We are very happy with this system of heating.Sunday, November 2, 2014
Discount Deni 9700 Electric 5-Quart Pressure Cooker
After less than two years this unit broke down. Repeated heating and cooling caused the plastic pressure valve to break and I can't find a replacement so I have downgraded my review from 3 to 2 stars. The following represents an earlier opinion:
"After over five years of service my Farberware electric pressure cooker finaly broke down. The electrical conection to the heating unit (cooking pot) was not well reinforced and (as the cast aluminum pot was heavy) it finally broke.
The Deni fixes this problem with a completely different design with no stress being put on electrical connections lifting the pot out of the unit.
However, I still prefer the Farberware unit and would choose it over the Deni. When using the cooker in pressure cook mode the seal does not always operate correctly. This can cause the food to cook indefinitely without ever reaching pressure. The timer does not shut the unit down after the food has been cooked but turns it to warm. Food can continue to slowly cook for hours. This is aggravated by a timer beep that is hard to hear.
Further, the unit was advertised as stainless steel but it appears to me that the cook pot is aluminum. This is something of a concern as teflon linings wear out and there is a reported link between aluminum and Alzheimers.
I've used a pressure cooker for many years and swear by them. This unit is satisfactory but I wish for the cost they'd put just a little more thought into the design."
It counts down and shuts off on it's own. I like the quick release valve too.
"After over five years of service my Farberware electric pressure cooker finaly broke down. The electrical conection to the heating unit (cooking pot) was not well reinforced and (as the cast aluminum pot was heavy) it finally broke.
The Deni fixes this problem with a completely different design with no stress being put on electrical connections lifting the pot out of the unit.
However, I still prefer the Farberware unit and would choose it over the Deni. When using the cooker in pressure cook mode the seal does not always operate correctly. This can cause the food to cook indefinitely without ever reaching pressure. The timer does not shut the unit down after the food has been cooked but turns it to warm. Food can continue to slowly cook for hours. This is aggravated by a timer beep that is hard to hear.
Further, the unit was advertised as stainless steel but it appears to me that the cook pot is aluminum. This is something of a concern as teflon linings wear out and there is a reported link between aluminum and Alzheimers.
I've used a pressure cooker for many years and swear by them. This unit is satisfactory but I wish for the cost they'd put just a little more thought into the design."
Click Here For Most Helpful Customer Reviews >>
I purchased the Deni appliance and LOVED it. Then it broke after a few months of use. I would set the timer to say 40 min and skip off to take care of other things and when I would return to check on it, the timer still said 40 minutes! A couple of times I didn't release the pressure in time to prevent the food from thoroughly burning. SO I sent it back at a cost of $20 in postage. Six weeks later, Deni sent a replacement. THIS ONE NEVER WORKED!!! The replacement had a defective electronic keypad that makes no noise when you push the buttons and doesn't count down or shut off. The food will burn every time unless I set my oven timer and check on my own to see its progress. For as much as I paid, I'm not willing to do that. The second one is going back too.Best Deals on Deni 9700 Electric 5-Quart Pressure Cooker
I love this pot ! I cook a lot of Ethnic dishes, where this pot comes in handy in pre-cooking many meats, 'rooty' veggies, legumes etc. I also use it as a 'regular' pot with another lid, simply because it is big and not extremely heavy to handle. It is electric, saving me a stove burner when I have to cook several things at the same time. Generally, I am very satisfied with the DENI products I own.Honest reviews on Deni 9700 Electric 5-Quart Pressure Cooker
The electric pressure cooker is the way to go. Having had the non electric for many years, I find that the electric model is pretty much hands off once you set it to cook.It counts down and shuts off on it's own. I like the quick release valve too.
Find helpful customer reviews and review ratings for Deni 9700 Electric 5-Quart Pressure Cooker
This is a perfect item for reducing cooking time for most foods, especially brown rice!Thursday, October 2, 2014
Hydrofarm MTPRTC Digital Thermostat For Heat Mats Reviews
Customer Ratings: 
List Price: $39.95
Sale Price: $34.12
Today's Bonus: 15% Off

Works like a charm.
Connect the Heat Mat monitor's power cord into the wall, then connect the seedling heat mat's power cord into the monitor.
To set the degrees is very easy. Hold down the button "SET" until the numbers are blinking. Then using the up and down arrows, set the desired temperature then press the "SET" button again to stop the blinking. Also press down the "UP" button for 6 seconds for readings in Fahrenheit or hold down the "DOWN" button for 6 seconds for readings in Celsius.
There is a little wire with a plastic white tip that hangs from the monitor.
Push the white part into the soil for temperature reading.(Once temperature is set, do not be alarmed when your heat mat reaches its maximum temperature you set it to then the Heat Mat monitor temperature will go up and down 3 degrees to prevent over heating)
This is very helpful for starting seeds.
A few things some people would like to know:
These are set it and forget it thermostats. You put in the maximum temp (i.e, 90 or 92) degrees and this thermostat will automatically kick on if the temp gets 2 degrees less (88 or 90 degrees respectively). This means you are not going to get too much variation in the warm spot hide which is a great thing but you CAN NOT change this variance. I don't see a real reason you need to though.
The probe cables are perfect length and since they are designed for soil applications, they can be buried in substrate. They also have a suction cup if you need to monitor ambient air instead.
TIP: Though some people say you should bury the probe and it should make have DIRECT contact with the UTH, I tried this out and I didn't like it. I am more concerned with the overall micro-climate in the hide or on the surface of the substrate so I just let it lay level with the substrate. That way, if the snake is colder than usual, they will coil in the hide and will give the thermostats a reading that is cooler than the actual temperature. This means the UTH will kick on a little longer than normal and warm the snake back up to a nice temperature.
These thermostats are very heavy duty and can handle a large electrical load (1000 watts). Since most undertank heaters are 24 watts or less, you can definitely use this stat with multiple tank heaters. It has a three-prong connector on it and heavy-duty power cords/connectors.
There isn't a reason you can't use this with visible light heaters but I would imagine it would be annoying to have the constant on/off. Use it with ceramic heaters or heat tamp instead. For the visible light heaters, use a dimmer or proportional thermostat. The same goes for incubators. Get a proportional thermostat for your incub.
PS. Gave it 4/5 stars because it's not a proportional thermostat, but for the money you know what you're getting! Definitely recommend!!!
I would reccomend this thermometer to anyone that wants to sprout seeds. Your mat will not overheat your seeds this way and you don't have to sit and monitor your seeds all day and night... just set and forget. ;)
By the way you should see how many seeds I sprouted on my first attempt useing this thing... gonna have a HUGE garden full of alll kinds of herbs... Parsley, Oregano, Tomatos, Cilantro, Asperagus, etc. I have tons of seeds my first time out sprouting and growing at an incredible rate now. :D
List Price: $39.95
Sale Price: $34.12
Today's Bonus: 15% Off
Works like a charm.
Connect the Heat Mat monitor's power cord into the wall, then connect the seedling heat mat's power cord into the monitor.
To set the degrees is very easy. Hold down the button "SET" until the numbers are blinking. Then using the up and down arrows, set the desired temperature then press the "SET" button again to stop the blinking. Also press down the "UP" button for 6 seconds for readings in Fahrenheit or hold down the "DOWN" button for 6 seconds for readings in Celsius.
There is a little wire with a plastic white tip that hangs from the monitor.
Push the white part into the soil for temperature reading.(Once temperature is set, do not be alarmed when your heat mat reaches its maximum temperature you set it to then the Heat Mat monitor temperature will go up and down 3 degrees to prevent over heating)
This is very helpful for starting seeds.
Click Here For Most Helpful Customer Reviews >>
I am using this mat to keep a constant temperature on my Kombucha brew. Using a standard heating pad, this theromstat does the job. I'm very pleased with it. I can keep the temperature at 79 degrees and not have to have a heating pad constantly on. Keep the suction cup clean so it doesn't pop off the glass and a thermometer handy to monitor the temperature.Best Deals on Hydrofarm MTPRTC Digital Thermostat For Heat Mats
Just like a few other reviewers on here, I bought these for my under tank heaters on my two python tanks. They are very, very effective at regulating the temperatures accurately. I compare the temps on this product with my digital thermometers and they work great.A few things some people would like to know:
These are set it and forget it thermostats. You put in the maximum temp (i.e, 90 or 92) degrees and this thermostat will automatically kick on if the temp gets 2 degrees less (88 or 90 degrees respectively). This means you are not going to get too much variation in the warm spot hide which is a great thing but you CAN NOT change this variance. I don't see a real reason you need to though.
The probe cables are perfect length and since they are designed for soil applications, they can be buried in substrate. They also have a suction cup if you need to monitor ambient air instead.
TIP: Though some people say you should bury the probe and it should make have DIRECT contact with the UTH, I tried this out and I didn't like it. I am more concerned with the overall micro-climate in the hide or on the surface of the substrate so I just let it lay level with the substrate. That way, if the snake is colder than usual, they will coil in the hide and will give the thermostats a reading that is cooler than the actual temperature. This means the UTH will kick on a little longer than normal and warm the snake back up to a nice temperature.
These thermostats are very heavy duty and can handle a large electrical load (1000 watts). Since most undertank heaters are 24 watts or less, you can definitely use this stat with multiple tank heaters. It has a three-prong connector on it and heavy-duty power cords/connectors.
There isn't a reason you can't use this with visible light heaters but I would imagine it would be annoying to have the constant on/off. Use it with ceramic heaters or heat tamp instead. For the visible light heaters, use a dimmer or proportional thermostat. The same goes for incubators. Get a proportional thermostat for your incub.
PS. Gave it 4/5 stars because it's not a proportional thermostat, but for the money you know what you're getting! Definitely recommend!!!
Honest reviews on Hydrofarm MTPRTC Digital Thermostat For Heat Mats
This was just what I needed to keep my seed soil at a proper warmth to promote growth. When used in conhuction of a seedling heating pad, it makes growing from seeds a snap. It was easily set-up and easy to adjust as I added different types of seeds. It kept the seeding tray at a constant 81-86 degrees until my peppers had sprouted. Later it kept it at around 75 degrees. The click it makes when coming on and turning off is quiet and no disturbing to the conversation.Find helpful customer reviews and review ratings for Hydrofarm MTPRTC Digital Thermostat For Heat Mats
This thermostat works great and turned a poor farmer like me into a succesful grower so far. I set the thermostat 2oF above what I wanted it and when the temp drops to where I want it, it kicks the heat mat in to keep seedlings at or 2oF above my temp range desired. VERY easy to set and use and can be set at any temp a plant seed would like to sprout at. :DI would reccomend this thermometer to anyone that wants to sprout seeds. Your mat will not overheat your seeds this way and you don't have to sit and monitor your seeds all day and night... just set and forget. ;)
By the way you should see how many seeds I sprouted on my first attempt useing this thing... gonna have a HUGE garden full of alll kinds of herbs... Parsley, Oregano, Tomatos, Cilantro, Asperagus, etc. I have tons of seeds my first time out sprouting and growing at an incredible rate now. :D
Reviews of Smart Temp TX500E Programmable Thermostat
We own a two-story house with separate heating zones for upstairs and downstairs. We bought a LUX 500 SmartTemp thermostat for the first floor, so the heat can come on automatically in the morning. In the past, I had to go downstairs, turn up the thermostat (the traditional round Honeywell control), then go back upstairs to get ready for work, while the downstairs area warmed up. That's a real pain during New England winters!
We have a basic oil-fired, baseboard hot water heating system, no air conditioning or fans, and the LUX 500 was easy to install. You connect your thermostat wires to different terminals on the LUX 500, based on your heating/cooling system.
Can't vouch for more complicated heating/cooling systems, but the instructions are supplied, and look very thorough and straighforward.
We've been using it for two months, and really like it. You can set it to automatically raise or lower the temperature four times per day. For example (on weekdays), you can have the heat automatically turn up at 6:00 AM, then lower at 8:00 AM (when you leave for work), then have the heat come back on at 5:00 PM so the house is warm when you arrive, then lower at 11:00 PM when you go to bed. Separate settings for weekdays vs. weekends. You can also override the settings. So if you leave the house for a few hours, or for vacation, you press the "raise" or "lower" button to the temperature you want, then press the "hold" button, and it stays at that setting until you put it back in automatic mode. Very easy to make the settings, and the digital display is large enough that we don't need our reading glasses to see the temperature setting, as we needed to do with the old round thermostat. We like it so much that I just ordered a second unit to replace our upstairs thermostat.
NOTE: If you replace an old-fashioned thermostat that has a mercury switch, be sure to dispose of it properly (such as bringing it to a hazardous waste disposal center) instead of throwing it in the trash.
This thermostat is great!
Its cheap, fits the bill, holds up well to tenant abuse, and does its job.
The one downstairs has worked fine, no problems. It controls both the AC and the Heat.
But 2 have already died upstairs. The forst one just blew, it wouldn't turn on the AC at all. The second one starts fine, but when the temperature reaches is goal it will not turn off. The other day we were going up tp bed and the temperature was set to 74, and the AC was still blowing and it was actually 63. Our little baby was freezing in his room. I see that other people hace similar problems with this unit that it won't stop at the temperature needed.
So I am now shopping for another one, probably a Honeywell. And I will probably replace both just in case.
Amazon contact apparatus to cancel the order. I got no reply and on
9/9 they shipped the order. After getting the order I tried
contacting them again to no avail. I then posted a very negative
feedback thru Amazon. I was then contacted the next day by phone and
email by Mike Sala & David Ingemi (Crazy Dave) asking me to change
my feedback and they would refund my purchase price. I thanked them
and offered to send the item back but they said "no bother" so I
donated it to a charity. Nothing happened. I emailed them a few
more times and they promised to look into it but again nothing
happened. Now I am getting no response from them at all and I cannot repost my negative feed once I took it off. I am really not that interested in the refund but I don't like being jerked around. I have contacted Amazon directly but posting here seem to be my only way of getting my complaint out there.
We have a basic oil-fired, baseboard hot water heating system, no air conditioning or fans, and the LUX 500 was easy to install. You connect your thermostat wires to different terminals on the LUX 500, based on your heating/cooling system.
Can't vouch for more complicated heating/cooling systems, but the instructions are supplied, and look very thorough and straighforward.
We've been using it for two months, and really like it. You can set it to automatically raise or lower the temperature four times per day. For example (on weekdays), you can have the heat automatically turn up at 6:00 AM, then lower at 8:00 AM (when you leave for work), then have the heat come back on at 5:00 PM so the house is warm when you arrive, then lower at 11:00 PM when you go to bed. Separate settings for weekdays vs. weekends. You can also override the settings. So if you leave the house for a few hours, or for vacation, you press the "raise" or "lower" button to the temperature you want, then press the "hold" button, and it stays at that setting until you put it back in automatic mode. Very easy to make the settings, and the digital display is large enough that we don't need our reading glasses to see the temperature setting, as we needed to do with the old round thermostat. We like it so much that I just ordered a second unit to replace our upstairs thermostat.
NOTE: If you replace an old-fashioned thermostat that has a mercury switch, be sure to dispose of it properly (such as bringing it to a hazardous waste disposal center) instead of throwing it in the trash.
This thermostat is great!
Click Here For Most Helpful Customer Reviews >>
I buy these things for about 20 bucks at a local home center, when they are on sale. I use them in my rental buildings. I noticed a few bad reviews here, but can say from my experience that they work just fine. I have never had one not work, some have been in service for over 4 years.Its cheap, fits the bill, holds up well to tenant abuse, and does its job.
Best Deals on Smart Temp TX500E Programmable Thermostat
we had AC installed in our house last year. We have 2 zones. The AC company I guess worked with these Thermostats.The one downstairs has worked fine, no problems. It controls both the AC and the Heat.
But 2 have already died upstairs. The forst one just blew, it wouldn't turn on the AC at all. The second one starts fine, but when the temperature reaches is goal it will not turn off. The other day we were going up tp bed and the temperature was set to 74, and the AC was still blowing and it was actually 63. Our little baby was freezing in his room. I see that other people hace similar problems with this unit that it won't stop at the temperature needed.
So I am now shopping for another one, probably a Honeywell. And I will probably replace both just in case.
Honest reviews on Smart Temp TX500E Programmable Thermostat
I ordered this Item on 9/4. On 9/8 I emailed the seller thru theAmazon contact apparatus to cancel the order. I got no reply and on
9/9 they shipped the order. After getting the order I tried
contacting them again to no avail. I then posted a very negative
feedback thru Amazon. I was then contacted the next day by phone and
email by Mike Sala & David Ingemi (Crazy Dave) asking me to change
my feedback and they would refund my purchase price. I thanked them
and offered to send the item back but they said "no bother" so I
donated it to a charity. Nothing happened. I emailed them a few
more times and they promised to look into it but again nothing
happened. Now I am getting no response from them at all and I cannot repost my negative feed once I took it off. I am really not that interested in the refund but I don't like being jerked around. I have contacted Amazon directly but posting here seem to be my only way of getting my complaint out there.
Find helpful customer reviews and review ratings for Smart Temp TX500E Programmable Thermostat
This is a remarkably user friendly product that went from box to completed installation and programming in 30 minutes. The most difficult part of installation was removing it from the clamshell container. Simple and easy to use. Appears well made and has 3 year warranty. Can be easily removed from its base for programming. Accurate, reproducible temperature control. A bargain.Thursday, September 11, 2014
Cheap Fahrenheat/Marley F2516 Electric Convector Baseboard Heater
Customer Ratings: 
List Price: $57.99
Sale Price: $50.38
Today's Bonus: 13% Off

This was an easy install. Directions are good and the heater looks good when set up. The only thing I would like to see is recommandations on thermostats. Would recommend for anyone who wants to add heat to a room. This was the 120 model.
List Price: $57.99
Sale Price: $50.38
Today's Bonus: 13% Off
This was an easy install. Directions are good and the heater looks good when set up. The only thing I would like to see is recommandations on thermostats. Would recommend for anyone who wants to add heat to a room. This was the 120 model.
Saturday, June 7, 2014
Reviews of Dimplex Caprice Oak Electric Fireplace
Customer Ratings: 
List Price: $799.00
Sale Price: $699.00
Today's Bonus: 13% Off

DIDN'T HAVE A LOT OF EXTRA SPACE BUT REALLY WANTED A FIREPLACE SO I CHOSE THIS ONE. RECEIVED IN LESS THAN A WEEK AND IN GREAT CONDITION BECAUSE IT IS PACKED VERY WELL. HAVE TO GIVE 5 STARS BECAUSE IT IS A GREAT FIREPLACE OF NICE QUALITY FOR THE COST. I ONLY WAS DISAPPOINTED WITH THE "SHADE" OF OAK WHEN COMPARED TO OTHER OAK FURNITURE I HAVE IN THE SAME ROOM. IT HAS A REDDISH TONE THAT DOESN'T MATCH UP WITH MY RATHER LARGE OAK ENTERTAINMENT CENTER BUT MY FAMILY ASSURES ME THAT I WONT EVEN NOTICE IN A FEW DAYS. PRODUCES A PERFECT AMOUNT OF HEAT AND WAS SUPER EASY TO ASSEMBLE. GREAT DESIGN!! NEED TO MENTION THAT I HAD A DIFFERENT FP ON ORDER FROM A LOCAL STORE THAT DIDN'T SHOW UP ON TIME SO I CANCELLED AND NOW I AM GLAD BECAUSE THIS ONE IS SAME PRICE BUT MORE ELEGANT. FLAMES LOOK REAL AND IS VERY RELAXING TO SIT NEAR. LOOKS JUST LIKE PICTURE SHOWN. DRESSES UP A FAMILY ROOM FOR SURE!!
It looks great in my living room, very nice Flame Display.
The built in heater is also a plus.Price was right where it should be,...affordable.
Check it out!
SEI Cartwright Convertible Electric Fireplace, Slate/ Mission Oak
List Price: $799.00
Sale Price: $699.00
Today's Bonus: 13% Off
DIDN'T HAVE A LOT OF EXTRA SPACE BUT REALLY WANTED A FIREPLACE SO I CHOSE THIS ONE. RECEIVED IN LESS THAN A WEEK AND IN GREAT CONDITION BECAUSE IT IS PACKED VERY WELL. HAVE TO GIVE 5 STARS BECAUSE IT IS A GREAT FIREPLACE OF NICE QUALITY FOR THE COST. I ONLY WAS DISAPPOINTED WITH THE "SHADE" OF OAK WHEN COMPARED TO OTHER OAK FURNITURE I HAVE IN THE SAME ROOM. IT HAS A REDDISH TONE THAT DOESN'T MATCH UP WITH MY RATHER LARGE OAK ENTERTAINMENT CENTER BUT MY FAMILY ASSURES ME THAT I WONT EVEN NOTICE IN A FEW DAYS. PRODUCES A PERFECT AMOUNT OF HEAT AND WAS SUPER EASY TO ASSEMBLE. GREAT DESIGN!! NEED TO MENTION THAT I HAD A DIFFERENT FP ON ORDER FROM A LOCAL STORE THAT DIDN'T SHOW UP ON TIME SO I CANCELLED AND NOW I AM GLAD BECAUSE THIS ONE IS SAME PRICE BUT MORE ELEGANT. FLAMES LOOK REAL AND IS VERY RELAXING TO SIT NEAR. LOOKS JUST LIKE PICTURE SHOWN. DRESSES UP A FAMILY ROOM FOR SURE!!
Click Here For Most Helpful Customer Reviews >>
I did alot research and a cousin had one. Ordered the style I wanted & size for my condo. It came freight in just a couple of days and my mom and I put it together in maybe an hour, plugged it in and I LOVE IT. The flames are realistic and it warms my living room very nice. My cat's favorite place to lay is in front of my fireplace. I also have gotten alot of compliments.Best Deals on Dimplex Caprice Oak Electric Fireplace
Received this with a broken panel,...but vendor took care of my problem ASAP.It looks great in my living room, very nice Flame Display.
The built in heater is also a plus.Price was right where it should be,...affordable.
Honest reviews on Dimplex Caprice Oak Electric Fireplace
This fireplace was a warm beautiful finishing touch to our sunporch which was remodeled from a simple screened porch! It arrived promptly and was easy to assemble and we are enjoying it immensely!Find helpful customer reviews and review ratings for Dimplex Caprice Oak Electric Fireplace
There is no need to spend this much money, when the one I have link to below is just as good. I have seen both and I purchased the one below. I have received many compliments! It is beautiful and puts out a lot of heat. It comes well packaged and had no damage. You will be glad you didn't spend the extra money.Check it out!
SEI Cartwright Convertible Electric Fireplace, Slate/ Mission Oak
Monday, May 26, 2014
Best Nuheat TEMPO Floor Heat Non Programmable Thermostat 120/240 Dual Deals
Customer Ratings: 
List Price: $110.00
Sale Price: $109.00
Today's Bonus: 1% Off

The product arrived early and was easy to install. But I would strongly recommended spending the extra $$$ to get the programmable model, as having the ability to set the temperature at various levels during various times of the day is a extremely nice benefit and it would of save us $$$ in terms of energy usage.
List Price: $110.00
Sale Price: $109.00
Today's Bonus: 1% Off
The product arrived early and was easy to install. But I would strongly recommended spending the extra $$$ to get the programmable model, as having the ability to set the temperature at various levels during various times of the day is a extremely nice benefit and it would of save us $$$ in terms of energy usage.
Click Here For Most Helpful Customer Reviews >>
The only minor dissatisfaction is that when set at 82 deg Rees floor is at 78 degrees. It works fine otherwise. I was able to install (replacing a 10 year old programmable model. We justice left the original model set at same temp all day and all night 24/7 so this was the right model for us. I called NuHeat to get advice before purchasing.Best Deals on Nuheat TEMPO Floor Heat Non Programmable Thermostat 120/240 Dual
This thermostat works great. It's not programmable, but we didn't need one that was. It was very easy for the electrician to install and is easy to use. The backlight is nice too.Honest reviews on Nuheat TEMPO Floor Heat Non Programmable Thermostat 120/240 Dual
We do not like programmable thermostats and this one fills the bill. It is simple to operate and has worked great.Thursday, April 17, 2014
Discount Honeywell International CG512A1009 Locking Thermostat Guard
Friday, March 21, 2014
Buy Danby DPC6012BLS Silhouette Select Built-In Dual Zone Party Center
Customer Ratings: 
List Price: $1,679.99
Sale Price: $1,296.00
Today's Bonus: 23% Off

It's better looking than the pictures and has cool blue interior lighting. The slide out shelves make it easy to reach items in the back and have stops to prevent them from coming all the way out. Most important, the unit allows me to maintain different temperatures on each side. The beer stays cold and the wine is chilled (very satisfied). Ice maker is good given everything else overdelivered and I have never run out of ice. I am very satisfied so far but it runs a lot and am worried about durability.
Everything turned out OK in the end but this fridge wasnt "plug and play."
List Price: $1,679.99
Sale Price: $1,296.00
Today's Bonus: 23% Off
It's better looking than the pictures and has cool blue interior lighting. The slide out shelves make it easy to reach items in the back and have stops to prevent them from coming all the way out. Most important, the unit allows me to maintain different temperatures on each side. The beer stays cold and the wine is chilled (very satisfied). Ice maker is good given everything else overdelivered and I have never run out of ice. I am very satisfied so far but it runs a lot and am worried about durability.
Click Here For Most Helpful Customer Reviews >>
I purchased the fridge for over a thousand dollars. The item keeps drinks and food cold but makes no ice. IT is a defective item. I emailed the seller wsports. And Im waiting on the reply to fix the icemaker.Best Deals on Danby DPC6012BLS Silhouette Select Built-In Dual Zone Party Center
I bought this fridge to replace a cheap existing one and was very disappointed with the construction quality. Loose screws on shelves, wouldnt turn on when plugged in which ended up being the mother board wasnt plugged in etc.etc.Everything turned out OK in the end but this fridge wasnt "plug and play."
Sunday, March 9, 2014
Air King 9166 20" Whole-House Window Fan Reviews
Customer Ratings: 
List Price: $240.00
Sale Price: $142.03
Today's Bonus: 41% Off

Air King has had a 20", model 9166 for quite awhile. I bought my original in 1998. It filled the important niche between an industrial strength attic fan and a smaller lightweight window fan. In 2004 the original plastic fan blade failed, but fortunately I was able to obtain a replacement. That model 9166 continued in service until last month when it screeched to a stop with a seized "lubricated for life" bearing and another cracked plastic blade.
The new model 9166D (under review) was purchased as a direct replacement. While the new 9166 now has an aluminum blade, unfortunately it has a weaker smaller motor, resulting in inferior performance. The old 9166 had a quiet low speed of 520 RPM that moved a respectable 4160 CFM. The new 9166's low speed is a noisy 1100 RPM, but at that speed it only moves 2510 CFM. So at that twice the speed it moves only a little more than half the air.
Air King's 9166D specifications tell the story of the weaker performance. The weaker motor consumes less power, but is noisier at all speeds.
HIGH MED LOW
OLD CFM 7005 6155 4160
NEW CFM 3560 3120 2510
I'm Kelly Thomas, I own Installation was quick, easy and a big red sticker told me to reverse the side panels as well as the first line in the instruction manual. I'm also pleased to see the all metal construction, this fan is built to last. (plastic blades will flex and your cfm will drop.) Yea, it's noisy at full speed but I've got some light weather stripping that'll be perfect to significantly reduce the vibrations. We'll mostly run it at low speed anyway which still moves 2510 CFM. In contrast, we recently purchased TWO $8.00 twin plastic window fans from a local big box on closeout, [ regular price ~$20.00+, very much like, the Holmes HAWF2030 ] and those things are not worth spit!! The Air King will just about suck the cat through the door from across the room! I'm confident that my Air King was well worth the money.
This fan no longer works. Turned it on back in November and it was as dead as a door nail. I was busy and didn't have time to mess with it but just recently sent email to company to see if there might be a quick fix. Will let you know.
Received reply from Air & Water Inc. Here it is.
---
Unfortunately the item is out of warranty and we are unable to exchange the product. We do not offer technical support for thee units, what I would recommend doing is contacting the manufacturer directly to see if they may be able to troubleshoot the product. To contact Air King directly please call 877-304-3785.
Thank you for choosing Air & Water, Inc.
----
Well, the box works for Christmas light storage. It is sturdy and keeps the rats out.
**********************************************
I have read a lot about this fan, both good and bad. With some of the bad reviews I had to ask myself, "How far has fan motor technology progressed in the last 20 years?" I have fans over 20 years old that still run and that made me wonder about the complaints of "motor burn out." Lets take a look at what might be happening with "FANS GONE WILD."
First of all this fan is like an engine, it needs air to run properly. That pedestal fan or ceiling fan in your home has and endless supply of air as it isn't removing or replacing air, it is only moving it around. But a window fan needs more an unobstructed source. Since it is moving air either in or out of a capsule (your home) it must be able to do so freely. I know, I know, I'm just like you. I love to turn a window fan on, crack another window open about 2 inches and feel that wind roaring through but that isn't what is best for the fan in the long term. You need to have at least 2 windows open = to the size of this fan to help it live a long and healthy life. This fan is already working hard moving a lot of air it shouldn't have to struggle for the air.
As well, get rid of the screen where you have the fan installed, that equates to about a 50% blockage. It impedes air movement in either direction. It blocks air being removed by the fan if you are exhausting air from the home or it blocks air trying to enter the fan if you are blowing air into the home get rid of it. As well, this is why you need 2 windows open to run an exhaust fan. Those 2 windows probably have screens that impede the air movement as well. You can leave those screens in place but open at least 2 windows.
The test: Open the intake windows you plan on using while running your fan. With the fan running now crack a door open to the outside of the home. Without closing the door or lodging it in place, gently push the door closed. If the fan is still trying to pull air in through that door, pushing it back open, you need more windows open. Air should be entering your home with the least amount of resistance possible.
My 19 year old son and I installed it he said it was the easiest thing we have ever put together and installed it was. It is a little noisy so you will need to place it away from a main living area. If you are like me however, that fan will put you to sleep in about 5 minutes in your bedroom. It looks good and the Storm Guard feature works easily and as advertised, allowing you to close the window when the fan is not in use.
Remember and trust that this fan is moving a lot of air as advertised, you don't need a small cracked intake window with a 30 knot breeze blowing through it to know that. 2 intake windows open to the size of the fan should do. All you are looking for from where the air is entering the home is the sensation of a vague feel of air movement not a 30 knot breeze. To restrict the air flow of a fan is like driving your car with the parking brake on your brakes will be gone before you know it.
That fan that sits on the counter or pedestal doesn't have to work for air, it is all contained within the capsule, your home, those fans merely moves air. An exhaust / intake fan is different, much different. Make it easy on your fan and make it easy on yourself.
Good fan I like it. If the motor craps out on me this decade I'll let you know and take back all of this.
I haven't disregarded the bad reports I have read, I shall keep the box for a while.
Always
Uncle Jim.
My name is Jim, I have a high school diploma and am a self proclaimed expert in Fanology. All of my fans still run.
I could sit and argue with those who complain that it's not "all metal"; and it's not. However, the blades, motor, fan grill, primary housing and extensions are metal, which is all that matters to me. There is a decorative plastic cover, which I find perfectly acceptable as it doesn't affect the performance in any way.
And WOW does this fan perform! I came home shortly after dusk to a 77 degree house after a fairly warm day. Outside, the temperature was in the 60s. I like it cool; I switched the fan to "medium" exhaust, cracked open a couple of windows and my house temp was 70 degrees in less than 30 minutes.
I'm fortunate to live in an area where the temperature variance between night and day is fairly high if you do too, you'll love this fan. And at bucks, with little noticeable change in your electricity bill, you will too.
List Price: $240.00
Sale Price: $142.03
Today's Bonus: 41% Off
Air King has had a 20", model 9166 for quite awhile. I bought my original in 1998. It filled the important niche between an industrial strength attic fan and a smaller lightweight window fan. In 2004 the original plastic fan blade failed, but fortunately I was able to obtain a replacement. That model 9166 continued in service until last month when it screeched to a stop with a seized "lubricated for life" bearing and another cracked plastic blade.
The new model 9166D (under review) was purchased as a direct replacement. While the new 9166 now has an aluminum blade, unfortunately it has a weaker smaller motor, resulting in inferior performance. The old 9166 had a quiet low speed of 520 RPM that moved a respectable 4160 CFM. The new 9166's low speed is a noisy 1100 RPM, but at that speed it only moves 2510 CFM. So at that twice the speed it moves only a little more than half the air.
Air King's 9166D specifications tell the story of the weaker performance. The weaker motor consumes less power, but is noisier at all speeds.
HIGH MED LOW
OLD CFM 7005 6155 4160
NEW CFM 3560 3120 2510
Click Here For Most Helpful Customer Reviews >>
I'm Kelly Thomas, I own Installation was quick, easy and a big red sticker told me to reverse the side panels as well as the first line in the instruction manual. I'm also pleased to see the all metal construction, this fan is built to last. (plastic blades will flex and your cfm will drop.) Yea, it's noisy at full speed but I've got some light weather stripping that'll be perfect to significantly reduce the vibrations. We'll mostly run it at low speed anyway which still moves 2510 CFM. In contrast, we recently purchased TWO $8.00 twin plastic window fans from a local big box on closeout, [ regular price ~$20.00+, very much like, the Holmes HAWF2030 ] and those things are not worth spit!! The Air King will just about suck the cat through the door from across the room! I'm confident that my Air King was well worth the money.
Best Deals on Air King 9166 20" Whole-House Window Fan
****** UPDATE 15 MONTHS AFTER PURCHASE*******This fan no longer works. Turned it on back in November and it was as dead as a door nail. I was busy and didn't have time to mess with it but just recently sent email to company to see if there might be a quick fix. Will let you know.
Received reply from Air & Water Inc. Here it is.
---
Unfortunately the item is out of warranty and we are unable to exchange the product. We do not offer technical support for thee units, what I would recommend doing is contacting the manufacturer directly to see if they may be able to troubleshoot the product. To contact Air King directly please call 877-304-3785.
Thank you for choosing Air & Water, Inc.
----
Well, the box works for Christmas light storage. It is sturdy and keeps the rats out.
**********************************************
I have read a lot about this fan, both good and bad. With some of the bad reviews I had to ask myself, "How far has fan motor technology progressed in the last 20 years?" I have fans over 20 years old that still run and that made me wonder about the complaints of "motor burn out." Lets take a look at what might be happening with "FANS GONE WILD."
First of all this fan is like an engine, it needs air to run properly. That pedestal fan or ceiling fan in your home has and endless supply of air as it isn't removing or replacing air, it is only moving it around. But a window fan needs more an unobstructed source. Since it is moving air either in or out of a capsule (your home) it must be able to do so freely. I know, I know, I'm just like you. I love to turn a window fan on, crack another window open about 2 inches and feel that wind roaring through but that isn't what is best for the fan in the long term. You need to have at least 2 windows open = to the size of this fan to help it live a long and healthy life. This fan is already working hard moving a lot of air it shouldn't have to struggle for the air.
As well, get rid of the screen where you have the fan installed, that equates to about a 50% blockage. It impedes air movement in either direction. It blocks air being removed by the fan if you are exhausting air from the home or it blocks air trying to enter the fan if you are blowing air into the home get rid of it. As well, this is why you need 2 windows open to run an exhaust fan. Those 2 windows probably have screens that impede the air movement as well. You can leave those screens in place but open at least 2 windows.
The test: Open the intake windows you plan on using while running your fan. With the fan running now crack a door open to the outside of the home. Without closing the door or lodging it in place, gently push the door closed. If the fan is still trying to pull air in through that door, pushing it back open, you need more windows open. Air should be entering your home with the least amount of resistance possible.
My 19 year old son and I installed it he said it was the easiest thing we have ever put together and installed it was. It is a little noisy so you will need to place it away from a main living area. If you are like me however, that fan will put you to sleep in about 5 minutes in your bedroom. It looks good and the Storm Guard feature works easily and as advertised, allowing you to close the window when the fan is not in use.
Remember and trust that this fan is moving a lot of air as advertised, you don't need a small cracked intake window with a 30 knot breeze blowing through it to know that. 2 intake windows open to the size of the fan should do. All you are looking for from where the air is entering the home is the sensation of a vague feel of air movement not a 30 knot breeze. To restrict the air flow of a fan is like driving your car with the parking brake on your brakes will be gone before you know it.
That fan that sits on the counter or pedestal doesn't have to work for air, it is all contained within the capsule, your home, those fans merely moves air. An exhaust / intake fan is different, much different. Make it easy on your fan and make it easy on yourself.
Good fan I like it. If the motor craps out on me this decade I'll let you know and take back all of this.
I haven't disregarded the bad reports I have read, I shall keep the box for a while.
Always
Uncle Jim.
My name is Jim, I have a high school diploma and am a self proclaimed expert in Fanology. All of my fans still run.
Honest reviews on Air King 9166 20" Whole-House Window Fan
I recently purchased a home (stripped foreclosure; the expense of air conditioning was not an option) in Oakland, CA. Like where I used to live (San Francisco), Oakland has a very mild climate most of the time. However, over on this side of the Bay, it tends to get hotter during the day, which can lead to an uncomfortably warm, stuffy house after being closed up all day. Enter the Air King 9166 (psssssst! I bought it at the company website! It's $30 less and FREE overnight shipping!)I could sit and argue with those who complain that it's not "all metal"; and it's not. However, the blades, motor, fan grill, primary housing and extensions are metal, which is all that matters to me. There is a decorative plastic cover, which I find perfectly acceptable as it doesn't affect the performance in any way.
And WOW does this fan perform! I came home shortly after dusk to a 77 degree house after a fairly warm day. Outside, the temperature was in the 60s. I like it cool; I switched the fan to "medium" exhaust, cracked open a couple of windows and my house temp was 70 degrees in less than 30 minutes.
I'm fortunate to live in an area where the temperature variance between night and day is fairly high if you do too, you'll love this fan. And at bucks, with little noticeable change in your electricity bill, you will too.
Find helpful customer reviews and review ratings for Air King 9166 20" Whole-House Window Fan
We have a steam and radiant-heated home, thus no vents for central A/C. Plus, here in Michigan we don't need it too often. My wife and I prefer fresh air in the home anyway and only use our bedroom A/C unit when absolutely necessary. Now we have this Air King fan which we bought from (great price and delivery). Installation was a breeze (yuk-yuk), but make sure you have a window large enough to accept it. The height specification (26 1/4") is ideal, but the fan needs about 24" of open space to be effective. The 27" minimum width is required, however. Follow the simple instructions, and you should have no problems. Just make sure the window has a screen on it. I installed the fan in my wife's study on the upper floor. Since hot air rises, I prefer this location to a main floor one. By adjusting which windows and doors are open, you can control the amount of air pulled thru the home. Actually the amount is constant for a given speed, but the effect can be enhanced by closing off windows or doors to create a greater venting effect throughout the home. Today, it hit a balmy 90 degrees, and we really felt how well this fan keeps the air 'fresh' and not stagnant. Noise is the biggest negative, however. At the highest speed, my wife can't stand being in the same room with the fan. The low setting is still powerful, but the noise is tolerable. By noise, I mean air 'white' noise and not motor noise. We usually keep the fan on most of the day at the low or mid setting. On hot days, the high setting is best for our 2200 sq ft home. The fan is well-made and I expect it to last for years. This is well worth the comparably high cost vs the cheap box fans.Saturday, January 18, 2014
Best Raclette Party Grill Deals
Although I expected the unit to have a heat regulating dial, I decided to try the grill out anyway.
Well, it performed as expected. I bought two since I have a family of five.
My kids love Raclette night because they get to cook their own food.
We have used it twice now and has been a great addition to our family fun night. The only wish is that it came with tongs and spatulas.
Other than that, great grill for the money!
I really lost my money.....
The quality is not good, but if at least it works!!!
Now I have to send it to fix here, spend more money cause to send it back to the States will cost me more that a $100 dollars.
So bad.
We have not tried the grill option.
Well, it performed as expected. I bought two since I have a family of five.
My kids love Raclette night because they get to cook their own food.
We have used it twice now and has been a great addition to our family fun night. The only wish is that it came with tongs and spatulas.
Other than that, great grill for the money!
Click Here For Most Helpful Customer Reviews >>
I am giving this product 3 stars because I can't speak to its functionality. Before I even thought about firing it up, I noticed that it was lacking the all-important heating dial that is shown in the images in the product description and that is also normally included with a traditional raclette anyway. I utilized amazon's awesomely easy and speedy return procedure, and it will be out of here on Monday. I hope to find a replacement at a later time, but my New Year's party plans will now have to be modified a bit.Best Deals on Raclette Party Grill
This Raclette arrived into my country Ecuador, It didn't even turn on !!!!I really lost my money.....
The quality is not good, but if at least it works!!!
Now I have to send it to fix here, spend more money cause to send it back to the States will cost me more that a $100 dollars.
So bad.
Honest reviews on Raclette Party Grill
Good value for the money. We use it for raclette and it fulfills its job. We'd wish a bit more power in the heater, on the other hand you do raclette with friends and the waiting is then acceptable.We have not tried the grill option.
Find helpful customer reviews and review ratings for Raclette Party Grill
Spend a little more and get a good one. There's no heat adjustment on this unit and the cooking surface is made of very thin coated sheet metal. We own another one which we keep at our vacation home and the difference is like night and day.Thursday, November 21, 2013
Reviews of M-D Building Products 64428 18-Foot Pipe Heating Cable
Customer Ratings: 
List Price: $42.99
Sale Price: $32.64
Today's Bonus: 24% Off

North Florida here and thought this product might be used to protect plumbing outside the pump house. After receiving the product and reading the entire manual, it shouldn't be used outside. Returned.
This is a FOLLOWUP to my original review dated January 8, 2013. Heat tape installed 9/2011 has failed. Woke up early AM 1/21/2013 and pipes were frozen. We live in a 1992 moblie home, built for us and we have lived in it for 20 years. The original heat tape lasted us 15 years then failed. We a had it replaced by a heating contractor and that failed us within 2 years. That is when we replaced it ourselves with this product,now that has failed. Luckily I purchased a second one but I don't hold out much hope of that lasting very long. Will now go to hardware store to purchase a heat gun.
List Price: $42.99
Sale Price: $32.64
Today's Bonus: 24% Off
North Florida here and thought this product might be used to protect plumbing outside the pump house. After receiving the product and reading the entire manual, it shouldn't be used outside. Returned.
Click Here For Most Helpful Customer Reviews >>
I wrapped my wellhead and exposed pipes and it does the job w/o insulation. ( I may add insulatiuon this year) Automatic switch works as advertised. If you have exposed pipes. This works.Best Deals on M-D Building Products 64428 18-Foot Pipe Heating Cable
We purchased this heat tape and the insulation for it and installed it 9/2011. It is still working. The install was straight forward and not difficult. This recent purchase is a backup.This is a FOLLOWUP to my original review dated January 8, 2013. Heat tape installed 9/2011 has failed. Woke up early AM 1/21/2013 and pipes were frozen. We live in a 1992 moblie home, built for us and we have lived in it for 20 years. The original heat tape lasted us 15 years then failed. We a had it replaced by a heating contractor and that failed us within 2 years. That is when we replaced it ourselves with this product,now that has failed. Luckily I purchased a second one but I don't hold out much hope of that lasting very long. Will now go to hardware store to purchase a heat gun.
Honest reviews on M-D Building Products 64428 18-Foot Pipe Heating Cable
I did not appreciate that I am supposed to wrap the tape around the pipe, and then wrap everything with waterproof tape. We have freezing weather in Los Angeles about 2-3 days a year and it did not seem worth the effort to install.Find helpful customer reviews and review ratings for M-D Building Products 64428 18-Foot Pipe Heating Cable
Had to send this back the next day,it never came"on" and remained at the temperature of the space where my pipes were. Tried to get off cheap, will only order "WRAP ON" brand from now on.
Subscribe to:
Posts (Atom)