Click Here For Most Helpful Customer Reviews >>
Cost effective and energy efficient. It installed without any modifications to the box or wall. No ground. It keeps an even temperature and is very accurate. It pulses the energy to the unit so it's not full throttle or off. This will not work on cadet fan type heaters and is only for Baseboard electric. It has made our backup heater in the bedroom very pleasant when the fireplace goes out at night! AAA+++
Showing posts with label thermostat with wifi. Show all posts
Showing posts with label thermostat with wifi. Show all posts
Sunday, January 11, 2015
Best Honeywell RLV310A1000 Digital Non-Programmable Baseboard Thermostat Deals
I have only 3 months experience with the product but it seems to be a great one. Installation instructions are clear, operation is simple (push one of two buttons to bump temp up or down). It appears to regulate temperature as per the specs (don't have thermometer that tracks to a fraction of a degree, however), it's electronic thus silent operation, but little symbols on the display show which of 5 levels of power are being supplied to the baseboard heater to maintain temp. A huge improvement over the rotary mechanical wall thermostat we replaced.
Wednesday, November 26, 2014
Review of Honeywell Deluxe EnergySmart Cool Touch Heater - Black
Customer Ratings: 
List Price: $59.99
Sale Price: $52.77
Today's Bonus: 12% Off

This is an excellent little heater. I had the previous version for and it used it almost daily for about two years, I just bought this new one to replace it. It's very quiet, easy to use, and puts out a good amount of heat. My favorite feature is the thermostat, I can set it so that while I'm sleeping it keeps at a constant temp. It turns off at the desired temp and turns back on if it gets too cold. It's very comforting to know that I won't wake up freezing.
List Price: $59.99
Sale Price: $52.77
Today's Bonus: 12% Off
This is an excellent little heater. I had the previous version for and it used it almost daily for about two years, I just bought this new one to replace it. It's very quiet, easy to use, and puts out a good amount of heat. My favorite feature is the thermostat, I can set it so that while I'm sleeping it keeps at a constant temp. It turns off at the desired temp and turns back on if it gets too cold. It's very comforting to know that I won't wake up freezing.
Saturday, November 8, 2014
Buy Amico 150C NC Temperature Switch Ceramic Thermostat KSD201 2 Pcs
I used this part to fix my Jenn-Air microwave. Works great! Plus I have a spare!
It wasn't an exact fit, but I made it fit easy enough (it's a little bigger, bending the mounting tabs got it to fit). It has the same cut-off temperature as the original, so it is perfect. Plus I saved at least $25 as the OEM piece is significantly marked up. While I waited for the part, I put a jumper over the thermostat. The thermostat was located over the magnetron. I knew the thermostat was the problem as the ohm reading was higher than near zero. Plus I checked the magnetron to make sure it wasn't getting too hot.
It wasn't an exact fit, but I made it fit easy enough (it's a little bigger, bending the mounting tabs got it to fit). It has the same cut-off temperature as the original, so it is perfect. Plus I saved at least $25 as the OEM piece is significantly marked up. While I waited for the part, I put a jumper over the thermostat. The thermostat was located over the magnetron. I knew the thermostat was the problem as the ohm reading was higher than near zero. Plus I checked the magnetron to make sure it wasn't getting too hot.
Thursday, November 6, 2014
Review of Sunbeam Dynasty Cuddle-Up Fleece Heated Throw Electric Warming
Customer Ratings: 
List Price: $59.99
Sale Price: $29.95
Today's Bonus: 50% Off

My thoughts on the sunbeam throw I threw in the trash the day my new soft heat throw came in the mail:
The sunbeam throw has a very few huge stiff cords running through it. The cords are held in place by a few tied strings located more than a foot apart on the throw. These strings are very easily broken leaving the heating cords to move and not heat large portions of the blanket.
The portion of the sunbeam throw that plugged in is located in a most inconvenient place with a too short cord and it is impossible to find or reach the controller. The cord plugs into the middle of one side of the throw about 8 inches from the edge. This leaves about a foot of cord sticking out that, depending on whether you put it on top or bottom. My feet were constantly tangled in the cord or the stiff cord stuck up in my face. Mysteriously sunbeam put the controller on a cord about 3 feet long originating from the plug in site. This configuration necessitates finding the cord, reeling it in, and finding the controller. The sunbeam timer (auto 3 hour off) never worked and the controller is so easy to bump that I was left having to reel it in every time I felt cold or hot and check it.
There is a clip on the controller to supposedly clamp it to an accessible place on the blanket. Because the cord is too short this leaves the only viable location you can clip the cord to the blanket requires the rather large plug to be in the center of your chest. The plug is so large and cord so stiff that this is uncomfortable no matter what you do. I could not remove the sunbeam cord plug from the blanket without breaking it so washing was impossible. Not that I would have trusted it for use after washing it. About 3 months after use the blanket began to heat only in a 1-foot radius around the power plug. The controller also began to be warm or hot whether the blanket was turned on or not.
A friend bought one at the same time I did. I used mine every day, she used hers a few times a month. A few months after mine quit heating hers did the same thing. This seems therefore to be normal poor performance depending on how often you use it.
List Price: $59.99
Sale Price: $29.95
Today's Bonus: 50% Off
My thoughts on the sunbeam throw I threw in the trash the day my new soft heat throw came in the mail:
The sunbeam throw has a very few huge stiff cords running through it. The cords are held in place by a few tied strings located more than a foot apart on the throw. These strings are very easily broken leaving the heating cords to move and not heat large portions of the blanket.
The portion of the sunbeam throw that plugged in is located in a most inconvenient place with a too short cord and it is impossible to find or reach the controller. The cord plugs into the middle of one side of the throw about 8 inches from the edge. This leaves about a foot of cord sticking out that, depending on whether you put it on top or bottom. My feet were constantly tangled in the cord or the stiff cord stuck up in my face. Mysteriously sunbeam put the controller on a cord about 3 feet long originating from the plug in site. This configuration necessitates finding the cord, reeling it in, and finding the controller. The sunbeam timer (auto 3 hour off) never worked and the controller is so easy to bump that I was left having to reel it in every time I felt cold or hot and check it.
There is a clip on the controller to supposedly clamp it to an accessible place on the blanket. Because the cord is too short this leaves the only viable location you can clip the cord to the blanket requires the rather large plug to be in the center of your chest. The plug is so large and cord so stiff that this is uncomfortable no matter what you do. I could not remove the sunbeam cord plug from the blanket without breaking it so washing was impossible. Not that I would have trusted it for use after washing it. About 3 months after use the blanket began to heat only in a 1-foot radius around the power plug. The controller also began to be warm or hot whether the blanket was turned on or not.
A friend bought one at the same time I did. I used mine every day, she used hers a few times a month. A few months after mine quit heating hers did the same thing. This seems therefore to be normal poor performance depending on how often you use it.
Click Here For Most Helpful Customer Reviews >>
Item was more like cheap felt than soft fleece. I wouldn't recommend this product. Sunbeam makes a better fleece throw this one.Best Deals on Sunbeam Dynasty Cuddle-Up Fleece Heated Throw Electric Warming
Bought this as a gift for an elderly cancer patient who is often Cold...He loves it and uses it daily for maintaining body heat!Honest reviews on Sunbeam Dynasty Cuddle-Up Fleece Heated Throw Electric Warming
This blanket is good quality but it does not get warm enough. There are 3 settings-low, medium and high. On the high setting the blanket is slightly warm and not hot like other electric blankets Ive used. I would not buy this blanket because of this.Find helpful customer reviews and review ratings for Sunbeam Dynasty Cuddle-Up Fleece Heated Throw Electric Warming
I absolutely love the heated throw. I keep it in my recliner and when I want a little extra warmth, I turn it on and cuddle up and since I am height challenged, it is just right to keep me toasty.Wednesday, November 5, 2014
Cheap SPT SH-1505 Ceramic Heater with Humidifier
Customer Ratings: 
List Price: $179.99
Sale Price: $64.70
Today's Bonus: 64% Off

I needed the temperature in my baby's room to stay the same even though we're in a small apartment. This really did the trick. It looks great is very compact compared to other ugly large heater humidifiers AND it is both a heater and humidifier so even when it warms up in there it does feel so dry. It also has a tip over feature, which or safety is great. The only reason I didn't give it 5 stars is I wish you could operate the humidifer separate from the heater but you can't. Can't have it all I guess. Oh, and we have a modern looking apartment and this fits right in!
On the plus side, the heater seems to fire up quickly and the fan is very, very quiet---almost imperceptible.
I've concluded that getting separate humidifier and heater is probably a better way to go.
Wes
List Price: $179.99
Sale Price: $64.70
Today's Bonus: 64% Off
I needed the temperature in my baby's room to stay the same even though we're in a small apartment. This really did the trick. It looks great is very compact compared to other ugly large heater humidifiers AND it is both a heater and humidifier so even when it warms up in there it does feel so dry. It also has a tip over feature, which or safety is great. The only reason I didn't give it 5 stars is I wish you could operate the humidifer separate from the heater but you can't. Can't have it all I guess. Oh, and we have a modern looking apartment and this fits right in!
Click Here For Most Helpful Customer Reviews >>
We bought this because of the humidifier feature. However, the humidifier is very hard to fill (You have to pour it in at a trickle), and the reservoir is tiny. Fortunately, neither of these things are really a problem because it takes weeks to even produce enough humidity to go through that tiny amount of water. I think you could literally just leave out a glass of water and it would evaporate faster than what this thing puts out. DON'T waste your money buying this. The heater is totally adequate, but you can find one just as good without the humidifier for one third the price. Buy a separate heater and humidifier and you'll still come out ahead and you'll have a humidifier that actually works. Seriously. I never take the time to write reviews, but this thing is a joke. Save your money!Best Deals on SPT SH-1505 Ceramic Heater with Humidifier
I bought this heater for my husband who suffers from arthritis. He likes is extra hot in the room so we were using a space heater at night. However he started getting bad nose bleeds from the hot dry air. The SPT SH-1505 Ceramic Heater with Humidifier has stopped the nose bleeds altogether. I can feel the humidy in the room and the heater works well to heat a room. I would recommend this product.Honest reviews on SPT SH-1505 Ceramic Heater with Humidifier
As others have noted, filling the humidifier reservoir is confounding because one must poor so slowly. Plus, humidifier consumes full reservoir of water on low setting if run overnight. Moisture/humidity not appreciably better. "Thermostat" is nothing more than a manual switch which allows high/low/off settings.On the plus side, the heater seems to fire up quickly and the fan is very, very quiet---almost imperceptible.
I've concluded that getting separate humidifier and heater is probably a better way to go.
Find helpful customer reviews and review ratings for SPT SH-1505 Ceramic Heater with Humidifier
The heater works real good, but the heater has to run for the humidifier to work. So can't run it on high as it will shut off, but found out on low it runs all the time so I run it on low to get heat and humidity.Wes
Sunday, October 26, 2014
2gig Z-STAT Z-Wave Programmable Thermostat Review
I like it except for a few key issues, the touch screen is a nice feature and nice looking.
a few issues...
1. Once connected to Z-wave it will not run off the built in schedule on the unit, you must schedule from z-wave.
2. Unit does not report set-point temp to z-wave, ie: if someone changes the temp at the thermostat, the change will not be reflected in Z-wave, it will only know the last setting that was initiated through Z-wave. This seems to be a known, designed by choice, issue.
3. After about a week of seemingly working fine, it began to lose contact with the Z-wave network, and commands would not be sent to it. I changed the batteries, removed it and re-added it a few times before it would work normally again, at that point it was not recognized as the same node, so all my scenes in Vera did not refer to it anymore so I had to redo all the scenes.
4. From reading the forums it seems reliability can be spotty due to running off batteries rather than 24V power, of course, the fact that this unit can run on batteries is one of its main selling points in the first place. What I will say about running power to this thing, or the "C" wire or "Common" as it's referred to is that the C wire is no more than a ground back at the source of the thermostat wire. This is rarely mentioned in the all the posting about C wires and transformers, etc. but from what I have learned, that is essentially all it is. I do not have a C wire but I do have a common back at the Taco SR502 that my boiler and hot water tank are hooked to so all I have to do is pull a 3rd wire to my T-stat and connect to the terminal labeled "COM" in the SR502 and it should work, but if it didn't have that I should be able to just run a wire to the metal cabinet of the boiler, furnace, or wherever the T-stat wire originates from.
5. I would prefer there to be a plate that mounts to the wall where you wire to and then the unit snaps into the plate. The LuxPro this replaced was like that, and is also "armchair programable" as they say. Also, the battery and wiring access covers are tricky to remove and there is no instruction on how to do so.
6. Not knowing that the built in schedule would be useless, I went ahead and programmed the whole thing, this was a tedious process which did not seem to function exactly as the manual says, especially the "Copy" function which did not seem to work at all.
The Trane and 2Gig both work fine with my Vera 2 controller, but I had trouble with the Honeywell, as it turns on the air and heat at same time. I think the 24V common needs to connect to the air conditioner/compressor instead of the furnace, which might be a problem for me.
Bottom line, Trane and 2Gig work fine with my Vera 2 system. I like the looks of 2Gig better, it is cheaper, and does not require a 24V common. The new office will get 2Gig thermostats.
After reading the extra insert instructions, I then realized that the t stat needed to be placed in wireless mode which hides the clock and some other displays on the face of unit. This was done by holding down the program button for 12 seconds, and then linking the z wave controller to the t stat. Once that was done I went to z wave controller, did a network heal, and proceeded to program in scenes. I am happy to report that all works as intended now and that a month into usage the batteries are still holding at 90%. The t stat can be operated in total darkness if needed, just lightly touch the screen and it lights up really bright and stays on for about 3 to 4 seconds after. I also tested the notifications feature and it works flawlessly. This unit is highly recommended and it looks like there have been some improvements over the first models prior to this one.
For me, I needed ones that run on batteries as I do not have a 24V Common wire coming from my boiler to power it. This was it. I have three installed, two on radiant heat floors and one on forced hot air from a heat exchanger (from the boiler).
Will save me LOADS of $$ on propane.
a few issues...
1. Once connected to Z-wave it will not run off the built in schedule on the unit, you must schedule from z-wave.
2. Unit does not report set-point temp to z-wave, ie: if someone changes the temp at the thermostat, the change will not be reflected in Z-wave, it will only know the last setting that was initiated through Z-wave. This seems to be a known, designed by choice, issue.
3. After about a week of seemingly working fine, it began to lose contact with the Z-wave network, and commands would not be sent to it. I changed the batteries, removed it and re-added it a few times before it would work normally again, at that point it was not recognized as the same node, so all my scenes in Vera did not refer to it anymore so I had to redo all the scenes.
4. From reading the forums it seems reliability can be spotty due to running off batteries rather than 24V power, of course, the fact that this unit can run on batteries is one of its main selling points in the first place. What I will say about running power to this thing, or the "C" wire or "Common" as it's referred to is that the C wire is no more than a ground back at the source of the thermostat wire. This is rarely mentioned in the all the posting about C wires and transformers, etc. but from what I have learned, that is essentially all it is. I do not have a C wire but I do have a common back at the Taco SR502 that my boiler and hot water tank are hooked to so all I have to do is pull a 3rd wire to my T-stat and connect to the terminal labeled "COM" in the SR502 and it should work, but if it didn't have that I should be able to just run a wire to the metal cabinet of the boiler, furnace, or wherever the T-stat wire originates from.
5. I would prefer there to be a plate that mounts to the wall where you wire to and then the unit snaps into the plate. The LuxPro this replaced was like that, and is also "armchair programable" as they say. Also, the battery and wiring access covers are tricky to remove and there is no instruction on how to do so.
6. Not knowing that the built in schedule would be useless, I went ahead and programmed the whole thing, this was a tedious process which did not seem to function exactly as the manual says, especially the "Copy" function which did not seem to work at all.
Click Here For Most Helpful Customer Reviews >>
I am testing a variety of z-wave devices in my home prior to deciding which to be used at our new office building. I have now evaluated the Trane Remote Energy Management Thermostat (by Schlage), Honeywell TH8320ZW1007/U Z-Wave Enabled Programmable Thermostat, and this 2Gig Z-STAT Z-Wave Programmable Thermostat. In my home, there is a 24 V common (blue) wire but it was not connected. Fortunately, I was easily able to connect that wire. The Trane and Honeywell require a 24V common wire as a previous reviewer noted, while the 2Gig uses 3 AA batteries. I also was worried that the backlight would not look so good on the 2Gig, but it actually looks better than the others IMO.The Trane and 2Gig both work fine with my Vera 2 controller, but I had trouble with the Honeywell, as it turns on the air and heat at same time. I think the 24V common needs to connect to the air conditioner/compressor instead of the furnace, which might be a problem for me.
Bottom line, Trane and 2Gig work fine with my Vera 2 system. I like the looks of 2Gig better, it is cheaper, and does not require a 24V common. The new office will get 2Gig thermostats.
Best Deals on 2gig Z-STAT Z-Wave Programmable Thermostat
Bought this to integrate with my ADT Pulse system. Set it up as a GE Thermostat and it worked just like a charm. I have an older heating system, so there is no power to the thermostat. The battery powered version was perfect. This guy works just fine-minus a bit of lag, but I suppose that's to be expected. Wouldn't be surprised if it's actually my network slowing down communication. FYI-the lag is probably 3-5 seconds from when I input a change from the ADT iPhone app. Perhaps that's just relative...Honest reviews on 2gig Z-STAT Z-Wave Programmable Thermostat
I bought this tstat a few days before Christmas , and installed it over the holidays. At first I had some difficulty working the set up and I was leary of the reviews that showed this device to be a battery hog. To install this unit without the C wire was no problem, it comes with decals that you can mark the wires with when its apart. I got this installed and proceded to program it as outlined in the directions that it came with. After not much luck and almost ready to give up, I realized that there was a smaller insert of instructions that came with the Z wave radio module on this t stat. After carefully reading this I realized that this t stat is very versatile. It can be used as a stand alone programmable t stat that works off the internal clock on it, it can also be fitted for 2 types of radios, the Z wave and the wifi radio.After reading the extra insert instructions, I then realized that the t stat needed to be placed in wireless mode which hides the clock and some other displays on the face of unit. This was done by holding down the program button for 12 seconds, and then linking the z wave controller to the t stat. Once that was done I went to z wave controller, did a network heal, and proceeded to program in scenes. I am happy to report that all works as intended now and that a month into usage the batteries are still holding at 90%. The t stat can be operated in total darkness if needed, just lightly touch the screen and it lights up really bright and stays on for about 3 to 4 seconds after. I also tested the notifications feature and it works flawlessly. This unit is highly recommended and it looks like there have been some improvements over the first models prior to this one.
Find helpful customer reviews and review ratings for 2gig Z-STAT Z-Wave Programmable Thermostat
This was super easy to install. It quickly synced to my Vera2 and was instantly controllable. It has a big screen that is easy to read and control.For me, I needed ones that run on batteries as I do not have a 24V Common wire coming from my boiler to power it. This was it. I have three installed, two on radiant heat floors and one on forced hot air from a heat exchanger (from the boiler).
Will save me LOADS of $$ on propane.
Thursday, July 3, 2014
Reviews of Lasko 6410 Designer Series Oscillating Ceramic Heater
I started out with a little Holmes heater that was $5 cheaper that i got from wal-mart, but the thing was horrible, took forever to heat up a little room even.
I was skeptical of something that looked decent, and assumed it wouldn't perform all that great... but boy was i surprised.
Heats up real quick, nice auto temp set of 60, 65, 70, 75, 80, 85, and 'Max'.. along with manual settings, and oscillating that creates no more noise than the heater does, which is minimal for a space heater. Also has 4, 2, and 1 hr timers on it.
Only downsides, it beeps loud like a microwave with every button you touch, which gets annoying, and it would be nice if they made space heaters with 24 hour timers on them, to plan heating for when i wake up, but none of the kind exist.
Great buy, i think it was 40ish from wal-mart, very happy with it.
The reasons I got this one instead is that for me personally, I found the remote unnecessary and never used it.
This one heats just as well as the Lasko Tower with Remote, takes up less space, more attractive design and cost less.
Many people have ask questions regarding increase in electric bill. I have found that if you do not use the oscillating function you will not see much of an increase in your electric bill.
But with using the oscillating function you will see a bigger increase in electric bill. Not sure why it cost so much more to oscillate but that has been my experience.
Basically when running this heater my gas bill has decreased by 70.00 and electric has increased 20.00.
So overall it saves me about 50.00/month. But it not only saves me money every month it also increases the temperature in my home to a nice, toasty, comfortable level without the fear of a HUGE gas bill.
Just remember, nothing can replace a little weather stripping around your doors/windows and sealing off drafty spots to keep the warm in and cold out.
But Lasko heaters are a great and dependable product that will help increase the temperature inside your home at a minimal cost. Ceramic heaters cost less to run that regular electric heaters, always get ceramic.
UPDATE: 12/26/2010 Since the cold weather is kicking in and people will be looking for new space heaters I wanted to update this review.
This product is still working great but the one problem I have found with it compared to the Lasko Tower I did own is this.......Being in the south, we have no basements, therefore from the floor up to about your knees, the temperature is always colder. Because this heater is smaller in height than the Lasko Tower even if the temperature in the house is at 70, if I set the heater at 70, it wont shut off because it doesnt realize the temp above it is warmer. The Lasko tower heater due to it being taller would adjust better to the rest of the temperature in the house and shut off. So I have to set this one at 65 and when the house reaches 70 it will then shut off.
So if you live in a home with no basement, this is something to keep in mind.
My next heater will be the Lasko Tower with Digital display.
I like this one, it looks good but I liked the Lasko Tower more because it worked better for my personal situation.
If you have a basement this is not a problem you will probably experience. But for those of you who live in the South, you know what I mean and its something you may want to consider when purchasing.
Also DO NOT use this with an extension cord. It will heat up the extension cord to potentially unsafe levels.
Here is what I LOVE about this heater:
* Design it is nice to have something that it attractive sitting in your living room, rather than a plain white or silver tower. Plus, it's fairly small and lightweight, and so it's easy to take from room to room.
* Thermostat this is my absolute favorite part of it. I just set it to the temp I want my room kept, and it will turn itself on and off as needed. I use this in my bedroom at night...it's wonderful!
* Low/high sometimes I just want a little heat near my feet while I'm working at my desk, and I don't want to run it at full 1,500 watts, so it's nice that it has a lower-energy 900 watt setting.
* Quiet, oscillating fan this heater is less noisy than most fans or air purifiers...it's a very quiet hum...and the oscillation is nice because it helps heat a wider area more quickly.
* Price you have to love something that keeps you warm wherever you are, for just $40, compared to gigantic winter heating bills!
I am absolutely THRILLED with my purchase of this heater and highly recommend it!
This heater looks great and heats up a room quickly(25' X 15' < 1 hour) its big and tall
great for large rooms
CONS
not so great for small bedrooms (hard to regulate temperature)
when u first plug it in you need to press like 5 different buttons to get the settings u want... annoying loud BEEP every time you press a button
only oscillates 90 degrees.
not a true thermostat... more like a glorified timer
This heater performs as expected. We have the item in our master bedroom due to a redesign of the space, in which the heating vent was moved near the door which allows the heat to escape to the return vents in the hall before it circulates the room. We're in Atlanta, and the nights get pretty cold during the winter months.
The room is 12 x 16, and with the doors (to the hallway and master bath) closed, the room gets plenty cozy with the space heater on high. On low (which is just a lower heat setting with the same fan speed), it gets there, but just not as quickly. However, with the doors open, the area immediately in front of the heater gets warm, but the rest of the room barely feels like its even on. In short, if you're using this to keep a medium sized, closed area warm (just about any bedroom) then this space heater will definitely get the job done and is worth every penny. But if your 'space' is a small part of a large space, don't expect it to even keep the 'area' warm. We need a space heater for a finished basement sitting area, and don't plan on purchasing this one again.
Here are my pros, cons, and comments on items other people have mentioned:
PROS
Design does fit into typical room decor. Doesn't stand out like typical space heaters do.
Oscillation is a nice feature. Its true that it doesn't turn much, but it turns enough to cover a good area.
Timer is a great feature. All space heaters should be equipped with this.
The unit itself does not get warm, which is a plus. Makes for easy handling, even immediately after use.
Radiates good amount of heat for such a small unit.
CONS
Thermostat doesn't seem to be sensitive or accurate. Setting it to 65 degrees (with a digital thermometer in the room), the unit didn't shut off until ambient temp was 73 degrees, and turned back on at 68 degrees.
Again, gets a medium-size, closed space warm, but anything more than that is asking too much of the unit.
Unit needs to be on to maintain warmth for longer periods.
Even though I don't expect it to keep a large area warm, I would expect it to keep a small portion of a large area warm based on its location. However, it doesn't stand up to that test (Why? I am not sure). If the area is not closed off, you might as well try to keep warm by burning a candle next to you instead.
COMMENTS
Some reviews complain about the power cord getting warm, and even hot to the touch. We have run the unit for about 3 continuous hours, and after that, the cord is relatively warm, but not alarmingly warm. I can't attest to how warm it would be after 5+ hours of continuous use, but I don't consider that to be 'normal' use either. If its a major concern, shut the unit off and unplug it for a few minutes here and there, or set the thermostat lower so it shuts off more frequently during extended use.
The fan noise generated is really white background noise. My fiance is a light sleeper, and it doesn't seem to bother her at all. Its no noisier than the heat coming from our vents. Not sure why some reviewers have an issue with this.
I was skeptical of something that looked decent, and assumed it wouldn't perform all that great... but boy was i surprised.
Heats up real quick, nice auto temp set of 60, 65, 70, 75, 80, 85, and 'Max'.. along with manual settings, and oscillating that creates no more noise than the heater does, which is minimal for a space heater. Also has 4, 2, and 1 hr timers on it.
Only downsides, it beeps loud like a microwave with every button you touch, which gets annoying, and it would be nice if they made space heaters with 24 hour timers on them, to plan heating for when i wake up, but none of the kind exist.
Great buy, i think it was 40ish from wal-mart, very happy with it.
Click Here For Most Helpful Customer Reviews >>
Very happy with this purchase. I previously owned the Lasko 755320 Tower Heater with Remote. That one lasted about 5 years and when it was time to replace it, I purchased this one, Lakso 6410.The reasons I got this one instead is that for me personally, I found the remote unnecessary and never used it.
This one heats just as well as the Lasko Tower with Remote, takes up less space, more attractive design and cost less.
Many people have ask questions regarding increase in electric bill. I have found that if you do not use the oscillating function you will not see much of an increase in your electric bill.
But with using the oscillating function you will see a bigger increase in electric bill. Not sure why it cost so much more to oscillate but that has been my experience.
Basically when running this heater my gas bill has decreased by 70.00 and electric has increased 20.00.
So overall it saves me about 50.00/month. But it not only saves me money every month it also increases the temperature in my home to a nice, toasty, comfortable level without the fear of a HUGE gas bill.
Just remember, nothing can replace a little weather stripping around your doors/windows and sealing off drafty spots to keep the warm in and cold out.
But Lasko heaters are a great and dependable product that will help increase the temperature inside your home at a minimal cost. Ceramic heaters cost less to run that regular electric heaters, always get ceramic.
UPDATE: 12/26/2010 Since the cold weather is kicking in and people will be looking for new space heaters I wanted to update this review.
This product is still working great but the one problem I have found with it compared to the Lasko Tower I did own is this.......Being in the south, we have no basements, therefore from the floor up to about your knees, the temperature is always colder. Because this heater is smaller in height than the Lasko Tower even if the temperature in the house is at 70, if I set the heater at 70, it wont shut off because it doesnt realize the temp above it is warmer. The Lasko tower heater due to it being taller would adjust better to the rest of the temperature in the house and shut off. So I have to set this one at 65 and when the house reaches 70 it will then shut off.
So if you live in a home with no basement, this is something to keep in mind.
My next heater will be the Lasko Tower with Digital display.
I like this one, it looks good but I liked the Lasko Tower more because it worked better for my personal situation.
If you have a basement this is not a problem you will probably experience. But for those of you who live in the South, you know what I mean and its something you may want to consider when purchasing.
Also DO NOT use this with an extension cord. It will heat up the extension cord to potentially unsafe levels.
Best Deals on Lasko 6410 Designer Series Oscillating Ceramic Heater
After receiving a gas bills of around $250 for two months in a row (and I live in Houston, TX, not in some ultra-cold climate), I decided I needed to do something about the drafts in my house besides just turning up the heat. I researched a number of small electric heaters and finally decided on this one. I have now been using it for about 3 weeks, and even though I haven't received my new gas bill, I am quite sure it will be substantially lower because I've been able to keep the house thermostat low while just using this heater to warm the room I'm in.Here is what I LOVE about this heater:
* Design it is nice to have something that it attractive sitting in your living room, rather than a plain white or silver tower. Plus, it's fairly small and lightweight, and so it's easy to take from room to room.
* Thermostat this is my absolute favorite part of it. I just set it to the temp I want my room kept, and it will turn itself on and off as needed. I use this in my bedroom at night...it's wonderful!
* Low/high sometimes I just want a little heat near my feet while I'm working at my desk, and I don't want to run it at full 1,500 watts, so it's nice that it has a lower-energy 900 watt setting.
* Quiet, oscillating fan this heater is less noisy than most fans or air purifiers...it's a very quiet hum...and the oscillation is nice because it helps heat a wider area more quickly.
* Price you have to love something that keeps you warm wherever you are, for just $40, compared to gigantic winter heating bills!
I am absolutely THRILLED with my purchase of this heater and highly recommend it!
Honest reviews on Lasko 6410 Designer Series Oscillating Ceramic Heater
PROSThis heater looks great and heats up a room quickly(25' X 15' < 1 hour) its big and tall
great for large rooms
CONS
not so great for small bedrooms (hard to regulate temperature)
when u first plug it in you need to press like 5 different buttons to get the settings u want... annoying loud BEEP every time you press a button
only oscillates 90 degrees.
not a true thermostat... more like a glorified timer
Find helpful customer reviews and review ratings for Lasko 6410 Designer Series Oscillating Ceramic Heater
To start, I must say that my TRUE rating is for 3.5 stars...the heater is just not good enough for me to round up to 4.This heater performs as expected. We have the item in our master bedroom due to a redesign of the space, in which the heating vent was moved near the door which allows the heat to escape to the return vents in the hall before it circulates the room. We're in Atlanta, and the nights get pretty cold during the winter months.
The room is 12 x 16, and with the doors (to the hallway and master bath) closed, the room gets plenty cozy with the space heater on high. On low (which is just a lower heat setting with the same fan speed), it gets there, but just not as quickly. However, with the doors open, the area immediately in front of the heater gets warm, but the rest of the room barely feels like its even on. In short, if you're using this to keep a medium sized, closed area warm (just about any bedroom) then this space heater will definitely get the job done and is worth every penny. But if your 'space' is a small part of a large space, don't expect it to even keep the 'area' warm. We need a space heater for a finished basement sitting area, and don't plan on purchasing this one again.
Here are my pros, cons, and comments on items other people have mentioned:
PROS
Design does fit into typical room decor. Doesn't stand out like typical space heaters do.
Oscillation is a nice feature. Its true that it doesn't turn much, but it turns enough to cover a good area.
Timer is a great feature. All space heaters should be equipped with this.
The unit itself does not get warm, which is a plus. Makes for easy handling, even immediately after use.
Radiates good amount of heat for such a small unit.
CONS
Thermostat doesn't seem to be sensitive or accurate. Setting it to 65 degrees (with a digital thermometer in the room), the unit didn't shut off until ambient temp was 73 degrees, and turned back on at 68 degrees.
Again, gets a medium-size, closed space warm, but anything more than that is asking too much of the unit.
Unit needs to be on to maintain warmth for longer periods.
Even though I don't expect it to keep a large area warm, I would expect it to keep a small portion of a large area warm based on its location. However, it doesn't stand up to that test (Why? I am not sure). If the area is not closed off, you might as well try to keep warm by burning a candle next to you instead.
COMMENTS
Some reviews complain about the power cord getting warm, and even hot to the touch. We have run the unit for about 3 continuous hours, and after that, the cord is relatively warm, but not alarmingly warm. I can't attest to how warm it would be after 5+ hours of continuous use, but I don't consider that to be 'normal' use either. If its a major concern, shut the unit off and unplug it for a few minutes here and there, or set the thermostat lower so it shuts off more frequently during extended use.
The fan noise generated is really white background noise. My fiance is a light sleeper, and it doesn't seem to bother her at all. Its no noisier than the heat coming from our vents. Not sure why some reviewers have an issue with this.
Saturday, May 10, 2014
Discount White Rodgers 1F79-111 70 series heat pump thermostat
Good easy to use digital non-programable thermostat. Shows room temp and Set Point temp clearly. Has lighted background to be able to read it easy in the dark. It uses 2 batteries for backup, so you don't lose the programing in case power goes off, but it normally runs on the 24v power from the AC unit. Not complicated & easy to use. Perfect for elderly or technology challenged individuals that don't need the programming features. This is a 2 stage thermostat, so it works with a heat pump to put it in cooling or heating mode, and the 2nd stage will turn on the electric heat strip or Emergency Heat if the outside unit can't produce enough heating. It is easy to hook up it you know what you are doing, if you don't, then get a tech to install it.
Saturday, May 3, 2014
Review of Honeywell YTHM5421R1002 Prestige IAQ 2.0 EIM Module Kit
I love the Item. But I do recommend you having it professionally installed by a Air conditioning guy if you can find a person that knows how to hook this up. I had a hard time finding someone.
Saturday, April 26, 2014
Reviews of PRO1 IAQ T905 Touchscreen Thermostat with Large Easy-to-Read Display
Customer Ratings: 
List Price: $186.30
Sale Price: $111.78
Today's Bonus: 40% Off

I've suffered with a kludgy Lux 500 for years awkward, tedious programming small buttons small display and finally replaced it. Considered Honeywell because it's commonly available, but didn't like Honeywell's policy of not honoring warranty unless installed by a licensed professional, and wasn't wild about other on-the-shelf local options. So I did a little research and stumbled upon this thermostat and ordered.
I love it! Granted, it has only been installed for a few days, and I'm comparing it to the dreadful Lux 500, but programming is so simple, and I like that for filter replacement it uses number of hours of operation instead of number of days. Who cares how many days if the furnace isn't operating? A big reason I chose this one is the programmability of temp swing before the furnace turns on, because it means I can adjust so furnace neither cycles endlessly, nor has too big a temp swing.
Unit looks clean on the wall, and can take off for programming if needed.
Very pleased. If I run into any issues, I'll return here to downgrade, but if I'm not back, this thermostat has remained a hit with me.
During the recent hurricane induced power outage, the dozen surges that the house suffered fried all 3 of my themostats. I bought this an 2 lower models Honeywells. This was slated for the main floor but the wife thought the unit looked too big. That however is the charm of this thing. Big and easy to read. Easy to set. Easy, easy easy all the way round.
As far as the touch on this unit, it responds to an light or hard touch (my previous unit was a major pain, you had to have JUST the right touch to get it to work).
One more thing the button on the top turns the light on so you can work the unit in the dark without have to press on the touch surface. All in all a very well thought out little (big) themostat.
List Price: $186.30
Sale Price: $111.78
Today's Bonus: 40% Off
I've suffered with a kludgy Lux 500 for years awkward, tedious programming small buttons small display and finally replaced it. Considered Honeywell because it's commonly available, but didn't like Honeywell's policy of not honoring warranty unless installed by a licensed professional, and wasn't wild about other on-the-shelf local options. So I did a little research and stumbled upon this thermostat and ordered.
I love it! Granted, it has only been installed for a few days, and I'm comparing it to the dreadful Lux 500, but programming is so simple, and I like that for filter replacement it uses number of hours of operation instead of number of days. Who cares how many days if the furnace isn't operating? A big reason I chose this one is the programmability of temp swing before the furnace turns on, because it means I can adjust so furnace neither cycles endlessly, nor has too big a temp swing.
Unit looks clean on the wall, and can take off for programming if needed.
Very pleased. If I run into any issues, I'll return here to downgrade, but if I'm not back, this thermostat has remained a hit with me.
Click Here For Most Helpful Customer Reviews >>
I was looking for a stat with a more modern look than the traditional Honeywell Home Depot stat that was also very user friendly. This stat is everything I was looking for. Very nice looking and very intuitive to use.Best Deals on PRO1 IAQ T905 Touchscreen Thermostat with Large Easy-to-Read Display
This was a great unit looks great but in the listing and on the box it states it has a programmable fan feature after calling pro1iaq they stated it does not have a programmable fan feature. I love this thermostat and am sad to send it back but it was shutting the fan and compressor at the same time and the fan needs to stay on for 30-60 seconds to take the condensation off the airhandler otherwise it will rust in no time.probably more suited for heat application I gave it a 3 because although all the other function work great a 20 dollar thermostat does not shut off the compressor and fan at the same timeHonest reviews on PRO1 IAQ T905 Touchscreen Thermostat with Large Easy-to-Read Display
Over the years I have had lots of themostats. Mainly programable, start with the early Honeywell simple set-back to the more complex mechanical pin type for more on off combinations. I have tried many brands and although I preferred the Honeywells they are not the leader they were when these were mechanical.During the recent hurricane induced power outage, the dozen surges that the house suffered fried all 3 of my themostats. I bought this an 2 lower models Honeywells. This was slated for the main floor but the wife thought the unit looked too big. That however is the charm of this thing. Big and easy to read. Easy to set. Easy, easy easy all the way round.
As far as the touch on this unit, it responds to an light or hard touch (my previous unit was a major pain, you had to have JUST the right touch to get it to work).
One more thing the button on the top turns the light on so you can work the unit in the dark without have to press on the touch surface. All in all a very well thought out little (big) themostat.
Find helpful customer reviews and review ratings for PRO1 IAQ T905 Touchscreen Thermostat with Large Easy-to-Read Display
It only works if you put rc wire in heat or cool. Jumper doesn't help. Waste of good earned moneyMonday, March 24, 2014
Discount Holmes HFH111T-U Desktop Heater Fan with Comfort Control Thermostat
Customer Ratings: 
List Price: $39.76
Sale Price: $21.99
Today's Bonus: 45% Off

Living in the snow belt of NY state and using space heaters as the main source of heat in my home for the last few winters, I know a thing or two about them. I haven't been able to afford a heating oil delivery, so naturally, I turned to electric heat.
My first heater purchase was a highly rated $75 radiant heater which was alright, except it was pretty darn big, and the heat it provided seemed so-so for the price I paid. The next one was a $50 bionaire heater which was still rather large and so-so for the price I paid.
Being on a budget, my next two heaters were this particular one. I love how small they are, and it can get downright HOT, even on the coldest nights if you don't have it on medium/low. I had them running almost on a constant basis for 6 months, 2 years running, and this is the third year and have had no issues with them quitting on me. I did go and buy them from a physical store, so maybe bad handling was the case with others who had a problem with it.
Anyway, on the subject of electric bills, mine were pretty high. A winter of electric bills was pretty much equivalent to a winters worth of heating oil, but at least I didn't have to pay that in a lump sum, up front.
Both have a single fan speed, and a choice of fan only, low heat, and high heat.
Both have a thermostat which will turn the unit off once the desired temperature is reached.
Both have internal over temperature protection which needs to be reset by unplugging the device and letting things cool down.
LASKO PLUS
The light is lit if the unit is plugged in so you know if it's plugged in by a look only. I want to leave space heaters unplugged when I'm not around and this makes it easy to tell.
Quieter than HOLMES: ~55DB vs the HOLMES 60DB
Seems more efficient at heating a given volume of air. Passing my hand in front of either unit at about 18 inches away with heat on high, my hand got rather hot with the LASKO which seemed to have good even hot air distribution over an arc +/-20 degrees of center, but the HOLMES air distribution seemed uneven with more air going to one side, and my hand never got uncomfortable.
HOLMES PLUS
Simpler packaging: no internal packaging.... LASKO had: 2 pieces of pressed formed cardboard, plastic wrapping and tape to recycle.
The light is lit once the switch is no longer in the OFF position, even if the thermostat has caused the fan to turn off. Thus you can look at the light to know that the heater *may* be on. With the LASKO you need to look at the switch to make sure it's going to stay off.
More sensitive thermostat. It takes only a 5 or 10 degree rotation to get the thermostat to go on or off, while the LASKO took about 30 degrees.
May very well move more air for the noise.
Tip over protection. It has a weight on a switch. If the unit leaves vertical by more then 60 degrees tipping front or back, the unit will shut off.
BOTTOM LINE
If no kids or cats I'd recommend LASKO. If tip over is a concern, the the HOLMES is an acceptable low cost solution.
The LASKO will go in my office where I will appreciate the quiet and the more direct heat, and the HOMES will in the bathroom where the noise and uneven direct heating is less of an issue.
The primary reason for my negative review, though, is that I think this unit is downright dangerous. I used this unit on the "low" setting for about 12 mos (used only in winter months). It worked fine. Today, for the first time, I used it on the high setting. It had been on for about one hour, when one of the internal supports for the heating coils collapsed. This caused the coils to collapse into the metal fan, which then caused a short. A huge flame shot out of the front of the unit and turned the plastic housing black. If I hadn't been sitting there to unplug it immediately who knows what might have happened. This unit has basically never been moved, so the weakness in the support is not due to operator misuse. It is likely a manufacturing and/or design issue.
Very poor design. It's cheap for a reason. Don't risk your safety for a few bucks.
List Price: $39.76
Sale Price: $21.99
Today's Bonus: 45% Off
Living in the snow belt of NY state and using space heaters as the main source of heat in my home for the last few winters, I know a thing or two about them. I haven't been able to afford a heating oil delivery, so naturally, I turned to electric heat.
My first heater purchase was a highly rated $75 radiant heater which was alright, except it was pretty darn big, and the heat it provided seemed so-so for the price I paid. The next one was a $50 bionaire heater which was still rather large and so-so for the price I paid.
Being on a budget, my next two heaters were this particular one. I love how small they are, and it can get downright HOT, even on the coldest nights if you don't have it on medium/low. I had them running almost on a constant basis for 6 months, 2 years running, and this is the third year and have had no issues with them quitting on me. I did go and buy them from a physical store, so maybe bad handling was the case with others who had a problem with it.
Anyway, on the subject of electric bills, mine were pretty high. A winter of electric bills was pretty much equivalent to a winters worth of heating oil, but at least I didn't have to pay that in a lump sum, up front.
Click Here For Most Helpful Customer Reviews >>
I needed a couple of new inexpensive space heaters so I decided to do a bake off between this LASKO 754200 and the HOLMES HFH111T.Both have a single fan speed, and a choice of fan only, low heat, and high heat.
Both have a thermostat which will turn the unit off once the desired temperature is reached.
Both have internal over temperature protection which needs to be reset by unplugging the device and letting things cool down.
LASKO PLUS
The light is lit if the unit is plugged in so you know if it's plugged in by a look only. I want to leave space heaters unplugged when I'm not around and this makes it easy to tell.
Quieter than HOLMES: ~55DB vs the HOLMES 60DB
Seems more efficient at heating a given volume of air. Passing my hand in front of either unit at about 18 inches away with heat on high, my hand got rather hot with the LASKO which seemed to have good even hot air distribution over an arc +/-20 degrees of center, but the HOLMES air distribution seemed uneven with more air going to one side, and my hand never got uncomfortable.
HOLMES PLUS
Simpler packaging: no internal packaging.... LASKO had: 2 pieces of pressed formed cardboard, plastic wrapping and tape to recycle.
The light is lit once the switch is no longer in the OFF position, even if the thermostat has caused the fan to turn off. Thus you can look at the light to know that the heater *may* be on. With the LASKO you need to look at the switch to make sure it's going to stay off.
More sensitive thermostat. It takes only a 5 or 10 degree rotation to get the thermostat to go on or off, while the LASKO took about 30 degrees.
May very well move more air for the noise.
Tip over protection. It has a weight on a switch. If the unit leaves vertical by more then 60 degrees tipping front or back, the unit will shut off.
BOTTOM LINE
If no kids or cats I'd recommend LASKO. If tip over is a concern, the the HOLMES is an acceptable low cost solution.
The LASKO will go in my office where I will appreciate the quiet and the more direct heat, and the HOMES will in the bathroom where the noise and uneven direct heating is less of an issue.
Best Deals on Holmes HFH111T-U Desktop Heater Fan with Comfort Control Thermostat
This heater is not a bad heater if you don't mind the noise. We bought it for our baby's room and took it back next day. When the heater goes on it is just too noisy so our baby would wake up. It is cheap, it works but it is awful noisy.Honest reviews on Holmes HFH111T-U Desktop Heater Fan with Comfort Control Thermostat
I bought this heater 2 years ago. For my laundry room to keep my dog and her 10 puppies warm through the cold winter. Warmed the room within 10 mins and if kept on high it was too DARN HOT! Best thing about this heater if the pups ever knoked it over it shut off. After two years of having this heater it hasn't failed me yet. And it has been thrown knocked over and stomped on by my dogs. Very Harty heater does a great job! Of and my laundry room has a dog door and windows all around so not very insulated. I would run it 6 hours a day every day and didn't even see a change in the pge billFind helpful customer reviews and review ratings for Holmes HFH111T-U Desktop Heater Fan with Comfort Control Thermostat
First of all, I agree with prior reviewers that this unit is very noisy vs. other forced air space heaters.The primary reason for my negative review, though, is that I think this unit is downright dangerous. I used this unit on the "low" setting for about 12 mos (used only in winter months). It worked fine. Today, for the first time, I used it on the high setting. It had been on for about one hour, when one of the internal supports for the heating coils collapsed. This caused the coils to collapse into the metal fan, which then caused a short. A huge flame shot out of the front of the unit and turned the plastic housing black. If I hadn't been sitting there to unplug it immediately who knows what might have happened. This unit has basically never been moved, so the weakness in the support is not due to operator misuse. It is likely a manufacturing and/or design issue.
Very poor design. It's cheap for a reason. Don't risk your safety for a few bucks.
Friday, January 10, 2014
Review of 30" Digital Crmc Pdstl Heater
Customer Ratings: 
List Price: $71.99
Sale Price: $50.71
Today's Bonus: 30% Off

I researched for a long time before purchasing this Lasko heater last winter. I bought one and ran a test for a month to see if A)the heater would heat up a rather large living room, and B)whether my electric bill would go down. So, with my heat pump thermostat set on 65, we used this unit in our living area all last winter. Our electric bill was drastically lower! In fact, I liked the heater so much that I bought my daughter one, just to help her save money too.
Best points on the heater are the remote control, the oscillation, and the pedestal which better evenly distributes the heat. We bought 2 more smaller Lasko heaters from Amazon to basically heat up every room where we need heat this winter...and I guarantee that our electric bill will still be lower than merely using the heat pump alone. I had no idea that the heat pump ate up so much power.
Great heater!
The digital remote is great so you can see the temp without having to walk across the room. The timer feature can be used in automatic mode as well so I set the temperature and have it shut off after a couple hours.
List Price: $71.99
Sale Price: $50.71
Today's Bonus: 30% Off
I researched for a long time before purchasing this Lasko heater last winter. I bought one and ran a test for a month to see if A)the heater would heat up a rather large living room, and B)whether my electric bill would go down. So, with my heat pump thermostat set on 65, we used this unit in our living area all last winter. Our electric bill was drastically lower! In fact, I liked the heater so much that I bought my daughter one, just to help her save money too.
Best points on the heater are the remote control, the oscillation, and the pedestal which better evenly distributes the heat. We bought 2 more smaller Lasko heaters from Amazon to basically heat up every room where we need heat this winter...and I guarantee that our electric bill will still be lower than merely using the heat pump alone. I had no idea that the heat pump ate up so much power.
Great heater!
Click Here For Most Helpful Customer Reviews >>
Did not heat as well as we thought it would. The heater kept cutting off before it reached the temperature we set for.Best Deals on 30" Digital Crmc Pdstl Heater
works great for a room and not having to crank up the central air, the auto mode works great although recommend using ceiling fan to circulate air or you get hot spotsHonest reviews on 30" Digital Crmc Pdstl Heater
I did a lot of research and shopping around for a space heater and was not disappointed with this. It's provided excellent heat for a large room.The digital remote is great so you can see the temp without having to walk across the room. The timer feature can be used in automatic mode as well so I set the temperature and have it shut off after a couple hours.
Find helpful customer reviews and review ratings for 30" Digital Crmc Pdstl Heater
Nice heater. Easy to assemble. The remote is nice too. It has a digital temperature display. Timer, height and decent power, given the price.Saturday, December 21, 2013
Lifesmart LSPP1500-6HOM 1500 Watt Infrared Quartz Heater 6 Element Review
I wish reviewers would state how long they have owned the product. I waited to review because, of course, a product that breaks less than 3 months in doesn't deserve a 5 star rating. I will come back and update this review when I get more info on how it can be fixed and how much of a hassle that will be. It is too big and heavy to send in for repair.
I really liked it at first. It's nice looking, and has rollers. It was ideal for fall heating, and as a supplement to the furnace in really cold weather. I am using my furnace way less. It has added bonuses of a timer delay start (so can have it go on shortly before I get up) and a timer delay off.
However one week short of having had it 3 months (and not in the dead of winter, though we had a cool autumn) it suddenly turned off. I cleaned the filter and thought I'd be all set, but no. It will run for a while and then turn off. So I'm back to using my mini heaters, and am waiting to hear from the manufacturer.
Update as of 1/8/13: Forget about warranty protection. The manufacturer is impossible to get in touch with.
It should also be noted that the description provided here is incorrectno, you cannot plug it into any 120V outlet.. it needs it's own 15 amp circuit. You might have several outlets that are on the same circuit. There is only one place downstairs in my house where I can give it it's own circuit, so this is something to check out before you buy.
Update as of 1/10/13: After filing a claim with Amazon that was just denied (as it was a third party seller) I finally received a call back from the manufacturer, and they said they will ship me parts so I can fix myself! (The unit itself says: "Caution: Do not open. No user-serviceable parts inside".) I'm not optimistic but that's the update, and I am shopping for a new little heater..like the Lasko or DeLonghi. I'm sad this one didn't work out; I really liked it for 2 1/2 months!
Keeps a room comfortable during cold weather.
Easy to roll from one spot to the next.
A little noisy during sleep if you hone in on it.
I really liked it at first. It's nice looking, and has rollers. It was ideal for fall heating, and as a supplement to the furnace in really cold weather. I am using my furnace way less. It has added bonuses of a timer delay start (so can have it go on shortly before I get up) and a timer delay off.
However one week short of having had it 3 months (and not in the dead of winter, though we had a cool autumn) it suddenly turned off. I cleaned the filter and thought I'd be all set, but no. It will run for a while and then turn off. So I'm back to using my mini heaters, and am waiting to hear from the manufacturer.
Update as of 1/8/13: Forget about warranty protection. The manufacturer is impossible to get in touch with.
It should also be noted that the description provided here is incorrectno, you cannot plug it into any 120V outlet.. it needs it's own 15 amp circuit. You might have several outlets that are on the same circuit. There is only one place downstairs in my house where I can give it it's own circuit, so this is something to check out before you buy.
Update as of 1/10/13: After filing a claim with Amazon that was just denied (as it was a third party seller) I finally received a call back from the manufacturer, and they said they will ship me parts so I can fix myself! (The unit itself says: "Caution: Do not open. No user-serviceable parts inside".) I'm not optimistic but that's the update, and I am shopping for a new little heater..like the Lasko or DeLonghi. I'm sad this one didn't work out; I really liked it for 2 1/2 months!
Click Here For Most Helpful Customer Reviews >>
Works great and very quite. Looks great and safe. Really helps for that corner room that need an extra help for heat. If you live in a mild climate area this might be all you need. Love it.Best Deals on Lifesmart LSPP1500-6HOM 1500 Watt Infrared Quartz Heater 6 Element
We have a sizable room and attached kitchen where we spend most of our time. This unit keeps the rooms at a level temp even with the patio door opening and closing several times a day. It is very quiet and just sits there doing its job.Honest reviews on Lifesmart LSPP1500-6HOM 1500 Watt Infrared Quartz Heater 6 Element
Nice looking and controlled warm air booster.Keeps a room comfortable during cold weather.
Easy to roll from one spot to the next.
A little noisy during sleep if you hone in on it.
Find helpful customer reviews and review ratings for Lifesmart LSPP1500-6HOM 1500 Watt Infrared Quartz Heater 6 Element
worked fine for three weeks then would quit after 5 min running, don't know what they will do yet to fix itSaturday, November 16, 2013
Reviews of VIP3000 Talking Thermostat
Customer Ratings: 
List Price: $219.95
Sale Price: $194.94
Today's Bonus: 11% Off

worked well, larger buttons would be nice.voice from thermostat was easy to understand. works well for vision impaired, maybe not so well for totally blind. It will handle muti stage systems where other similar kinds won't.
List Price: $219.95
Sale Price: $194.94
Today's Bonus: 11% Off
worked well, larger buttons would be nice.voice from thermostat was easy to understand. works well for vision impaired, maybe not so well for totally blind. It will handle muti stage systems where other similar kinds won't.
Subscribe to:
Posts (Atom)