Showing posts with label 3m wifi thermostat. Show all posts
Showing posts with label 3m wifi thermostat. Show all posts

Monday, February 9, 2015

Masterbuilt Butterball Indoor Gen III Electric Fryer Cooker Reviews

Masterbuilt 23011114 Butterball Indoor Gen III Electric Fryer Cooker Extra Large Capacity
Customer Ratings: 4.5 stars
List Price: $209.95
Sale Price: $159.00
Today's Bonus: 24% Off
Buy Now

Great investment. We were skeptical but this was the best and juiciest turkey we have ever had. We fixed an 11 lb test turkey and it was gone in 2 days (just two of us, and I usually don't like turkey). Then we fixed an 18 lb for Thanksgiving with this and fixed another 12 lb in the oven the usual way and we ended up with just about the whole oven turkey only for leftovers (10 people).

Click Here For Most Helpful Customer Reviews >>

I selected the Masterbuilt/Butterball Oil-Free Electric Turkey Fryer for three primary reasons. First, since my granddaughter is allergic to peanuts, I could not fry a turkey in peanut oil. Second, I wanted a way to capture drippings to make traditional-style turkey gravy, and third, I liked the idea of being able to roast a turkey at the rate of 10 minutes per pound. I started with a 10-lb. Butterball test turkey and vacillated as to whether to inject it with a butter-flavored marinade or leave it unflavored. I did not want Creole flavoring, and I'd read that if the turkey isn't injected with the proper quantities of marinade in the proper places, the marinade can pool and cause intense flavor in some areas of the meat. I decided to try roasting it without any seasoning at all and see what happened. I did nothing to the turkey except dry it thoroughly with paper towels and bind the wings next to the breast with a silicone band. We were very pleased with the outcome. The turkey cooked in exactly 100 minutes, and it was moist, juicy and delicious. On Thanksgiving, I roasted a 12-lb. Butterball turkey and everyone raved. Once again, it cooked in exactly 120 minutes. This time I oiled the turkey inside and out with corn oil mixed with minced fresh rosemary. I also applied a small amount of poultry rub to the skin.

For others who buy this product--which really isn't a fryer but a roaster--I can offer a couple of pointers. The instructions call for preheating the fryer, but it doesn't mention that preheating to the "high" setting takes a long time. On Thanksgiving, I preheated the unit for a full hour before putting in the turkey. Also, the turkey "basket" that fits into the unit is a cone shape with hole in the bottom for the drippings to drain into the cup. The instructions don't mention that when the user transports the cooked turkey in the basket from outdoors to indoors, it will leave a trail of drippings. On Thanksgiving, we solved the problem by placing the turkey basket into a cardboard box. Afterward we removed the turkey from the basket with silicone oven mitts.

Today I intend to order two Masterbuilt/Butterball Oil-Free Electric Turkey Fryers as gifts for dear friends, one who can never seem to get her turkey done and another who has only one oven. For both of them, preparation of Christmas dinner will be much easier and stress-free.

Best Deals on Masterbuilt Butterball Indoor Gen III Electric Fryer Cooker

The electric turkey fryer is a good choice if you don't want the mess or hazards of using oil for deep frying. For the money it does an okay job of doing nothing more than cooking your turkey and collecting the drippings. All in all, only buy this product if you want to make room in your oven or grill to cook somthing else at the same time. One good thing about this fryer though is the wood chip tray for smoking. It seems to impart good smoke into the meat. Perhaps this fryer will work better as a low temp smoker. Will try that next. So, in short, if you are looking for that deep fried crispiness and look...this won't give you that.

Honest reviews on Masterbuilt Butterball Indoor Gen III Electric Fryer Cooker

My bad that I got this the day BEFORE Thanksgiving so I had no chance to test before BOY, did I get lucky!! I made the best turkey in the history of man!! It was so great, in fact; we did a "do-over" two weeks later to prove it wasn't a fluke ... Nope! Was again perfect juicy & AMAZING!!

Brined the turkey the night before, put outside on my patio & just kept an eye on it. I cooked a 12.5 lbs turkey in 1.75 hours! Bottom has a cup to catch drippings so made perfect gravy. Crispy skin as if it had been fried but none of the oil mess to clean up. Clean up was super easy just washed the bucket & stand the turkey was in.

I highly recommend this product. Only thing to be aware of is that you will have NO LEFTOVERS because the turkey is so fabulous everybody takes it home with them!

Find helpful customer reviews and review ratings for Masterbuilt Butterball Indoor Gen III Electric Fryer Cooker

Brined my 16 pound turkey and also injected it with butter and chicken broth. Was the most evenly cooked and juiciest turkey I ever prepared. However, it takes a very long time to heat up and did not ever reach "HI" and turn off. Tried to heat it up to do another and after an hour, gave up. It was very cold outside, so will try again when not so cold, as really like the way the first turkey came out. I think the name "turkey fryer" is a misnomer, since there is no frying associated with it. Outdoor roaster would be more appropriate, in my humble opinion.

Buy Fom Amazon Now

Thursday, November 27, 2014

Discount Comfort Zone® Industrial Fan-Forced Ceiling Mount Utility

Comfort ZoneĀ® Industrial Fan-Forced Ceiling Mount Utility Heater CZ220
Customer Ratings: 5 stars
List Price: $249.99
Sale Price: Price Unavailable
Today's Bonus: 30% Off
Buy Now

I installed this today in my garage. This heater looks small, but it heated my garage ( 4776 sq ft ) in about 3 hrs. At first there was a smell of something burning. The smell lasted about 2 hrs and it was gone. So far I am very happy with this heater. Great price

Click Here For Most Helpful Customer Reviews >>

Tuesday, November 25, 2014

Reviews of 15 Gal Home Beer Brewing Kettle w/ Valve & Thermometer

15 Gal Home Beer Brewing Kettle w/ Valve & Thermometer
Customer Ratings: 5 stars
Buy Now
This is a great Kettle. Very sturdy with thick side walls and bottom. Nice and heavy. However, there is one thing I had an issue with. Not a deal breaker, but kind of misleading. The thermometer in the picture has makings that show different temps for different applications. Such as Mash, sparge, and protein rest. This is displayed in the second image that expands when you click on it. The actual thermometer has no such markings. Like I said, not a deal breaker, but I just don't like being mislead no matter how insignificant the details. Otherwise this is a great kettle. It arrived packaged in a box, inside another box. The weldless fittings came with extra gaskets and "O" rings. On some other pots that I looked at, the sidewalls of the pot where the handles were mounted would flex if I applied just a little bit of force. On this pot, nothing flexes. It's sturdy.

Click Here For Most Helpful Customer Reviews >>

I have done two 10 gallon bathes with this pot. I am amazed how heavy, sturdy and functional this pot is. I am not quite sure about the accuracy of the thermometer, so I use my own to stick in. A great pot at a great price. It is huge. Easy to clean and well recommended.

Best Deals on 15 Gal Home Beer Brewing Kettle w/ Valve & Thermometer

Its pretty heavy, but thats ok. It feels sturdy. Thermometer and valve work beautifully (don't forget to close the valve when draining wort into pot! I did, and was not a happy camper).

Only complaint is there are no volume/gallon marks. Would be perfect with that.

Honest reviews on 15 Gal Home Beer Brewing Kettle w/ Valve & Thermometer

My husband love this with the built in thermometer and spout. be careful though, it is large (think storage) and your burner needs to accommodate the bottom for good heating.

Find helpful customer reviews and review ratings for 15 Gal Home Beer Brewing Kettle w/ Valve & Thermometer

The seal was missing for the thermometer, but I had another one. I could not get either seal to stop leaking. I don't know if the hole was drilled too big or what, but it leaked through spigot and thermometer. The thermometer filled with water as the water boiled, and is basically worthless. I didn't read that anyone else had this problem, so it may be just my kettle, but I'll have to do something to stop the leaking if I'm to get any use out of the kettle. Otherwise, it's good, solid stainless.

Buy Fom Amazon Now

Sunday, October 5, 2014

Review of Waring Pro CU55 55-Cup Stainless-Steel Coffee Urn

Waring Pro CU55 55-Cup Stainless-Steel Coffee Urn
Customer Ratings: 2.5 stars
List Price: $190.00
Sale Price: $92.49
Today's Bonus: 51% Off
Buy Now

This coffee maker WAS great! Now, less than a year later, it switches from Brew mode to Keep Warm ("Ready") mode prematurely before coffee is half brewed. It now delivers "coffee-stained" water that is not too warm. I think the thermostat has gone south because "Ready" light comes on rather quickly now and brewing stops abruptly. Good while it lasted; wasted money in retrospect.

Click Here For Most Helpful Customer Reviews >>

I bought 2 of these at the same time, for a catering service. One burnt out within the first couple weeks, at a job site. I had to run to target and buy a cheap 12-cup coffee maker. It made me look unprofessional. A couple months later, the other one burnt out at another job. I had to drive 25 miles round-trip, to pick-up an older urn I had for a replacement. Again, it made me look unprofessional. DON'T BUY THIS GARBAGE. YOU'LL REGRET IT!

Best Deals on Waring Pro CU55 55-Cup Stainless-Steel Coffee Urn

I use 30-100 cup coffee urns regularly for classes that I teach. I purchased two imported Waring Pro 55 cup urns. Just like the other reviews, one of mine malfunctioned after only half a dozen uses, resulting in lightly colored hot water rather than coffee. I have been using WestBend Coffee Urns for many years. You can't kill West Bend coffee urns. I liked the Waring stainless steel because it required much less scrubbing than the aluminum West Bend products. But from now on, my future purchases will be West Bend performance over good looks. My Waring now sits looking pretty but useless, until I place it in my recyling bin, or start using valuable time writing letters to Waring to try to get them to replace it.

Honest reviews on Waring Pro CU55 55-Cup Stainless-Steel Coffee Urn

I Bought one of these to use for parties. So everybody could have coffee throughout the night. What i really use it for now is to brew tea. I put 15 tea bags in the top and fill to about 50 cups with water and have fresh tea for 3 days. I have had this unit for a year now, and so far no problems. I recommend this unit to any entertainer, or anybody that would like alot of coffee or tea.

BE CAREFUL TANK IS SUPER HOT WHEN ITS BREWING.

Find helpful customer reviews and review ratings for Waring Pro CU55 55-Cup Stainless-Steel Coffee Urn

We bought this coffee urn for our Church. It gets used once a week and after a few months it no longer perks. It sounds like it's perking, but by the time the ready light comes on, it still looks like stained water and the grounds are still mostly dry. The instruction booklet says to replace the rubber caps at each end of the tube in order for the unit to continue to brew properly. There are no rubber caps and no available parts on-line that I can find! Perhaps we lost the caps??? I don't know, but we can't even replace them! Don't waste your money, this coffee urn is a dud.

Buy Fom Amazon Now

Tuesday, May 27, 2014

LATICRETE Floor Warming Digital Thermostat Reviews

LATICRETE Floor Warming Digital Thermostat
Customer Ratings: 5 stars
Buy Now
Definitely the biggest bang for the buck. I've used other more expensive thermostats but this one has the most program options and is very easy to test and set up. Completely satisfied.

Click Here For Most Helpful Customer Reviews >>

Monday, April 14, 2014

Discount Honeywell YRLV310A1026/U Digital Non-Programmable Thermostat

Honeywell YRLV310A1026/U Digital Non-Programmable Thermostat for Electric Baseboard Heating
Customer Ratings: 4.5 stars
List Price: $34.99
Sale Price: $28.97
Today's Bonus: 17% Off
Buy Now

I started with one of these and after a month of satisfaction installed four more. It's an easy two wire installation, although you might want to have some yellow wire nuts handy in addition to the red ones that come with the unit. For some of my connections the red ones were too large. The temperature is easy to read and adjust and we have found them to be very accurate. The temperature rarely changes so they keep the temperature in the room consistent. These units are wonderful compared to the old dial and guess style we had.

Click Here For Most Helpful Customer Reviews >>

If you live in a house that uses 240V baseboard heaters with independent thermostats in every room then you really should use these RLV310 thermostats in addition to window plastic (if you have drafty or single pane windows) and ceiling fans on low speed blowing down to the floor to distribute the heat throughout the room. I just spent the past month and a half experimenting to find the most efficient and cost effective way to heat my home here in the Poconos. I was originally using Aube TH115 type 7 day programmable thermostats and, in all honesty, they were lousy! They were too slow to respond and didn't keep the room temperature stable, thus using more electricity than was really needed. I'm disabled and don't work anymore so fiddling with programs doesn't make sense. Besides, I know from experience that all the energy saved when allowing a room to cool for a few hours is needed to stabilize the temperature of that room once it's being heated again so why not just keep a constant temperature. I had one of these Honeywell RLV310 type thermostats in the bathroom and started experimenting with it in the living room, the largest room in the house. Using an inductive power monitor attached to my mains to get real time power usage data here's what I found out.

The Aube units use what I would call 'brute force heating', sending constant current to the heaters until the target temperature is reached and then waiting for the temperature to drop 1 degree before sending current to the heaters again. This allows the heaters to get cold, making you wait for them to heat up again at the beginning of each cycle. This waiting period wastes money, especially when you have 3000 watt heaters and it can add up to a few dollars over a month. The Honeywell RVL310 type thermostats eliminate this waiting period by sending short bursts of current to the heaters and then `regulate' the amount of heat generated in real time by varying the delay between these current bursts. The heaters never get completely cold unless another heat source, the heat of the sun coming through the windows for example, eliminates the need for the heaters or the house is exceptionally well insulated and holds on to the heat well. The RLV310 type thermostats are extremely sensitive and fast acting, making them much more efficient at maintaining a constant room temperature than the `brute force' type thermostats like the Aube. I just installed 3 of these thermostats in the rooms I choose to heat constantly, the living room, the dining room/kitchen and the master bedroom. After only a few hours I feel more consistently comfortable in every one of those rooms. It's 18 degrees outside right now and I'm drawing an average of 2.5 KWh per hour with 8 kilowatts worth of heaters. It's too soon to figure out monthly savings but I do know I'm going to save a bundle over last year. I'm a newbie to mountain winters and while on budget billing I wasn't paying attention to my electric usage. I didn't know the best way to heat this house and, to make a long story short, I just finished paying my balance in time for the cold weather to come around again. ;-)

As an afterword, these RLV310 type thermostats don't have a back light on the display. No biggie for me but it would be a nice addition to future models.

Update:

After more fully evaluating these thermostats I've run into a situation that I think should be addressed. My mail living area consists of two large adjoining rooms that are on separate circuits, Living room and Dining room/Kitchen. For some reason these thermostats will not achieve a proper balance in this situation. One will always wind up driving its heater far too much while the other ends up rarely providing heat. I've tried switching them around but the problem doesn't follow a particular unit, nor does it occur always in one specific room. These thermostats also get very warm when running the heaters at 100% for an extended time. This is on the side opposite the temperature sensor but I suspect it may effect the reading. In smaller rooms with doors these thermostats work perfectly but in this large dual zone area they don't seem to cooperate well. I can't say that this will happen in every house with this type of room configuration, just that it happens in mine.

Also, I need to retract my original statement about programmable thermostats. I originally saw no value in turning the thermostats down, especially during the day, but I failed to consider the drop in outside temperature during the night. Since the house requires more heat when the outside temperature is lower it indeed does make a significant difference when you turn the unused rooms down at least 10 degrees during the colder portion of the day. The longer this period the more energy you'll save. I set them down from 65 to 50 between 9:00 PM to 9:00 AM. This has cut my electric costs by up to 30% on average. During the day when the outside temp is highest there would not be as much of a savings, if any at all.

I still think these are great thermostats. If it wasn't for the multi zone problem downstairs I'd love to see Honeywell create programmable thermostats that use the same method as these to regulate the room temperature.

Best Deals on Honeywell YRLV310A1026/U Digital Non-Programmable Thermostat

I believe this thermostat has a fatal design flaw --at least for our application which is a fairly large room with significant heat loss. I installed this to replace a Honeywell Digital LineVoltPro(tm) 7000 which died after working just fine for several years. The temperature reading for this RLV310 thermostat reads from 1 to 7 degrees below the actual room temperature. (Actual room temperature measured by three different digital thermometers mounted in close proximity to the YRLV310's sensor, all measuring within 1 degree.) One would suggest just lowering the set point, but that doesn't work since the sensed temperature varies so much. Worse yet, the sensed temperature error grows larger as more power is delivered to the heaters; the largest offset occurs when the thermostat is pumping out the most power to the heater. This results in a fatal "runaway" which keeps the heater on indefinitely in our application, even when the room the room temperature get up over 75d and the set point is less than 70d.

Honest reviews on Honeywell YRLV310A1026/U Digital Non-Programmable Thermostat

Be very careful of the wattage rating for your baseboard heating system. I have a larger family room with 3 different baseboard heaters connected in series. The total of the 3 baseboard heaters is 3500 watts at 240 VAC. This thermostat is rated at 3000 watts maximum. Once it is turned on the thermostat goes "bonkers". The indicated room temperature actually decreases!!!! For example if the room temperature indication on the thermostat is say 68 degrees and I set the desired temperature to 70 degrees, the unit calls for maximum heat and after about 10-15 minutes the room temperature indication actually decreases to 65 degrees. The thermostat is pumping out maximum heat and the unit itself actually becomes very, very hot to the touch. Works well in other rooms where the maximum rating of the thermostat is not exceeded. Just do your homework and check your heating system beforehand..

Find helpful customer reviews and review ratings for Honeywell YRLV310A1026/U Digital Non-Programmable Thermostat

I purchased this thermostat a month ago. It was not expensive, looks good. I would prefer it to be a little bit smaller, but it is OK. The installation was easy. It has been working fine. I am using it to control a 180W towel warmer that I am using as an extra bathroom heater. The thermostat specs claim that the load must be larger than (I think) 300W, but it is working perfectly with a 180W load. I definitely recommend this thermostat.

Buy Fom Amazon Now

Monday, February 17, 2014

Best REFURBISHED! C.A.P TMP-DNE Day/Night Blower A/C Fan Temperature Deals

REFURBISHED! C.A.P TMP-DNE Day/Night Blower A/C Fan Temperature Controller CAP
Customer Ratings: 4 stars
List Price: $84.95
Sale Price: $50.46
Today's Bonus: 41% Off
Buy Now

Great product, it is made in the USA. Works great. keeps my temps consistent (+/4*), I use it along with a fan speed controller to lower the noise of the fan when needed. Overall a great product.

Click Here For Most Helpful Customer Reviews >>

So this controller works exactly as advertised. I use it to control 1 small 8" duct fan and a large 10" centrifugal fan that cools down my home greenhouse at "night". During the "day" this controller works in my space as an emergency limit switch should my ventilation / ac fail to lower the temperature below 90F. Quotations around "night" and "day" because in my case "night" and "day" are reversed in my greenhouse as is the case for many plant growers.

If you are thinking of buying this you should know a few things.

(1) To control larger fans capable of being speed controlled only (>400CFM) that operate for longer periods I recommend the TMP-VSc unit over this one. The TMP-VSc automatically winds up and down the fan based on how close you are getting to the target temperature value. The VSc unit is only a little more expensive than the DNe, and in this specific scenario it will save you $ on your electric.

*Most in-line duct fans can not be speed controlled. Some lower quality centrifugal fans such as C.A.P.'s valueline are very noisy when speed controlled. Vortex fans are not noisy and can be speed controlled, just my experience.

(2) You must consider your source air temperature (T_source), source humidity, and set temperature (T_set). FOR GREENHOUSES ALWAYS KEEP T_SETT_outside and the outside air has undesirably low humidity either your going to put your humidifier through a workout or your space is going to get too dry or both.

Best Deals on REFURBISHED! C.A.P TMP-DNE Day/Night Blower A/C Fan Temperature

Got this to automate the day/night temperature differential in my grow tent. It does a good job. I've got it connected to a heater at the moment and it does a great job. I gave it only 3 stars because there is only a 3-4 degree F variance when I place it on 7. Other than that minor problem this is a great unit!

Honest reviews on REFURBISHED! C.A.P TMP-DNE Day/Night Blower A/C Fan Temperature

Not much to be said about this controller. Arrived on time and works great. No rocket science involved with setting this baby up. Have my 6" inline fan plugged in to it and use it to vent hot air from my room. You can also plug an a/c unit into it if you wish instead of a fan.Either way it's worth every penny.

Find helpful customer reviews and review ratings for REFURBISHED! C.A.P TMP-DNE Day/Night Blower A/C Fan Temperature

This is to control an electric heater in our garden shed. It's great because we can use it for both winter heating and summer cooling!

Buy Fom Amazon Now

Monday, December 16, 2013

Buy Honeywell RTH221B Basic Programmable Thermostat

Honeywell RTH221B Basic Programmable Thermostat
Customer Ratings: 4.5 stars
Buy Now
My wife and I are both retired so every day is a 'weekend day'. Most thermostats require multiple settings for different kinds of days. Good idea if you're a worker but bad idea if you're me since going on vacation etc requires MULTIPLE thermostat adjustments. Also, why pay extra for annoying unused features. This thermostat is simple, easy to install and has typical Honeywell accuracy and reliability. For me it's ideal.

Click Here For Most Helpful Customer Reviews >>

Basic programable t-stat. Works well, easy to install Honeywell is a good brand. **HOWEVER in picture on amazon the screen on it looks back-lit, but it is not lit.

Best Deals on Honeywell RTH221B Basic Programmable Thermostat

I bought this thermostat this fall from a big box home improvement store and it's paid for itself several times over in a few short months (and I paid more than the listing price on Amazon).

I had never installed a thermostat before, but it was a breeze to install. I turned off the breakers to my living room, carefully removed the old thermostat, attached two wires, installed a couple of screws (I think that I ended up drilling one new hole), and turned the power back on. Less than 15 minutes from start to finish, and I'm not the handiest gal you'll ever meet. It worked. I set it to turn down at night while we're sleeping and during the day when we're gone. I also put the plastic on the windows, but other than the new thermostat I did nothing different this year than last.

February 2008the portion of our utility bill for natural gas was $188.03. February 2009, with the average temperature just 4 degrees warmer, our natural gas bill was $88.08. We have saved at least $40 every month since I installed it. It's paid for itself several times over. It's probably the best thing I've purchased in a very long time.

Honest reviews on Honeywell RTH221B Basic Programmable Thermostat

I can't believe I waited so long to replace the old mercury bubble thermostat on my hot water heat system. I noticed a friend had a new one, so I decided it was time to do some research here at Amazon.

I wanted a vertical style to match the placement of the old one which narrowed the field considerably. I wanted a simple day/night setback and didn't need separate settings for weekends. I wanted simple controls and ease of temporary adjustment. This one fit the bill perfectly.

Installation was a breeze. The instructions are clear and easy to follow. My two-wire system connected to the Rh (Red heat) and W (White) terminals. The wires weren't that color (probably the original 90 year old wires!) so I either guessed right or, more likely, it would have worked if they were reversed since it's simply an open/close switch to activate the heater. I even reused the mounting screws from the old unit sweet! Stop by your local Dollar Store and pick up a mini screwdriver set if you don't have one.

Programming is straightforward, and again the instructions are clear. It comes preprogrammed with four periods Wake, Leave, Return, and Sleep. It's easy to adjust these to your desired time/temp. I skipped two of them completely by simply pressing the Hold button for four seconds while that period was displayed during setup. Believe me, you'll be tweaking your settings with abandon after the first run-through... it's that easy.

I love the simplicity of the display. What's the current temp? Look at the screen. You're a bit cold? Tap the up arrow once and read the setpoint; tap it again to temporarily raise the setpoint one degree, again for two degrees, etc. The unit will retain your temporary setting until the next programed change (e.g. night setback) or until you press the Run button. Going away for a couple of days? Tap in the desired setpoint and press Hold. Simply press Run again when you get home. As noted in other reviews, there is no backlight in the display.

You can download the installation and user's manual at the Honeywell website to get a peek at how it works.

Be sure to note the Configuration Menu in the installation instructions. I had to change the "Heating Cycles per Hour" setting to "3" (for my hot water system) from the default "5" setting.

What is Heating Cycles per Hour, you ask? It's a means to fine-tune the efficiency of the system's attempts to maintain your desired temperature. It's ONLY active when you're within a degree or so of the setpoint temperature. Here's how it works:

Say, your setpoint temperature is 70°. As the heater brings the room air temp up towards the setpoint, an anticipator circuit cuts off the heat at a predetermined value, say 69° to keep from overshooting your requested 70°. Ideally, the residual heat from your burner/blower/fan/radiator will gently nudge the air temp up to 70°, and all is right with the world. So far we have: temp below 69°, run heater; temp above 70°, stop heater. But what happens between 69° and 70°? What if there wasn't enough residual heat to get to 70°? Or what if your furnace isn't sized properly, or your insulation is weak, or the kids left a window open? Where's that 70° you requested?

This is where you heater starts cycling. My "Cycles per Hour" is set to 3, which means 3 twenty minute cycles each hour consisting of 10 minutes OFF, 10 minutes ON. When the air temp hit 69° the heater stopped for 10 minutes, hoping the air temp will reach the magic 70°. 10 minutes later it takes a peek at the temp... 70° or above? Great! Job done. No cycling involved. Oops only 69.3°? start up again for 10 minutes, shut down, wait 10 minutes and check again. 69.8° this time? Start up again for 10 minutes and another cycle. This time, let's say the temp hit 70° after 8 minutes of heat. Great! job done, shut off heat and stop cycling. It might overshoot to about 70.3° this time well within your comfort zone. Now, sit warm and cozy in front of the TV as the temp slowly falls from 70.3° to 69° and listen for the cycling to begin again. If you're well insulated, it's a fairly mild night, and your heater is sized properly, it might go through a cycle every couple of hours. If there's a blizzard blowing outside your poorly insulated shack, it might cycle on and off every 10 minutes, or even stay on constantly if it can't get you above 69°.

To recap: Temp below setpoint minus one: heater ON. Temp above setpoint: heater OFF. In between: cycle ON and OFF in attempt to efficiently get to setpoint without too much overshoot. Why? A heater is more efficient running longer cycles rather than rapid On/Off cycles. A heater with a lot of "thermal inertia" like my hot water system, takes a while for those warm radiators to gently get the air temperature to the desired setpoint... it needs cycles a bit longer to be efficient and effective. A rapid heat system, like an electric wall heater, will get that air temp up quickly it needs a higher cycle rate / shorter 'burn' time to stay efficient and avoid overshoots. In fact, the cycle rate for electric heat is 9: that's 9 cycles of 6.7 minutes per hour.

Air conditioning cycle/hour is fixed at 3.

One more thing: if you want the fancier model, the Honeywell TH2110D1009 is the same unit, but with backlight, 5/2 day programming, and something called "Adaptive Intelligent Recovery" which learns how fast your heater gets you to your desired temperature so that you can program it to BE at a given temperature at a given time... handy for those early morning middle-of-winter wake ups!

Be sure to properly dispose of that mercury!

Enjoy!

Find helpful customer reviews and review ratings for Honeywell RTH221B Basic Programmable Thermostat

I bought 2 of these units. After letting them sit on the table next to each other for a while, they displayed different temperatures, by a difference of about 3 degrees. I was surprised they were that different. I considered sending them back, but instead I used them as they were. The temperature difference seems to have worked its self out and they do their job just fine. After using one of the Lux models a few years ago, I found myself wanting the extra features that it had (another mode for weekends). The display constantly shows the current temperature but unless you hit one of the up/down buttons, will not show you what the current thermostat temperature is set to. I found this annoying as my wife is constantly changing the temp on me and I would like to know what it is currently set at. The LUX model displayed both. If I had it to do over again I would have bought a different brand, probably Lux. Also, a horizontal model would have covered the round marking that my previous thermostat left.

Buy Fom Amazon Now

Friday, December 13, 2013

Honeywell Fresh Breeze Tower Fan with Remote Control, HY-048BP Reviews

Honeywell Fresh Breeze Tower Fan with Remote Control, HY-048BP
Customer Ratings: 4.5 stars
List Price: $79.99
Sale Price: $47.49
Today's Bonus: 41% Off
Buy Now

I bought one of these fans locally and I liked it so much that I ordered another one from Amazon.

Here are the pros and cons as I see them.

Pros:

1. It pushes a lot of air I can get a nice breeze from as far as 25 feet away.

2. It doesnt take up a lot of room.

3. It is not ugly like many fans are.

4. The remote control with flashlight is a nice feature even though I rarely use it. For the person who complained about one LED being burned out straight out of the box. Only one LED is for the flashlight. The other is for the remote control functions and doesnt illuminate.

Cons

1. The breeze feature is kind of annoying because of the fluctuation of the noise level.

2. You have to hold the remote in a specific postition to make it work. If the fan is oscillating, its hard to find that position.

Click Here For Most Helpful Customer Reviews >>

I have central AC, but my home office is typically a few degrees warmer than the rest of the house. I decided to add a fan to help cool the area off, but I wanted the quietest fan that did the job. I ended up ordering the following three fans through Amazon for comparison:

Lasko 4924 Space-Saving High-Velocity 3-Speed Oscillating Blower Fan (HVB)

Honeywell Digital Tower Fan with Remote and Ionizer

Lasko 42 In. Wind Curve Tower Fan

I'll start with the quick summary for the TL;DR crowd. In terms of air flow, from highest to lowest, the ranking is: HVB >> Wind Curve > Honeywell. In terms of noise, from loudest to quietest: HVB > Honeywell > Wind Curve. Thus, the fan with the best air flow for the noise generated, and the one I picked, was the Lasko Wind Curve.

And now for the details, for those that don't suffer from ADD. Wall of text inc.

Power Usage

I was able to measure power usage for each fan using a Kill-A-Watt meter. All 3 fans had 3 output settings (low/med/high), and I measured their power usage to be:

HVB 95/103/111 watts

Honeywell 32/36/40 watts

Wind Curve 37/41/47 watts

Noise

I used an SPL meter app on my iPhone to measure how loud each fan was at each of those settings. All of the fans were tested in the same spot and the iPhone was placed on a stand about 5 ft away, in front and slightly to the side of each fan, so that wind noise didn't factor into the measurements:

HVB 59/61/64 db

Honeywell 50/53/55 db

Wind Curve 46/49/51 db

Air Flow

I don't have a way to measure each fan's output objectively, so these are my impressions:

HVB Lasko wasn't kidding when they labeled the 4924 with the acronym HVB for High Velocity Blower. When I first got it and ran it on *low*, I was thinking that this would be really good air flow for a quality fan on its *high* setting. It's by far the highest output fan here. They also described it as having a quiet motor; while this might be true, it's still the loudest of the bunch. Having the smallest vent opening of the bunch might have contributed to the noise level. Another user review I read of this fan said it feels like AC with this fan running, and that's true. If you're partially deaf, or plan on placing the fan 20 ft or more away from you, this is a good choice.

Honeywell and Wind Curve The output of these two fans are more comparable. I still feel the Wind Curve puts out a little more air flow than the Honeywell at the equivalent setting though. For some reason, even the Wind Curve feels like AC is running, if only on low. There's an uncanny cooling effect the Lasko fans have that the Honeywell doesn't. Maybe it's just better airflow at a lower noise level. If you look at the measurements above, the Wind Curve on high is only slightly louder than the Honeywell on low. I mostly ran these fans on low--as I was looking for the quietest solution--and at times, I still felt warm with the Honeywell, but the Wind Curve delivers. The Honeywell does have a filter on the back intake side, which probably hurts its air flow a bit. You can hear a *very* slight ticking sound from the Wind Curve at times, sort of like fast crickets. I haven't found it annoying and it doesn't sound like something's wearing out. It's probably only noticeable because of its low noise level.

Size / Weight / Appearance

Exact dimensions and weight can be found on their Amazon product pages, so I won't provide specific numbers. All of them were delivered in their product boxes, which were all somewhat beatened up from being delivered by UPS.

The HVB is the shortest, but also the heaviest. Both the Honeywell and the Wind Curve are noticeably lighter than the HVB. It's shipped as a single piece and there's nothing to assemble. You take it out of the box and it's ready to go. It has a low center of gravity and stands up stably. All tower fans should be designed this way. It has horizontal flaps that can be adjusted to direct airflow up. The flaps are really small, but they seem to work decently.

The Honeywell is about a foot taller than the HVB. It's shipped in 5 pcs that have to be assembled--the main body, 2 pieces that join together to form the circular base, and another 2 pcs that join together to form an "optional" pedestal that sits between the base and the body. I wouldn't really call the pedestal optional, as without it the vent opening starts about 5-6" off the ground and there are no flaps to adjust the airflow up. I found assembling the unit difficult to do by myself. It's just not easy holding these pieces so they line up while you screw them together. In fact, little plastic fragments broke off while I was assembling it. I assume they were all internal and non-essential, as the product looks fine once assembled. The manual cautions that using the pedestal makes the unit less stable, and that is true. It's the wobbliest of the bunch, but it won't tip over easily. A sturdier base and pedestal would have made this a lot less wobbly. The black plastic in the product pictures looks really nice and shiny, but not as good in person.

The Wind Curve is a few inches taller than the Honeywell, making it the tallest of the bunch. It's shipped in 3 pcs--the main body and 2 pcs that join together to form its circular base. Assembling this unit still wasn't easy to do solo, but it was easier than dealing with the Honeywell and its body-pedestal-base. The base on this feels a little sturdier than the Honeywell's, and the assembled unit is less wobbly, though still not perfect. There are some horizontal flaps to direct the airflow up, but these only cover the top third of the vent. None of the online pictures I've seen for this fan do it any justice. The wood accent makes the unit look really nice in person.

Controls

The HVB only has physical controls. There's a knob that controls the fan speed, from left to right: low-mid-high-off. There's a separate push button that turns the oscillation on/off. There's no remote, no timer, and no ionization function.

The Honeywell has digital controls and comes with a remote. There's an LCD window that shows the air temperature, fan speed, and timer. It has one nice ability that neither of the Laskos have, and that's the ability to turn on/off at a preset temperature, just like the HVAC system in a home. Although the controls are all digital, half of the six buttons have shared functions. There's a single button that controls the fan speed and turning the unit on/off and it cycles from: high-med-low-off. So if you want to turn the fan on and run it on low, that's 3 clicks. There's also a single button that controls oscillation and ionization, and it cycles between: oscillate only-oscillate & ionize-ionize only-neither. The third shared function button controls how the unit turns off, either by timer or temperature. The timer can be set in 1 hr increments, from 1-12 hrs I believe. Two buttons are labeled up/down, which can only be used for setting the timer or temperature. The last button is for a "breeze" feature that is unique to this fan, which essentially just varies the fan speed. There's two breeze modes, one varies the speed between the current speed and the next setting below it (high-med, med-low, low-off), and the other just varies the speed between high-med-low. I found the noise level changes from this feature to be too distracting. The remote has five of the six buttons that the unit has, lacking the button to enable the timer/temp mode. Oddly, up/down arrows exist on the remote, but are only useful if you're already in the timer/temp mode. However, if you're using the remote, chances are you can't read the display to see what the timer/temp setting is anyways. The other side of the remote has a button which controls an LED flashlight.

The Wind Curve also has digital controls and comes with a remote. There are a total of 8 leds displaying the status of the fan, from left to right: 4 red leds indicate that the timer is enabled and how much time is left--representing 30 mins, 1 hr, 2 hrs, 4 hr (you add them up to get the total); 3 green leds indicating the fan speed--low, med, high; and 1 blue led indicating whether ionization is on/off. There's 5 buttons controlling the fan, the same on the unit as on the remote--power, oscillate, timer (adds 30 mins to the timer with every click), ionization, and fan speed (cycles between high-med-low). I like that there's a separate control to turn the fan on/off and the fan speed is remembered. The timer setting is a little primitive compared to the Honeywell's though, as it does take 15 clicks if you want the full duration of 7.5 hrs. All of the controls are confirmed with a beep. I think I read a review where someone complained it was too loud, but I found it really faint, even compared to the fan on low. The click of the button on the remote is louder. Although, the confirmation beep for turning the fan off is a little long--lasting about a second--and that could be shorter.

Oscillation

All of the fans have this feature and were quiet enough that I can't hear the difference whether on or off. The Laskos oscillation range appeared to be a little under 90 degrees. When placed in a corner, I don't think anyone would complain about the coverage. The honeywell's oscillation range was a little wider, but it oscillates in one direction a little faster than the other. Sort of like how some sprinklers operate, but the difference in speeds isn't as drastic.

Ionization

The HVB lacked this feature, but I consider it a gimmick anyways. From what I've read, ionized air doesn't freshen up the air, it just impairs your sense of smell. Ionizing air cleaners also operate by charging the air and dust with one charge, and having an oppositely charged plate or filter in front of the air flow to catch the charged dust. Neither of the fans with ionization features have this plate/filter.

Best Deals on Honeywell Fresh Breeze Tower Fan with Remote Control, HY-048BP

This is a wonderful fan. It takes up little space, circulates a lot of air, has a larger oscillating range than others I have had, and is very quiet. The remote is a nice bonus, since you can make it stop blowing on you without having to get up. The only down side I can think of is that the fan is so low to the ground; if you like feeling it on your face or do not have an open area to put it in be prepared to have to put it on top of something such as a desk or table or consider finding a standing fan instead.

Honest reviews on Honeywell Fresh Breeze Tower Fan with Remote Control, HY-048BP

I am not entirely sure if this is what I have but it looks identical. (My Model #: HY-047B) From my experience of using several tower fans, this Honeywell product is excellent. It pushes a lot of air quietly and oscillates in a wider angle compared to the tower fan from Lasko. Its look is decent but if you prefer a fancier fan, I would recommend Lasko 42" Wind Curve though it doesn't circulate as much air. (I have recently bought this Lasko fan and returned it because it is not powerful enough; its third level of wind speed is only equivalent to the first level of this Honeywell fan.) In addition, I like that this fan comes with a filter that can be easily washed and reinstalled. I would consider this a four-season fan because its three levels of wind speed fits my needs all year round unlike the Lasko 42" Wind curve, which I would consider it as a winter fan, and Nexus Tropical Breeze, which I would call it a summer fan because it pushes unbelievable amount of air to great distances. I plan to buy another Honeywell 3-Speed Digital Tower Fan soon.

Find helpful customer reviews and review ratings for Honeywell Fresh Breeze Tower Fan with Remote Control, HY-048BP

(2008 HOLIDAY TEAM)The Honeywell 3-Speed Digital Tower Fan with Ionizer uses up a very small amount of real estate because of it's sleek tower design. The features included with the fan are great. While the price is not easy to swallow, the performance makes it seem justified. Definitely check this out.

Pros:

+ Takes up a small amount of floor space

+ It has surprising air-power, especially on high

+ It has an attractive look with the black body and chrome accents

+ The included ionizer, oscillation and breeze settings give you a lot of options

+ The remote control has a convenient light for night use and all the controls to power and adjust your fan

+ Remote also has a cool resting place on top of the fan

Cons:

The base isn't as firm as it could be, and the fan will sway if you push it; move it seldom and carefully

The noise is noticeable when the fan is on high

Remote has a limited range

Some functions require multiple clicks with the remote (no big deal)

I can't help but be nervous when I read about bad tech support or short lived products; mine is still going strong

Last year I bought and had a terrible experience with the Holmes HASF-99 10-Inch Velocity Blizzard Stand Fan, which is no longer sold by Amazon and now only seems to be sold by third party merchants. After every supporting piece on that fan broke away from minimal use, I thought I would move up to a better brand at any cost. That's the only reason I would spend $60 or $70 for a fan.

So far it's been worth it. It is just a fan, but the ionizer is a nice feature even if I'm not totally sold yet that it does much. The remote is very handy, and the looks can't be beat. Best of all, this fan has kept working and creates an awesome air flow.

While the height is not adjustable, the tower design only takes up a small floor area. This fan is light and easy to move around too, unlike the Holmes fan.

These days there are more options in fans available. If you are looking for a circulation fan as opposed to a tower model, there are other options. I haven't tried all of those, but just do your research with a grain of salt for the info that's out there.

Versa-Kool 12 Inch Circulation Fan 12 Volt

Hunter 90021 Century 12-Inch Performance Oscillating Fan

Honeywell HFS641P 16-Inch Remote Control Stand Fan

I was lucky enough to get a small discount for this item on sale, but now that summer is in full swing don't expect to pay much less than these prevailing prices.

If you need a reliable fan though this is well worth it. Even with AC, it's nice to have something to circulate the air.

Enjoy.

Buy Fom Amazon Now

Monday, October 28, 2013

Cheap Sunbeam MA7200-030-000 Royal Warmth Heated Mattress Pad

Sunbeam MA7203-030-000 Heated Electric Mattress Pad, Queen
Customer Ratings: 4 stars
List Price: $87.20
Sale Price: $69.95
Today's Bonus: 20% Off
Buy Now

This works better than the electric blanket. A few hours before going to bed I turn it on to about 5 and turn it off once I'm in bed and the warmth remains til the morning. Also I don't have to have the thermostat on so high which can be uncomfortable. Now every bed in the house have one for the winter and it works wonders!

Click Here For Most Helpful Customer Reviews >>

This is my first time using a heated mattress pad, and I'm pretty satisfied with it. It has 10 heat settings and an Off button on each control, separate controls for each side of the bed. The padding is light and I can feel the wires that're about 3mm diameter. Since I have a mattress pad already, I put it under my own mattress pad and I don't feel the wires anymore. This also keep the heat milder, which I like. I turn the heat setting to Hi 40 minutes before bed and turn to Low when I get in bed, that keeps me warm throughout the night. The reason I give it 4 star is due to a few' It's warm under the pillow which I don't think is necessary for energy saving purpose' power plug isn't at head side of bed but at foot side (I followed instructions and made sure the orientation is correct); wire is kind of big; control isn't stable on night stand due to its light weight and big wire attached to it; control is warm even when turned off (still using electricity). After all I paid $68 for King size, I'd say it's a product with good value!

Best Deals on Sunbeam MA7200-030-000 Royal Warmth Heated Mattress Pad

Great product. Makes sleeping and waking much easier. This will help with the home heating oil bill. What a comfy way to snuggle up!

Honest reviews on Sunbeam MA7200-030-000 Royal Warmth Heated Mattress Pad

My soft-sider waterbed heater doesn't work anymore and I decided to try this product. Wow! It's nestled between the featherbed and the attached pillow topper. Thirty minutes before retiring I turn it on and when I get into bed I'm so comfy. I set it at ten at first,then turn it down to five. Regarding the complaint about the controller, since I no longer even tuck in the ends of my top sheet, I just dangled it at the foot end. No lump to bump into. Who wants their pillow heated anyway? Obviously, I didn't use the portion that would usually be snapped into place around the bed. The pad stays flat because of the compression it gets from the featherbed. I have a queen-sized but only ordered the full. I don't have to heat the edges of the bed. The warmth from the pad radiates enough.

Find helpful customer reviews and review ratings for Sunbeam MA7200-030-000 Royal Warmth Heated Mattress Pad

My son is very cold-natured, and doesn't like cold beds. I tried flannel sheets, warm footie pajamas (he still sleeps with both)and he has a warm blanket-he still complains the bed is cold (mainly when he get's in). I have an electric blanket on my bed, which he discovered one day. He loved it so much, I let him "borrow" it that night. I planned to order a second electric blanket so we would both have one, however I discovered online that it is dangerous to let young kids sleep with electric blankets mainly due to the blankets getting crinkled upthe wires can get damaged and bent, so it's a fire hazard. Yikes! I went and turned his blanket off for the night as soon as I read that, next I ordered this heated mattress pad for him. The next morning I saw that the electric blanket he had slept in had indeed become quite wrinkled and bunched up in his bed, so I knew the heated mattress pad was a better choice for him.

This heated mattress pad really is the perfect solution for him. I pre-warm his bed before he gets in, then turn it off (or sometimes on the lowest setting) for the night. When he first gets in the bed, the gentle warmth is soothing to him. He snuggles himself into a cozy position and says, "aaahhh I love my bed," and for what it's worth to other tired mothershe actually lays still, and GOES TO SLEEP!I no longer have to pray to the nap/sleep gods like I used to ;) Unlike a blanket, I don't have to worry about it getting twisted up, and the fit is perfect: it fits securely over his deep pillow-top mattress. I put a thin, waterproof mattress cover over the heated mattress pad to protect it. (

Buy Fom Amazon Now